Can't sign in to my psn error code ce-33987-0

ive been trying to sign into psn for the past hour and keep getting this error code tried its suggested actions and checked my isp but there telling me its all ok there end and its the psn network can any one help me on this

I've been having the same problem for over a week, but I think I found the solution to it.Firstly, my internet setup is an old netgear modem-router combo hooked up to a new TP-Link (n) router. The netgear is set to modem only mode. My ps4 is connected wirelessly downstairs.For about 3 months, my ps4 was working normally with no problems, but about a week ago this error code started popping up inconsistently. Sometimes everything was fine, most times it wasn't.I isolated the problem to the PS4-Router communication, as my ps3 (and everything else at home) worked perfectly with no changes to the setup. Possible Solution- Today, I factory reset both devices (Netgear and TP-Link routers) and set them up to the point where they worked normally (with my phone, laptop, etc).Then, I enabled UPnP on BOTH devices, and also Forwarded all the necessary ports for my PS4 on the TP-Link router.I changed the wireless channel on the TP-Link to [1] from [6].I also changed the wireless channel width on it from [auto] to [20mhz]. This automatically reduced my max Tx rate to [130mbps] from [300mbps]. (I suggest doing this manually if it doesn't change automatically).I rebooted the TP-Link router, and started up my ps4 after a few seconds. The system loaded perfectly, PSN signed in instantly, and I played an hour on BF4 with no problems. I also restarted my PS4 again to see whether the settings would 'Stick'. They did, it still ran perfectly. I won't play again for a few hours, but I will report here if it does/doesn't work. Good luck trying my solution, Hope it works for you.Happy Gaming

Similar Messages

Can't connect to PSN. Error code: ce-33987-0

Almost every night I can't connect to PSN. Error code: ce-33987-0
After multiple PS4 restarts and my router restarts - it connects. Sometimes it connects after few hours without doing anything at all. So I couldn't find any pattern.
My router and internet is perfect - all other devices at home has perfect internet connection at full speed.
I tried all the tricks I've found in this forum (make my PS4 primary, connect to wifi and connect back to cable, do not turn off PS4 and leave in standby, check NAT type etc.).
But nothing helped.
Connection test shows NAT Type 2 which is perfectly OK I guess.
Is this PSN that unstable or what?
How should I solve this problem?

I've been having the same problem for over a week, but I think I found the solution to it.Firstly, my internet setup is an old netgear modem-router combo hooked up to a new TP-Link (n) router. The netgear is set to modem only mode. My ps4 is connected wirelessly downstairs.For about 3 months, my ps4 was working normally with no problems, but about a week ago this error code started popping up inconsistently. Sometimes everything was fine, most times it wasn't.I isolated the problem to the PS4-Router communication, as my ps3 (and everything else at home) worked perfectly with no changes to the setup. Possible Solution- Today, I factory reset both devices (Netgear and TP-Link routers) and set them up to the point where they worked normally (with my phone, laptop, etc).Then, I enabled UPnP on BOTH devices, and also Forwarded all the necessary ports for my PS4 on the TP-Link router.I changed the wireless channel on the TP-Link to [1] from [6].I also changed the wireless channel width on it from [auto] to [20mhz]. This automatically reduced my max Tx rate to [130mbps] from [300mbps]. (I suggest doing this manually if it doesn't change automatically).I rebooted the TP-Link router, and started up my ps4 after a few seconds. The system loaded perfectly, PSN signed in instantly, and I played an hour on BF4 with no problems. I also restarted my PS4 again to see whether the settings would 'Stick'. They did, it still ran perfectly. I won't play again for a few hours, but I will report here if it does/doesn't work. Good luck trying my solution, Hope it works for you.Happy Gaming

Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other devices.

Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other apple devices I have.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

TS4403 what does "you can not sign in because of server error" mean? I cannot sign in to icloud control panel. how do I fix this?

Why do I keep getting a "you can not sign in because of server error" when I try to turn on my icloud control panel from my Windows 7 PC?
I'm able to log in from my browser, why not from control panel?

Hello, Sameh.tolba.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the two articles below when experiencing this issue.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
iCloud: Making sure that iCloud works with security software in Windows
http://support.apple.com/kb/TS4175
Cheers,
Jason H.

Can't sign into itunes with "unknown error (-50)" prompting

can't sign into itunes with "unknown error (-50)" prompting

Hi vagsmailbox,
I apologize, I'm a bit unclear about the exact nature of your issue. If you are talking about signing into the iTunes Store, you may find the following articles helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes Store: "Error (-50)" when downloading purchased content
http://support.apple.com/kb/ts1583
Regards,
- Brenden

I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

Hello, Sameh.tolba.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the two articles below when experiencing this issue.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
iCloud: Making sure that iCloud works with security software in Windows
http://support.apple.com/kb/TS4175
Cheers,
Jason H.

I cannot log into my icloud account on my windows pc. I keep getting I can't sign in because of server error, has anyone had this problem?

I have not been able to log into icloud from my Windows PC. I keep getting I can't sign in because of server error. I have deleted and re-installed icloud, still nothing. This all happened because I realized my photostream wasn't working. Any help would be great!!!!!

