Can't Start from Install disk or external Hard Drive

I've installed an operating system on a external WD 120Gb hard drive. I am unable to start up from the WD Hard Drive or the Snow Leopard install disk, either by selection them from the Startup disk or by pressing 'OPTION' at startup. Every time one of these is selected, the computer starts from the MacBook internal hard Drive.
I have installed the operating system on an Iomega 1 Tb external and it doesn't show up on the Startup disk or when I start using the option key.
I have reinstalled the operating system on both the MacBook Pro Hard drive and he 120Gb portable.
I  have a 2Gb SimpleTech Dual Pro Drive, which I can see and start up by, using the Option key at system boot.
I have a 500Gb Iomega I am using for my TIme Machine.
I can't figure why I am unable to start up using the Software DVD.

Thanks for the tip. In the end I combined bits and pieces of what I had read on other peope's messages, what worked for me was putting the frozen computer to sleep with the power button and then waking it up with both the mouse and the C key held down at the same time. Individually nothing happened but with both the CD popped out.
Thanks again,
Jason

Similar Messages

  • Can Flash Player be installed on an external hard drive?

    I have this game I am trying to install on an external hard drive that requires Flash Player and even though it is installed on my computer the game keeps popping up with Flash Player is required for this install. Would you like to install it now? Is there any way to install Flash Player on my external or get the game's installer to recognize it being on the hard drive. I don't want to install the game to my computer. Thanks for any help.

    Flash Player is installed on the Windows system32 and syswo64 folders; it cannot be installed anywhere else.
    What does that game require: the ActiveX control, or the plugin?  If in doubt, install both.

  • I can't boot from instalation disk need help

    can anyone tell me why i can't boot from instalation disk
    i burn a DVD with verified iso with MD5 with Nero Express

    i use burn image , of course and
    i have a Sempron +2400 with asus a7s8x mainboard
    and i download all 5 file for DVD x86 and then i copy /b all this files.
    when computer boot from cd the screen is bleu with Solaris ................ v.20 message and after 1 second message became
    Aolaris ..................v.20 and computer remain in this position

  • Can programs be installed on an external hard drive with my mac pro?

    Can programs be installed on an external hard drive.  I am running low on space.  Final Cut Pro X spins off the rendering files which takes a large chunk of space.  Like to at least have those rendered files on an external drive, but can find that option to make it happen.
    Hardware Overview:
       Model Name:   MacBook Pro
       Model Identifier:           MacBookPro10,2
       Processor Name:        Intel Core i5
       Processor Speed:       2.6 GHz
       Number of Processors:           1
       Total Number of Cores:           2
       L2 Cache (per Core):   256 KB
       L3 Cache:        3 MB
       Memory:          8 GB
       Boot ROM Version:     MBP102.0106.B07
       SMC Version (system):           2.6f59
       Serial Number (system):         C02L250VFFRP
       Hardware UUID:          B26BB020-5346-5A3E-BE36-8D63AAF041C4
       Sudden Motion Sensor:
       State:  Enabled
       Hard Drive APPLE SSD SD256E:
    Kent Mechem

    Hello Ian. I am currently using Lion installed on a WD My Passport 500Gig drive connected to my MBPro via USB, which is still running 10.6.8. Like you I am not prepared to lose all my currently functioning Mac, but also like to see how the new OS runs before making the total switch, maybe when it gets to 10.7.2
    So after you download Lion and select to run the installer it will show you which disk to install on, being the default SL drive you downloaded Lion with. But here you can click Other Disk and select the external HD. The installer will run and then boot into the external drive to complete the installation. From then on you can use Startup Disk or the Option key to select the preferred OS.

  • Can I install onto an external hard drive + run off it?

    Can I install onto an external hard drive + run off it?
    If possible, will the system run at the *same* speed as the built in hard drive?
    ALSO: Am I correct in saying that if I replace my current hard drive with an SSD one?
    If so: that *****  
    Thanks
    Omar

    OS X doesn't matter what disk you boot from, as long as it can be formatted properly in Disk Utility. You can boot from a USB stick drive if it's big enough.
    Thunderbolt would be the fastest, the drive would be the limiting factor there. You can find Thunderbolt drives like these at stores like macsales.com. But USB 3 might also feel fast enough.
    If you have boot systems installed on many drives connected to your Mac, the way you tell the Mac which one to use is to hold down the Option key at startup. This will present icons of all the connected drives you can boot from, then you just pick one and go.

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive,  a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

    Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive,  a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

    Install NTFS 3G
    http://macntfs-3g.blogspot.com/
    If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system.  However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
    I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended.

  • I had all photos on a Windows desktop.  Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive.  When I go to import them into LR on the Mac, they are all locked.  Help, please.  Thanks

    I had all photos on a Windows desktop.  Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive.  When I go to import them into LR on the mac, they are all locked.  Help, please!

