Can't setup a Lobby Ambassador account??

I've just installed a new WLC4402 (50AP) and am trying to set up guest WLAN access.
So far I have a seperate VLAN and WLAN configured and have secured the VLAN to allow only access to the internet after web-auth.
I go to the 'Management> Local Management Users> New Page'
But the only types of account available are 'Read/Write' and 'Read Only', Should the 'lobby Ambassador' be listed here, or am I missing something?
All the best to all the Forum users for the season.
Dan

Hi Dan,
It should be there if you are running 4.0+ software. If you are running 4.0+ then you could try adding the user via CLI to see if it's an option:
config mgmtuser lobby-admin
If you are running 3.2 or earlier, then that's the problem.
-Ben

Similar Messages

  • Lobby Ambassador account

    I am running WCS 6.0.132. I have a Guest User account where I as the Administrator change the password. I setup a Lobby Ambassador account so I can have our helpdesk change  the password. However When I login as the Lobby Ambassador I can not see the guest user account.
    What am I missing in the configuration?

    There was a version of WCS where they changed how the accounts were visible.  I do believe there was a bug in it.  I'm just going off of memory of us having a similiar issue and that version is a few rev's old.  I would recommend upgrading to the newest version and see if it resolves the problem.

  • WCS Lobby Ambassador Accounts

    Unable to manage Guest accounts created by different WCS Lobby Ambassador user Accounts.
    I have setup three Lobby Ambassador accounts in WCS. Three staff members have been given seperate usernames and passwords to WCS with Lobby Ambassador profiles to allow them to create and manage the Guest Wireless Accounts.
    It was expected that they would be able to view and manange all Guest accounts, but they can only manage accounts they created. If I login as WCS admin I can then see all accounts created by each user.
    We require that all three can view and manage each others accounts using their own WCS login. Is this possible as docs do not mention??

    Hi Stuart,
    Just to add a note to the great tips from Leo;
    CSCsw42942 Bug Details
    SuperUser cannot see guest users created by admin users
    Symptom:
    If a WCS admin user creates a guest user through controller template, a Superuser will not be able to see the guest user created.
    Conditions:
    wcs 5.2.110
    Workaround:
    the root user can see everything
    Further Problem Description: Status
    Fixed
    Severity
    3 - moderate
    Last Modified
    In Last 3 Days
    Product
    Cisco Wireless Control System
    Technology
    1st Found-In
    5.2(110.0)
    Fixed-In
    5.2(122.0)
    6.0(23.0)
    Have a look at this good recent thread;
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Security%20and%20Network%20Management&topicID=.ee6e8c0&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc2cc01
    And this good thread;
    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Security%20and%20Network%20Management&topicID=.ee6e8c0&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc3077f
    Hope this helps!
    Rob

  • How many iPads can you setup on one iTunes account for a school?

    How many iPads can you setup on one iTunes account for a school?
    What is the best system?  We have 30 iPads.

    That would be fine.

  • I can't setup my Bellsouth email account with my iphone.  Anome know why?

    I can't setup my Bellsouth email account with my iphone. Anome know why?

    Why not? What happens when you try?

  • Lobby Ambassador Account creation in NCS/Prime

    When creating a lobby ambassodor account in Prime.
    I see a Profile of Default but don't see the WLAN Ids of the WLCs-
    Shouldn't the Wlans or SSIDs appear in the list of Profiles so said Lobby Ambassodor can create accounts for a particular SSID as does in the Controller creation of guest accounts?

    Rob,
    Take a look here... I created multiple Guest SSID's
    Thanks,
    Scott
    *****Help out other by using the rating system and marking answered questions as "Answered"*****

  • Can I setup multiple user login accounts?

    1. Like a normal macbook computer, can I setup multiple user account with password?
    2. If it's single user only, can I setup password on an ipad? thanks

    You cannot setup multiple user accounts like on a computer. You can set up a passcode to lock the device. Settings>General>Passcode Lock.
    iOS: Understanding passcodes

  • Wireless Lobby Ambassador account errantly displays NCS home page

    Hi all,
    I'm running a supported NCS 1.0 virtual appliance installation which functions fine for most folks, but Lobby Ambassadors with Windows 7 and IE8 or IE9 end up seeing an odd version of the NCS home page with all the graphs, etc, rather than the normal very restrictive list of guest users.  Viewed with the same credentials with XP and IE7 or IE8, it's fine!  Does not matter whether or not Chrome Frame gets installed.  It's not as though the credentials are truly elevated, since the entire command bar is devoid of commands....it just doesn't show the list of guest users.
    Anyone else?
    Gary

