Can't start after bios upgrade (Satellite L355D-S7815)

Hello,
I have Satellite L355D-S7815 with VIsta.
Just tried to upgrade bios from 1.4 to 1.8 , as per instructions of preparing for Win 7 upgrade. Downloaded required files from TOshiba site, then run upgrade,picked to do it from Windows. After it finished and restarted ,laptop is not coming up.Just stays black screen, noting happens, doesn't boot, no messages nothing comes up.
I've tried to recover bios from a flash drive. Copy .fd file , renamed to "BIOS.fd", then restarted holding FN and F keys, but it still doesn't do anything.
Can anyone have any suggestions how else I could do it?
For example what's a trick to do it from a CD (I can hear that CD kind of starts up when I turn power on), but what would be the key combination to force it to load bios from a cd?
thanks in advance.
Lucjan

Hello jcjcjc,
Please take a look at this document, which contains troubleshooting steps to restoring your BIOS. Please let me know if this helps resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Notebook won't start after BIOS upgrade

Notebook: HP Pavilion dv6-7003
OS: Windows 7 32-bit
An HP update thing just came up telling me to update, so I did, after they were all downloaded/installed I restarted and then it went to a special BIOS screen telling me what to do (not to turn off power, etc. even after screen goes black). So I just left it, and next time I looked (like half an hour later) the screen was still black with just the caps lock key flashing. No matter how many times I try to restart still nothing happens.
I tried to do the thing that told me to hold down the windows key + B and then the power key but that didn't work.
Help please? =[

Hello jcjcjc,
Please take a look at this document, which contains troubleshooting steps to restoring your BIOS. Please let me know if this helps resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

J2ee Can't start after JDK upgrade on system with Wily Introscope

Hello All,
For one of our portal server java patching is done from java 1.4.2.22 to java 1.4.2.25. And on this server Wily Introscope is installed.As per SAP when ever we upgrade java we need to re-create "AutoProbeConnector.jar" and update the JAVA VM parameters in configtool.
I know the procedure to re-create "AutoProbeConnector.jar" if the Introscope agent is installed manually .
Below are the steps to be followed to re-create if it is manual type.
i)Re-create the AutoProbeConnector.jar file
>wily>connector
java -jar CreateAutoProbeConnector.jar -jvm /opt/java1.4 -output
AutoProbeConnector.jar
Output file AutoProbeConnector.jar created.
ii)Setting Java vm parameters through configtool.
Xbootclasspath/p:/usr/sap/ccms/wily/connectors/AutoProbeConnector.jar:/usr/sap/ccms/wily/Agent.jar
Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
-Dcom.wily.introscope.agent.agentName=<AgentName>
But my systems Introscope agent is created automatically by SDM agent.if this is the case we need to re-execute the Introscope agent setup again to re-create the AutoProbeConnector.jar file.
Can you any one tell me the procedure to do this activity, if possible with steps and the paths to be followed.
Classpath parameter file which says it is installed automatically.
ID27689350.JavaParameters=-Xbootclasspath/p:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.2.3.0-2008-08-11/wily/connec
tors/AutoProbeConnector.jar:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.2.3.0-2008-08-11/wily/Agent.jar -Dcom.wily.i
ntroscope.agent.agentName=BPD_JC02_server0 -Dcom.wily.introscope.agentProfile=/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAG
ENT.7.2.3.0-2008-08-11/wily/IntroscopeAgent.profile -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORB
Proxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco
.jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:+UseParNewGC -Xms2048M -X
X:NewSize=320M -XX:NewSize=320M -XX:HandlePromotionFailure -XX:PrintClassHistogram -XX:HeapDumpOnOutOfMemoryError -XX:DisableExplicitGC -XX:MaxPermSize=256M -XX:PermSize=256
M -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Drdbms.driverLocation=/oracle/BPD/920_64/jdbc/lib/classes12.jar -Dsys.global.dir=/usr/sap/BPD/SYS/global/

