Can't start in Safe Mode or any mode - hangs on mup.sys driver
Can anyone help me. I have done a few searches on the internet and see that this is a familiar problem. I was using a usb storage key and someone removed it without doing so safely - my laptop then froze and the only thing I could do was turn it off at the on/off key.
Now I can't do anything - it just repeatedly goes to the same page saying that as there was a problem choose a way to start - I have chosen every single one and nothing - it loads up until this driver mup.sys and then just goes straight to the same page again. I have run out of ideas.
Can anyone help?
I am trying to avoid the recovery disc as I really don't want to lose my work yet but realise that may have to happen, mind you I have read reports that it still hangs even when you try that option.
Thank you Rachel
Hi Rachel it sounds very much like a problem I had with my laptop a while ago. It boots up for 3 seconds, blue screens and back to the start. Unfortunately there's very little you can about it but backup your files and reinstall Windows using the product recovery DVD. To back up your files you need to get access to your files using a bootable CD/Floppy with NTFS support For this I recommend the following:
http://www.nu2.nu/pebuilder/ - BartPE (needs an XP CD with SP1+). BartPE boots directly from your CD-ROM it provides a basic Windows environment with networking LAN support and external USB flash drive.
http://www.knoppix.net/ - Knoppix bootable Linux CD (sometimes found included with computer magazines) this runs directly from your CD-ROM and like BartPE it also provides networking and USB flash drive support. If you are new to linux you might find difficult to use at first. However the KDE desktop provides useful shortcuts labeled: hda1 (harddrive) sda1(flash drive when connected)
good luck.
Richard S.
Similar Messages
-
I've been having a memory leak/hanging problem for weeks -- FF slowly increases memory usage until it's at almost 100% and then freezes and I have to shut it down via Task Manager/end process.
Last week I updated to FF 12, and I also added the Web Developer 1.1.9 add-on. Now every time I open Firefox it tries to go to the "Web Developer installed" page, but the page never loads. Nothing else will load either.
I can't start in Safe Mode because of the problem with having to close it in Task Manager. I select "restart with add-ons disabled" and it just never opens. The Add-On manager page won't load, so I can't disable Web Developer to see if that's the problem.
I've uninstalled Firefox and reinstalled, and it still goes right back to the Web Developer page when I open the freshly installed copy.
Help, please!Have you already tried clearing the browser cache, opening a blank tab, and trying to open some other website ?
* [[how to clear the cache]]
Instead of trying to open safe mode from within the User Interface menu have you tried alternative methods such as holding the shift key when you start Firefox. (After checking for running Firefox processes or plugincontainer and killing them if found )
* see [[safe mode]]
* [[firefox hangs]]
If using safemode does not help first of all try creating and using a new profile.
* [[Basic Troubleshooting#w_8-make-a-new-profile]]_8-make-a-new-profile
If all the above fail then try a clean re-install of Firefox
* [[Basic Troubleshooting#w_7-reinstall-firefox]]_7-reinstall-firefox -
Macbook pro 2006 can only start on safe mode and it has a lot of squares on the screen
My macbook pro 2006 can only start on safe mode and it has a lot of squares on the screen even if I use an external display help? heres a picture http://i61.tinypic.com/vebszt.jpg
Mespinal130,
have you tried running your MacBook Pro’s Apple Hardware Test, to see if it can detect anything amiss? -
My MacBook won't start normally and when I try to start in safe mode it gets stuck on a blue screen that alternates between the load wheel and my mouse at the top left corner. Any help?
Sounds like serious system file corruption. Start with:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Assuming this won't fix the problem the next step is to reinstall OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
My Firefox does not open, at all. When I try to open i get the message that says "Firefox is unable to start correctly (0xc0000056)". I have tried to run the Firefox crash report, which also does not run. I'm unable to start in safe mode, also. All I get, is the above message...nothing else.
I'm not using that extension, so I do not know which files are used in addition to sessionstore.js and you need to check the profile folder yourself for suspect files.
This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]<br />
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
See http://kb.mozillazine.org/Session_Restore -
Kernel Panic - can't start in Safe Mode or from OS Install disc
Can anyone help me ?,
Here's what happens :
1. I press the power button to switch on
2. The usual grey screen with the apple logo appears but after a few seconds it is replaced by a darker grey/black screen with a message in the centre saying something like 'you need to restart your computer, press restart or press and hold the power button for a few seconds' in several languages(I believe that this is indicates a Kernel Panic)
3. Powering down as per the instruction just results in the same message appearing when I switch on again......
I've looked at numerous suggested solutions, here and elsewhere - the problem is that they all start with either:
...start your machine in Safe Mode...
Or
...start your machine from the OS disc...
and I have been unable to do either (the same panic screen just reappears each time)
I've also tried starting in Single User Mode and typing mount uw / (step 1 of another suggested solution) - again it simply hangs after returning a few lines of text...
I have a G4 iMac with superdrive and have recently installed OSX 10.4
Any suggestions you can offer would be gratefully received!Hello going:
Welcome to Apple discussions.
One suggestion - if you have third party memory installed, remove it and see if the problem goes away. If it does not and you cannot start from the software install DVD, you will need to take your computer to either an Apple store or to an Apple certified repair facility for diagnosis. Kernel panics may be caused by either hardware or software, but if you cannot start from your install DVD, no further "repair" operations would be possible.