    "I plugged the external into the Mac and moved a folder of images onto the desktop.  It looks like it went from read only to not locked.  Is this possible?"
    Yes, that's exactly what happened. If you buy another drive, you could copy from your existing drive to the new and your files will be read/write. The new drive will have to be formatted as an HFS drive (that's the Mac's format). If you need to format it, you use Disk Utility which is in the Utilities folder on your Mac. Be careful with that -- it wipes out whatever is currently on the drive. Make sure you format the right drive.
    I keep all my images on an external drive, too. In fact, I have two matching drives and sync them so I always have a backup.

  • Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

    Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

    What are these files you are trying to copy over?
    If they are program specific and there is no program on a Mac to read them then you'll have to find either a Mac version of that program or one that does the same thing and can read those files.
    The file extension should not change just because you connect a NTFS formatted drive to a Mac computer. A Word Document is still a .doc/.docx ad the same for all other office type programs. Music files with an extension of .MP3, or whatever, should read the same on both system. Same goes for all other files like images with a .JPG extension.
    Yes I would network them.
    I would not use Migration Assistant. There is nothing on your Windows PC that can be used on the Mac other than your personal data files. No programs or settings can be carried over from Windows to OS X.
    marimbapony1 wrote:
    Also, when I view the files from the external hard drive, they show up as .nbz and are not recognized by any program on the Mac. Should I just abandon the hard drive option and start sharing files through the LAN approach?

  • I did backup from my Imac to external hard drive, how can I unzip that backup to my mac

    I did backup from my Imac to external hard drive, how can I unzip that backup to my mac again

    It may be Time Machine, but Time Machine doesn't store backups in .zip folders. Open Finder and select your backup external disk in the Finder sidebar, under "Devices". If you are using Time Machine, you should see a folder called "Backups.backupdb".
    If you are using Time Machine and you want to restore a full Time Machine backup, there are different methods depending on the Mac OS X version you are using. Open  > About this Mac, see Version and tell me what version you are using

  • Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

    Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

    If you want a cross-platform solution that doesn't require the use of third-party software, use an external drive with hardware encryption. The device will have either a physical key or a numeric keypad. I don't have a specific recommendation.

  • How can I make a backup to an external hard drive from iPhoto if it won't open?

    how can I make a backup to an external hard drive from iPhoto if it won't open? I just wan't to make a backup to my pictures not my entire computer so how does Time Machine work on that?

      you could also clone the drive or volume, or just some of the user folders. look for carbon copy cloner, then enable the "use checksum to insure file integrity."
      you can have multiple iPhoto Library catalogues in different locations.
    Continue to use TimeMachine and make sure it has 350% or more capacity than your system and data.

  • Can I restore data from a dead Seagate external hard drive?

    I have stored all my traveling pictures on my 2TB Seagate external hard drive. But when I plug the external drive to my PC this morning, it works quite slowly. When I click the external hard drive, it has no response. It seems like that
    the Seagate external hard drive is dead. How is it possible to restore all files from a dead Seagate external hard drive when it has no response?

    Something might be wrong with your Seagate external hard drive. You can try to plug out the external hard drive and reconnect it to your PC again to see if it can work normally. Once you are able to access the Seagate external drive, you
    had better transfer all important data to another device to avoid data loss. If you are unable to access the Seagate, probably there are bad sectors on it. If so, you might have a try with data recovery software like iCare Data Recovery to extract files off
    the external drive. This software is free and reliable.

  • How can you download photo's and video's from an iPad to external hard drive

    How can you download photo's and video's from an iPad to external hard drive for storage.

    Here's the link that explains ...
    http://www.idownloadblog.com/2014/06/02/apple-updates-the-photos-app-in-ios-8-to -work-with-icloud-photo-library/

  • I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

    I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

    Quote from: Richard on 15-November-07, 20:33:05
    tornado2003,
    What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
    After that boot normally and install the latest nVidia ForceWare Drivers
    Take Care,
    Richard
    i guess you missed that:
    Quote from: tornado2003 on 15-November-07, 17:26:52
    ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
    ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

Maybe you are looking for

  • Org.xml.sax.SAXParseException while executing petstore application

    Hi all, I get the following error message when I start the examples server after deploying the petstore application: org.xml.sax.SAXParseException: The encoding "ISO8859_1" is not supported. I have followed the steps listed on the bea webiste exactly

  • Mid 2009 macbook pro 13" not booting from Western digital hard drive

    So i've gone ahead and purchased a Western digital 2.5 inch scorpio black 750gb 7200rpm sata 16mb internal hard drive to replace my critical status 160gb standard drive in my macbook. I have followed a guide using a usb 2.0 enclosure, with my new har

  • Problem with Session variable initialization block

    Hi, I'm getting strange results when using session variables in my repository files. I have created session variables as specified in the document which is available at http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html The

  • Strange images in finder

    Curious thing happening this morning - when I choose cmd-tab to move though applications the image looks like this: Everything else seems to be fine. Is this a harbinger of doom? (Looks very cool.) I'm on a MacBook Pro, 10.7.2 (which has crashed twic

  • Query for an in between date

    I need to make a query that checks to see if the start_date is less than sysdate and the end_date is greater than sysdate SELECT * FROM table WHERE OFFICE_START_DATE < SYSDATE AND OFFICE_END_DATE > SYSDATE What is the easiest way of doing this? Thank