Can't start GTK apps on Kdemod

Hi,
I'm very new to Arch, but I've managed to install some things I need so far. I did a FTP install and then installed x and kdemod, fixed screen resolution, installed nvidia driver, configured alsa. I think I want to stay on Arch, I really like it's speed and the package manager pacman.
Anyway I can't start GTK apps, currently I've Firefox, Seamonkey and Gparted installed but when I click on their shortcuts in K menu nothing happens, when I try to start in terminal I get
gparted
No protocol specified
(gparted:7468): Gtk-WARNING **: cannot open display: :0.0
I have gtk2,glib2,gtkmm and kdemod-gtk-qt-engine installed.

lo enabled?
Don't know how to check.
hostname in /etc/hosts?
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost
# End of file
Last edited by Boreas (2007-11-02 05:55:59)

Similar Messages

Can't start GUI apps as Root.

If i am logged as root i can't start GUI apps like:
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
kate: cannot connect to X server :0.0
should i post xorg.conf?

Kknd wrote:
Fork wrote:That starts the aplication. But i wanted to fix the problem, not get around it. Is it possible?
It's not really a problem, but you can copy your .Xauthority to give the same rights.
It is not a problem, and in fact, using kdesu is probably the safest way to do it. Starting apps as root in X is risky.

TS1702 I can't start any apps in the same page

I can't start any apps in the same page

Fair enough. I am new to this.
The soution to failure of opening Apps after IOS 5.1.1 update in my new IPad is to:
1. Erase all content and setting in general setting
2. Reinstall Apps using ICloud backup service.
Hope it helps others with similar software bug in IOS 5.1.1

How can I start an app on OSX Mavericks without switching to it?

What's up to all my Appleheads!
I usually do my research (extensively if I'm particularly annoyed) regarding any of my Apple questions, but I can't seem to find an answer to the following:
Let's say I'm working in a full screen app (e.g. - Safari) window/space and I bring up spotlight/dock/launchpad to initiate/open/start an app, how can I prevent Mavericks from automatically "pulling" me to the designated window where the app is loading? I would like to be able to continue working on whatever it is I'm working on while at the same time have my app of choice start up in the "background" without being brought to it while it's still starting up. I know I'm not the only person that finds this behavior annoying, as I've seen it phrased a number of ways, but this question in particular hasn't been addressed (that I can find).
A little info:
Early 2011 13" MBP
8gb RAM
500gb HDD
OSX 10.9.4
P.S. I've already tried the 'When switching to an application, switch to a Space with open windows for that application' within Mission Control settings. This does not yield the result I am searching for.

Welcome to the Apple Support Communities
On the iPhone, open Settings > iTunes and App Store, and turn off Apps

I have downloaded a game app in itunes. My OS is windows 8, how can I start the app to run?

Hi, I recently installed itunes on my PC. I downloaded a game app and it is showing in the main "apps" screen, but unfortunately I can not run or start the app. clicking on it does not open or do any thing.
I will aprreciate any help!
thanks.

Apps downloaded via iTunes will be for iDevices only. They will not run on a computer.

How to deinstall cloud ? can't start my apps !

i have cs6 design and web premium licence and i don't want to be a cloud membership in the moment. actually i can't use my apps, because all the time i start a app, an window open to sign in to my testversion !!!. i just wanne use my licened
version. And i need to finish a job over the weekend, but i can't. please help. thx. michael.

Hi wr2010,
You will have to uninstall all the creative cloud applications one by one.
Programs and features for Windows
and for Mac go to Applications --->utilities --->Adobe installers
Thanks
Kapil

Lightroom: configuration error 5. Can't start the app. Can't deinstall.

I am trying to start lightroom CC.
I get a configuration error message.
After deleting the app from the application folder, I can't download a new version or reinstall or anything.
How can I re-downlaod something from CC?
How can I thouroughly delete an app?
Any ideas?
Thanks

Hi e27ap,
Seems that after deleting the app you are still seeing the app as 'Up to Date' in AAM
Please refer the Kb : CC desktop lists applications as "Up to Date" when not installed
For Configuration error please check : Configuration error 16 | CC, CS
Regards,
Rave

I can not start my apps and in my CC panel appears like I have never installed anything.

I was sorking this morning with my apps, and an update failed, and I got the blue screen. After that I was not able to start any of them, and it appears like I have never installed them. I am trying to reinstall and it is taking FOREVER.

if your adobe programs do not work, uninstall them, run the cleaner (http://www.adobe.com/support/contact/cscleanertool.html), restart your computer and reinstall your adobe apps, https://creative.adobe.com/.
if your adobe programs work but the cc panel shows none are installed (so you cannot update), use solution 2 here, http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html even though that problem is the opposite.

Installed 1.7.0_40 and can't start any apps built previously.

I installed the u40 release today, and I use NetBeans 7.3 as my development environment. After I tried to build a couple of projects against the new release, and finding I couldn't run them from within NetBeans (java.lang.UnsatisfiedLinkError: com.sun.glass.ui.win.WinApplication._invokeLater(Ljava/lang/Runnable;), I went back to u25 and I was able to build and run from within NetBeans. But then I went to try to run some previously built applications (built against u25) and they won't run at all. I'm thinking it might have something to do with the packaging, but I don't know, and I'm not even sure how to find out what the problem is.
This is critical, because in my company some users may update their version of java, and if they do, my applications will cease to work.
My projects are maven projects, and I use the zenjava javafx-maven-plugin to package the apps.
TIA,
--Kevin

I found a solution to my problems here: http://blog.maurus.be/2012/12/02/javafx-and-maven/
By changing my pom to point at the local jfxrt.jar file instead of the one that was in the com.oracle repository, I was able to build apps that I can run stand-alone and against older version of the java jre. But then I couldn't run inside of netbeans, so the link above gives information on how to fix that problem. It has to do with exec-maven-plugin omits adding the system-scope dependencies to the classpath. Adding the location of the jfxrt.jar file to the bootclasspath. Hopefully this will help others who are suddenly facing the same problem.

