Can't setup driver TouchPad Driver (Synaptics, Cypress) windows 8 on lenovo U400

can't setup driver TouchPad Driver (Synaptics, Cypress)  windows 8 on lenovo U400
The windows show message :
Can't you help me !

It doesn't work, i found a Dell XPS 13 driver and it works perfectly with my U400. Even multitouch and the new W8 gestures work.
http://downloads.dell.com/FOLDER00813129M/1/Input_Cypress_W7_A03_Setup-03PDC_ZPE.exe

Similar Messages

  • Satellite L955-10K - Synaptics Touchpad Driver does not work properly

    Hello, ASRR here.
    I've been having a problem with my Synaptics touchpad driver since yesterday. I am very used to using the "gestures" to work with my touchpad and the gestures haven't worked properly (in fact at all) for a while. The two-finger scrolling, the three-finger touch and others (actually all of the gestures) do not work anymore.
    The cursor moves, and works fine but the gestures don't.
    When I go to the Mouse option in the Control Panel, a window pops up stating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me whether I want to uninstall it.
    I have tried uninstalling it, then going on the support page for Toshiba and downloading a driver that was suitable for my model, operating system, etc.
    When I set up the driver I downloaded and restart the PC, the same window pops up when I try and go to the Mouse options in the Control Panel and the gestures do not work.
    One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
    I have tried multiple times to fix it but I can't. I went to the UEFI firmware set up and tried resetting it to default but with no success.
    I really do not know what to do. Could somebody PLEASE help?
    My Toshiba Model is a Satellite L-955-10K with a 64bit processor and originally installed Windows 8 operating system.
    Any help would be greatly appreciated. Thanks

    >One interesting thing I noticed however, is the fact that when I roll back the driver (in the Hardware properties- then settings) the gestures work FINE. However, as it always asks you to restart the computer in order for the Rolling back of the driver to take place, when I do restart it, it sets the Microsoft touchpad driver from 2006; which does not include the gestures I need.
    To me it looks like the Synaptics touchpad driver could not be installed properly and after the new restart the touchpad driver isnt indicated by the Windows 8 system.
    By the way: are you still using the Win 8? Didnt you upgrade the system to Win 8.1? Should do this since many different bugs have been solved in new Win 8.1 version.
    Back to the Synaptics touchpad driver.
    Usually the drivers should be downloaded from the Toshiba driver page but in some cases you could also use the drivers directly from manufacturer pages. In this case the touchpad driver has been released by Synaptics and it would be interesting to know how the touchpad driver from Synaptics driver page would act on your notebook
    http://www.synaptics.com/en/drivers.php

  • Can't install driver touchpad on win7 64bit

    Hello , I have a problem when installing the touchpad driver on win7 . I can not install multitouch mouse , but success on win8 .
    I have tried many of win7 but similar results . Please help me . thanks!
    thank

    Hi @HungVo ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Probook 450 g and issues with the mouse drivers.  The Synaptics Driver in Windows 7 comes with mouse drivers. Unless you are using a USB mouse which would use the Plug n Play drivers. Here is a download that might help.
    Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • T400s synaptics touchpad driver for windows 7 64 bit

    I can't find a driver for:
    t400s synaptics touchpad driver for windows 7 64 bit
    I looked on the Lenovo site under t400s
    Any Help on this?  I really like the touchpad but I want to turn off tapping and make some other adjustments.
    Thanks,
    Bill

    I'm sure bananaman meant on the Win7 Beta OS download site.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Faulty Synaptics Touchpad Driver on Split x2 13-m121sa Causing Freezing and Mouse Unresponsiveness