Barry -
T60 Lenovo IBM Thinkpad: Can't start in Safe mode!?
Windows XP SP 2
centrino duo
Lenovo T60 type 2007-46U
I have this virus that will not allow me to open my anti-virus software, Malwarebytes, Windows update, windows security, msconfig or any other tool that might help me out.
It tires to force scanning of some program called "Security System" (looks as if it wants to scan and clean my computer, but my feeling is that it's part of the virus)
I wanted to start my computer in safe mode, but I can't seem to do it.
I've tried spamming F2, F8, F10 each on different startups during the windows loading page but I get nothing!
Any idea how I can get into safe mode on this beast?
Thanks!
Message Edited by bcschers75 on 07-20-2009 11:09 AMI agree. Remember to tap the F11 at boot to access Rescue and Recovery. If you need to reload Windows on your unit, follow the instructions on this page:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70803
You might be able to use Rescue and Recovery to backup your files using the "Rescue Files" section located under the "Rescue and Restore" section. (If you don't see the Menu on the left when R&R first loads, click on the "Launch Advanced Rescue and Recovery" link on the bottom left of the page). Also in Rescue and Recovery, these are 3 options available under "Restore Your System". If that virus is not going away, I'd highly recommend selecting "Restore to the original factory state" and then selecting "I do not want to save any files".
Let me know if this helps.
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks -
What is going on ?!?!? I can't start logic pro in 64-bit mode
I have been struggling with this issue for a while now, but I haven't made any progress. I am unable to start Logic Pro 9 in 64-bit mode. And when I say that, I mean that if I select the Logic Pro app in Finder, and say "Get Info," there is no "Start in 32-bit mode" option like all of the tutorials say to do. It used to show up, and I was able to start in 64-bit mode just fine, but suddenly, the option is not there, and the app is starting in 32-bit mode.
My Mac/OSX have been running so well, that I'm not too knowledgeable about where to even start looking for a solution. I am very comfortable with the Terminal, etc, so I can follow directions well, but I don't know where this problem stems from.
The machine is running in 64-bit mode, ie, if I do uname -a, it does return that the system is running in 64-bit mode. Logic runs just fine outside of not starting in 64-bit mode, but I want/need to be taking advantage of all of the RAM I spent so much money on.
I'm not sure what info would be needed, but here goes:
Mac Pro 3,1 (early 2008), 8-core 2.8Ghz.
10GB RAM
4 SATA HDDs
NVidia Geforce 8800 GT 512MB RAM
OS X Mavericks with all current updates
Logic Pro 9.1.x, again, with all updates available.
Steinberg UR22 audio interface (USB)
Also, I'm not sure if it matters, but I also have Windows 7 installed through Bootcamp, and it is running fine, and recognizes 32-bit/64-bit apps just fine.
I hope that's enough for someone to be able to tell me where to start looking. I really don't get it. This was happening when I first installed Mavericks. I ended up doing a fresh install from USB stick, and everything was going fine. I don't think that an update has changed things, as the last time I opened Logic, it did open in 64-bit mode. Suddenly though, that option is unavailable.
Is there a plist entry I can edit that will force it into 64-bit mode?
What part of the OS is in charge of this type of thing?
Any help is greatly appreciated.Could be corrupted preferences.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic.pro.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro.
Be sure and use the ~ character in the path name. -
How can I start local J2EE Engine in debug mode automatically?
Hello,
I thought there was a way to setup the local J2EE engine to automatically start in debug mode.
Right now, I have to start the engine, go into Studio and right-click on engine and choose "Enable debugging of process". This means that I have to wait for the engine to restart.
What I'm looking for is a system setting where I can tell it to automatically start in debug mode.
Thanks in advance for any help.
David.Ivaylo,
Thanks for the quick reply.
Could you please elaborate on your instructions? I have started the Config Tool. Now I see the following tree structure:
+ cluster-data
secure store
UME LDAP data
I expand the cluster-data node and get this:
- cluster-data
+Global dispatcher configuration
+Global server configuration
+instance_ID12345
Assumed that I should expand the instance node. When I do I get this:
+ dispatcher_ID1234500
+ server_ID123450
Again, I assumed I should expand the server node. This is where I get lost. I have no idea where to go next to set the debug configuration.
Can you please help?
Thanks
David. -
Can't start MacBook from disk, target disk mode, etc.
I'm working on a 2007 MacBook (2.16 processor). It crashed this morning and I can't get it to start from a DiskWarrior media, Drive Genius media, OS 10 install disk, external DVD player or in target disk mode.
I can hear the drive clicking occasionally, so I'm fairly certain it's fried, but why won't the logic board allow an alternate boot? Maybe the crash fried the logic board?
Thanks.It should first ask you to select your language. After you choose your language, click the "Utilities" menu to find Disk Utility.
-
I can't put my xperia go into any mode
This is my first mobile phone, how do you put it into stand by?
Also lost sleep mode on the shut down, how do i get it back?Thanks for your reply, but i find that it is very hard for me to explain myself fully in the written word, i had the wrong title and this as led to confusion.
My problem is that when i press the power button to put into sleep mode, there is no sleep mode in the shut down list.
How do i get it back, already tried Troubleshooting "Have you tried this?", with no luck -
Help: Can't start up in Safe Mode!
