Can't size Project Elements Tab

Since yesterday my "Project Elements" Tab, in German "Projektelemente" in lthe latest Premiere Elements Version can't be resized. Normally i put my mouse in the bottom right corner and scale the window big, but this isn't possible anmore.
I un and reinstalled the complete Premiere Elements Software, but it doesn't work anymore. I can scale it to the right, but not in y direction.
What can i do?
I uploaded a screen, marking the relevant areas.
Best regards,
Andreas

Andreas
I am strictly an Elements Windows person. I have never seen Projects Assets resized to that minimal size. The lowest size that I can get with Premiere Elements 12 Windows is
Let us try deleting the Premiere Elements 12 Mac settings file. The settings file is named
Adobe Premiere Elements Prefs
I am 99.9999% certain that you should find it in Mac...
User/User Name/Library/Application Support/Adobe/Premiere Elements/12.0
and in the 12.0 Folder should be the Adobe Premiere Elements Prefs file that you delete.
Please let us know if that worked for you.
We will move forward on this based on your reply.
Thank you.
ATR

Similar Messages

No option to Re-size project :(

A colleague of mine was recording a 4 min video in Captivate with the correct resolution, 1280x996. She is not sure what she did, but the resolution has changed to 1280x774 and I am unable to resize the project.
When selecting the video layer and going to 'Modify', there is no option available for 'Resize Project'. I have tested with a different video I have created and I have the option.
Any idea how we can resolve this without re-recording?
She is using the 32bit client and when recording a test video and emailing to me, there is still no option. I'm using the 64bit client where I can re-size projects I have recorded.

Maybe with a real video editor like Premiere Pro? You need an editor that is capable of 'cropping' since you keep the same width but needs smaller height. Is that acceptable, because you'll lose part of the screen.

How can I select the minimum size of Elements 10? It won't install due to lack of disk space on C:

I have just purchased and downloaded Elements 10. Can't install it due to insufficient disk space on my C drive. I have enough space on my D drive, but it will not install there, probably because my sustem files are on C drive. The Install wisard does not provide for a selection of the size of Elements 10. Is there a way to select the minimum size? If so, how can I do this?

There is not an option to customize the installation. The system requirements for Photoshop Elements 10 request that you at least have 4 gigabytes free, plus more for installation, how much free space do you have on your C drive?

How can I size a photo 13X11 with elements 12?

how can I size a photo 13X11 with elements 12?

What is the size of the photo to start with, and what is the resolution? And, is 13x11 in cm. or in inches?

Can I change the size of the Tab itself?

I am designing a program that will run on a touchscreen computer, is
there any way to enlarge the size of the tab on a tab control to make
it more touchscreen friendly?
Ron

The Properties Appearance page gives some options for modifying tab sizes. If that is not sufficiently flexible for your needs, a recent thread discussed using other types of controls, such as buttons, and property nodes to select the tab the user wants.
Lynn

How can I create an element in the model node?

Hi, Experts,
I create a model node that name is containerNode in the contxt. Cadinility is: 1..n
I write the code in the method:
private String getDataForOutputTable( IWDNode wageTypePayslip, IWDNode containerNode ){
     String betrgSumStr = "";
     int index = 0;
     Vector containerVector = new Vector();
     int size = wageTypePayslip.size();
     IWDNodeElement element = containerNode.createElement();// The system report error when I run the application.
     BigDecimal betrgSum = new BigDecimal( 0 );
I try to create a element in the containerNode, But the system report error when I run the application.
java.lang.IllegalArgumentException: model object must not be null
     at com.sap.tc.webdynpro.progmodel.context.ModelNodeElement.<init>(ModelNodeElement.java:66)
     at besuretech.com.wdp.IPrivatePayDataDispView$IOContainerElement.<init>(IPrivatePayDataDispView.java:1537)
     at besuretech.com.wdp.IPrivatePayDataDispView$IContextNode.doCreateElement(IPrivatePayDataDispView.java:88)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.createElement(NodeInfo.java:884)
     at com.sap.tc.webdynpro.progmodel.context.Node.createElementInternal(Node.java:1351)
     at com.sap.tc.webdynpro.progmodel.context.Node.createElement(Node.java:1370)
     at besuretech.com.PayDataDispView.getDataForOutputTable(PayDataDispView.java:251)
     at besuretech.com.PayDataDispView.getAllData(PayDataDispView.java:196)
     at besuretech.com.PayDataDispView.onPlugPayListViewIn(PayDataDispView.java:154)
     at besuretech.com.wdp.InternalPayDataDispView.wdInvokeEventHandler(InternalPayDataDispView.java:391)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:881)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
How can I create an element in the model node ?
Best regards,
tao

Hi,
You need to execute the model before creating the element.
Regards
Ayyapparaj

How do you increase the size of the tabs in excel?

