Can't skip more than 2 data labels in chart

Hi,
I'm working on a report which contains charts (stacked area chart). The data being reported on is samples taken every 5 minutes for a month so there are many elements. CR is writing the X-axis data labels bunched together so they're unreadable. I've found the option Skip Group Labels in the Group (X) Axis Settings dialog. I think I want to skip a lot of entries, say 200 to 300, but whenever I try this I get "Invalid entry: You have to enter a value between 0 and 2".
Can anybody offer any advice?
Crystal Reports 2008 SP3.
Thanks in advance,
leonstr

Hi, if you have 1 record for every 5 minutes for a month, then it won't be possible to show in chart....
Chart is used to show the summary information, but your data is at very low detail level.
Is it possible to divide them into several charts, i.e., one week data each chart, you can create a group based on the date granularity.
Or you can show all data in a crosstable, put the row as your date time.
Thx, Hao

Similar Messages

Can't load more than 2gig on 40 gig iPod. Inexplicably skips too.

I have a 40 gig click wheel iPod that I purchased new 1 1/2 years ago. I've been having 2 problems lately.
One, I can't put more than 2 gigs of music on it. When in iTunes, at about the 2.1 gig point, when I try to load anymore music the iPod will lock up. The only thing I can do is restore it and settle for only using 2 gig worth of the hard drive.
Two, the iPod will skip. Certain songs will skip every time I try to play them, others only sometimes.
I have already tried restoring it and the software is up to date.
If anyone has the solution I'd apreciate a response.
Thanks,
Christian

Sounds about like the same problem I am having. Mine locks up a lot when I try and upload songs to my ipod. Also I can't transfer files to my iPod sometimes, and when I can they are under a gig. Otherwise it locks up and I can't do anything with it. Some songs randomly skip and some lock the IpoD.
Help please. I have tried restoring and what not 500 times.

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

HT1351 i can not store more than 7 gb data in my ipod classic 7 gen 120gb

i can not store more than 7 gb data in my ipod classic 7 gen 120gb

See Corrupt iPod classic. What do you see for the stats?
tt2

I can not store more than 7 gb data in my ipod classic 7 gen 120gb

i can not store more than 7 gb data in my ipod classic 7 gen 120gb

See Corrupt iPod classic. What do you see for the stats?
tt2

Can my 600MHz P-3, 256MB Ram handle a data acquisition of more than 1kHz with waveform chart support?

please suggest tools for acquiring high speed 8 analog channel data.
can my 600MHz P-3, 256MB Ram handle a data acquisition of more than 1kHz with waveform chart support?

Arun,
I have performed data acquisition on a computer with lower specs than the one you described, at rates greater than 1 kHz. I don't quite understand the "waveform chart support" portion of your question, but if you are asking if it is possible to plot the acquired data on a Waveform Chart in LabVIEW, this should not be a problem.
If you have more specific questions, let me know.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How can I create more than one main window in a page of SAP SCRIPT?

How can I create more than one main window in a page of SAP SCRIPT? If anybody helps me I will be obliged.
Regards,
Subhasish

Hi Ganguly,
It is possible to have more than one main window in a same page.
You create a main window and simply you copy and past it in the same page.. it will create first main window name as MAIN and other main windows as MAIN01,MAIN02.... up to MAIN99.
Contets flow from MAIN , MAIN01, MAIN02.......................MAIN99. contents after filling the current window it flows to next window(by default, you skip as well with some keyword not sure could be NEW-WINDOW)
you want print the main window data twice? or you want to create two main window in the same page ?
1. give two copies in the no of copies in the output type screen ( Which pop up is coming after excute the program ).
2. create two page with the same script form.
3. you can write the coding inside the program to print twice the same page.
Hope this information use full to you..

How do I get more than 10 Y axis chart labels on a line chart

I cannot find a way to get more than 10 y axis labels on a line chart. In AppleWorks you set your step size so a size of "10" which in my case equates to labels of 10, 20, 30, ..., 80, 90 and so on up to the MAX value. I would often have 20 or more labels. In iWork the size is the number of labels and the maximum size (number of labels) I can display is 10. With a min value of 30 and a max value of 330 each label jumps 30 points which doesn't give the resolution I need to see...and....when showing the data point values on the page in iWork they overlap each other and are unreadable even when stretched out on legal paper.

What I am calling the X axis (horizontal) you are calling the Y axis. I need more than 10 labels on the vertical axis. Space for text is not a problem. I already have done exactly what you suggest for the horizontal axis. What I need is to get 30 value labels on the vertical axis (You show 5 in your example) along with the many more than 10 I have on the horizontal axis. The 10 through 300 value labels run vertically, and roughly 90 data points, one per day covering 3 months runs horizontally with a date label every 7 days. This graph represents values recorded daily at the same time each day.

Can i open more than one Resultset object

hi in my program i have to retrive data from three table and the data from three
table i have to use in another one
i wanna know that can we open more than one ResultSet object within one
try{
}catch{] block ( i means ResultSet rs = st.excuteQuery(query) more than one time for different -different tables)
or there is any other way to do this

You can only have one active result set per statement at a time.
Depending on the driver you are using you might be able to have more than one active statement (and result set) on one connection. Or not.
Try catch has nothing to do with that.
If you are nesting result sets then it is likely you should be using a join (SQL) which would then only require one result set.

Can't upload more than one photo to facebook

Hallo, I am new to this, so I apologise if I am doing things wrong.
I have a Z2 which is fully up to date and oterhwise doing fine, however for the last week or so I have discovered that I can no longer upload more than one picture from my album to facebook from my phone in a status update.
I have tried deleting facebook and reinstalling from the playstore, but that has not helped. I have checked and I can still upload more than one from my sony laptop.
Can anybody help please.
Fidra

As Facebook is no longer a system app then this maybe a question to put to the developers as a recent update may have removed such features
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Page HTML Body Attribute - can there be more than one in this area?