I'm trying to fire up in Safe Mode to do a few Spotlight housekeeping tasks but my Mac won't have it. When I try start up Safe it gets no further than the Grey Apple Logo and spinning wheel. After a short while the fans spin up to full speed and nothing else happens. I have to force the Mac to shut down and I can then start up again normally.
Any help on this would be much appreciated as there may come a time when I NEED to start up in Safe Mode.
Thanks in advance. Derek.Hi-
Might want to try a Single User mode boot (command +s) and run fsck.
-Startup in Single User mode.
-At the command-line prompt, type */sbin/fsck -fy*. Press Return.
fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
The volume (nameofvolume) appears to be OK
-If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
FILE SYSTEM WAS MODIFIED
Important: If this message appears, repeat the fsck command again, until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
-When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
-Your computer should start up normally and allow you to log in.
After this, try a Safe mode boot, again.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck -
Mavericks can only boot in safe mode
In can only boot my Imac 27' (end of 2009) in safe mode.
The problem started in Lion, when the computer suddenly froze.
I upgraded (in safe mode) to Mavericks 10.9.2, took away all Launch Agents and Daemon that are not Apple (both in System and User's), done all the permission repairs, reset memory, fsck and turn the plug off the computer. The only thing I was not able to do is the hardware test (for some reason, the command + D to access the internet testing is not working). I have no external devices or cables attached.
My 2TB hard drive is divided in 3 partitions. I have got 2 user accounts.
Even with all this, I can only start in safe mode.
Here is a copy of the log. If anyone can help, I would be grateful !
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
03.05.14 11:48:37.000 kernel[0]: Longterm timer threshold: 1000 ms
03.05.14 11:48:37.000 kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
03.05.14 11:48:37.000 kernel[0]: vm_page_bootstrap: 2015569 free pages and 65199 wired pages
03.05.14 11:48:37.000 kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
03.05.14 11:48:37.000 kernel[0]: zone leak detection enabled
03.05.14 11:48:37.000 kernel[0]: "vm_compressor_mode" is 4
03.05.14 11:48:37.000 kernel[0]: standard timeslicing quantum is 10000 us
03.05.14 11:48:37.000 kernel[0]: standard background quantum is 2500 us
03.05.14 11:48:37.000 kernel[0]: mig_table_max_displ = 74
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Sandbox
03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
03.05.14 11:48:37.000 kernel[0]: calling mpo_policy_init for Quarantine
03.05.14 11:48:37.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
03.05.14 11:48:37.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
03.05.14 11:48:37.000 kernel[0]: The Regents of the University of California. All rights reserved.
03.05.14 11:48:37.000 kernel[0]: MAC Framework successfully initialized
03.05.14 11:48:37.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
03.05.14 11:48:37.000 kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
03.05.14 11:48:37.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
03.05.14 11:48:37.000 kernel[0]: ACPI: sleep states S3 S4 S5
03.05.14 11:48:37.000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
03.05.14 11:48:37.000 kernel[0]: console relocated to 0xf80010000
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration begin ]
03.05.14 11:48:37.000 kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
03.05.14 11:48:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
03.05.14 11:48:37.000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
03.05.14 11:48:37.000 kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
03.05.14 11:48:37.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
03.05.14 11:48:37.000 kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
03.05.14 11:48:37.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
03.05.14 11:48:37.000 kernel[0]: handoff: unsupported os...
03.05.14 11:48:37.000 kernel[0]: handoff: symbol mismatch...
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
03.05.14 11:48:37.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
03.05.14 11:48:37.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
03.05.14 11:48:37.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
03.05.14 11:48:37.000 kernel[0]: BSD root: disk0s2, major 1, minor 1
03.05.14 11:48:37.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
03.05.14 11:48:37.000 kernel[0]: hfs: mounted Macintosh HD on device root_device
03.05.14 11:48:37.000 kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
03.05.14 11:48:37.000 kernel[0]: 2.296383: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
03.05.14 11:48:37.000 kernel[0]: 2.300580: Atheros: mac 128.2 phy 13.0 radio 12.0
03.05.14 11:48:37.000 kernel[0]: 2.300590: Use hw queue 0 for WME_AC_BE traffic
03.05.14 11:48:37.000 kernel[0]: 2.300596: Use hw queue 1 for WME_AC_BK traffic
03.05.14 11:48:37.000 kernel[0]: 2.300603: Use hw queue 2 for WME_AC_VI traffic
03.05.14 11:48:37.000 kernel[0]: 2.300609: Use hw queue 3 for WME_AC_VO traffic
03.05.14 11:48:37.000 kernel[0]: 2.300615: Use hw queue 8 for CAB traffic
03.05.14 11:48:37.000 kernel[0]: 2.300620: Use hw queue 9 for beacons
03.05.14 11:48:37.000 kernel[0]: 2.300700: wlan_vap_create : enter. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1
03.05.14 11:48:37.000 kernel[0]: 2.300743: wlan_vap_create : exit. devhandle=0xd4f8c6b0, opmode=IEEE80211_M_STA, flags=0x1.
03.05.14 11:48:37.000 kernel[0]: 2.300778: ATH tunables:
03.05.14 11:48:37.000 kernel[0]: 2.300782: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
03.05.14 11:48:37.000 kernel[0]: VM Swap Subsystem is ON
03.05.14 11:48:37.000 kernel[0]: Waiting for DSMOS...
