Can't start Configuration Manager in UCCE 9.02

I can't start the Configuration Manager. The attach file is the error that shown during I started the Configuration Manager. But Script Editor Tool is working fine. I've checked all connectivity and DNS is work fine.
OS: MS 2008 STD. R2 SP1
SQL: MS SQL 2008 ENT. R2 SP1
UCCE: UCCE version 9.02
Deployment model: ROGGER A + B and AWHDSDDS A + B
All Server sync to NTP Server

I encountered the phenomenon which resembled this by UCCE8.5.
The problem was in DB.
What bad data was interfering with was a reason.
It turns out that the log of UpdateAW is seen.

Similar Messages

Can not start Enterprise Manager web page

I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Don

diego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config"

Help me! why can not start oracle management server?

maybe for my shutdown and startup database abnormal for several
times,now the server oracleorahome81management server can't start
and while i logon to enterprise manager console,it show me a
error as follow
"vtk-1002:The Oracle Management Server you are trying to connect
to is still in the process of initialization. Please wait for it
to start up completely and then try logging in again"
the error also when i restart my machine.
and,the configuration assistant can not logon to database.
but sql*plus,sql worksheet can work normal.

Hi,
Sock Hoon (guest) wrote:
: I have just installed Oracle Application Server (OAS) on my
: machine running Windows NT 4.0 Workstation. When I logon to the
OAS don't run on Win NT with installed service pack 4.
Go back to service pack 3 or apply patch from Developer 6.0 to
OAS.
: OAS manager and tried to start ORB, I got below error message:
: Please wait while the command is being processed on host ssoh_x
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: Starting ORB processes...Returning filename D:
: \orant\orb\admin\.event
: waiting for ORB to be ready...
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: ORB is not responding. Please restart manually...
: I have tried to re-install OAS for the second time. But I still
: got the same problem.
: I plan to use the OAS, together with Oracle Internet Commerce
: Server (ICS) to develop an e-commerce project. I am yet to
: download and install the ICS. I don't have any Oracle databases
: installed in my machine. I'm using MS SQL Server 7.0 instead.
: Please advised me on how to configure the ORB so that I'll be
: able to start the application server.
Best regards Andrew
null

Can't start device-manager.exe under Vista

Can't start C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\bin\device-manager.exe under Vista 32. It works fine under Windows XP
error is java.net.BindException: Address already in use: JVM_Bind
I changed C:\Program Files\NetBeans 6.9\javafx\javafx-sdk\emulator\mobile\toolkit-lib\modules\bootstrap\conf\system.properties
I tried
device-manager.object-registry.host: 127.0.0.1
device-manager.object-registry.port: 61309
no success
my C:\Windows\System32\drivers\etc\hosts consists
127.0.0.1 localhost
::1 localhost
error output is
[   2408] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-ConnMg
rBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Midle
tMgrBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Midlet
MgrBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldc-Profi
lerBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldc-Profil
erBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
ConnMgrBridgeFactory
[   2409] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-C
onnMgrBridgeFactory
[   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling create on cldcnokdp-
MidletMgrBridgeFactory
[   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Called create on cldcnokdp-M
idletMgrBridgeFactory
[   2410] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[   2410] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceAddre
ssManager
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceAddres
sManager
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on DeviceRegis
trationNotifier
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on DeviceRegist
rationNotifier
[   2419] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on HttpServer
[   2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Called start on HttpServer
[   2494] DEBUG - un.jme.toolkit.bootstrap.Batch - Calling start on RapiClientS
ervice
[   2500] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
ess already in use: JVM_Bind
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.bind(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at com.sun.kvem.tools.http.HttpServer.createServerSocket(Unknown Source)
at com.sun.kvem.tools.http.HttpServer.run(Unknown Source)
[   2547] ERROR - sun.kvem.tools.http.HttpServer - java.net.BindException: Addr
ess already in use: JVM_Bind
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
...

