Can't sincronize music library after joining ItunesMatch

Hello all! I have joined the ItunesMatch recently, and after that I had to restore my iOS on iphone. Since then I couldn't sincronize my music library on Itunes. The only alternative is download my library from iCloud, even having them in my Mac. Any help?

Well, I used to sync my Mac library into my iphone without problems. So I have bought the Match service and a few days later I had to restore my iOs. Sinde then I couldn't sync my musics. My library is all in the cloud as normal, but I can't sync my Mac with my phone by cable anymore. The only way to have my library back into phone is by downloading from the cloud. I can sync my apps without problems, The problem is only the library sync.
So, my library is on my Mac and in my iCloud, but I can only sync with the cloud, not the Mac.

Similar Messages

HELP! can't reload music library after having to reload itunes.

Help! My Dell had to be serviced for 'slowness' problems. We backed up my huge song list to a external hard drive. I made the mistake of reloading itunes before I reloaded my library. Upon the first itunes download, it automatically searched my entire computer and found 3 (YES 3!)songs to go into my library (2 came free with the itunes download and one was in a documents file). When I tried to 'import' my song list, it would only import songs 1 by 1!!!!! Yikes! I have 200+ albums and hundreds of other individual songs. I can't spend 10 days re-importing each song.
I tried removing iTunes tonight. I thought if I re-downloaded the program AFTER my music files were loaded, that it would pick them up and add them back to the music library(like it did the first download). However, no such luck. It won't recognize my song list. Please help me re-load my music files to itunes. Greatly appreciated!
Thanks! Billy

Chris, I tried it a different way....to actually drag the music files and folders into the itunes (program screen), not just into it's music folders. Thanks because it's working.
-B

None of my iDevices can read my iTunes library after an hour of availibility. When I first start iTunes I can read the library, but after about 30 minutes my iPad's and iPhones can no longer access the library. I see it in the shared list, but no access.

None of my iDevices can read my iTunes library after about 30 minutes. My iDevices lose connection to my library and I have to do one of the three following things in iTunes to regain connectivity: 1. Restart iTunes 2: Stop / Start Home Services 3: Start playing a song.
I'ts as if iTunes goes into a background or sleep mode. During the loss of connectivity my iDevices show that there's a library shared, but I cannot connect to it.

Smae issue here, but I'm unable to get Home Sharing started again (after MAc and iOS restarts, Home Sharing on/off. etc.) This happend a few weeks ago and turngin Home Sharing Off/On fixed the connection issue b/w iPad2 5.1 and iTunes 10.6.1 running on a OSX10.6.8.
I updated to iOS 5.1.1 on iPad2 today, watched a movie and then about 20 minutes into a 2nd movie I lost connection (Sharing tab in Video app disappeared and has not come back.) The update seems like the culprit, but odd it worked for over 2 hours before stopping, odd I can't get Sharing to work anymore (iTunes see's my iOS devices b/c I can conenct to iTunes to enter my passcod efor connecting the Remote app.) Appears to be an issue with iTunes broadcasting Home Sharing, even thougt it says it is on.

Library recovery: how can I recover a library after I get this message: There was an error opening the database for the library "/Users/Jim/Pictures/Libraries/K2 Library.aplibrary"???

Library recovery: how can I recover a library after I get this message: "There was an error opening the database for the library “/Users/Jim/Pictures/Libraries/K2 Library.aplibrary”???

Thanks a lot, Frank. The lsregister did the trick! I am testing this on 10.8.2.
http://support.apple.com/kb/TA24770 : I deleted the "com.apple.LaunchServices.plist", and restarted the Finder, even logged off and on again; did not change anything. The file has not been recreated, so it may not be used anymore.
http://itpixie.com/2011/05/fix-duplicate-old-items-open-with-list/#.ULZqa6XAoqY
The direct "copy and paste" from the post did not work: I had to retype it :
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
but then it worked like a charm!
Cheers
Léonie
And btw: I turned on the "-v" option for the lsregister to see, what was going on, and saw plenty of error messages (error -10811); so I repeated the command with "sudo". After that I still saw five iPhotos. Repeating as regular user finally got rid of the redundant iPhoto entries. It looks like registering as super user may be causing this trouble.

