Can't Setup Airport Express "G"

I'm having trouble setting up my older Airport Express "G." I'd appreciate any help anyone can offer so that I can use AirTunes.
Here's what I'm seeing:
I've got the AirPort Utility installed on an XP machine. I plug in the Airport Express to an electrical outlet and the light turns green, then blinks yellow. I then start the Airport Utility on the XP laptop, it scans for Airport wireless devices and finds my Airport Express. The Airport Express shows up on the left side of the Utility as Apple Network XXX589.
I click the "Continue" button and the computer tries to connect to the Apple Netork. Then, without moving to the config page, the Utility starts scanning for other Apple devices and I get the following error: "An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again. Error -4."
I've tried everything I can think of to set the device up. I've reset it. I've tried to associate with the wireless network broadcast by the Airport. I've connected the Airport to my XP machine via ethernet. Nothing seems to help.
Also, I have a second Airport Express and the same thing happens with it.
Any help would be appreciated.
Thanks!

The Windows Firewall and/or anti-virus software on the XP machine is likely blocking the connection attempt between AirPort Utility and the AirPort Express. Before you start to mess with any of these settings, I suggest that you try the following connection method:
I don't have a PC handy, but things should be similar to this on your machine.
Open AirPort Utility
Look for a File menu item at the upper left of the computer screen. Do not look in the window in the center of the screen.
Click the File menu, then click Configure Other
In the Address box, enter 10.0.1.1
In the Password box, enter public
See if that will allow the connection.
If not, you'lll need to look for the list of blocked connections in the Windows Firewall and/or anti-virus application and see if you can remove it from the "exclusions", or "allow" the connection.

Similar Messages

How can i setup airport express

i need to help to setup airport express

what after that how can i confugure it
Bob Timmons wrote:
OK, thanks.
We know that you have an AirPort Express model A1392
We also know that you have Windows 8.1
We do not know if you have installed AirPort Utility 5.6.1 for Windows - Apple Support. If not, you need to do this.
We still do not know what you want the AirPort Express to do. What service will it perform on your network?

Can't see Airport Express unit, nor Airport Express Setup in my Network Settings

I can see my Airport Express in the Airport Express Utility App, lights are all green, but I can't see the unit, nor see the Airport Express Setup section inside my Network Settings. This is the case when trying to find the WiFi signal from 3 MacBookPros, as well as my iPad and iPhone (all running latest OS versions). I've been through the screenshots on line about how easy this is supposed to be to set up, but I cannot see the Express units at all. Oh, and I've downloaded the firmware updates and recycled the unit. No change. Bad Unit?

Do you want the Express to create a wireless network?
How did you configure the Express to connect to the Internet, and how are you connecting to the Internet now?
Here are the instructions: http://manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2 nd_gen_setup_guide.pdf
Let me know the page where you're getting stuck or where things aren't making sense.

Setup airport express, and when it had to restart it no longer can be seen

I bought an airport express for my macbook pro to strengthen my connection at school on the locked wlan network, I set it up and everything seemed to work fine but after it was finished the computer said it had to restart the the airport and then it said it couldn't find the airport after it restarted. The green light of life is on.

What you want to do is not possible - you cannot configure the Airport Express to function as a remote base station (or in other words, a wireless relay) for your school's wireless LAN. I have no idea what mode you managed to configure your Airport Express into - but to bring it back to life I suggest you do a factory default reset per the instructions found here
Setting up an Airport Express as a remote base station requires you to set up what Apple refers to as a "wireless distribution system" (WDS). In order to set up a WDS, the main base station for the network must be another Airport Express or an Airport Extreme Base Station. There is no way your school's wireless LAN will support setup of a WDS with your Airport Express.
Now - if your school provides a cabled ethernet network with a port close by to where you want to work, you do have an option: you can cable the Airport Express to that ethernet port, and configure the Airport Express into "Bridge Mode" so that it functions as a basic wireless network access point.

In my iPhone wifi screen the setup airport express is not visible how I turn it visible in my wifi page

I'm not see in my iPhone 4s in the wifi the setup airport express the only see the wifi connections and ask to join network I don't see the setup screen how I charge this in the wifi options

To administer the AirPort Express, you need to install the iOS version of the AirPort Utility. You can get it via the App Store app on your iPhone.

Can I use Airport Express as a Wifi Extender?

Forgive my ignorance, but I just swithed to all Apple products a few months ago and I have a question about the airport express.
We currently have one airport extreme base station set up in our house. The only problem is that the g signal for my iPhone won't reach quite far enough to get to the third floor (its a very long and tall home).
I was wondering if you can use the Airport express as a wifi extender with no cords plugged into it, similar to the linksys extenders you can buy that extend the signal range.