03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe
03.05.14 11:48:37.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
03.05.14 11:48:37.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
03.05.14 11:48:10.829 com.apple.launchd[1]: *** launchd[1] has started up. ***
03.05.14 11:48:10.830 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
03.05.14 11:48:37.000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
03.05.14 11:48:37.000 kernel[0]: init
03.05.14 11:48:37.000 kernel[0]: probe
03.05.14 11:48:37.000 kernel[0]: start
03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
03.05.14 11:48:37.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
03.05.14 11:48:37.000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
03.05.14 11:48:37.000 kernel[0]: ** Device in slot: SLOT--1 **
03.05.14 11:48:37.000 kernel[0]: Previous Shutdown Cause: 3
03.05.14 11:48:37.000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
03.05.14 11:48:37.000 kernel[0]: DSMOS has arrived
03.05.14 11:48:37.609 distnoted[66]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
03.05.14 11:48:36.114 hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
03.05.14 11:48:36.115 fseventsd[46]: event logs in /.fseventsd out of sync with volume. destroying old logs. (502 27 1097)
03.05.14 11:48:36.115 fseventsd[46]: log dir: /.fseventsd getting new uuid: 4CB3C308-0B39-4855-BD13-3F533C4457B9
03.05.14 11:48:36.117 hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
03.05.14 11:48:36.416 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
03.05.14 11:48:36.633 kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
03.05.14 11:48:37.611 com.apple.launchd[1]: (com.apple.Kerberos.kdc[42]) Exited with code: 1
03.05.14 11:48:37.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
03.05.14 11:48:37.000 kernel[0]: IO80211Interface::efiNVRAMPublished():
03.05.14 11:48:37.642 kdc[78]: label: default
03.05.14 11:48:37.642 kdc[78]: dbname: od:/Local/Default
03.05.14 11:48:37.642 kdc[78]: mkey_file: /var/db/krb5kdc/m-key
03.05.14 11:48:37.642 kdc[78]: acl_file: /var/db/krb5kdc/kadmind.acl
03.05.14 11:48:38.242 com.apple.SecurityServer[24]: Session 100000 created
03.05.14 11:48:38.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
03.05.14 11:48:38.000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1a40 -- 0xe000 -- 0xb400 ****
03.05.14 11:48:39.540 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:48:42.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
03.05.14 11:48:42.130 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:48:43.069 configd[56]: dhcp_arp_router: en1 SSID unavailable
03.05.14 11:48:43.078 configd[56]: setting hostname to "Macs-iMac-3.local"
03.05.14 11:48:43.092 configd[56]: network changed.
03.05.14 11:48:43.095 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:48:43.095 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:48:43.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
03.05.14 11:48:43.492 mds[34]: (Normal) FMW: FMW 0 0
03.05.14 11:48:44.000 kernel[0]: hfs: mounted Video on device disk0s4
03.05.14 11:48:45.000 kernel[0]: hfs: mounted Musicas on device disk0s5
03.05.14 11:48:46.690 com.apple.SecurityServer[24]: Entering service
03.05.14 11:48:46.783 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
03.05.14 11:48:46.813 digest-service[67]: label: default
03.05.14 11:48:46.813 digest-service[67]: dbname: od:/Local/Default
03.05.14 11:48:46.813 digest-service[67]: mkey_file: /var/db/krb5kdc/m-key
03.05.14 11:48:46.814 digest-service[67]: acl_file: /var/db/krb5kdc/kadmind.acl
03.05.14 11:48:46.816 digest-service[67]: digest-request: uid=0
03.05.14 11:48:46.833 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
03.05.14 11:48:46.835 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
03.05.14 11:48:46.870 digest-service[67]: digest-request: netr probe 0
03.05.14 11:48:46.871 digest-service[67]: digest-request: init request
03.05.14 11:48:46.879 digest-service[67]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
03.05.14 11:48:46.913 awacsd[59]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
03.05.14 11:48:46.919 awacsd[59]: InnerStore CopyAllZones: no info in Dynamic Store
03.05.14 11:48:47.229 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
03.05.14 11:48:47.243 locationd[40]: Location icon should now be in state 'Inactive'
03.05.14 11:48:47.243 locationd[40]: locationd was started after an unclean shutdown
03.05.14 11:48:47.401 airportd[63]: airportdProcessDLILEvent: en1 attached (up)
03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
03.05.14 11:48:47.000 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
03.05.14 11:48:47.404 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:48:47.404 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:48:47.000 kernel[0]: 38.870836: performCountryCodeOperation: Not connected, scan in progress[0]
03.05.14 11:48:47.000 kernel[0]: 38.871785: setWOW_PARAMETERS:wowevents = 2(1)
03.05.14 11:48:47.470 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
03.05.14 11:48:47.532 loginwindow[38]: Login Window Application Started
03.05.14 11:48:47.000 kernel[0]: en1: 802.11d country code set to 'US '.