I am having the same problem here with Windows 7 64bit. Why are most of Oracle forum posts are left unanswered. Found many people having similar problems, but nobody seems to have the answer. Anybody, please help
Thank you in advance
Regards,
pra

Can't start 9iAS-Management server service in Win2000 pro

After install 9ias, I can't start Management server service. I got error emssage 'Could not start the OracleOra9ias_HomeManagement server service on local computer. Error 1053: The server did not respond to the start or control request in a timely fashion' Please assist me how can I do. Thanks in advance.

I can do now by reinstall 9iAS with select management server.

Can't start Daemon Manager service on CSM 3.1

Hello dear experts!
After i've installed CSM 3.1 on customer server i found that CSM Daemon Manager service can't start. Next error log appears in MS Event Viewer:
"Faulting application dmgtd.exe, version 1.0.0.1, faulting module dmgtd.exe, version 1.0.0.1, fault address 0x00011f96."
After these i tried to start this service manually, but i got next error:
"Error 1053: The service did not respond to the start or control request in a timely fashion"
I did software installation remotely using Microsoft Terminal connection to server.
I have exactly the same problem with Cisco LMS 2.6 which i've installed on another server. Daemon Manager can't start there too.
Could you give me advices what i need to do?

I tried to reboot server and wait for Windows to load services much times, but it did not help my any way. I found error reason: Daemon Manager couldn't start because there was no swap space on my server. I checked syslog file and found the alert. After i tuned swap settings this service started. But there is one interesting fact during CSM and LMS installation: though swap space setting on my server was as "No paging file", but CSM (LMS) installer shows me that i have sufficient swap space. So always check log files (C:\Program Files\CSCOpx\log) if you can't start your CSM or LMS.

Xfce4 Can't Start File Manager or Settings w/Non-Super User

This is possibly a very stupid question, but I've been weeding through the forums and the wiki for a couple of hours now to no avail. I've just installed Xfce and have it working in conjunction with GDM. I can login just fine with my non-root account, but then I'm unable to adjust the Settings or load the File Manager as I am able to do when I login using root.
In the case of trying to load the Settings dialog box, I click on the icon in the panel, and it does absolutely nothing. When I click on the File Manager icon, however, an hourglass appears as if it is trying to load, but then after about 30 seconds the hourglass disappears and nothing opens.
I have installed Firefox, and it works just fine under either account, and so I'm thinking it may be a simple permissions/groups problem...any thoughts?

The ownership of both the .cache and .config directories for some reason belonged to root and not my user. I completely wiped out those directories, and restarted Xfce while logged into my account and it seems to be working now. Thanks for the help xerverius.
On a side note, I also noticed that the .local directory is also owned by root and not myself. There is nothing in it currently but a share directory, but does the ownership need to be changed for this as well? It's completely unrelated to the Xfce problem, but I thought it was a little strange...

Can't start Object Manager after login

Installed EE on a Linux box. Opened web browser (XP PC) and logged on to
tarantella. The webtop appears in my browser, but after clicking Array
Manager or Object Manager, nothing happens.

It's also possible that the DISPLAY is not setup correctly. I started a new
shell-script which copied the ALTDISPLAY to DISPLAY and starts 'tarantella
objectmanager'.
This worked, withoud xauth and XForarding enabled.
- Remold
"Ivo van Gastel" <[email protected]> wrote in message
news:crehgb$lse$[email protected]..
Installed EE on a Linux box. Opened web browser (XP PC) and logged on to
tarantella. The webtop appears in my browser, but after clicking Array
Manager or Object Manager, nothing happens.