    Noticed there is released a patch for 1.1.1 on the 14th of June, but havent been able to find any release notes for the patch.
    Tried to install it my self, it fails every time with "% Manifest file not found in the bundle"
    Getting the same error no matter if I use the main command /patch install or /application update
    application update ncs1_1_update_file.ubf FTPRepository
    patch install ncs1_1_update_file.ubf FTPRepository
    * Edit : the patch in question is only for the WAN release, which doesnt include wireless management, so I guess we are waiting for a seperate patch for the general packadge

  • Can not setup my icloud mail account on my new mbp

    i just bought my new mbp 13" and signed in into my icloud account but when trying to setup my icloud mail i get a failure logging into the icloud server but all other mails and internet setting are ok. what to do? also when i open the pref of mail and look at the icloud account i see that the incoming server field is empty and i can not fill it ( it does not let me).
    ideas?
    thanks

    Not sure what you mean by "within iCloud mail" but if you can't view your iCloud mail inside the Mail app on your phone, go to Settings>iCloud, turn Mail off, then after a few seconds turn Mail back on again.

  • Profile for Lobby Ambassador Account

    How do you configure the Lobby Ambass. Profiles. This is so I can set the defaults for users that the Lobby Ambass configures.

    This is under the WLC not WCS. For WCS, look at this doc:
    http://www.cisco.com/en/US/docs/wireless/wcs/5.1/configuration/guide/wcsmanag.html#wp1077061

  • WCS setup RADIUS users Lobby Ambassador Defaults

    Hi
    I'm using RADIUS so my users can use their active directory credentials to login WCS and generate guest users accounts...
    But I would like to setup some Lobby Ambassador Defaults, I can easily do ths for local users on the WCS system, but how to setup defaults for RADIUS users?
    Best Regards,
    Steffen.

    Hi Scott
    Tanks for your reply.
    I've allready read the article, but I can't see that it says anything about setting up Defaults for the users, only which task the should be able to do...
    I would like to setup defaults for the radius users, so when they are authenticated as lobby abassadors the do not need to select which SSID the a generating a guest user account for and so on...
    This is possible for local WCS users, but i need to setup these defaults for my RADIUS authenticated users.
    Best Reards
    Steffen
    And btw.. this dicussion was started by me.. https://supportforums.cisco.com/thread/2115616

  • Lobby Ambassador - WCS Logging of Guest Account Creation

    Hello all,
    If I am user "admin-ken" and I setup an guest user account "guestuser1" via the WCS controller templates > Guest User (which takes me into lobby ambassador), is there a log file that indicates that "admin-ken" had setup "guestuser1" guest account?
    Many thx indeed,
    Kind regards,
    Ken

    HiKen,
    Hope all is well :)
    Maybe this is what you are looking for;
    Logging the Lobby Ambassador Activities
    The following activities are logged for each lobby ambassador account:
    •Lobby ambassador login: WCS logs the authentication operation results for all users.
    •Guest user creation: When a lobby ambassador creates a guest user account, WCS logs the guest user name.
    •Guest user deletion: When a lobby ambassador deletes the guest user account, WCS logs the deleted guest user name.
    •Account updates: WCS logs the details of any updates made to the guest user account. For example, increasing the life time.
    Follow these steps to view the lobby ambassador activities.
    Note You must have superuser status to open this window.
    Step 1 Log into the Navigator or WCS user interface as an administrator.
    Step 2 Click Administration > AAA, then click Groups in the left sidebar menu to display the All Groups window.
    Step 3 On the All Groups windows, click the Audit Trail icon for the lobby ambassador account you want to view. The Audit Trail window for the lobby ambassador displays.
    This window enables you to view a list of lobby ambassador activities over time.
    •User: User login name
    •Operation: Type of operation audited
    •Time: Time operation was audited
    •Status: Success or failure
    Step 4 To clear the audit trail, choose Clear Audit Trail from the Select a command drop-down menu and click GO.
    http://www.cisco.com/en/US/docs/wireless/wcs/4.2/configuration/guide/wcsmanag.html#wp1076868
    http://www.cisco.com/en/US/docs/wireless/technology/guest_access/technical/reference/4.1/GAccess_41.html#wp1001609
    Hope this helps!
    Rob