03.05.14 11:48:47.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
03.05.14 11:48:47.589 sandboxd[113]: ([63]) airportd(63) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
03.05.14 11:48:48.103 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:48.167 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:48.530 networkd[118]: networkd.118 built Aug 24 2013 22:08:46
03.05.14 11:48:49.138 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:49.178 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:50.136 WindowServer[115]: Server is starting up
03.05.14 11:48:50.229 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:50.262 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:50.542 systemkeychain[102]: done file: /var/run/systemkeychaincheck.done
03.05.14 11:48:50.554 configd[56]: network changed: DNS*
03.05.14 11:48:50.556 configd[56]: network changed: DNS*
03.05.14 11:48:50.557 mDNSResponder[35]: D2D_IPC: Loaded
03.05.14 11:48:50.557 mDNSResponder[35]: D2DInitialize succeeded
03.05.14 11:48:50.561 mDNSResponder[35]: 4: Listening for incoming Unix Domain Socket client requests
03.05.14 11:48:50.561 mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB802360 Macs-iMac-3.local. (Addr) that's already in the list
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AB8027F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81BD60 Macs-iMac-3.local. (AAAA) that's already in the list
03.05.14 11:48:50.568 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FC9AA81C1F0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
03.05.14 11:48:51.199 kdc[78]: KDC started
03.05.14 11:48:51.321 aosnotifyd[62]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:51.362 mdmclient[36]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
03.05.14 11:48:51.520 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
03.05.14 11:48:51.571 awacsd[59]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
03.05.14 11:48:52.000 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
03.05.14 11:48:52.603 fseventsd[46]: event logs in /Volumes/Video/.fseventsd out of sync with volume. destroying old logs. (157 8 1095)
03.05.14 11:48:52.000 kernel[0]: [AppleMultitouchDevice::start] entered
03.05.14 11:48:53.586 fseventsd[46]: log dir: /Volumes/Video/.fseventsd getting new uuid: DF46AA4B-9528-407F-AD85-EAC421E431C3
03.05.14 11:48:54.638 awacsd[59]: KV HTTP 0
03.05.14 11:48:54.655 fseventsd[46]: event logs in /Volumes/Musicas/.fseventsd out of sync with volume. destroying old logs. (155 10 1095)
03.05.14 11:48:55.000 kernel[0]: hfs: mounted Recovery HD on device disk0s3
03.05.14 11:48:55.424 mds[34]: (Normal) Volume: volume:0x7f8813845200 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
03.05.14 11:48:56.202 fseventsd[46]: log dir: /Volumes/Musicas/.fseventsd getting new uuid: DBDC9085-505D-4A24-8508-5C15EBF36DFA
03.05.14 11:48:57.243 WindowServer[115]: Session 256 retained (2 references)
03.05.14 11:48:57.243 WindowServer[115]: Session 256 released (1 references)
03.05.14 11:48:57.280 WindowServer[115]: Session 256 retained (2 references)
03.05.14 11:48:57.282 WindowServer[115]: init_page_flip: page flip mode is on
03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
03.05.14 11:48:57.000 kernel[0]: AirPort: Link Up on en1
03.05.14 11:48:57.000 kernel[0]: 48.780691: apple80211Request[10514] Unsupported ioctl 181
03.05.14 11:48:57.000 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
03.05.14 11:48:57.000 kernel[0]: AirPort: RSN handshake complete on en1
03.05.14 11:48:57.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
03.05.14 11:48:57.927 fseventsd[46]: Logging disabled completely for device:1: /Volumes/Recovery HD
03.05.14 11:48:57.000 kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
03.05.14 11:48:58.530 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
03.05.14 11:48:58.533 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
03.05.14 11:48:58.534 WindowServer[115]: mux_initialize: Couldn't find any matches
03.05.14 11:48:58.535 WindowServer[115]: Found 39 modes for display 0x00000000 [36, 3]
03.05.14 11:48:58.538 WindowServer[115]: Found 1 modes for display 0x00000000 [1, 0]
03.05.14 11:48:59.640 awacsd[59]: KV HTTP 0
03.05.14 11:49:00.487 configd[56]: network changed: DNS* Proxy
03.05.14 11:49:00.487 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
03.05.14 11:49:00.488 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
03.05.14 11:49:00.489 UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
03.05.14 11:49:00.493 configd[56]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
03.05.14 11:49:02.569 ntpd[135]: proto: precision = 1.000 usec
03.05.14 11:49:02.673 racoon[157]: accepted connection on vpn control socket.
03.05.14 11:49:02.811 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
03.05.14 11:49:03.100 apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
03.05.14 11:49:04.537 apsd[61]: Unrecognized leaf certificate
03.05.14 11:49:14.000 kernel[0]: utun_ctl_connect: creating interface utun0
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
03.05.14 11:49:14.375 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
03.05.14 11:49:14.376 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
03.05.14 11:49:14.377 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500] (Can't assign requested address).
03.05.14 11:49:14.378 configd[56]: en0: DHCP duplicate configured service
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.378 configd[56]: en0: AUTOMATIC-V6 duplicate configured service
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500] (Can't assign requested address).
03.05.14 11:49:14.378 racoon[157]: failed to bind to address fd20:c40d:6b6d:9361:945f:9bfc:6bcb:cf76[4500]: because interface address is/was not ready (flags 2).