Can't start managed server in Oracle Service Bus 10gR3

Using Windows 2003 Enterprise.
Standard install of OSB 10gR3 - only changes from standard are that I also installed the samples, otherwise, it's default install the whole way.
My windows machine name is the same as a name entry in the HOSTS file, as follows
127.0.0.1 localhost
xxx.xxx.xxx.xxx osb-strat
yyy.yyy.yyy.yyy osb-other
I eventually want to setup a domain across 2 machines with 2 servers, one on each, hence the two entries.
For the life of me, I cannot start a managed server for OSB, I keep seeing
####<Feb 27, 2009 10:54:11 PM CST> <Critical> <WebLogicServer> <osb-strat> <Strategic> <Main Thread> <<WLS Kernel>> <> <> <1235737451969> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
     at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
I did manage it once, but then I had problems seeing the second machines Node Manager - I have figured that out, but during my screwing around, I lost how to get the primary machines service to boot - I have not even attempted to boot the server on the second, remote machine!
I have tried creating the domain using the Config wizard and creating the server/machine using the config wizard.
I have tried creating an empty domain using the Config wizard then using the Admin Console to create the machine and server.
I have tried editing the boot.properties in C:\bea\user_projects\domains\TheDomain\servers\Strategic\data\nodemanager
I have tried setting the listening address to the Hostname of the server, blank, to the IP address.
I have tried configuring the service to not do host name validation.
I do see, in the startup logs, that it notes that the hostname resolves to both the external IP and 127.0.0.1
I have tried re-installing (multiple times) hoping to have a fresh start.
I have even setup a Snapshot, post installation so I can re-start configuration from the very start.
I am at my wits end.
Surely, it can't be that hard to setup a vanilla server and boot it?
Any suggestions, maybe even a step by step creation of a single server (other than the admin server for the domain), that boots, starting immediately after installation?
Any assistance would be greatly appreciated.
...Lyall

We also use a boot.properties in ${domain.home}, which may only be for Admin server, but worth checking anyway. Also, I often receive the boot.properties message you're seeing when there's other problems upstream, and I've found the message to be quite misleading at times. For example, if I have a problem with an LDAPAuthenticator or any other security mechanism I'll often see the boot.properties message eventhough the problem has nothing to do with that file.

When I try to start Enterprise Manager 10g after I rename the machine.

OS is Sun Solaris and Oracle version is 10.2.0.1 .
Renaming the machine, I can't start Enterprise Manager by type "emctl start dbconsole" but system show bottom error.
OC4J Configuration issue. [Oracle_home]/oc4j/j2ee/OC4J_DBConsole_Error occurred dur
ing initialization of VM
java.lang.Error: Properties init: Could not determine current working directory.
_[SID_NAME] not found.
How to fix?
And in log file I found "WARNING: inbound connection timed out (ORA-3136)" message many time.
Sometimes clients can't connect to database server although I can connect inside normally so I must reboot machine.
What is a problem and how to fix both problems?
Thankyou

Check Settings>Messages>Show Subject Field and make sure it's set to "Off".

Oracle Apps 11.5.10 How to start configuration.

Hello All,
Im stuck 11.5.10.2+ in a new installation that is working and nobody use for configuration problems since Dec 2005, this project has passed to me now.
When some body here decide to use oracle 11i they start to configure the software with iSetup and they never end. Now isetup is not longer available and Im stuck in how to push the configuration and do wherever needed to make this work.
My question: How can I start configure Oracle Apps 11.5.10.2 or exist something similar to iSetup that can help to reduce the work and increase the accuracy.
Any help will be welcome.

iSetup is used to copy setups between two or more instances, and reporting on setups in an existing instance. But you can not configure a new instance out of scratch using iSetup. You can copy the setup from an existing instance.
Note:176465.1 -
Oracle iSetup supports rapidly configuring a new E-Business suite instance, copying setups between two or more instances, and reporting on setups in an existing instance.
iSetup is deployed in two parts.
iSetup Configurator runs on the web, external to your installation of the Oracle E-Business Suite. To use iSetup Configurator, connect to http://isetup.oracle.com (now decommissioned - read next note).
iSetup Migrator and Reporter are part of the Oracle E-Business Suite that you access using the Oracle iSetup responsibility. You also use iSetup Migrator to load a configuration you create using iSetup Configurator.
Note:306512.1 -
The iSetup Configurator does not support the 11i10 release of the Oracle E-Business suite. If your implementation plans extend beyond the 31st of May 2005, we suggest that you check with your consulting partners for information about solutions that may suit your needs.
The Migrator and the Reporter components of iSetup, which are a part of the E-Business suite, would continue to be enhanced and supported.
---------------------------------

Can't start UCSM after java upgrade

Hi
After I have been recommended to upgrade to newest java, I can't start UCS Manager anymore.
I try from a Windows 7 64 Bits computer and a Windows 8 64 Bits computer.
Same error.
As you see, I have java 1.7.0_07. It is higher than the reguirement.
UCSM version is 2.0(2q)
Because there is some security issues with earlier java versions, I don't want to downgrade.
Do anyone have any solution on this problem?
I have uninstalled every version of Java, and just installed the newest, but it didn't help
Thanks for any help.