I have aperture 3.4.5 but si not available the uograde at 3.5 and i can't open my library after the update to' maverick

I have aperture 3.4.5 but si not available the uograde at 3.5 and i can't open my library after the update to' maverick

Marco,
is your main system language set to English? If not, change the language to English in the "Language&Region" System Preferences (see: Re: I bought Aperture in a box et can't upgrade from 3.4.5 to 3.5.). Then sign back into AppStore and reload the Updates panel.
Other things that could prevent the update are, if you moved Aperture from the Applications folder or renamed it. Then put it back.
Léonie

Can I get music back after formating cpu?

Can I get music back after formating cpu?

If the music was RIP'd from CD, then the fastest way is to restore from your backup.
Since it sounds like you did not have a backup, you will need to reRIP them from your CDs. Nothing else you can do.
iTunes purchases you can redownload. Open iTunes, go to the store, click on Purchases on the right side under Quick links.
Then tell the tech who formatted it for you without making a backup or making sure teat YOU made a backup that his rear end has a vacancy sign and your foot is looking for a place to rent.
and you should make a backup right now of your computer and update teh backup after you RIP all the CDs.
And make it a regualr practice, like weekly, depending on how much you want to lose.

I can see my music library but when I go to shop the itunes store it's blank

I can see my music library but when I go to itunes store it's blank what happened?

I have the same issue with the blank store. I have my music I already have but I can't buy or preview any songs that the store finds for me. That's my main issue.

I can access my music library, but not the Itunes store. Just getting a white screen. It starts to connect but just stops. Any suggestions?

I can access my music library, but Itunes Store is not opening. I am just getting a white screen. Any suggestions?

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that didn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter the Wi-Fi password.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
No data is lost due to a reset.

Can't access music library on iCloud

I can see my music library on itunes, stored on the icloud, but the songs are grayed out and I can't play them. My computer is one of three authorized computers. What's the point of paying for the icloud if I can't play the songs?

correct. Oddly enough, this morning everything appeared to be fine. I could access all of the songs. strange.

I can't open my itunes store. I can open my music library and sync but not open my music store. I have deleted and reinstalled ituens and still not good. Help

I can't open my itunes store. I can open my music library and sync but not open my music store. I have deleted and reinstalled ituens and still not good. Help

I assume you are talking about iTunes on your computer, if so, you will have to remove all Apple programs associated with iTunes:
iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support (iTunes 9 or later)
Make sure everything that is by Apple is removed including Safari. You can sort by "Publisher", when you uninstall programs. Make sure you have at least one other web browser (like Firefox or Internet Explorer) before removing Safari. That way you can go back to the Apple web site and redownload iTunes later.
Reboot the computer then reinstall iTunes. Everything should work normally.

Can i transfer music library?

is there any way that i can move my music library to another computer without having to remove songs from itunes because i dont have enough space in the ipod?
Windows XP

There are a few things you could do, from networking the two computers, using CDs or DVDs as already suggested or using an external hard drive to make the move. Have a look at this User Tip: Migrating iTunes for Windows to a new PC
If you can network the computers there is also this one: Copying songs over a network to use with iTunes for Windows

How do I retrieve my music library after a complete computer crash. I have a backup on a flash drive and I can access my Itunes account but my play lists and music are gone.