03.05.14 11:49:14.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
03.05.14 11:49:20.396 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
03.05.14 11:49:23.596 mDNSResponder[35]: ERROR: socket closed prematurely tcpInfo->nread = 0
03.05.14 11:50:16.742 warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
03.05.14 11:50:16.743 warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
03.05.14 11:50:51.617 apsd[61]: Failed to send activation record to service com.apple.ManagedClient.enroll
03.05.14 11:51:07.187 distnoted[172]: # distnote server agent absolute time: 177.064182367 civil time: Sat May 3 11:51:07 2014 pid: 172 uid: 502 root: no
03.05.14 11:51:24.977 mdworker[177]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12997 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802
03.05.14 11:51:25.032 com.apple.SecurityServer[24]: Session 100003 created
03.05.14 11:51:25.033 com.apple.SecurityServer[24]: Session 100005 created
03.05.14 11:51:38.595 mdworker[184]: (Warning) Import: import uti:com.adobe.pdf plugin:/Library/Spotlight/PDF.mdimporter uuid:7D48EF77-69AB-47DB-BBD9-D907F89C3C17 61 exceeded cpu use limits (12) after 12980 milliseconds sizing:0 - find suspect file using: sudo mdutil -t 842802I have tried a few other tricks from the experts in the discussion boards (including removing all preference files that are non apple, remove all non apple extensions), still no way to start up the computer other than safe boot.
I would like to try and turn off bonjour, as it seems like a MDNSResponder Error. But need a green light from any of you experts.
I am posting the latest system log (on this one, I forgot to unplug the printer)
Please help !!!
May 4 20:38:05 localhost bootlog[0]: BOOT_TIME 1399246685 0
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:44 localhost syslogd[19]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
May 4 20:38:45 --- last message repeated 6 times ---
May 4 20:38:44 localhost kernel[0]: Longterm timer threshold: 1000 ms
May 4 20:38:44 localhost kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr 2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
May 4 20:38:44 localhost kernel[0]: vm_page_bootstrap: 2008481 free pages and 72287 wired pages
May 4 20:38:44 localhost kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
May 4 20:38:44 localhost kernel[0]: zone leak detection enabled
May 4 20:38:44 localhost kernel[0]: "vm_compressor_mode" is 4
May 4 20:38:44 localhost kernel[0]: standard timeslicing quantum is 10000 us
May 4 20:38:44 localhost kernel[0]: standard background quantum is 2500 us
May 4 20:38:44 localhost kernel[0]: mig_table_max_displ = 74
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled
May 4 20:38:44 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
May 4 20:38:44 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
May 4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Sandbox
May 4 20:38:44 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
May 4 20:38:44 localhost kernel[0]: calling mpo_policy_init for Quarantine
May 4 20:38:44 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
May 4 20:38:44 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
May 4 20:38:44 localhost kernel[0]: The Regents of the University of California. All rights reserved.
May 4 20:38:44 localhost kernel[0]: MAC Framework successfully initialized
May 4 20:38:44 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
May 4 20:38:44 localhost kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)
May 4 20:38:44 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
May 4 20:38:44 localhost kernel[0]: ACPI: sleep states S3 S4 S5
May 4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144
May 4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
May 4 20:38:44 localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
May 4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
May 4 20:38:44 localhost kernel[0]: console relocated to 0xf80010000
May 4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 9, devices 21 ]
May 4 20:38:44 localhost kernel[0]: [ PCI configuration begin ]
May 4 20:38:44 localhost kernel[0]: [ PCI configuration end, bridges 10, devices 36 ]
May 4 20:38:44 localhost kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
May 4 20:38:44 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
May 4 20:38:44 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
May 4 20:38:44 localhost kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 40d32dfffe04245e; max speed s800.
May 4 20:38:44 localhost kernel[0]: rooting via boot-uuid from /chosen: 48B4343E-ADD2-366E-8820-219D2141D0B7
May 4 20:38:44 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
May 4 20:38:44 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
May 4 20:38:44 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
May 4 20:38:44 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HDS722020ALA330 Media/IOGUIDPartitionScheme/Macintosh HD@2
May 4 20:38:44 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
May 4 20:38:44 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2
May 4 20:38:44 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
May 4 20:38:44 localhost kernel[0]: USBF: 1.518 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0
May 4 20:38:44 localhost kernel[0]: 2.257313: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0
May 4 20:38:44 localhost kernel[0]: 2.261494: Atheros: mac 128.2 phy 13.0 radio 12.0
May 4 20:38:44 localhost kernel[0]: 2.261504: Use hw queue 0 for WME_AC_BE traffic
May 4 20:38:44 localhost kernel[0]: 2.261510: Use hw queue 1 for WME_AC_BK traffic
May 4 20:38:44 localhost kernel[0]: 2.261516: Use hw queue 2 for WME_AC_VI traffic
May 4 20:38:44 localhost kernel[0]: 2.261522: Use hw queue 3 for WME_AC_VO traffic
May 4 20:38:44 localhost kernel[0]: 2.261529: Use hw queue 8 for CAB traffic
May 4 20:38:44 localhost kernel[0]: 2.261534: Use hw queue 9 for beacons
May 4 20:38:44 localhost kernel[0]: 2.261612: wlan_vap_create : enter. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1
May 4 20:38:44 localhost kernel[0]: 2.261651: wlan_vap_create : exit. devhandle=0xd6b8f6b0, opmode=IEEE80211_M_STA, flags=0x1.
May 4 20:38:44 localhost kernel[0]: 2.261688: ATH tunables:
May 4 20:38:44 localhost kernel[0]: 2.261691: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
May 4 20:38:44 localhost kernel[0]: USBF: 4.521 The IOUSBFamily was not able to enumerate a device.
May 4 20:38:44 localhost kernel[0]: USBF: 5.362 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: USBF: 8.760 The IOUSBFamily was not able to enumerate a device.
