Can't set up share point for external drive on Xserve
I have an iomega 2TB drive connected to an Xserve. I can not seem to access the ext. drive from a client machine. I've been able to do this in the past, now it doesn't show up as one of the mountable drives when I connect to server.
I CAN see it if I remote in to the sever. On the server desktop, the ext. drive is mounted. I can access it there, see folders inside and everything. However, if I look in the Server app, from a client machine, the ext. drive shows up in the list of volumes, but the disk space bar is all gray (no green, yellow or red) as if it's not readable. I know this is kinda hard to describe, but the bottom line is that I can't access my ext. drive that is attached to the Xserve.
Alex has hit all the right notes in his response and the one that I'd agree with would be the planning. It's not uncommon to hear stories of firms putting SharePoint in, before they get around to thinking what to do with it. It is a collaborative
product that can provide answers to defined problems.
On the SharePoint workspace issue, my personal thought would be give it a miss. It doesn't have a 2013 version and it'll be pointless giving this to your user base, only to have to remove it depending on what your settled SP plans might be.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.
Similar Messages
-
Installing office 2010 - should I set up share point for users
I have just upgraded from office 2003 to office 2010. We are limited to 2010 because of some legacy programs.
Anyway this is my first install of office 2010 that eventually I need to install on 40 or 50 computers. After it is installed there appears a menu item to set up sharepoint. It says "Welcome to Sharepoint Workspace" "Create a new
account" when I click Next it asks me to "Create an account using your email address" and so on.
We do not have a sharepoint server, I also know almost nothing about sharepoint. We use Exchange 2003.
Here are my questions,
Can I create a sharepoint account without having sharepoint server?
Is there any advantage if I can install it?
If having SHAREPOINT without a Sharepoint Server is useless then should I in future installs remove some portion of the install when I install office 2010?
I know this is a bit of a generic question but I really don't know what sure point does this by watching videos, it seems like it does a lot of the things that's other programs already do like address books ensuring of calendars. That's really what exchange
does.
Thanks.Alex has hit all the right notes in his response and the one that I'd agree with would be the planning. It's not uncommon to hear stories of firms putting SharePoint in, before they get around to thinking what to do with it. It is a collaborative
product that can provide answers to defined problems.
On the SharePoint workspace issue, my personal thought would be give it a miss. It doesn't have a 2013 version and it'll be pointless giving this to your user base, only to have to remove it depending on what your settled SP plans might be.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
How can I set up my Mac for two users to share photos, music etc
How can I set up my Mac for two users to share photos, music etc?
On the Mac with the libraries you want to share:
iTunes Preferences click on the Sharing tab and put a tick in 'Share by library on local network'.
iPhoto Preferences click on Sharing and put a tick against 'Share my photos'.
When launching the same apps on other Macs on the network the libraries should be available, listed on the left. -
Can I import a Share Point calendar into the calendar on my iPhone?
Can I import a Share Point calendar into the calendar on my iPhone?
I just tried exporting the existing cloud calendar - which confusingly we've called "Family" and it's been in place for the last 4 years! - and then re-importing it and seeing if it will let me import to an existing calendar rather than make a new one. It worked for a few seconds (I told it to import in to the new "Family" calendar set up through Family Sharing). They all showed up alright - effectively duplicating all family events - but then I had thousands of error messages telling me the event already existed on the server and the only thing I could do was 'Revert to Server' - which deleted them all again. (It let me choose "Ignore" to start with but when the thousands of events clocked over to the first one again I knew I was on a hiding to nothing!).
Going to try doing it about-face and deleting all trace of the original "Family" calendar first this time, (OK to do now that it's been exported)... stand by . . .
~/b -
How to set a change pointer for a perticular table?