How do you retrieve downloaded music and playlists after a complete computer crash. I can log into my Itunes account and make purchases but my music library is gone. I have an external backup on a flash drive but for some reason the music does not show up there either. It's like I have a brand new account and have to start all over. Itunes must have an archive I can access to get my music back, right?
Maya

Playlists should be part of your backup copy.
You can redownload some purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I can not refresh my music library after update

dears
i have just update my phone ie:n73 with firmware v4.0726.2.0.1 and my memory card has 2GB capacity.
but when i run music player i can not refresh my music library. i should remind you that all my songs are in my memory card.
your quick quide is highle appreciated.
ragards
saeed

Hi saeedpenpaller
Do either of these help you?
Remove Memory Card > Insert > then Refresh
Backup Music From Memory Card to PC > Format Mem Card to FAT32 & tranfer all data back > Refresh Music List.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Can't sync music library with iPod Touch

I gave my iPod to my son. He erased my music library and put his on. He gave iPod back. I erased all his music and tried to reload my music library. I updated iTunes from Apple website. Could not successfully transfer ANY music.
I searched through discussions and found some suggestions. I restored iPod to original settings, removed everything.
Apps I originally had on the iPod and some new ones synced beautifully. Music library would not. Unclicked manually managed iTunes. Unclicked Sync all iTunes in library. Clicked APPLY where applicable. Uninstalled iTunes on PC and reinstalled. iTunes will not sync.
I cannot put a checkmark on all songs in the library. The checkmarks will only go so far down and then quit. There are too many to do that manually.
it has 59.42 GB capacity, 4.3.1 software version.
So what do I do to syn my music library? And what are the exclamation marks appearing to the left of the column for check marks? Sometimes they appear and sometimes not.
I would appreciate any help you can give me. I am at my wit's end. Thank you.

http://osxdaily.com/2010/11/24/fix-for-no-content-on-iphone-ipod-after-ios-4-2-1 -update/
For anyone who might read my post and have the same problem, the above link, second option to try work like a charm. I have my music back. I had to go looking for it and clicking on one of the pieces to play it in iTunes worked. Not all the music was located right away but it was still findable.

OS pre-instaled CM12 Client, but it can not automatically find site after joining Domain

Background:
we update sccm 2007 to sccm 2012 r2
For New PC, the OS pre-installed with our image by PC Vendor. The image has sccm 2012 client. So when users get the new pc, we only need to join the domain.
After joining the domain, 2012 client will never automatic locate the site code base on AD.
I do some testing.
Install client in the domain pc with parameter SMSSITECODE=AUTO, the site code can be located
Install client in the workgroup pc firstly, the join the domain. Client will never automatic locate the site code base on AD
But If I click Find Site in the Advanced tab of the Configuration Manager Properties in
the Control Panel. The site code can be located.

I'm going to guess you're running 2007 and 2012 side by side, in which case you need to look at your boundary groups. In 2007 you simply had boundaries, in 2012 if you don't make boundary groups and assign boundaries and site site assignment to said
group nothing will happen.
If you have upgraded your infrastructure completely to 2012 but haven't upgraded all of your clients yet ... what you should be seeing is the opposite: 2007 clients wont check into 2012 unless you enable automatic client upgrade. Then there's
if you have overlapping site codes between the two systems.
Better detail See:
https://technet.microsoft.com/en-us/library/gg682060.aspx
Assignment scenario
Assignment outcome
You have used automatic site assignment and your System Center 2012 Configuration Manager boundaries overlap with Configuration Manager 2007 boundaries.
The client automatically tries to find a System Center 2012 Configuration Manager site.
The client first checks Active Directory Domain Services and if it finds a System Center 2012 Configuration Manager site published, site assignment succeeds. If this is not successful
(for example, the System Center 2012 Configuration Manager sites is not published or the computer is a workgroup client), the client then checks for site information from its assigned management point.
Note
You can assign a management point to the client during client installation by using the Client.msi property SMSMP=<server_name>.
If both these methods fail, site assignment fails and you must manually assign the client.
You have assigned the System Center 2012 Configuration Manager client by using a specific site code rather than automatic site assignment, and mistakenly specified a site code for a Configuration
Manager 2007 site.
Site assignment fails and you must manually reassign the client to a System Center 2012 Configuration Manage

Can't sincronize music library after joining ItunesMatch

Similar Messages

Maybe you are looking for