Can't set up new Airport Express

My old Airport Express dies so I buy a new one. I use the Airport just for connecting to my stereo for itunes etc. Plug it in right by the computer and get the flashing amber light. Go to the set up assistant and choose 'Set up a new Airport Base Station' and get the message 'No new Airport networks were found'.
I also have a separate Netgear network to connect with my laptop. This set up is connected to the cable box then to the computer via ethernet. No problem with this.
The problem seems to be that the old and/or new Airport Express station does not connect with the Airport Extreme card in the computer. At least it seems the computer doesn't see the Airport Express even though it is right in front of the computer. When airport is on the icon shows strong broadcast signal.
Anyone have a clue?

Thanks for suggestion - but. Connecting direct via ethernet gives exactly the same results. Computer doesn't see Express therefore there is nothing to configure. I am at a total loss and about to give up. Maybe there is another product that would be compatible with Mac that I could try. I guess it is also possible that the new unit is also bad.
I have a love/hate relationship with computers and right now the hate side is taking over. I hate it when things don't work.

Similar Messages

How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
Thanks

No more meseges.
في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
New discussion activity
Bob Timmons has posted in the AirPort community.
How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
To post a reply, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

I have the airport express as router can I buy the new airport express and extend my net?

Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands. The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

Can't set up "older" Airport express as booster for "new" Airport network?

I upgraded to a new airport express (the 802.11n) and want to use that as my primary airport in my house. I have an older airport express that keeps giving me error setting up as a WDS when I reinstall the factory settings to set it up as a booster. Is this an impossibility or am I just missing a step? Thanks.

I was having trouble having the network name show up in the which-network-to-join window. It would be blank and then give me that error message.
In a WDS configuration, you do not use the "join an existing wireless network" options.
The following are the basic steps:
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup - 802.11n AirPort Express Base Station (AXn)
o On the Mac click the AirPort status menu in the menu bar, and then, choose the wireless network created by the AXn.
o Open AirPort Utility; Select the AXn, and then, choose Manual Setup from the Base Station menu.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the AX.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - 802.11g AirPort Express Base Station (AX)
o Click the AirPort status menu in the menu bar, and then, choose the wireless network created by the AX.
o Open AirPort Utility; Select the AX, and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.)

How to set-up new Airport Express to extend range of Airport Extreme

Purchased a new Airport Express to use it as a range extender on existing home network with an operating Airport Extreme base station. While I've read instructions, I'm unclear whether the Express needs to be connected by ethernet cable for its initial setup, or can I simply plug it and initialize it wirelessly onto the same household network? (I've tried the latter but without success).

to edex67 and Bob Timmons:
My objective is to extend the wireless range of the Airport Extreme base station wirelessly - so I do appreciate that the Airport Express would needsto be located haflway between the base station and the "dead zone" area.
The suggestion of using a Powerline ethernet connection to the Airport Express has merit (especially as I have one available).
I continue to use OSX 10.6.8 - does this affect my set-up in any way?
My problem had been - and remains - how to configure the Airport Express in range extend mode - I did click these boxes on both the Extreme base station and the Express, however the Express still has flashing amber lights and error codes - one indicating no internet availability on the Airport Express.

Using my Actiontec modem's wifi, it doesn't find my new airport express. When I use the new airport express network I created error message says ip address is wrong. Help setting this new airport express up

Using my Actiontec modem's wifi, it doesn't find my new airport express. Using the new airport express network I just set up it says the ip address is invalid. What can I do to overcome this blinking amber light and error messages?

You need to begin by configuring the AEX to Join an existing network (Bridge Mode.) You can then connect to it using Wi-Fi, but the AEX will not extend your existing network.
If you can connect the AEX to your existing router using Ethernet, then you could use it to Create a new network. Otherwise, if you want to extend your existing network you will need to get a Wireless Access Point - WAP - from a non-Apple product like D-Link.

Can I Set-up new airport Extreme w/PC?

I know the old APs you could not setup with a PC...can you with the new Airport Extremes? My wifes office is looking at routers and I am pushing this one but they are worried if her Mac is not in the office they would have no way of changing settings etc.
So are they out of luck or is there some official (or hacky?) way of setting up and/or changing the new AP Extreme with windows?
Also I assume print sharing works with PCs over the Airport network right?

I know the old APs you could not setup with a PC...
Not true. The round 802.11b/g AirPort Extreme base station (AEBS) and AirPort Express (AX) could be configured from Windows using the Windows version of the "AirPort Admin Utility".
...can you with the new Airport Extremes?
Yes you can configure the new square 802.11n AEBS using Windows. The Windows version of the "AirPort Utility" is on the disc shipped with the AEBS.

My iphone 4 can't see my new Airport express

I got a new Airport Express this morning because my old wireless router died. I had no problems setting it up and getting my MacBook Pro and iPad to it, but my iPhone 4 cannot see it atall. Any suggestions?

Not sure what happened, but this issue resolved itself after I looked at all the settings in the Airport Utility on my MacBook Pro and reviewing the network System Preferences, but making no changes. Working great now.