Hello,
I am working with Excel on the new 27" iMac, can anyone inform how you are able to increase the size of the tabs on each worksheets?
The software is OfficeMacs 2011.
Thanks,
A

http://answers.microsoft.com/en-us/mac?auth=1

Can I use AWT elements in a JSP, and so could I generate events with them?

This is because I�m doing a simple JSP that showing a button, my JSP is:
<html>
<%@ page import="java.awt.*" %>
<%! Button b = new Button("Hola!!!"); %>
<% add(b); %>
</html>
But when I tried to see the button in the browser, my JSP generates the following:
Compilation of '/RAID5/weblogic/myserver/classfiles/jsp_servlet/_gep/_alterno/_23_mayo/__mr4.java' failed:
/RAID5/weblogic/myserver/classfiles/jsp_servlet/_gep/_alterno/_23_mayo/__mr4.java:79: cannot resolve symbol
probably occurred due to an error in /gep/alterno/23_mayo/mr4.jsp line 7:
<% add(b); %>
Could somebody help me please?.....
Can I use AWT elements in a JSP, and so could I generate events with them?
Thanks!!!

There are 2 ways to run a web page dynamically:
1) Reload the page via use of javascript or some other scripting language.
2) Use an applet to regularly check a URL for the data
Remember, as Paul pointed out, JSP's only generate HTML output. AWT components need to run inside a JVM not a just the browser.
I could recommend an applet but you may have problems with IE6 not supporting java. Otherwise there shouldn't be too much of a prob.
If you prefer to use an AWT/Swing setup (for example an application) rather than a JSP setup, Webstart is good for delivering online applications which operate standalone or remotely.
When you consider that the Java-Plugin and the Webstart puligin are about the same size it's just a matter of weighing up who your target clients are and whats easiest.
Cheers,
Anthony

Accessing Project Workplan tab via a link

What is the correct structure for the url to display the Projects Worplan Tab showing a Gantt Chart for a specific Project?

Ed - Just try it, it should work. Can you show an example of such a URL here?
We also have session state enabled, would we need to disable this?
Session State Protection? No, but the checksum type used in generating the link would have to be a "public or private bookmark" type. The checksum type can be specified in the call to apex_util.prepare_url.
My advice is to get the generic deep-linking behavior working first, then work on getting the SSP checksummed URL pieces working.
Scott

Setting paper size for multi-tab numbers file?

i have a (currently) 3 tab spreadsheet that someone is working with me on. two of the tabs i print to 12 x 18 and one of the tabs i print to 8 x11.
right now i have to open inspector, set paper size to 8 x 11, go to print view and slider-scale to appropriate size so it will print to single width, open print dialog, select 8 x 11 printer, print the pages from this tab. then i go back to inspector, select 12 x 18, select next tab, go to print view and slider-scale to appropriate size so it will print to single width, open print dialog, select 12 x 18 printer, print the pages. then i select the next tab, go to print view and slider-scale to appropriate size so it will print to single width, and run a print to 12 x 18 paper.
this gets me all three documents if i didn't make a mistake somewhere and forget to select the correct printer or open inspector or whatever.
can someone tell me whether in numbers i can set a PAGE SIZE for a TAB (as i have done above) and have it stick or does the selection of a page size in numbers apply to the whole document? i keep sending this to my bookkeeper and getting it back and this is a whole lot of aggravation that is really messing up my workflow and there seems like i should be able to find a way to streamline this.
note: i am actually /receiving/ xls from my bookkeeper (and exporting to xls when i send it to her) and we also need to keep the tabs together b/c one tab is pulling info from the others but i am wondering if there could be some kind of workaround.
i'd like to ask her to just print the pages to pdf before she sends it to me but this is an added layer of work on her end that is not going to happen. also, i /can/ open in excel (i have excel for the mac) so if this works easier by printing from excel i will do that.
any experience with this issue would be greatly appreciated.
THANKS

hi Y. BIG time thank you for this. i was not aware this was such an issue. i definitely cannot have any ambiguities in my spreadsheet and customizing it in numbers is the whole reason i am spending this time formatting (i.e. to make it intuitive and visual).
that said, if accepting excel and then exporting to excel will cause problems i absolutely cannot have this.
can you help me a little more on what the problems are? i have already got a file with two tabs directly imported from Quickbooks (by my book keeper in excel) and a tab that she set up that pulls data from these tabs - and then i have MY tab that i have been customizing and proofing and fixing as i go along. more info on this work below.
are there commands i can run to clean this up?
what is considered OK to do in numbers if i am accepting excel (printing? adding new numerical entries)?
THANK YOU
background: right now i am /mostly/ doing formatting things like adding bold outlines or adding color or whatever but i have /also/ been dragging and dropping some rows to put them in a better place and fixing some cell sums that were either left out by my book keeper or which needed to be added to check THEIR work. are you saying that by doing this i am setting myself up for various formatting issues such as merged cells?
if so, once i finish the format of the spreadsheet and the tabs i can only exclusively open in numbers if this is necessary. are there some commands i can run to "clean up" issues? for instance can i go around the various tabs and unmerge cells to clean things up?
also, i definitely cannot split up tabs into individual documents as the customized spreadsheets are pulling numbers from a set of tabs that are quickbooks imports....