Hi there devbark,
You may find the troubleshooting steps in the article below helpful.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
-Griff W.

TS3988 I keep receiving a message "You can't sign in because of server error"

I keep receiving a message "You can't sign in because of server error" can someone please tell me how do I fix this?

Antonio,
Show ... it worked ... you are the man! This hint of clicking the right mouse button on the prompt and run as Administrator was perfect.
Thank you very much

HT204053 you can't sign in because of server error

I cannot sign into icloud/photostream from my pc. windows 7. Icloud says I can't sign in because of server error and Photostream says its not enabled

To solve this problem you can:
Windows 7
1) Click on Start
2) Type cmd and press enter
you will see a new window
3) type "netsh winsock reset"
4) restart the machine
should work.
If still does not work you must disable the firewall and antivirus
Para solucionar este problema debes hacer lo siguiente:
en Windows 7
1) click en Inicio
2) escribe CMD y pulsa enter
te va a aparecer una nueva ventana
3) escribe "netsh winsock reset"
4) reinicia la maquina
deberia de funcionar.
Si aun no funciona debes de deshabilitar el firewall y el antivirus

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can't complete the operation because some data in the folder can't be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can’t complete the operation because some data in the folder can’t be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics

Help with "The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written. (Error code -36)" Any ideas on how to fix this?

While trying to copy my iPhoto Library (49.61 GB) to an external hard drive, I receive the error message "The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36)"
I need to move my library because I have no more disk space. This was going to be step 1 followed by backing up to another EHD.
More details: iPhoto version 9.6 (910.29) OX X Yosemite Version 10.10.1 (Mid 2011 Mac Book Air). EHD= WD Elements 1 TB (purchased at B&H Photo where the sales associate formatted it for a Mac).
Any step by step ideas for help are appreciated! I've read through a few threads but need more step by step directions.

That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library.

"The Finder can't complete the operation because some data in "For Desta 008 SUR-BPBO-00019.tif" can't be read or written. (Error code -36)

i'm trying to backup MacBook white 10.6.3 manually to my external HD but it gives me this error,"The Finder can’t complete the operation because some data in “For Desta 008 SUR-BPBO-00019.tif” can’t be read or written. (Error code -36). i tried taking the HD out, but it gives me the same error, so pls tell me what to do, i need the backup fast.

Aint you quick to jump to conslusions? So becasue one thing isn't working of the hundreds of things I donwloaded doesnt work, my drivers are broken?
Ok then, let me download some other things to make sure
Minecraft: it worked ✓
Firefox: it worked✓
Synthesia: it worked✓
iExplorer: it worked✓
Pencil: it worked✓
Flash: it worked✓
Synfig was made in 2006, so it's not unlikely that it might not work for some people. By 'some people', I mean me. I was just asking if it was something on my side, but if that's all you got, I think it's highly unlikely that it's my fault. I don't even want it anymore, I got Flash Professional. I was just wondering. I could have sworn you used to write more detailed answers before jumping striaght to conclusions. 'Did this happen to you on anything else?' or maybe even 'Why don't you complain to them?' would have been fine.

The finder can't complete the operation because some data on iPhoto Library can't be read or written. Error code -36

Hi,
Installed a new startup drive and cannot access my photos. While copying/pasting iPhoto library from old to new drive I get,
The finder can't complete the operation because some data on iPhoto Library can't be read or written.
Getting help from Apple senior advisor caused more problems, was unable to boot up for a while. Back up now but still can't transfer iPhoto Library.
Anyone seen this before?
Thank you

Linc and Larry, could you please have a look at this thread? Sorry, it is in German:
Re: Fehlermeldung beim Verschieben von iPhoto
The OP is trying to copy the iPhoto library to an external drive and getting "The finder can't complete the operation because some data on iPhoto Library can't be read or written. Error code -36". This happens even when copying to the same drive. The destination drive is correctly formatted.
The Console is showing a message I don't understand:
03.06.14 18:26:40,990 Finder[1154]: NSFileCoordinator: Sending of a providerCheckin message was interrupted. Details: Connection interrupted
Any idea what this means?

The Finder can't complete the operation because some data in "Adobe Acrobat" can't be read or written. (Error code - 36)

I recently did a clean install on a 2011 MacBook Pro with Mavericks. Went to install Adobe Acrobat 9 with the DVD media and about 3/4 of the way through the install, the install stopped and the following window appeared: The Finder can't complete the operation because some data in "Adobe Acrobat" can't be read or written. (Error code - 36). I've tried to install a few times and get the same message. Is Adobe Acrobat 9 incompatible with Mavericks. I've seen some posts on Apple Support Communities indicating that it is indeed compatible, but no explanation why the error pops up.

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

The Finder can't complete the operation because some data in "Chronicles" can't be read or written. (Error code -36)

The Finder can’t complete the operation because some data can’t be read or written.
(Error code -36)
What does this error code mean?

I faced the same problem and i fixed it by going to applications - utility - disk utility and fixing the errors.

Can't sign in to my psn error code ce-33987-0

Similar Messages

Maybe you are looking for