Hi Sting,
For you to use 1.7 you need to have UCSM version 2.0.3a and above.
http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/OL_25363.html
(check the system requirement section).
At this point, the only option for you is to downgrade back to a 1.6 version.
./Abhinav

Unable to start ICM Configuration Manager in ICM 8.5

Hi,
We are in the midst of setting the unified contact center 8.5.2 on windows server 2008 R2.
We are using CUCM 8.5. As for the icm 8.5.2, the servers are as follows:
1. Router A & logger A & CMPG A & VRU PG A on 1 mcs 7845
2. Router B & logger B & CMPG B & VRU PG B on 1 mcs 7845
3. Administration/ Data server with HDS on 1 mcs 7845
All servers are running ms SQL server 2005 with sp2. When the instance and all components
were created, I could start all services on these 3 servers. But when I tried to open the
Configuration Manager, it showed an error "(-9959) The AWDB needs to be reloaded before
any operations may be attempted. Please run Initialize Local Database."
Then I tried to start the process in the Initialize Local Database windows, it threw out
another error saying "the pipe has ended" following by another message "the process is
completed".
Then I tried o start the configuration manager or the script editor again, the same
problem still persists. I tried to recreate the Administration server & data server component again, but it
doesn't help. I also tried to delete the AWDB but it said the database in current in use.
Did I miss out any important steps here? Appreciate your help to rectify this issue ASAP.
I also noticed version 8.x and 7.5 is so much different. How do I check the each icm
process like the process window in version 7.5?
Thanks & regards,
Eric