LukeW, welcome to the discussions!
Yes, an AirPort Express could be used with your Extreme to "extend" the wireless network created by the Extreme. I assume here that you have an "n" capable Extreme.
If you have an older 'g" Extreme, the Express could be used to "participate in a WDS" (wireless distribution system), which is a similar setup.
It will probably take some experimenting to find the best position for the Express (you want it to receive as strong a signal as possible and "extend", so a good starting point would be to place the Express at a point that was roughly half way between the Extreme and the area that needs more wireless signal.

Macbook can't recognize Airport Express!

Hi guys,
I have a Macbook Pro Retina 15" Early 2013 running Mavericks 10.9.1. My router is the Apple Airport Express A1088 and what is happening is: I did the setup of the Airport Express last year and everything was working fine. I had to download the Airport Utility 5.6 and then I configured the Airport Express. Alright. But today, my wifi connection was not showing in my Macbook Pro, but it was working fine in my iPhone 5. I tried to turn the Airport Express off, and the same for my Macbook Airport, but it doesn't work. So I decided to do a hard reset and also a reset to factory settings. What is happening is my Macbook Pro showed only one time after doing the reset and I did all the steps of the setup using the Airport Utility 5.6. But when the airport express restarted, it was working only with my iPhone 5, not with my Macbook. So I tried to reset again to factory settings and now I can't do the setup because the Airport Express doesn't show up in my Macbook as a new base station or anything else. With my iPhone 5 I can see the Airport Express as a new base station, however I am not able to setup it because it is a old version (A1088).
I don't know why my Macbook Pro is not showing up the Airport Express. I have already tried to make it work with Windows (via virtual machine) and using Airport Utility 5.6. I also know that THIS IS NOT A HARDWARE PROBLEM! Any other network I am able to join with my Macbook.
I also looked in this forum about other users that had the same problem, but almost all of them started working after a hard reset or reset to factory settings, which is not working for me.
I just wish my Macbook to recognize the Airport Express, until yesterday everything was working fine. And today it is only working with my iPhone, but I am not able to set up it with the iPhone.
Help!
Thanks!

Hey Luis!
I am sorry - i only searched for Apple Airportutility and Mavericks to post the Link :-)
Did you already tried
- to delete your Wifi from the list of known Wifi's from your MacBook/System Prefs/Network/AirPort/Option/
- or maybe delete and reinstall the AirPort Service from your MacBook/System Prefs/Network
Cheers
Robo

Setup Airport Express 802.11 g

i has airport express 802.11 g... can you explain step by step how to setup this airport express to my macbook pro mid (2010)... I want to extend range of my network using airport express... my network already in wireless.. I just wanted to setup airport express 802.11 g for me to :
1) extend range of my network
2) using stereo
3) used printer wireless
thanks

Hi again,
sorry, it took me a while to reply.
I didn't proceed with my attempt to make this setup run, but now I finally want to give it another try.
This screen shot shows the D-Link's advanced wireless settings. They are pretty much the default settings.
Sorry, that's in German, but I guess you get the idea.
So maybe WPA/WPA2 is too new? Or TKIP/AES or PSK/EAP?
No idea...
Many thanks in advance!

How can I join Airport Express and 2Wire 3600HGV to extend wifi?

I to join an Airport Express to the wifi network from my AT&T 2Wire 3600HGV router to extend the wifi signal. I know it is not SOP to link an AX to a non-Apple device like this. I found instructions ( http://fsdeviations.blogspot.com/2012/09/howto-2wire-3600hgv-airport-extreme.htm l ) for joining an Airport Extreme to the 3600HGV. Has anyone used this or a similar approach with the Express to join and extend wifi from the 3600HGV?

Connect an Ethernet cable from on of the LAN <--> ports on the back of the 2-Wire modem/router to the WAN "O" port on the AirPort Express.
Power up the AirPort Express for a few minutes. The indicator light on the front of the device will be slowly blinking amber at this time.
On your Mac......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Other WiFi Devices tab
Click on AirPort Express
The setup utility will open up and take a minute to analyze the network, then suggest that the AirPort Express will create a new network....which is the correct setting. The window will look similar to this illustration:
For Network Name......type in the exact name of the wireless network that the 2-Wire is providing......IF.....you want to "extend" the 2-Wire network and make one "big" network. If you want to have the AirPort Express provide a different network, type in the name of the network that you want the AiPort Express to provide.
For Base Station Name....type in a device name that you want to call the AirPort Express
Password......If you want to extend the 2-Wire network, then type in the exact same password that the 2-Wire network is using. If you want the AirPort Express to provide a different network, type in a password that you want to use with the network that the AirPort Express will provide
Verify......verify the Password
Click Next, and the utility will set up everything for you automatically.
When you see the message of Setup Complete, click Done. That's it. There should be a green light on the front of the AirPort Express at this point. You can configure other AirPort Express devices in the same manner.