Hello Jansi,
Thanks for the update.
I have gone through the document, and currently i require to update the Introscope Agent via SMD.
In the document it is mentioned as the navigation
Launch the Introscope Setup application: Diagnostics Setup > Managed Systems>Introscope Agent.
These are the below doubts i have.
1>How should i enter to "Launch the Introscope setup application"
2>and then followed by Diagnostics setup.
Kindly help me in detailed navigation, for example to which server i need to login(is it the Enterprise Manager server ?)
Awaiting your reply.
best Regards
Rakesh

RAC service can't start after upgrading to 10.2.0.4

Hi All,
After upgrading to 10.2.0.4 from 10.2.01 (linux32 with 2 nodes), I am experiencing the following:
1. The rac service (created after the database was created, not the default service) can not start after the database started with "prkp-1030" error.
2.The service somehow is online and available from the "lsnrctl status" command. Further verified that the users could connect to the rac via that service.
3. The "crs_stat -t" command and the "srvctl status service..." also show the service is not running.
Have anyone seen this problem before? what is need to be done to make it consistent.
Thanks,
TN

I found something that might cause this problem.
When I shut down everything (service, db, asm, nodeapps), and start them back on one by one in the opposite order (nodeapps, asm, database). I found out that the service is somehow get restarted when I start the database (when I have yet started the service itself). the lsnrctl status shows that the service is up. but the crs_stat shows the service is down.
My question is that why the service is tied up with the database startup (using srvctl start database -d database_name)?

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

Help Please - X200 will not boot after Bios Upgrade - keeps asking for power on password

Hi there,
I am new to this forum and please let me say a big Thank You for your help in advance.
I am using a lenovo thinkpad x200 running windows vista with service pack 1.
The laptop has always been running fine and has never given me any issues. Unfortunately, all this came to an end yesterday when I ran the system assistant which did a round of updates and it prompted me to reflash my bios.
I did what was instructed and closed all open applications and after the laptop restarted, there was a noise from the harddisk (the sound was basically like what happens if the harddisk suddenly loses power). Then, all i got was a black screen, no harddisk acitvity with only the power cable LED and another LED (with the shape of a N tiled at 20 degrees) on.
I searched the forum and did what was suggested in this entry: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...
This is what I did so far"
I turned off the power, took out the backup battery and waited for about 30 minutes (repeated this step several times, also removing the harddisk) but to no avail.
I removed the RAM and tried booting and there was that characteristic beeping sound.
I replaced the RAM, redid the CMOS clearing, and now there is the Lenovo startup screen. However, there would be an error code 0271 (no date time) and 0251 (something about default configuration). Then, these disappear and all I am left with is the Bios Power On password prompt. Somehow no matter what I type nothing can be input into the field (and I did not create any password as far as I can remember).
I redid the clearing for the power on password by removing the backup battery as suggested at the bottom of this page http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-59377 but it is no use. Each time I restart, even if I press the blue Think Vantage button or F1 or F11, I still get the same 0271 and 0251 error messages and am left with the power on password prompt.
I am really desperate as I really like my lenovo x200 and there is important data on the laptop. I would appreciate any suggestions on how I can solve this. Its amazing how a simple update can turn into such a disaster. Now i know i should never upgrade or update my Bios (or at least proceed with extreme caution).
Anyone can provide some help to get my laptop workin again?
Thank you very much,
Mark

try reflashing your bios?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-70348
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Itunes just won't start after the upgrade

I've upgraded my itunes, and done all the double checks I've found on this site. My itunes just will not start after the upgrade. It's frustrating to say the least because I can't even access my libary or edit my ipod. I've tried everything including uninstalling and reinstalling.. please help! I wanted to put my audio books on my ipod for a roadtrip tomorrow!

Thanks Katrina. I was able to find what I needed through the link that you provided.
To those that are having this problem, here's what I did to fix this issue:
+If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
+1. Open AirPort Utility.+
+2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
+3. Select the specific firmware version you require.+
+4. Click Download.+
+5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
+6. Choose Base Station > Upload Firmware.+
+7. Select a firmware version and click OK.+
+An important note about installing firmware+
+After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
http://support.apple.com/kb/HT1218
I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

HT1349 ITunes failed to start after an upgrade, won't allow me to re-install saying "Apple Mobile Device failed to start, check for sufficient priveleges"

My ITunes library failed to start after an upgrade, now I'm unable to open or re-install. Receive an error message stating that "apple mobile device failed to start, check to see that you have sufficient priveleges to run system". Any help with this? I've tried un-installing and downloading only to get the same message again.