Hi,
Please let me know how to set a change pointer for a perticular table.what do you mean by 'change pointer'? normally this idiom is used for sending ÍDOCs from one system/client/org-unit to another ...
do you generally want to record changes to a specific table? then set parameter rec/client using RZ10 for your instance profiles and restart the instances in order for the parameter to take effect.
set the table to 'record all changes' using SE11.
you might re-consider if the table has a lot of data and is accessed very often for performance-resons.
change protocols can be evaluated using tx, SCU3. -
Can i set a default transition for final cut pro x
Can I set a default transition for Final Cut Pro X? I'm doing a multicamera edit and would like all edit points to have a cross dissolve transisiton. Can I make this happen by default?
Thanks!Cross dissolve is the default transition. It's applied with Cmd-T.
-
Can you set up multiple profiles for I pad
Can you set up multiple profiles for I pad
Not sure what you want to do.
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
Cheers, Tom -
How can i set the alternating colors for a table rows
Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM -
How can I set up anApple ID for my 9 years old. Every time I try it tells me he is bolew the min age. If this is the case how can he download free games and how can he redeem his birthday $30 iTunes card? I dont want him to use my ID as it has my credit card details.
I'm very fustrated with this as it seems the Apple kit is for 13 years and older only.
Cheers
BradThat's great your 9-yr-old is responsible enough to handle an iTouch!
There's no way around the age limit. I suggest a family account that you, an adult, control. -
Can we set a default value for the container variable in BPM?
Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1 -
Can I set the default locale for jvm
Hi,
Can I set the default locale for jvm?
How to do it?
PanMy windows default locale is chinese .I have thought of your opinion. But in
windows nt , if I change the locale , all the environment will be
destroyed(just like reinstall it , it's difficult for me) . So , Is there
any other approach?
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Did you try to change the locale in the Windows control panel?
(Control panel -> Regional Options -> Your locale)
Pan YangBin <[email protected]> wrote:
I have tried changing this system property and other properties such
as -Duser.language=en -Dfile.encoding=Cp1252 , but all these properties
did
not changed, you can get this infomation from the log file .Maybe these
system properties are readonly.
Thanks very much.
Pan
Chris Halstead <[email protected]> wrote in message
news:[email protected]...
Try adding -Duser.region=US to the java command line used to start
WebLogic...
-chris
"Pan YangBin" <[email protected]> wrote in message
news:[email protected]...
Hi,
The problem exists in my project still exist.That is it.
When I did not set weblogic.jsp.encoding to GB2312 in my web
application(web.xml), and when the jsp file contain's chinese , the
output
will be error(error chinese) .And when I did not set it , the output
is
correct, but when I use request.getParameter("SomeFormElement")(theelement
inputed chinese), the return value is error(still chinese error).And
when
I
am in windows nt english version and do not set this property, all
these
two
problems dispear. And I try to compare the java files those were
generated
by weblogic from the jsp file , there is only two additional clause
in
the
java file. That's it:
((weblogic.servlet.jsp.JspWriterImpl)out).setEncoding("GB2312");
response.setHeader("Content-Type", "text/html; charset=GB2312");
(the web.xml has <context-param>
<param-name>weblogic.jsp.encoding</param-name>
<param-value>GB2312</param-value>
</context-param> to be set
So, I think maybe it works well if I change the default locale toenglish.
And unfortunately, your method is also failed.(I have to use weblogic
in
chinese environment)
Would you please help me to solve this problem?
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Try java ... -Duser.language=en ...
or mode con cp select=437 in the command prompt before running
weblogic.
Pan YangBin <[email protected]> wrote:
I'm using weblogic server 5.1 sp6 in chinese environment, and I
want
weblogic compile my jsp with en_us locale . So I can't use
Locale.setDefault(new Locale(...)) to set the default locale ,butI
really
want someway configure.
Pan
Dimitri Rakitine <[email protected]> wrote in message
news:[email protected]...
Locale.setDefault(new Locale(...)) ?
Pan YangBin <[email protected]> wrote:
Hi,
Can I set the default locale for jvm?
How to do it?
PanDimitri
Dimitri
Dimitri -
How can I set the desktop image for client computers?
How can I set the desktop image for client computers using ARD or terminal?