    Edit: I found a solution, scroll further down. I have been having problems with my new Split x2 similar to those already explained in the forums by other users. The symptoms are as follows:
    1. Unusual hanging or freezing of the mouse pointer on the screen and temperamental use of gestures (two finger scrolling, zooming, etc.)
    2. Slowing down of computer generally; acting sluggish and freezing during only light use and/or after screen being closed.
    The symptoms seems to change depending on the length of time the computer has been switched on, and are affected by disconnecting/reconnecting the screen from the dock.
    Being quite good with these things I decided to investigate and have uncovered the following:
    The root cause of both of these problems is the Synaptics Touchpad driver. While the newest version (17.0.10.9) available from the HP website seems to solve any unusual freezing of the pointer it has a significant memory leak. In other words, as you move the pointer around the touchpad uses up the computer's memory. This is normal, but the problem is that the driver for the touchpad does not give the memory back; it cannot be reallocated. This means after a couple of hours of using the computer (or having the screen closed) the memory reaches saturation point and the computer grinds to a halt. If you are having the same problem have a look for yourself: Open task manager and look at the performance tab. Under the Memory heading you will see a value for 'Non-paged pool'. With the computer idle this number shouldn't increase, but move the mouse around and you will see it gradually go up without returning. I have confirmed this to be the Synaptics driver by using the Windows tool poolmon.exe - the culprits are Irp and SynT. Regarding solutions, I have tried many - but there is no absolute fix.
    You can uninstall the Synaptics Touchpad driver and the problem will go away - no more freezing or high memory usage. But without the driver the computer reverts to using the standard Windows driver - therefore there is no multitouch gestures like scrolling or zooming.
    I have tried installing the generic Synaptics driver available from their website, and the computer won't allow it. Regardless of this, I forced the driver install but the generic driver does not work with this Touchpad anyway (Error code 10). I have tried the latest version (17.0.19) and an older one (16.2.21) with no success. Even earlier versions (e.g. 15.x.x) refuse to run on the grounds of incompatibility. HP Support suggest a system 'refresh' back to factory setting, but apart from the huge inconvenience of time and losing files - I know this won't work either. Apparently a clean install has worked for one user - but for this you need a Windows install disc or USB which I do not have - and I'm sceptical that it would work anyway.
    So now I'm using the standard Windows touchpad driver without being able to scroll, zoom or use the swipe-in gestures of Windows 8.1.
    If a HP representative is reading this, I would strongly suggest that this problem be escalated. A simple update from Synaptics could solve this problem which is causing people's computers to freeze up and wasting your support staff's time.
    TL;DR: HP's Touchpad driver is faulty and causes a memory leak. Synaptics own generic drivers do not work. And Windows standard drivers are unsatisfactory.

    SOLVED!
    Through my own research I have found a solution. While the official newest driver listed under this model is 17.0.10.9 there is in fact a newer version which does not have this problem: version 17.0.10.16!
    I am still disappointed that HP didn't suggest this solution themselves, considering this driver was published back in November 2013! HP if you're reading this: please allocate this driver to this model in your support pages. Anyway, the solution is as follows:
    1. Open the Device Manager (Control Panel -> Hardware and Sound -> Device Manager)2. Under 'Mice and other pointing devices' open 'Synaptics HID TouchPad'3. In the 'Driver' tab click on 'Uninstall'4. The pointer will disappear - reboot the computer5. Download the new driver from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=uk&lc=en&softwareitem=ob-127354-1(if this link goes down try searching online for 'synaptics driver 17.0.10.16')6. Open and install the driver I hope this helps. HP, please send my consulation fee via PayPal(!)

  • Screen Flickering Everytime After Updating Synaptics Touchpad Driver And Touchpad Not Working

    I have a HP ENVY 4 1023tu Notebook with Windows 8 Pro. I always keep my pc updated. But whenever i try updated the synaptics touchpad driver through availabe updates by hp support assistant, the screen starts to flicker(Start screen and settings bar at the right) and touchpad doesn't work . The external works fine. Then I have to roll back the driver . then it comes to normal. If the driver update is meant to be updated then why its not supporting...

    I had the same problem as you with my Hp Probook 450 and I think I found a cause of the problem. I installed Windows 8.1 on it, and when I tried to install touchpad driver, after system restart my screen was blank. My problem is in AMD Radeon graphics card integrated in laptop. When I installed touchpad driver, the graphics driver somehow updated too. The problem is, that AMD only have beta driver for Windows 8.1, while the old one isn't good. So I had to start computer in safe mode and disabled graphics card in Windows device manager. Then I downloaded that beta driver and installed it (still with some small problems) So, the beta driver also isn't perfect, but it will help until they release final version. So I hope that helps you, or anyone, that might have similar problems.

  • Can`t setup my Ax88772a USB Fast Ethernet Adapter! Driver is already downloaded

    Can`t setup my Ax88772a USB Fast Ethernet Adapter! Driver is already downloaded

    Can`t setup my Ax88772a USB Fast Ethernet Adapter! Driver is already downloaded

  • Elantech synaptics touchpad driver doesn't work properly for G570 on Win8

    Hello, i got G570 laptop, at first i had Win 7 installed in it, i downloaded the touch pad driver for my laptop to use the scrolling feature of touch pad and it worked fine. Now i upgraded my OS to Win 8 and so i download and installed the touchpad driver for Win 8. The problem i am facing is that the scrolling feature no longer work on Win 8. Please suggest me a solution

    I am having the same exact problem on my G580. Everything funtions perfectly in desktop mode, but in any metro app or the start screen scrolling does not work.