May 4 20:38:44 localhost kernel[0]: USBF: 9.587 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: USBF: 10.418 The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 3 of Hub at 0xfd140000)
May 4 20:38:44 localhost kernel[0]: USBF: 10.418 The IOUSBFamily was not able to enumerate a device.
May 4 20:38:44 localhost kernel[0]: process taskgated[13] caught causing excessive wakeups. Observed wakeups rate (per sec): 1596; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45036
May 4 20:38:44 localhost kernel[0]: VM Swap Subsystem is ON
May 4 20:38:06 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
May 4 20:38:06 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
May 4 20:38:32 localhost hidd[44]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
May 4 20:38:36 localhost hidd[44]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
May 4 20:38:44 localhost com.apple.SecurityServer[25]: Session 100000 created
May 4 20:38:45 localhost distnoted[65]: # distnote server daemon absolute time: 28.917725827 civil time: Sun May 4 20:38:33 2014 pid: 65 uid: 0 root: yes
May 4 20:38:46 localhost revisiond[27]: sandbox cache error 3850
May 4 20:38:46 localhost blued[57]: sandbox cache error 11: database disk image is malformed
May 4 20:38:46 localhost ReportCrash[71]: Invoking spindump for pid=13 wakeups_rate=1596 duration=29 because of excessive wakeups
May 4 20:38:47 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
May 4 20:38:47 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
May 4 20:38:47 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:38:47 localhost spindump[73]: Unable to register Stop Spinning port: 1011
May 4 20:38:47 localhost kernel[0]: Waiting for DSMOS...
May 4 20:38:48 localhost spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:38:48 localhost kdc[42]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
May 4 20:38:48 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc[42]): Exited with code: 1
May 4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe
May 4 20:38:49 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0207
May 4 20:38:49 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xec00 ****
May 4 20:38:49 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xec00 ****
May 4 20:38:49 localhost kernel[0]: init
May 4 20:38:49 localhost kernel[0]: probe
May 4 20:38:49 localhost kernel[0]: start
May 4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xec00
May 4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
May 4 20:38:49 localhost kernel[0]: ** Device in slot: SLOT--1 **
May 4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
May 4 20:38:49 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
May 4 20:38:49 localhost kernel[0]: Previous Shutdown Cause: 3
May 4 20:38:49 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
May 4 20:38:49 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
May 4 20:38:49 localhost kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1240 -- 0x7800 -- 0xec00 ****
May 4 20:38:49 localhost kernel[0]: DSMOS has arrived
May 4 20:38:50 localhost com.apple.SecurityServer[25]: Entering service
May 4 20:38:51 localhost kdc[79]: label: default
May 4 20:38:51 localhost kdc[79]: dbname: od:/Local/Default
May 4 20:38:51 localhost kdc[79]: mkey_file: /var/db/krb5kdc/m-key
May 4 20:38:51 localhost kdc[79]: acl_file: /var/db/krb5kdc/kadmind.acl
May 4 20:38:52 localhost digest-service[66]: label: default
May 4 20:38:52 localhost digest-service[66]: dbname: od:/Local/Default
May 4 20:38:52 localhost digest-service[66]: mkey_file: /var/db/krb5kdc/m-key
May 4 20:38:52 localhost digest-service[66]: acl_file: /var/db/krb5kdc/kadmind.acl
May 4 20:38:52 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
May 4 20:38:52 localhost configd[55]: dhcp_arp_router: en1 SSID unavailable
May 4 20:38:52 localhost configd[55]: network changed.
May 4 20:38:53 Macs-iMac-3.local configd[55]: setting hostname to "Macs-iMac-3.local"
May 4 20:38:53 Macs-iMac-3.local digest-service[66]: digest-request: uid=0
May 4 20:38:53 Macs-iMac-3.local com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
May 4 20:38:53 Macs-iMac-3.local mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
May 4 20:38:55 Macs-iMac-3 kernel[0]: hfs: mounted Video on device disk0s4
May 4 20:38:56 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:38:56 Macs-iMac-3.local aosnotifyd[61]: aosnotifyd has been launched
May 4 20:38:57 Macs-iMac-3.local systemkeychain[94]: done file: /var/run/systemkeychaincheck.done
May 4 20:38:57 Macs-iMac-3 kernel[0]: hfs: mounted Musicas on device disk0s5
May 4 20:38:58 Macs-iMac-3.local configd[55]: network changed: DNS*
May 4 20:38:58 --- last message repeated 1 time ---
May 4 20:38:58 Macs-iMac-3.local stackshot[21]: Timed out waiting for IOKit to finish matching.
May 4 20:38:58 Macs-iMac-3.local awacsd[58]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
May 4 20:38:59 Macs-iMac-3.local airportd[62]: airportdProcessDLILEvent: en1 attached (up)
May 4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1
May 4 20:38:59 Macs-iMac-3 kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
May 4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: netr probe 0
May 4 20:38:59 Macs-iMac-3.local digest-service[66]: digest-request: init request
May 4 20:39:00 Macs-iMac-3.local digest-service[66]: digest-request: init return domain: BUILTIN server: MACS-IMAC-3 indomain was: <NULL>
May 4 20:39:00 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
May 4 20:39:01 Macs-iMac-3.local loginwindow[38]: Login Window Application Started
May 4 20:39:01 Macs-iMac-3.local UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2D_IPC: Loaded
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: D2DInitialize succeeded
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: 4: Listening for incoming Unix Domain Socket client requests
May 4 20:39:02 Macs-iMac-3.local mDNSResponder[35]: Adding registration domain 156425616.members.btmm.icloud.com.