Geoff is correct...and I would agree with David as well.
I will try to be more specific and answer both questions:
On Windows Server 2003, SQL Server 2005 Service Pack 3 or higher is the requirement.
On Windows Server 2008 R2, SQL Server 2005 Service Pack 4 or higher is the requirement.
The validation should be enforced in ICM Installer 8.0(1a).
Specifically, if SQL Server 2005 is detected on a machine and if the service pack is not minimally correct, when ICMCCInstaller version 8.0(1a) is run, the following severe error will be displayed to the user as well as being logged in the ICMInstall.log:
"[Error] Microsoft SQL Server 2005 installation does not have a high enough service pack. Cisco Unified ICM/Contact Center Enterprise & Hosted requires Microsoft SQL Server 2005 with Service Pack or greater."
where is 3 when running on Windows Server 2003 and 4 when running on Windows Server 2008 R2.
didn't you see this message when installing it?
The 8.0(1a) full installer contains the same file set as the 8.0(1) FCS version. The difference is in the InstallShield installer, which allows customers to install the product on Windows 2003 or Windows Server 2008 R2 (whereas the FCS version did not allow W2k8). Release 8.0(1a) completely replaces 8.0(1). End user documentation still just refers to 8.0(1) (i.e. you will not see reference to 8.0(1a)).
Note: 8.0(1a) does not have the complete working solution for Windows Server 2008 R2. You must apply the 8.5(2) or higher maintenance release in addition to 8.0(1a) to have a working solution. The MR contains bug fixes specific to Windows Server 2008 R2.
Now, how to see processes...well...say goodbye to that one as it is used to be
No UCCE Process Windows
In Windows Server 2008 R2, session 0, where Windows services run, has no desktop. No user can login to session 0 as previously known as console. And since there is no desktop, no visible object of any type can be displayed. Among such objects are the UCCE process windows. Customers and TAC have long relied on the process windows to diagnose the system and provide a feel good indicator that the system is running. The title bars of some windows are critical for determining things like which side is active. The tracing provided in some windows sometimes made it easier to diagnose or monitor certain conditions, especially in reproduction during a maintenance window. The goal was to make this same information available in another way.
Diagnostic Framework Portico: Process Status Info (title bar)
The status of the UCCE processes is used to be shown in the title bar of the corresponding process window. Since all UCCE process windows no longer show up in the taskbar, users are not able to use the process windows to check the status of the UCCE processes anymore. As a result, process status information was added to the Diagnostic Framework Portico.
The Diagnostic Framework Portico is a web-based GUI that list the current running UCCE processes.
You can also access the Diagnostic Framework Portico by choosing All Programs > Cisco Unified CCE Tools > Diagnostic Framework Portico.
Note that the process status information is now displayed. Additionally status changes and low uptime is highlighted. Uptime will be red if uptime is less than 10 minutes and yellow less than 30 minutes. These will also be underlined. This will help to identify cycling services. Status changes will be highlighted and made bold when a process's status changes. This highlighting will last for 10 minutes or until the status returns to its original state. Also as compared to the original page, the vertical space has been used more efficiently to fit more processes on a single page without scrolling. There is also a refresh checkbox which when checked will refresh the page every 5 seconds. It is checked by default.
EMSMon: Process EMS Messages
In Release 8.5(2), for Windows 2008, process windows for ICM processes are no longer available. The title bar status information is available in the Diagnostic Portico; however, real time data does not appear there. To address this, Cisco recommends that partners and TAC use EMSMON as a replacement.
EMSMON has been with UCCE/ICM since the earliest versions of ICM. EMSMON displays logged messages from a process as they are logged. It displays the same content as the former process windows. The two exceptions are the title bar and stdout and stderr output. Events are logged for all processes and appear in EMSMON. However, rare error condition messages (shelled processes, and so on) that go to stdout do not appear in an EMSMON window.
You can start EMSMON while the process is up or down. If the process is down, EMSMON displays messages from the process when the process starts. EMSMON does not end when the process ends. To end EMSMON, press CTRL+C or close the window.
Note: To prevent ICM processes from queueing too many EMSMON messages and exceeding the system memory, ICM processes may drop queued EMSMON messages. If this happens, EMSMON clients display a message indicating one of the clients fell behind and there is a gap. This message is also logged in the processes event log. This can happen if a particular EMSMON client is too slow or paused by quick edit or ctrl/s for example.
How to run EMSMON
EMSMON has the same parameters as procmon:
*Instance/Customer Node process,[process] [System]
The System parameter is optional. You can use it to run EMSMON from a machine remote from where the process is running.
For example, if the Instance/Customer Node is ?ucce and you want to monitor the JTAPI gateway on PG1A, type the following:
EMSMON ucce PG1A jgw1
If you are remote and the machine name is UCCEPG1A, type:
EMSMON ucce PG1A jgw1 UCCEPG1A
Note: A trust relationship must exist between the two machines. (Use the “NET USE” command or something similar).
The following list includes some EMSMON facts:
EMSMON (like DUMPLOG) can monitor multiple processes. The use of EMSMON to monitor multiple processes is not discussed here.
A single EMSMON can monitor multiple processes and merge their output (for example, (jgw1 and pim1).
Multiple EMSMONs can watch a single process. For example, you can have a local (on box) EMSMON and a remote EMSMON. Cisco recommends that you use one EMSMON only for each process.
To reserve system resources for ICM processes, it is recommended that you run the EMSMON client on a remote machine that does not host ICM processes. For example, running EMSMON client on side A of a PG and connecting it to a process on side B of a PG is not recommended.
To run EMSMON on a remote machine, copy emsmon.exe, emsmon.pdb, and icrmessages.dll from c:\icm\bin and place them on a remote machine.
You can cut and paste just as in the command windows but it is safer in EMSMON.
You can start EMSMON at anytime, even when the process is not running. (You can have a batch file on a machine to start sessions.)
For history (events prior to EMSMON starting), use DUMPLOG.
To change the number of lines each EMSMON window retains, modify the command window parameters.
With EMSMON, you can have one local connection and five remote connections per process. When the number of connections is exceeded, the oldest session is disconnected with the following message ?You are being disconnected because another user has connected to this named pipe.
If your system is running a heavy call load, your EMSMON connections may disconnect and the following message appears: ? You are being disconnected because the system is running a heavy call load; this connection may impact the performance of the system. It is recommended that you do not reconnect your EMSMON sessions until your system returns to a normal call load
Thanks,
Goran
Please rate with 5 stars if you find this post useful.