Thank you to "turingtest2", solution for someone else worked for me as well!

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      55
M sid        TNG
M systemid   562 (PC with Windows NT)
M relno      7410
M patchlevel 0
M patchno    42
M intno      20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid        2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm)                         24288    (1104)
M DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
M DpShMCreate: sizeof(ca_adm)                           432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)                      0              (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)                         0              (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm)                       520080 (1016)
M DpShMCreate: sizeof(vmc_adm)                       0              (3208)
M DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm)          64
M DpShMCreate: sizeof(j2ee_adm)       3936
M DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M    pid = 2392
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    workerType = DP_WORKER_DIAWP
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M mode_cleaned_counter = 0
M    control_flag = 0
M    report = > <
M    action = 0
M    tab_name = >                              <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for                  64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
                              711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

SLD will not start after I upgraded Netweaver 2004s Portal

SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy

Hi all. When i try open illustrator cs6 i get the following message: to open illustrator cs6 you need to install the legacy java se 6 runtime. This started after i upgraded my mac to yosemite. I tried looking on java site but cannot find anything. Any sug

Hi all. When i try open illustrator cs6 i get the following message: to open illustrator cs6 you need to install the legacy java se 6 runtime. This started after i upgraded my mac to yosemite. I tried looking on java site but cannot find anything. Any suggestions?

Justin,
In addition to what mo said, some have found that the page with the direct download link,
http://support.apple.com/kb/DL1572
may turn up blank to start with, so it may be necessary to reload the page.

The Connection Server does not start after an upgrade to BO4.1 SP3

Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
Gerd

Hi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

PI7.11(PI7.1 EHP1) sapcpe.exe can not start after upgrade to kenerl patch65

Hi,
When I upgrade PI7.11 kernel (On Operator system WIN2003 server x64 64BIT) from patch level 62 to patch level 65
or higher level 67 or71 with JSPM,
after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
It's worked before patch level 62.
Did anybody occur the same problem?
Can you give me some advice?
In my WIN2003 server x64, I have the follow DLL libraries:
Microsoft redistributable runtime DLLs VS2005 SP1(X86)
Microsoft redistributable runtime DLLs VS2005 SP1(X86_X64)
Microsoft redistributable runtime DLLs VS2005(X86)
Microsoft Visual C++ 2005 redistributable
Microsoft Visual C++ 2005 redistributable(X64)
Microsoft Visual C++ 2008 redistributable SP1(X64)
Edited by: IBM China on Feb 4, 2010 12:55 PM

Hello
Please do not cross post the same issue on different SDN forums.
Rules of Engagement
https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement
-> - Please do not Cross post.
Regards
Mark Smyth
XI/PI Moderator

PI7.11(PI7.1 EHP1) sapcpe.exe can not start after upgrade tokenerl patch65

Hi,
When I upgrade PI7.11 kernel (On Operator system WIN2003 server x64 64BIT) from patch level 62 to patch level 65
or higher level 67 or71 with JSPM,
after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
It's worked before patch level 62.
Did anybody occur the same problem?
Can you give me some advice?
In my WIN2003 server x64, I have the follow DLL libraries:
Microsoft redistributable runtime DLLs VS2005 SP1(X86)
Microsoft redistributable runtime DLLs VS2005 SP1(X86_X64)
Microsoft redistributable runtime DLLs VS2005(X86)
Microsoft Visual C++ 2005 redistributable
Microsoft Visual C++ 2005 redistributable(X64)
Microsoft Visual C++ 2008 redistributable SP1(X64)
Edited by: IBM China on Feb 4, 2010 12:56 PM

> after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
Please check your event log and see if you use the current runtime. A new runtime library is necessary to fix an ATL security issue, see
Note 1375494 - SAP system does not start after applying SAP kernel patch
Markus

Can't start after bios upgrade (Satellite L355D-S7815)

Similar Messages

Maybe you are looking for