Can I download Premiere Elements 7 trial?

Does anybody know where can I download Premiere Elements 7 trial? My school is using Premiere Elements 7 and I'm afraid I'm going to have compatibility issues with Elements 9 and 7.

That might be a tough one, as PrE 7 is now two years and two versions old, I would anticipate that the trial downloads are long gone.
Also remember, any Project done in any "trial" version will be watermarked, so you might not be happy with the results. This FAQ Entry will tell you more about the watermark.
Good luck, and I hope that someone else might have a URL to the download, but I would not hold my breath, due to the age of that version.
Hunt

I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.

I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.

goldstein
Please define what you mean by
I can not get Premiere Elements 11 to work on my Windows 7 , proffessional computer.
Can you not install the program? If you cannot, how are you installing it, from an installation disc or installation files from Adobe? Are you looking at the tryout or a purchased product? At what stage of the installation are you blocked and with what messages? Do you have the anti-virus and firewalls turned off? Do you have another other computer protective software installed such as NetNanny?
If you are getting through the installation OK, are you able to Sign In after the installation and restart of the computer?
If you get into the opened project, when does the problem first manifest itself? Is the problem in a new project or in an existing one?
Is the problem in one of the editing features?
Is the problem in one of the export choices?
Other?
The answers will be in the details which allow us to help you.
Thanks.
ATR

Hiding project remark tab.

Could anyone help in hiding the project remark tab in CBIHM2 (edit measurement project tab)?
I have tried using SPRO>EHS>IHS>Basic Settings>Configure tab pages, for object type MP; but it doesn't show "Project remark" in it.
Is there any other alternate.
Please advice.
Thanks,
Regards,
Apoorv

Hello,
You cannot see this tab because it isn't a SAP Standard tab. It probably was created on IMG "Assign Value Assignment Types to Classes", using an VAT and Class.
Please check if you find this VAT linked with Object type MJ !
On this IMG, you can also hide the tab by restricting tha to an object or editing the object type assigment.
Hope it helps!
Br,
Raphael

Hide 'Search' and 'Project Charter' Tabs

Hello,
   I want to hide 'Search' and 'Project Charter' Tabs, but depending on the project type that is selected.
   I'm able to hide others tabs with BADI DPR_DETAIL_TAB_CONTROL and SPRO>>>basic setting>>>Define initial view for cProjects (like it's said in another thread of this forum)...
   And I can hide these two tabs by unchecking the visible checkbox in the corresponding webdynpro component, but it hides the tab for all the projects...not only one...
   Can anyone help me?
   Regards,
   Juan Carlos

Hello Matthias,
I had seen 'Project Charter' checkbox in SPRO>>CProjects>>Structure>>Define Project Types...but it becomes checked automatically after I uncheck it. I forgot writting it first time, sorry.
About 'Search', I can't find it.
In Activate Function Section i only have the next checkboxs (X-Checked; -Unchecked):
Documents ............. (X)
SAP DMS
Control Plans
Versions
Object Link
Shopping in SRM
xRPM ................... (X)
Project Charter ....... (X)
Thanks for all
Juan Carlos
Edited by: juan carlos vazquez gil on Nov 24, 2008 2:23 PM

'Project Cycle' tab is missing ...

Hi,
In t_code solar_project_admin I go to the 'System Landscape' tab, and then the 'Project Cycle' tab is missing ... exist only : Systems , Central Objects and IMG Projects tab.
Can any one of you help me in this regard.
Thanks
Venu Madhav

I had the same problem. Actually Jason is right, it's called "Change Requests" now. If you don't see that tab as well, go to SPRO --> SAP Solution Manager Implementation Guide --> SAP Solution Manager --> Configuration --> Scenario-Specific Settings --> Change Request Management --> Standard Configuration --> General Activities --> Activate Integration with Change Request Management:
1.) "Activate Change Request Management and Set-Up Client" --> set your CHARM client
2.) "Integration Solution Manager" --> Enter application S (Change Request Management) and destination NONE
--> IMG documentation says something it's not required nevertheless this entry must be maintained
3.) "Integration Change Request Management" --> enter
Appl                         +              Dest          +              +
CHARM                     W     NONE     CUST620     1.0
CHARM_DEST     W     NONE     CUST620     1.0
--> not documentated properly in the IMG documentation as well
For me, is was especially 2.). After I made that entry, I had the tab "Change Requests" ... and new problems ...
Cheers,
Andy

Can't size Project Elements Tab

Similar Messages

Maybe you are looking for