How can I start the Apps R12 DB?

We have R12 on AIX server.
The DB of the Apps got shutdown or the listener is down, Iam not sure.
When using the apps filesystem owner and typing sqlplus, it says: no listener
When using the DB filesystem owner and typing sqlplus, I am able to log on the DB.
I don't know how to startup this DB of the apps.
By the way this is VISION Demo Installation, and I wonder there is no support for this type of Install.
The proof for that is , I cannot run active users or active responsibilities and users,
When I searched using the log file, my search drew a blank!
Any help would be appreciated.
thanks

[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u03/oracle/VIS/inst/apps/VIS_nmcretek01/admin/install
adgendbc.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u03/oracle/VIS/apps/tech_st/10.1.3/perl/bin/perl -I /u03/oracle/
VIS/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u03/oracle/VIS/apps/tech_st/10.1.3/pe
rl/lib/site_perl/5.8.3 -I /u03/oracle/VIS/apps/apps_st/appl/au/12.0.0/perl -I /u
03/oracle/VIS/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/aix
-thread-multi /u03/oracle/VIS/inst/apps/VIS_nmcretek01/admin/scripts/adexecsql.p
l sqlfile=/u03/oracle/VIS/inst/apps/VIS_nmcretek01/admin/install
afwebprf.sql INSTE8_PRF 256
amscmprf.sql INSTE8_PRF 256
amswebprf.sql INSTE8_PRF 256
bisadmprf.sql INSTE8_PRF 256
bisdblrp.sql INSTE8_PRF 256
clnadmprf.sql INSTE8_PRF 256
cncmprf.sql INSTE8_PRF 256
cseadmprf.sql INSTE8_PRF 256
csfadmprf.sql INSTE8_PRF 256
csiadmprf.sql INSTE8_PRF 256
eamadmprf.sql INSTE8_PRF 256
fteadmprf.sql INSTE8_PRF 256
ibywebprf.sql INSTE8_PRF 256
icxwebprf.sql INSTE8_PRF 256
oksfrmprf.sql INSTE8_PRF 256
wshadmprf.sql INSTE8_PRF 256
Directory: /u03/oracle/VIS/inst/apps/VIS_nmcretek01/admin/install
adadmprf.sh INSTE8_PRF 1
afadmprf.sh INSTE8_PRF 1
afcpctx.sh INSTE8_PRF 1
afcpgsm.sh INSTE8_PRF 1
igccmprf.sh INSTE8_PRF 1
jtfictx.sh INSTE8_PRF 1
okladmprf.sh INSTE8_PRF 1
txkJavaMailerCfg.sh INSTE8_PRF 1
txkWebServicescfg.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
-thread-multi /u03/oracle/VIS/inst/apps/VIS_nmcretek01/admin/install
adadmat.pl INSTE8_APPLY 256
AutoConfig is exiting with status 29

Since I have Maverick, my children can't start any app when they are on their accounts

I installed Maverick and since that, when my children open their counts as users, they are note able to start any application, neither Safari, Mail, Word, nothing...

The only thing I found that was related is here: http://reviews.cnet.com/8301-13727_7-57523360-263/fixing-parental-controls-probl em-in-os-x-10.8.2/
I don't have manage accounts, so I'm not sure if the files are in the same place.
If they are, I would first convert the accounts back to standard, then apply steps 2 and 3.

Can Java start another App & return to Java after closing?

Can I launch another application from Java...
And, when that application ends, return to my java application?
If so, can someone give me a hint on how to do this.
Thanks,
Will

class Runtime
public Process exec(...)
class Process
public int waitFor()

How can I start downloading apps again?

It isnt taking my card details when it was fine before!

If you need to, Contact iTunes Customer Service and request assistance...
Apple Support iTunes Store Contact Us

Start jclient app on 9ias rel2

I have developed and deployed (from JDeveloper 9031 to local DCM) a jclient application with bc4j bindings on swing components (such as the demo at
http://technet.oracle.com/sample_code/products/jdev/jclient/jclient_binding_demo.html)
The deployment looked ok, can't start the app though. I've been trying some URLs such as:
http://host.dommain.suffix:7777/j2ee/appname
http://host.dommain.suffix:7777/j2ee/appname/index.html
I would very much appreciate some help.
Regards
gabriela

Gabriela,
A JClient application is different from a Web application, the problem is in the way you are trying to access your app.
Typicaly a JClient app is deployed to a local machine and run be typing:
java mypackge.myclassIf you appliaction is deployed properly with all needed library in you classpath the above should work fine.
Good luck
Llies

TS1702 I have an app that appears to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?

IPhone 5
I have an app that appeared to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?

Locked on an update can mean a couple of different things. So there are a number of things to try, but start with these.
If you have a "waiting" icon, try tapping on the icon and see if you can pause the update/download. Of it pauses, tap on it again and see if it will resume.
Try holding down on the icon until all of the icons on the screen wiggle. If the X to delete pops up on the waiting/stalled app - tap the X to delete the app. Tao,the home button and the apps will stop wiggling.
You can also try this and see if the downloads will resume. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Can't start GTK apps on Kdemod

Similar Messages

Maybe you are looking for