Can't configure a new Airport Express or my old one

Hi,
I just purchased a new Airport Extreme today and I cannot get it set up. I keep getting an error message that states "An Error Occured While Reading The Configuration"(Make sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. -5). It also gives me the same error message when I try to re-configure my old Airport Express. I've tried numerous re-sets and have tried connecting it to my Airport Extreme Base Station(802.11n) via ethernet to no avail. I also tried to install a firmware update on my new Airport Express but that failed shortly after the download. I was hoping the firmware update might fix the configuration error. I use the Airport Express's to extend my network and have successfully set these up before so I don't know what the problem is. I'm using an iMac 3.06, on OS 10.7.1, which is connected to my AEBS via ethernet.
Thanks!

Hi @Chris_Stokes
I am sorry to hear about the troubles you are experiencing with your Deskjet 2050 series printer. Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or Prin....
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I CAN'T SET UP MY AIRPORT EXPRESS!!!

So... I open airport utility... It detects my airport express(with difficulty)... I set up my airport express to join a network(WPA) and when I press update... It starts updating but at the end it says it couldn't find the apple wireless device..
I tried so many times- I reset my airport ; I restarted my router(HUAWEI HG655b); etc.
PLEASE help!
Thank you a lot in advance!

HellO:
I suspect you have some sort of password/security issue with yoru router.
Barry

Trying to set up new AirPort Express to stream music

I just purchased Airport Express in order to use our home stereo system with our iTunes located on another computer. I am not techie at all but usually can follow the directions with no problem! It looked like all I had to do was plug the AirPort Express into the wall and hook the line out port to my speakers and it would pick up my wireless network. Well nothing has happened. I have read all the info in the discussion board but cannot find one that is exactly my problem. When I open AirPort Utility on my main computer it says it does not detect any AirPort wireless device. I have a cisco linksys router. All my other computers in the house work fine on this router so I know this is working. Do I need to purchase a AirPort Extreme?
Can anyone help me with very simple instructions as to what I need to do to get this to work?
Thank you.

Hello Shookie43. Welcome to the Apple Discussions!
By default, the 802.11n AirPort Express Base Station (AXn) will perform as a wireless router. Which is not exactly what you would want in this situation. I am assuming that you want to use the other wireless router for Internet access and only use the AXn for iTunes streaming ... correct?
If correct, then the following would be the basic steps to configure the AXn to do so:
Either connect to the AXn's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AXn, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <enter the Network Name or select the existing wireless network from the drop-down menu>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Issue setting up new Airport Express on OS 10.8 and Airport Utility 6

My network is a lastest model Airport Extreme and computers running 10.8 Mountain Lion. I needed to extend my wireless network so I purchased the newer model Airport Express.
Using Airport Utility 6, I followed the screen prompts to extend the network and get 99% complete (screen prompts find the network to extend, join the network, and then begin to apply configurations to the Airport Express). It is during this last stage the configuration of the Airport Express fails, the light starts blinking amber and I get an "unreckognized error" in Airport Utility. No further information. I tried soft reset and factory resets on the Airport Express several times with the same result.
I have another computer still running 10.7 Lion and Airport Utility 5.6 and after another reset, figured I'd give it a try. I was able to connect to the Airport Express, configure it to extend the network, save the configuration and the status light turned green on the first try.
Not sure what's going on with OS X 10.8 and Airport Utility 6 but maybe this will help someone else get their network up and running.

The first AirPort Express was introduced only nine years ago, not thirteen, but nevertheless, that's pretty old. Mountain Lion has features that will not work with an Express that old.
Nevertheless, it remains a perfectly functional device and still does everything it ever did. Use the technique described in this thread: I can't install airport utility 5.6

HT4260 Can I use a new airport express to extend a network?

If I am using an AirPort Extreme as my main wifi, but it is in bridge mode because I already have another router setup in dhcp on my network, can I use an airport express to extend my network, but use it hard wired?

can I use an airport express to extend my network, but use it hard wired?
Yes, assuming that you are asking about a new Express, or the 802.11n version.
This is very easy to do with the Mountain Lion operating system that you have.
(The "roaming network" link above assumes that you are using the Leopard or Snow Leopard operating system...although the general information there is good).
Connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the AirPort Express.
Power up the AirPort Express and wait a full minute
Click the fan shaped AirPort icon at the top of the Mac's screen and look for the heading of New AirPort Base Station. Just below that, click directly on AirPort Express there
AirPort Setup will open automatically and take a minute to analyze your network and then announce that the Express will be setup to "extend" your AirPort Extreme network
Enter a device name for the Express and click Next
AirPort Setup will take another minute to configure the Express
When you see the message of Setup Complete, click Done
That's it.

HELP! I can't set up my airport express

I just bought the airport express yesterday and was very excited to get it because we go away alot. I tried setting it up and thought I was doing great until it said I have the wrong server name
I had a few questions
What is a server name
and what password do I use
after I did all of this it took me to a different screen, so I was just wondering how you would get back to the original screen.

I have my my express hooked up to my bellsouth modem. I have tried to return it to the factory settings and that didn't work. I have read the manual briefly.

Can't set up new Airport Express

Similar Messages

Maybe you are looking for