  • U300 Touchpad Driver for Windows 8 Does Not Load Properly

    I have spent a few hours with both Microsoft Premier Technical Support and (a very grumpy) Lenovo technician. They have both confirmed that the Windows 8 touchpad driver that is currently posted on the Lenovo site for the U300S does not load properly. It will, as many have reported, disable the touchpad altogether. There seems to be an issue with the loader installing files for both a Synaptics and a Cypress touchpad. This creates an apparent conflict that relegates the touchpad as useless.
    If you choose to install this driver, I would recommend that you create a store point so that it can be easily recovered.
    A standard mouse works just fine (albeit without any Win8 functionality).
    ***Lenovo should pull this damaging driver down from their site until a certified replacement can be prepared.***

    Hi, 
    If the computer is OEM, please refer to the user guid manual to know how to boot into WinRE to recovery your system. 
    Meanwhile please try to enable or disable Secure Boot by referring this article: 
    Secure Boot
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03653226
    Kate Li
    TechNet Community Support

  • Win 7 Touchpad driver is not working on Satellite C855-21V

    Hello everybody!
    I have an Satellite C855-21V and it came with Windows 8. After one week of desaster Im sure I want never again a Windows 8 on my Computer!
    So I installed Windows 7 and can find all the drivers somewhere in the internet.
    The only thing what is not working is the touchpad.
    Win 8 driver dont work and from other models the win 7 driver don't work.
    Does anybody know what Brand is the touchpad or where to find a driver for win 7?
    Thank you all for the help!
    Best Regards
    Frank

    Hi
    First of all the touchpad should work after Win 7 installation.
    The Windows system contain an standard touchpad driver which should control the touchpad.
    Of course the installation of additional Synaptics driver would provide more touchpad features (finger scrolling, etc) but also without the Synaptics driver the touchpad should work.
    Anyway, I already mentioned the Synaptics driver and you can download this here:
    http://www.synaptics.com/resources/drivers
    PS: is the touchpad enabled? F5 Enables and disables the touchpad

  • Touchpad Driver - Windows 8.1 -

    I have a Lenovo Yoga 2 Pro.  I've been messing around with the touchpad driver by installing a newer one directly from synaptics, but I wanted to install the Lenovo driver to get the functionality where the trackpad turns off in tablet mode.
    I downloaded the driver from here:  http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-2-pro-lenovo/do...
    When I try to install it, it asks for administrative rights to install it, but then nothing happens.  I was trying yesterday to install it and it said "Could not find OS specific installer" or something similar, I can't get the message to show up now.  
    The above link says that the driver is for windows 8.1 and that's what I have installed.  Anybody have any clue why it's not working?
    Solved!
    Go to Solution.

    If you are strictly interested in a stable driver that works, use 17.0.8.4 for the Yoga 13.  http://mobilesupport.lenovo.com/us/en/downloads/DS038305
    As far as I can tell it is working perfectly on my Y2P.
    See my post on this thread:
    http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Touhpad-Zooms-instead-of-Scrolls-in-some-...
    Later versions result in zoom instead of scroll when using two finger swipe in some applications like Chrome.
    I usually advocate using the latest drivers, but in this case the latest drivers seem to have issues in some applications.  

  • HP-15 r249tu Notebook touchpad driver for windows 7 64 bit

    Hello, Please help me with the touchpad driver for my HP-15 r249tu Notebook, I had tried to install Synaptics Touchpad driver sp69613, but is doen't works. After installing this driver it shows an error message continously that the driver stopped working and shows the option for close the programme and when I close the programme it again comes up with the same pop up message. Please help me the driver which I can use for my Notebook.

    Try reinstalling the driver from the HP Recovery Manager app uf your laptop then select Driver and Application reinstall and find the driver from there.. By the way, drivers that's in HP Recovery Manager are the default drivers of your laptop so it should work.. Hope this helps

  • Thinkpad R500 Touchpad driver for Windows 10 (Mac like gesture)

     I have a Lenovo Thnkpad R500 with Windows 10 installed, but it seems there is no support the two finger scroll (Mac like gesture). Is there Touchpad driver for the R500 to support Windows 10 two finger scroll (Mac like gesture)? It looks to be a Synaptics UltraNav, I have tried installing the generic Synaptics Windows driver V 17.0.19 that claims to support Windows 8 but it fails to install on Windows 10. If I cannot get the two finger scroll to work on the Lenovo, I will stay with the Mac.

    Try this tool?
    https://code.google.com/p/two-finger-scroll/downloads/detail?name=TwoFingerScroll_1_0_6.zip&can=2&q=

  • I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

    Time capsule has been working perfectly for months.
    Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
    Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
    I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

    What OS are you running??
    It is very typical Yosemite issue.
    1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
    From my screenshot you can see the TC address is 192.168.2.57
    It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
    2. In Finder use Go, Connect to server.
    Type in SMB://192.168.2.57 (replace with IP you discover).
    If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
    This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
    Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

  • How can I use a different driver for audio input and output?

    I did a search of course, and came up with something about an aggregate. I have no idea what this is, how to do it, or if it would even work for me.
    What I am trying to do is:
    1) Record into Logic Express using my Tascam US-122.
    2) Have playback come out of my computer sound system, not the Tascam.
    If I go over to the Audio setup window, I can only record when the driver is set to Tascam US-122. Likewise, I can only listen to sound when my Built-In Audio is selected. It gets rather annoying going between the two.
    So, would this aggregate thing solve my problem? If so, how do I do it? Thanks for any help!
    -allen

    Yes it should do what you want.
    Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
    Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

Maybe you are looking for