  • Lobby Ambassador Profiles in ACS 5.3

    We've set our WCS up to do AAA through our ACS 5.3 which works great. So in order to log into the WCS for Administration or as a Lobby Ambassador (to create guest users etc) the AAA is all done by the ACS, GREAT!
    I have assigned a set of users the Lobby Ambassador role as passed that back through TACACS to the WCS, so those users have their role setup as Lobby Ambassador and are limited from doing anything else, as expected.
    What I want to know is: With normal local AAA on the WCS, when you created a Lobby Ambassador account, you could give the account a set of defaults for any guests accounts created by that Lobby Ambassador account, which was good, so Lobby Ambassadors couldn't set up unlimited time accounts and stuff like that.
    What I want to know now is that since I'm now doing all the AAA on the ACS, is there an attribute I can pass to the WCS in the Shell Profile, along with the roles etc telling the WCS what the guest user creation defaults for the Lobby Ambassador account is, so that we can continue to limit the defaults of any guest account that the Lobby Ambassador accounts create, as it used to be? We'd really like different lobby ambassadors to be able to do different things as well. i.e., Lobby Ambassador X can only create accounts for one region. Lobby Ambassador Y can create Unlimited time accounts where the others can not. We used to do this by assigning different guest user creation defaults to different lobby ambassador accounts on the WCS.
    Help appreciated        

    Hi,
    at the moment the only solution for your requirement is to create local NCS/WCS accounts with exactly the same username as existing in your ACS, no matter what password. Authentication will happen via TACACS+ while the defaults will be taken from the local user account. Please be aware that this mechanism is case sensitive.
    Regards
    Stefan

  • Customize Lobby Ambassador View

    Hi all,
    I have a problem with the following situation:
    - Cisco Prime Infrastructure 2.0 (2.0.0.0.294)
    - Cisco ACS 5.4 (5.4.0.46.0a)
    - 2x Cisco WLAN Controller 5508 in SSO mode
    - x APs 2600 Series
    All devices are configured properly, I can see the WLC on Prime, etc.
    Prime and WLC are added to ACS for TACACS+ Authentication.
    Admin users are able to login to Prime with full feature set (root permission).
    Lobby Ambassadors can also login to Prime for Guest User creation.
    Therefore I have created two Shell Profiles on ACS.
    Now I want to create WLAN Guest User with Lobby Ambassador Account (TACACS-authenticated!).
    I want to customize the Default Guest User Creation page with a company logo and some default settings (WLAN Profile, Apply to Controller List, set "generate password" to fixed, etc.) to fixed values.
    Only thing what Lobby Ambassador can change should be setting the password period (with hours or using calender), guest user name and description.
    If I configure a local user on Prime, I can customize the page.
    However if I use TACACS user, I am not able to use the customized page.
    Can anybody help me with this issue?
    THANKS a lot!!!!
    edit: problem solved by workaround...
    https://supportforums.cisco.com/thread/2201703
    BR, Stefan

    You will not be able to unless you build a back-end that does it and sends the commands to the WLC. Other than that, you can't customize the lobby ambassador page.
    Sent from Cisco Technical Support iPhone App

  • Lobby Ambassador can't email guest user accounts via WCS

    WCS is configured with SMTP server under Administration-Settings-Mail Server Configuration and test is successful and it sends e-mail alerts out no problem. However, when Lobby Ambassador creates a new guest account and clicks on the e-mail link to email it out, this message pops-up: 'Email Server is not configured.Contact Network Administrator'.
    Any ideas?

    by poking around I've found an answer. Even though we have a single email server, right after I've added the same server as a secondary email server, notifications started working. Seems to be a WCS bug.

Maybe you are looking for

  • Serious Ipod Problem - 8 Days Warranty Left!

    Ipod is sad face, Won't go to disk mode, Won't Charge, Won't restart, Laptop DOES NOT recognize Ipod plugged in. I want to just restart ipod to factory settings. SOMEONE PLEASE HELP.. THANK YOU.

  • Auto open docx and xlsx files in MS Office 2011 after it download in Safari (com.apple.DownloadAssessment.plist not work)

    Check "Open safe files" in Safari and define docx and xlsx extensions in ~/Library/Preferences/com.apple.DownloadAssessment.plist not work. Old doc and xls files was auto opened successfully... Content of .plist file: <?xml version="1.0" encoding="UT

  • Battery...please help!

    Hey guys, I have a mid 2012 Macbook Pro 13 inch. The advertised battery life for this model is up to 7 hours. However, for my laptop, the battery life is deteriorating. I have gone to the Apple Service Center to ask if I could get my battery replaced

  • App Store Search

    Does anyone know how to use the openURL method to go to a specific search in the App Store? I know how to do it for apps but what if I would like to do it for a developer?

  • Secret 8 and 9 vs. secret 4

    Hi all not a long time ago, Cisco introduced the secret 4 (for enable secret and username), now this secret 4 no longer seems to be an option (within the 3650 switch with the IOS-XE 03.03.01SE. There are the hashes 8 (PBKDF2) and 9 (SCRYPT) instead.