How can I set the desktop image for client computers using ARD or terminal?
-
How can I set up auto respond for email
How can I set up auto respond for email?
Hey there jimmac169,
It sounds like you want to have the Mail app automatically reply to emails that come in. You can do this in the app itself, but in order for the function to work, Mail needs to be open. Take a look at this info from the following article:
Mail (Yosemite): Reply to, forward, or redirect messages
Automatically reply to or forward messages
Mail must be open before it can automatically forward or reply to messages. If you want to send automatic replies when Mail isn’t open—like when you’re on vacation—check with the provider of your email account.
Choose Mail > Preferences, then click Rules.
Click Add Rule, then type a name for the rule.
Indicate whether any or all of the conditions must be true for the rule to be applied.
Set the conditions that determine which messages to automatically reply to or forward.
Choose options from the “Perform the following actions” pop-up menu.
Forward messages: Choose Forward Message from the first pop-up menu, then enter the email addresses where you want to receive the forwarded messages. Click Message, then enter any text you want to include with the forwarded message. For example, you could explain that you’re automatically forwarding messages.
Reply to messages: Choose “Reply to Message” from the first pop-up menu, click “Reply message text,” then enter your reply. Mail includes the full text of the original message in your reply.
Click OK.
Carefully consider the rules you create. If they’re too broad, messages can be sent inadvertently or create loops (replies to replies you sent). If possible, test the rules.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Can I set individual alerts (tones) for each calendar events/ reminders
Can I set individual alerts (tones) for each calendar events/ reminders
Thanks On my phone, these are the options under Menu>Settings & Tools>Sound Settings>Alert Sounds: 1. TXT Message 2. Multimedia Message 3. Voicemail 4. Emergency Tone 5. Missed Call . And under Service Alerts: 1. ERI 2. Minute Beep 3. Call Connect 4. Charge Complete 5. Software Update. So nothing there for the calendar. And options from the calendar that I can see are Add (here you can change the tone for one event or recurring event, but not set a default tone for the event alarm), View (gives you the options of viewing an existing event in more detail, adding a new one, and the same choices from the Options list on the first screen where you are viewing the entire month), and Options (1. lets you view weekly/monthly, 2. Go To Today 3. Go To Date 4. Search 5. Erase All 6. Erase All Old 7. Send. So as far as I can see, there's no way to do it. I have been through all the Settings and Tools menus... and the Events menu. But...I have just discovered that if I delete ALL my alarms and change the Ringtone for the first alarm I set, that ringtone becomes the default ringtone. I will try deleting ALL my events and starting fresh with a new tone and see if that works!
-
I can not set up a firewall for my computer. I can get to the place I'm supposed to get to but am unable to click start.
If the Start Firewall button is grey (inactive) check to see if the pad lock is "locked" in the lower left corner of the screen. If so, click it and enter the Administrator password to unlock it. Then you can start the firewall.
Hope this helps.
Maybe you are looking for
-
Server: JBoss EAP 6.2.0 Client: JDK 1.7.0_51 x64 JAX-WS: RI 2.2.8 ( via -Djava.endorsed.dirs ) I am getting a java.lang.NullPointerException when calling the operation on the WS endpoint from the client when using non-anonymous replyTo address. I hav
-
Hi OTN, is there any good alternative for TKPROF? Best Jürgen
-
Customer confirmation of receipt of delivery
What is the best place in SAP to store that date that a customer has received their delivery of goods. I cannot find a date field in the SAP delivery document and I need it to include in a DIFOT report.
-
I am running Firefox 10 on my MacBook Pro. I have tried several times to download the Firebug addon, but get the following message: "The addon could not be downloaded because of a connection error on Mozilla.addons.org"
-
Where's the Create button in Adobe Reader?
I'm trying to scan a document with a scanner but to do so I need to find the Create button that allows me to use the scanner. The Create button is nowhere to be found; it's not in the File dropdown menu and the top left of the screen has an Open but