Can't install AirPort Express Assistant because I already have Utilities

Just having some annoying trouble here.
I have a MacBook Pro that came installed with AirPort Utilities, and it has the latest version.
I bought an AirPort Express so I could stream music to my speakers with AirTunes. I'm not hooking an ethernet cable to the airport, because my wireless already works fine in my house.
I need to install AirPort Express Assistant in order to set up the network between the express and my computer, but I can't even use the CD it came with because once I get to the part to select where I want to save it, it says "this computer already has a more recent version of AirPort on it etc..." However, I only have Utilities, not the assistant.
With the Express plugged in, I go to Utilities and it doesn't pick anything up, which makes sense. So basically, what can I do?
I tried deleting Utilities off my computer so I could just install the whole CD but even that did nothing.
Thanks.

Your version of Snow Leopard already had the latest version of AirPort Utility 5.5.1, which is the version that you should use to configure the AirPort Express.
The disk which came with the AirPort Express was produced some time ago and the version of AirPort Utility on the disk is out of date.
Not sure what you mean by Assistant. There is a guided setup process in AirPort Utility that is initiated when you click the Continue button. That may be what you are thinking of.
You made a mistake by deleting AirPort Utility 5.5.1 from your computer. You should download AirPort Utility 5.5.1 and install it so that you can configure your AirPort Express.
http://support.apple.com/kb/DL955

Is there a way I can connect my airport express to be able to airplay the sound from my apple tv?

Is there a way I can connect my airport express to ba able to air play to my speakers the audio from apple tv?

GEESAR wrote:
hi there
is there anyway i can use the unlimited data i have from my mobile network provider (o2) on this i pod touch 4 generation the latest model NO.
and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider NO
if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
geeeeesar also how does this ipod touch4 pick up the wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of. These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants. Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for.
thanks can i pod touch 4 generation download movies too please help thank u very much.... Yes. If your iPod has a WiFi connection and you have an account with a service like NetFlix....

How can i install airport express A 1264 on os x 10.9.2

How can i install Airport Express A 1264 on os x 10.9.2

Hello chawich
All you should need is Airport Utility that is located in the Utilities folder that sits in the Application folder. If you have an iOS device, you can also set it up with that device with Airport Utility or in Wi-Fi section in Settings.
AirPort Utility software and firmware downloads
https://support.apple.com/kb/HT1998
Regards,
-Norm G.

Airport Utility can't find Airport Express after setting up as repeater station

I wanted to extend my 2Wire-based wireless network into a specific room that never seems to be able to pick up the signal, and found the following instructions on how to do so on Apple's website:
(note: these instructions were submitted by another user in response to a question as to whether or not an Airport Express could be used as a repeater station for non-Airport Extreme-based wireless networks - linked here http://store.apple.com/us/question/answers/product/MB321LL/A?pqid=QY4CAJJC7KFTTD KYH72DKPXF4CAUA9D4J).
Yes, you can do this two ways: If you can connect your airport express to your router via ethernet, then you will perform the following steps in the airport utility:
1. Select your airport express.
2. Select manual set up.
3. Under Wireless, select Participate in a WDS network
4. Enter your network name, radio mode, channel, and security
5. Under WDS, select WDS main
6. Check wireless clients
7. Add the MAC address of the router
8. Click update
That's it
Now, if you connect your airport express to your router wirelessly, all the steps are the same except for step 5. In this step, select WDS remote instead. Everything else is the same.
I followed those instructions exactly with my Airport Express and, after restarting, the amber light is flashing on and off continuously and the Airport Utility can't find the Airport Extreme base station. What the heck went wrong here?

Update:
I restarted the laptop I used to set up the AX as well as pushing the "reset" button on the AX (first time - pressed it for 1 second, Second Time - pressed and held for 15 seconds then let go). The Utility still isn't recognizing the base station.
I also upgraded the Utility's software to 5.5.3 right before I went through these steps, and now it's not recognizing the base station. ARGH.
Update #2: I plugged the AX into my laptop with an ethernet cable and the utility STILL can't detect it. This is ridiculous.
Update #3: Not 30 seconds after update #2, it FOUND the **** AX >.< I'm updating the firmware, but I still can't get it to work as a repeater station if I have to plug it into my laptop all the time JUST to get the Utility to recognize that yes, Virginia, there IS an Airport Extreme.
Message was edited by: bleedingrose19

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

Can u run Airport Express and a wireless modem together?

Can u run Airport Express and a wireless modem together at the same time?
I'm using AE purely for music distribution and have just bought a wireless modem for the internet (not a AE). However I can now only select either the AE network, OR the wireless internet network (it's BT HomeHub). Hence I can either play music or use the internet, but not together!
Any ideas anyone..??
Thanx
David

You should configure your AirPort Express (AX) to join the wireless network provided by the modem. The instructions are in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Can't Setup Airport Express "G"

Similar Messages

Maybe you are looking for