Can't start film in Elements organizer after upgrade to 12.1

Hello
Upgraded from Elements (Photoshop and Premiere) ver 12 to ver 12.1.
After that I can't start a film (from my Sony RX100), file extension MTS. Worked Before in ver 12.
Says there is a codec missing. There is also a link in the error message, pointing to apple to install Quicktime.
So I installed the new Quicktime. No change
Googled on the error, result install Microsofts new codec pack. Did so. No change
If i start the file from Explorer (with MS Media player och double click) it works fine.
If i start the film from Quicktime it works fine. If I open/edit the file/film in Premiere and then start it, it works fine.
Best regards
Johnny, Sweden

I forgot. Runnning Win7/64

Similar Messages

I can't seem to launch elements 12 after i downloaded,

I can't seem to launch elements 12 after I downloaded it on my mac pro. Any guidance?

did you install it?
if yes, any errors during installation?
if no, install it.

On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

I think you are sailing in uncharted waters with those kind of modifications.
I am only guessing, but if you have not already done so, do a PRAM reset and then trash your FCP preferences.
Big Poppa Chris wrote:
I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
MtD

Why can't i activate my iphone 3gs after upgrading it to ios 6?

why can't i activate my iphone 3gs after upgrading it to ios 6?
It says,
''There is no sim card installed in the iphone you are attempting to activate''
Thanks for your help in advance!
Kayl07

There are several common causes for this problem:
Your security software (Antivirus, firewall, router settings) is blocking access to gs.apple.com, Apple's activation servers. Try temporarily disabling your security applications on your computer.
You have a redirect in your hosts file that defines a different IP address for gs.apple.com. you must delete all references to gs.apple.com from your hosts file (c:\windows\system32\drivers\etc\hosts, or /etc/hosts on a Mac)
Your phone is jailbroken or otherwise hacked.

After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you

Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

Why can't I access my Gmail account after upgrading to YOSEMITE

Why can't I access my Gmail account after upgrading to Yosemite

Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
It is possible that the cookies.sqlite file that stores the cookies is corrupted if clearing cookies doesn't work.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookies files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

MacBook can't see my home wireless network after upgrade to OSX 10.8.5

After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

It appears an SMC reset was required:
HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

Why can't I use word, excel etc after upgrading OS X lion ?

Why can´t I use word,excel etc after upgrading too OS X Lion ?

Office 2004 is a PowerPC app that requires Rosetta to run. Roseeta and thus all PPC aps are not supported on Lion. Further Office 2008's Installer is a PPC app. Office 2008 will run if installed before installing Lion, but you cannot install it from Original Office 2008 Media after installing Lion.
Steve

Why can't I open my numbers docs after upgrade to 3.0?

why can't I open my numbers docs after upgrade to 3.0? I have downloaded Maverick. I had the same problem with Pages at first. Is there any way to get my spreadsheets back? I'm nervous about upgrades anymore.

If you recently updated to Mavericks and updated the Numbers to 3.0 then it is likely you are trying to open a Numbers 3.0 file with Numbers 2.3.
Numbers 2.3 Numbers 3.0
Be sure you are careful about which version you are launching and using to open files. If you want to be able to open a file in Numbers 2.3 then you should continue using Numbers 2.3 (which is located in the folder "/Applications/iWork '09")
If you already opened a Numbers file in 3.0 and saved if but want to open in 2.3 you can export from Numbers 3.0 by using the menu item "File > Export To > Numbers '09..."

I can't activate my iMessage and FaceTime after upgrading to ios7? Help please!

I can't activate my iMessage and FaceTime after upgrading to ios7? Help please! TIA

Try this support document http://support.apple.com/kb/TS4268 for problems with activating iMessage and Facetime.

TS3649 Suddenly i can't export iPhoto slideshows to iDVD after upgrading to 10.8.2 I get the message "CouldNotCreateTmpDir" What do i do to overcome this problem?

Suddenly i can't export iPhoto slideshows to iDVD after upgrading to 10.8.2 I get the message "CouldNotCreateTmpDir" What do i do to overcome this problem? I've been making slideshows for ages using iPhoto and iDVD and it's suddenly stopped. Urgent help needed.

