Can't set up netgear wndr4000 router on IPad

I set up a new netgear wireless router & am having problems setting it up on my ipad.  It pulls up the network name but then when I select "join" it brings me to a screen to input ip address, subnet mask, router, dns, client id - none of which can be input (won't actually insert anything).  On all of my other devices, I only had to enter the password.

It sounds like you just got to the status information screen for the connection. Do you have DHCP, BootP and Static tabs? Do the values in the fields look like valid IP addresses?

Similar Messages

  • Can I set up a wifi router to receive an internet signal by connecting it to a computer?

    Can I set up a wifi router to recieve an internet signal by connecting it to a computer?
    It seems to me that routers are designed to connect directly to the internet by programming their firmware with connection info.
    I'd like to connect a computer to the internet, then connect a router to that computer.
    Essentially, I want a internet signal that comes through a computer before being made wireless. Is that possible?

    To connect the computer to the Internet you still need some physical component, for example a wireless USB dongle. So if you want to have the Mac connecting to the Internet and then share this connection to other devices using wireless, then you can enable Internet Sharing on the Mac and select to share its Airport (wireless) connection to the other devices (which turns the Mac into a form of access point). Then the other wireless devices can connect to the Mac and use the Mac's Internet connection, which could be a wireless USB dongle or an Ethernet connection to a cable modem.

  • TS1398 I can't set up wifi on my new ipad.

    I can't set up wifi on my new ipad. It won't connect to the network. Wifi is working on other devices in the house.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How can I set up group contacts on my IPad Air?

    HOw can I set up group contacts on my IPad Air?

    I Don't know if you can or not.
    but you could try one if these 2 things:
    -under a new contact in name type the names of the people. Next, I'm not sure if this will work, but for phone just put a different hone down.
    -Also tou could just make a group message. In messages just type all the names in the to field after you tap compose.

  • Can I set up 2 IDs on one iPad?

    Can I set up 2 IDs on one iPad so we can both keep track of stats on games.  If so, how do we do it?

    Unable to setup more than one Apple ID with Game Center without having to log out/in all the time.

  • TS2972 Can I set up home sharing using my ipad only - my computer is broken?

    Can I set up home sharing using my ipad only - my computer is broken?

    I believe the first requirement of home sharing is a computer using the latest version of iTunes http://www.apple.com/support/homesharing/getstarted/

  • Can I set an Audio Alarm in my IPad? If the answer is yes, then how do I do that?

    Can I set an Audio Alarm in my IPad? If the answer is yes, then how do I do that?

    Put an appointment on your calendar and set it with audible alarm.
    THere are also apps, I have one called Alarmed, and you can set an alarm, for example to wake you up. Not sure how it works if you've closed the app though.

  • Can I set up a second router (extreme or express) with WEP while keeping 802B,G,N on the primary router (TC)

    I have a wireless temperature controller which only uses WEP security. I have my TC configured for 802.11 B,G,N which disables WEP. Can I extend or create a new wireless network which uses WEP while maintaining my current network configuration?

    Yes, this is extremely easy..
    Get a wireless router or AP.. anything cheap will usually be fine.. you don't need fancy. And if it is G or B wireless then a second hand is also fine.
    For a wireless router you can bridge it, if that option is available.. usually not.
    So you do a sneaky work around called wan bypass.
    It is easier to give you actual situation.
    TC running standard IP 10.0.1.1
    Set up the WEP router with IP, 10.0.1.254 (puts it outside the range of dhcp in the TC and will never be used).
    Turn off the dhcp server.
    I do suggest you set a fixed wireless channel,, so it doesn't interfere with the TC.
    eg 1, for 2.4ghz.
    Then plug LAN port of the router to the LAN port of the TC by ethernet.
    Voila, you have a secondary AP and can set poor security on it.
    *** DANGER DANGER WILL ROBINSON***
    You have just reduced the security of your whole network by creating a loophole.
    I would strongly recommend turn it off when you finished playing on your Wii or whatever ancient device that uses WEP.

  • Can I set up folders in pages on iPad?

    how can i set uo pages folders?

    You can create folders in iOS Pages in a manner similar to creating and using Folders as described in Chapter 3 of the iOS User Guide found as a special bookmark in Safari. Well worth reading.
    In Pages Document View (where you see thumbnails of each document) tap on a document and drag it over another document to create a folder. Additional documents can then be dragged into the folder. To remove a document in a folder, tap, hold then drag out of the folder.
    There are limits: each folder can only hold 20 documents and you cannot nest folders or place a folder inside another folder.

  • How can i set up mail rules from an iPad?

    I am familiar with using rules to filter email.
    From my Mac at home I acces iCloud.com and have no problems.
    I went away for the long weekend, and brought only my iPad.
    I started receiving spam from a new source and wanted to filter it out.
    From safari, when I go to iCloud I only have three choices, none of them useful.
    I have tried to use different URLs but always get redirected to /ipad_welcome/
    Is there a way to do this?
    Or does the post-PC device still need a PC?

    I think there is not a good solution for it (yet). The best solution is to check if you mailserver provides a spam filter solution. I use Gmail and it provides a filter on the serverside. This means the mail is filtered befor I receive it on my iPad (and iPhone). You can also set up a gmail account as a exchange and push all the filtered folders.
    Cheers
    Gmail exchange set up:
    http://support.google.com/mobile/bin/answer.py?hl=en&answer=138740

  • Can I set child lock for safari on iPad?