I can not start a remote server via Node Manager

There is a workaround to this problem. The issue seems to be
that when the node manager tries to start the managed server
it can not find java.exe in the system path. So please go to
Control Panel->System->...->Environment, and modify your PATH
system environment variable to include the java bin directory
in it.
Then try using the node manager again to start the managed
servers and you should have no problems.
We are aware of the issue and working on having a fix for it.
Savvas
"Rakesh Chauhan" <[email protected]> wrote:
>
Hey Guys!
I am using WLS6.1 on WIN2000 boxes. And I am getting the same error on
the Admin
console when I try to start any of the two
managed servers.
<Sep 25,2001 1:39:12 PM EDT> <Info> <[email protected]:7002><WindowsProcessControl:
online successfully invoked on server 'server90', pid: 0> The interesting thing is that when I start managed server of its own,
it is started
successfully and you can Stop the managed
server from the Admin Console.
Really frusted, I hope I have configured everything correctly. Can somebody
help
me out ?
Thanks Rakesh
"Martin Matthews" <[email protected]> wrote:
This message is simply a message from the Admin Server saying that it
has asked
NodeManager on the remote machine to start a certain server.
To see the logs for server startup then you can find these either on
the Admin
machine at WL_HOME/config/NodeManagerClientLogs/<ManagedServerName>/*.log
or on the remote machine at
WL_HOME/config/NodeManagerLogs/<ManagedServerName>/*.log
Cheers
Martin
"Paul Nixon" <[email protected]> wrote:
I also would like to know the answer to the question below from Vincent.
I am getting
this message in the Admin console from either of my two managed servers
whenever
the console has successfully contacted the Node Manager in managed
server
host.
The Node Manager logs themselves also report "online successful". What
doesn't
seem to happen is WebLogic startup and I haven't found any error log
that explains
why.
I have set the Remote Startup parameters correctly [I think] for both
managed
servers so cannot see what further is required.
Any input appreciated.
Paul.
"Vincent Ducret" <[email protected]> wrote:
Hi everybody,
When I try to start a remote WLS 6.1 server from my computer, I receive
the message
below in my WLS administration console. The Node manager is runningon
the remote
machine and correctly configured, I hope!
What does this message mean ???
Thanks for your help
Vincent
<21 aoÃ»t 01 10:19:17 CEST> <Info> <[email protected]:5555>
<WindowsProcessControl:
online successfully invoked on server 'testserver', pid: 0>

Why SQL services is dont start in configuration manager studio 2012

I finished installing SQL server Management Studio 2012 and that of configuration management studio.
When I wanted to log in did not find server name, and I tried <pc name>\SQLEXpress, still did not work.
So checked configuration management studio and I noticed that usually we see arrow type button (like "play " button) on the picture of CPU beside word- SQL server services on configuration management studio, was not seen.
is it the reason why it SSMS don't find Server name?
I freshly install SSMS, did I miss to install something?
Please help... Thanks

Also, did you install Express edition, if so, Express edition does not have sql Server agent service but you will see that in the configuration manager with Stop button kind of thing and you cannot start that,o do not worry about it
A more appropriate description would be
Express edition has SQL Server agent code inbuilt but is disabled by edition restriction. It is there because when you upgrade SQL Express to Enterprise or Standard Upgrade just need to enable that code to bring Agent services it saves itself from hassle
of writing a code for agent.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Can't start Configuration Manager in UCCE 9.02

Similar Messages

Maybe you are looking for