Are you saying that you cannot export a slideshow from iPhoto to the Desktop and then drag it from the Desktop (or the Movie frolder where it can be stored) into an open iDVD menu window?
Export the slideshow at the large or medium size:
They drag the movie file into the open iDVD window. NOTE: do not move the movie file once it's been added to iDVD. That's why it should be placed in folder where you intend to keep it permanently or at least until the iDVD project is completed and burned to a disk image and then to disk.
OT

Can not start up with internal HD after 10.9.4 update

After installing 10.9.4 update, can no longer startup from internal HD on late 2012 iMac, 2.9 ghz, 8 gb ram, 1 TB internal
Used Disk Utility to starup from external 10.9.3 drive and that works fine.
Loaded the manual 10.9.4 update onto external, and tried updating the 10.9.4 internal. No luck.
Attempting internal startup with 10.9.4 results in black screen, followed by several seconds of lit screen and spinning icon, then back to black screen.
After starting up on 10.9.3 external, 10.9.4 internal shows mounted, files appear fine, and can copy back and forth. Just can't start with that drive, and can't risk updating external 10.9.3 to 10.9.4 until I find out and fix the problem.
Thank you

This was reported by another user:
I had the same issue with my 2008 iMac and Apple support walked me through the fix yesterday...
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).
Apparently it's an issue with an automatic update that never quite got past the login screen.
If the above doesn't help, then move on to these:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

Can not start HTTP_server using "opmnctl startall" after applying p4505133

After I apply patch 4505133 on win32
10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER
I can not start HTTP_Server using opmnctl startall, got following error in apache log file:
[Thu Mar 22 22:43:54 2007] [error] (2)No such file or directory: mod_plsql: Please check your enviroment.\nORACLE_HOME is [C:\\OracleHomes\\oms10g]\nPATH is [C:\\OracleHomes\\oms10g\\bin;C:\\OracleHomes\\oms10g\\Perl\\5.6.1\\bin\\MSWin32-x86;C:\\OracleHomes\\oms10g\\Apache\\Apache\\fastcgi;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\bin;C:\\WINDOWS;C:\\WINDOWS\\system32]\nNLS_LANG is [Not Set]
[Thu Mar 22 22:44:00 2007] [crit] (2)No such file or directory: mod_plsql: Unable to initialize Oracle OCI
Any idea what is going on?
thanks,

Thanks for u r reply.
resolved this issue
oracle/middleware/oracle_idm1/bin
oidldapd folder is missing. so we copied the folder from trail environment and placed in above directory and started opmnctl services.
it worked.
Thanks and Regards,
sri485.

Why can't I use elements 12 after upgrading to OS X Yosemite it keeps hanging?

Since I upgraded to OSX Yosemite elements 12 stopped working and hangs all the time.

Have you tried using a magic mouse or wired mouse? Otherwise try trashing the prefs.
Quit Organizer. Launch Finder and hold down the Alt (option key) and click the Go menu; then choose Library. The Library is hidden unless the Alt key is pressed.
Then go to preferences and delete the following files:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 12 Paths
Adobe Photoshop Elements 12 Settings
There are also a couple relating to the Organizer:
com.Adobe.ElementsOrganizer12.plis
com.Adobe.Elements Organizer.12.0.plist
After deleting those files re-launch Elements.

Can I safely uninstall Elements 10 after upgrading to Elements 12

Hi everyone,
Can I safely uninstall Elements 10 after I've upgraded to Elements 12? There's nothing in the library anymore and I backup everything to an external HD.
Thanks!

Hi there,
              There will not be any issue with the uninstallation of Photoshop Elements 10 [ PSE10 ] after you have upgraded [ installed Photoshop Elements 12 ].
              Before you uninstall the PSE10, please make sure that you have the serial number of it. [ Find your serial number at ( Find your serial number quickly ) ].
              If you do not have the installation media, if it's a CD, you can download PSE10 again from [ Other downloads ].

Can't start film in Elements organizer after upgrade to 12.1

Similar Messages

Maybe you are looking for