    Can I set child lock for safari on my iPad? Is this possible?
    I have an ipad mini

    Sorry, no. What you can do is enable restrictions, which you can use to lock out all access to safari (just dont' forget the passcode you use to enable this) and then unrestrict when you want to use Safari.

  • Help! Can I set up desk jet 2540 on iPad

    Hi can anyone tell me if I can set my deskjet all in one 2540 up on my iPad mini? I don't have a disc drive to put the setup cd into and the installation website it gives you in the box just comes up with an error, I think maybe because I can't set it up from my iPad?

    Hi Bellesy,
    There are several ways of printing from your iPad. We just have to make sure that the printer and the iPad are connected to the same network.
    Check this link: Printing Over a Wireless Network with Apple's AirPrint FAQs

  • How can I set up source IP routing

    This is on a recent Macbook Pro, OSX 10.8 Mountain Lion. Maybe the question really belongs in a "networking" or "operating system" subforum.
    A Linux example is:
    ip rule add priority 32700 from 10.45.37.70 table 240  
    ip route add default via 10.45.37.69 table 240  
    ip route flush cache  
    It routes all packets with source address 10.45.37.70 via 10.45.37.69 as default gateway, regardless of destination address.
    Why is this needed? --->
    I have a few physically tiny Wifi routers. They can only act as NAT routers, and even block connections between internally connected devices. No problem, if I need a device to act as a server (VNC, sendmail, samba, webserver...) I set up a vtun (actually any VPN would do) between the device and a VPN server on my LAN. This way, the device gets an IP address that is reachable from my entire LAN. I can walk away and access the laptop from a smartphone, for example. And I can move data between 2 laptops while on wlan.
    Outgoing connections should continue to use the normal wlan gateway. If everything would use the vtun gateway, that would cause a lot of unnecessary load on the  server.
    The source IP routing affects only reply packets to connections that come in via vtun VPN. The replies have the above mentioned source address that triggers the special routing. Without the special routing, the replies would be mangled by the NAT router.
    I have, on a different VPN (lets call it "VPN2"), seen an alternative. This different VPN sets an additional default address, and according to a forum post I found, related to Snow Leopard, this would automatically select the best route based on source address and local links. This does not work well for me in the case of my VPN2 (everything goes down VPN2, it shouldn't), but maybe it will help in the vtun problem? Are multiple default gateways ordered in some way that affects routing?

    Yes, you can SPAN multiple ports, or multiple VLANs. This will SPAN ports 5/1 through 5/5. The spaces on either side of the dash are necessary.
    monitor session 1 source interface fastethernet 5/1 - 5/5
    http://www.cisco.com/en/US/products/hw/switches/ps4324/products_configuration_guide_chapter09186a008023401a.html
    Please rate helpful posts.

  • How can i set up two different users on Ipad mail

    I would like to set up two separate email accounts on the new Ipad Air.  Two people will be using the Ipad for their internet connections.  They have no other computer.  I have one Yahoo! mail account completed and have the Yahoo mail app installed but this app is awful for a beginner to use.  I would like to have both access their mail under the mail icon on home page. 

    You can configure as many email accounts as you want on the native Mail App however, you cannot separate them or log out of them so one user will be able to see mail from the other user's account.
    I would suggest you look for a 3rd Party Mail account that can do this for you, as the Native one is simply not designed for multiple users.
    Alternatively you could simply put a link to Yahoo's webmail page on the Home Screen and have them log in to that when they need to.

  • Can I set up home sharing from my iPad? Or does it need to be a "real" computer?

    I'm trying to set up my new Apple TV on home sharing.  I'm doing it from my iPad.  When I go into iTunes from my iPad, it doesn't give me the "advanced" option.
    Do I need to set this up from my PC?

    Welcome to the Apple Community.
    Yes you can set up homesharing on your iPad (settings > music), however the library won't display on the Apple TV as it does from itunes on a computer. Use AirPlay from the ipad to play music from it on the Apple TV.

Maybe you are looking for

  • The application was unable to start correctly (0xc000007b)

    I have a subscription to Adobe Creative Cloud and recently installed all apps. They all worked fine until I recently installed iLivid - big mistake! (at least I think this is the culprit from other articles I found). Now I can no longer use Illustrat

  • Logging into the imap server failed after creating OD Master

    I should have left things alone.... I have an OD master 10.5 server on the network that my local clients point to. To use the 10.6 server which houses mail as a TimeMachine backup, I created it as another OD master. For some reason (thankfully) my e-

  • Macbook Pro vs. Macbook

    Hey Everybody I want to upgrade my iBook G4 to a Macbook Pro. I use Final Cut Express and my computer just doesn't cut it anymore. But, my brother just got a 2.2 GHz Macbook, and I started to question my choice. If anyone could give me some advice, t

  • BEx Analyzer version problem

    Hi all, We are having a problem with RRMX and the BEx Analyzer version that it's launching. We are running BW 3.5, and all our workstations have both BEx Analyzer 3.5 and BEx Analyzer 7.0 installed. SAPGui version is 6.40 SP26, BEx Analyzer 3.5 has S

  • Restore and recover tablespace(s) in another db using RMAN

    Hi, I'm using Oracle Standard edition 11gR2, actually that's why I'm posting this thread because I can't use TRANSPORT TABLESPACE feature. I need to restore and recover two tablespaces, backed up in source database in another database. The destinatio