In "Oracle Database Application Express Advanced Tutorials", Release 3.0, B32469-01 on page 10-10, in the section labeled "Create a Call to the disFormItems Function" in step 6........it reads:
//start citation
In the Page HTML Body Attribute, enter the following:
onload="disFormItems(); first_field();"
//stop citation
My questions are:
Can there be more than one "onload" statement?
If yes, how do you string them together?
Assume the second function I want to add is "disFormItems_local()"
Thank you,
Maggie

Okay, I have figured it out, I believe. So, I will provide my own answer in case someone else is looking for this type of situation in the future.
I edited the page definition by adding another function, disFormItems_local(), to the HTML Header Attribute.
Next, I edited the item's HTML Form Element Attributes to call the function, onchange="disFormItems_local()"
Then, I created a call to the disFormItems_local function in the page HTML Body Attribute, onload="disFormItems(); first_field(); disFormItems_local();"
Other stuff that you will need to know is to be found in Chapter 10 page 8, Enabling and Disabling Form Elements of the 3.0 Advanced Tutorials.

Can there be more than one port for the same logical system

Can we have more than one TRFC port for tranferring data from one logical system to another?
The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.

Hi Shital,
I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
Advantage: Your task would run, no performance problem (http: very good, asynchron)
Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
Regards,
Udo

Can I sync more than one iPhone to the same computer?

Can I sync more than one iPhone to the same computer?
I have one MacBook pro, already have my iPhone synced to it. I want to sync my wife's to it as well so she can share my iTunes library.
Is this possible?

Create a new user login (with a password) for your stuff.
This way, your data won't get mixed up.

I am running a strain gage test and can't get more than 1000 samples

A formor employee left a strain gage VI that I am attempting to reuse but no matter what I do I can,t get more than 1000 samples before needing to restart the loop. In the task timing (of NI-DAQmx) I have set the acquisition mode to N Samples and the clock settings to read 65000 samples at 25 Hz. There is a DAQmx timing(sample clock) VI that resets to finite samples and 1000 per channel when I close it but I have reset it to 65500 continious samples and left it open to no avail. There is a rate input to this sample clock on the front window that I have tried setting to several different rates to no avail. The Vi will run about 15 seconds, collect 1000 samples and then ask to verify the file location to save the data to. Upon verifying the file location the VI will run another 15 sec. loop before stopping for verification again.
If the loop is stopped rather thanhaving the file verified an error is listed:
Error-200278 occurred at DAQmx Read (Analog 1d WFm NChan NSamp).vi:1
The given possible reason given is: attempted to read a sample beyond the final sample acquired.
When I stop attempting to run the VI the block diagram opens with a dark block around file creation block. I need this VI to run for 10 min. collecting samples at about 25/sec. Can someone help me figure out what I am doing wrong?
I have made screen shots of the VI and the error code to assist finding the incorrect programing.
Thank you for your help.
Jim Steinmeyer
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
strain test error.doc ‏493 KB

Thank you,
I was just thinking about being able to increse the size of the doc. for better visability. I have tried working with the rate input for the DaQmx for the sample clock and it does change the frequency of sampling, but I still get just the 1000 samples. I have included Jpegs this time. I have tried to exppand the two DAQ assistants that arn't expanded but am unable to, I also am unable to find a "propertys" command to open them up and see what exactly they do. The nested while loop for output also seems strange to me. Maybe I would be better to attempt a new program but being new to the language I thought using an existing program might be best.
Jim
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
block diagram.JPG ‏134 KB
DAQmx.JPG ‏129 KB

Can Function Return more than One Values ??

Hi Experts,
I would like to ask you Can Function Return more than one values. I Used Function with Out and In out parameter and its working Fine..
1. what is harm using Out and In out parameter in function
2. if we can use Out and In out parameter in Function so what is deffernce between procedure and Function.
3. Is there any Other Way Though which we can return more the One values in Function.
Please advice me...
Thanks
Umesh Goel

Yes/No.
You can return multiple value from function. But, in PL/SQL and not in a SQL.
The following examples demonstrate that -
SQL*Plus: Release 9.2.0.1.0 - Production on Wed Mar 28 17:41:15 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> create or replace package glob
2 as
3    b varchar2(20);
4    c varchar2(20);
5 end;
6 /
Package created.
SQL>
SQL> create or replace function test_mul_out(a in number)
2 return number
3 is
4    cursor c1(eno in number)
5    is
6      select ename,job,sal
7   from emp
8   where empno = eno;
9
10    rec c1%rowtype;
11    d number(10);
12 begin
13    open c1(a);
14    loop
15      fetch c1 into rec;
16      exit when c1%notfound;
17       glob.b:= rec.ename;
18    glob.c:= rec.job;
19    d:= rec.sal;
20    end loop;
21    close c1;
22    return d;
23 end;
24 /
Function created.
SQL> set serveroutput on
SQL>
SQL> declare
2    zz number(10);
3 begin
4    select test_mul_out(7777)
5    into zz
6    from dual;
7
8    dbms_output.put_line('Ename: '||glob.b);
9    dbms_output.put_line('Job: '||glob.c);
10    dbms_output.put_line('Sal: '||zz);
11 end;
12 /
Ename: Avik
Job: CLERK
Sal: 3456
PL/SQL procedure successfully completed.
SQL> Regards.
Satyaki De.

Can't skip more than 2 data labels in chart

Similar Messages

Maybe you are looking for