May 4 20:39:02 Macs-iMac-3.local kdc[79]: KDC started
May 4 20:39:02 Macs-iMac-3.local awacsd[58]: Configuring lazy AWACS client: 156425616.p07.members.btmm.icloud.com.
May 4 20:39:03 Macs-iMac-3.local networkd[124]: networkd.124 built Aug 24 2013 22:08:46
May 4 20:39:03 Macs-iMac-3.local awacsd[58]: KV HTTP 0
May 4 20:39:06 Macs-iMac-3.local apsd[60]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:39:08 Macs-iMac-3.local mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
May 4 20:39:09 Macs-iMac-3.local awacsd[58]: KV HTTP 0
May 4 20:39:09 Macs-iMac-3.local spindump[73]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 4 20:39:10 Macs-iMac-3.local sandboxd[116] ([62]): airportd(62) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.506705CD-8AA9-5 340-BEA4-87BBB2A2E261.plist
May 4 20:39:11 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
May 4 20:39:11 Macs-iMac-3.local blued[57]: hostControllerOnline - Number of Paired devices = 5, List of Paired devices = (
"00-22-41-ce-73-b2",
"7c-d1-c3-bc-ed-9b",
"04-f1-3e-e9-76-f5",
"d4-88-90-f0-2d-96",
"90-27-e4-f2-fd-53"
May 4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 04-f1-3e-e9-76-f5
May 4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 04-f1-3e-e9-76-f5
May 4 20:39:12 Macs-iMac-3.local blued[57]: link key found for device: 7c-d1-c3-bc-ed-9b
May 4 20:39:12 Macs-iMac-3.local blued[57]: Save link key for device: 7c-d1-c3-bc-ed-9b
May 4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::init][80.14] init is complete
May 4 20:39:13 Macs-iMac-3 kernel[0]: [BNBMouseDevice::handleStart][80.14] returning 1
May 4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
May 4 20:39:13 Macs-iMac-3 kernel[0]: [AppleMultitouchDevice::start] entered
May 4 20:39:14 Macs-iMac-3.local blued[57]: [setFeatureWithReportID] Could not set report
May 4 20:39:19 Macs-iMac-3.local awacsd[58]: KV HTTP 0
May 4 20:39:21 Macs-iMac-3 kernel[0]: 76.792776: setWOW_PARAMETERS:wowevents = 2(1)
May 4 20:39:21 Macs-iMac-3.local WindowServer[118]: Server is starting up
May 4 20:39:22 Macs-iMac-3 kernel[0]: 77.481213: performCountryCodeOperation: Not connected, scan in progress[0]
May 4 20:39:22 Macs-iMac-3.local locationd[40]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
May 4 20:39:22 Macs-iMac-3.local locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
May 4 20:39:22 Macs-iMac-3 kernel[0]: en1: 802.11d country code set to 'US '.
May 4 20:39:22 Macs-iMac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
May 4 20:39:22 Macs-iMac-3.local mds[34]: (Normal) FMW: FMW 0 0
May 4 20:39:23 Macs-iMac-3.local locationd[40]: Location icon should now be in state 'Inactive'
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01AD60 Macs-iMac-3.local. (Addr) that's already in the list
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FA01B1F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801B60 Macs-iMac-3.local. (AAAA) that's already in the list
May 4 20:39:24 Macs-iMac-3.local mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FE4FB801FF0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
May 4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
May 4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: Link Up on en1
May 4 20:39:27 Macs-iMac-3 kernel[0]: 83.354881: apple80211Request[10514] Unsupported ioctl 181
May 4 20:39:27 Macs-iMac-3 kernel[0]: en1: BSSID changed to 10:9a:dd:82:5b:36
May 4 20:39:27 Macs-iMac-3 kernel[0]: AirPort: RSN handshake complete on en1
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 released (1 references)
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: Session 256 retained (2 references)
May 4 20:39:28 Macs-iMac-3.local WindowServer[118]: init_page_flip: page flip mode is on
May 4 20:39:28 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: mux_initialize: Couldn't find any matches
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 39 modes for display 0x00000000 [36, 3]
May 4 20:39:29 Macs-iMac-3.local WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]
May 4 20:39:30 Macs-iMac-3.local configd[55]: network changed: DNS* Proxy
May 4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Apple Network 825b35' making interface primary (protected network)
May 4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
May 4 20:39:30 Macs-iMac-3.local UserEventAgent[11]: Captive: en1: Probing 'Apple Network 825b35'
May 4 20:39:30 Macs-iMac-3.local configd[55]: network changed: v4(en1!:10.0.1.5) DNS+ Proxy+ SMB
May 4 20:39:31 Macs-iMac-3.local racoon[146]: accepted connection on vpn control socket.
May 4 20:39:32 Macs-iMac-3.local ntpd[132]: proto: precision = 1.000 usec
May 4 20:39:32 Macs-iMac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
May 4 20:39:33 Macs-iMac-3.local apsd[60]: Unrecognized leaf certificate
May 4 20:39:35 Macs-iMac-3.local mds_stores[129]: (/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T)(Error) IndexCI in void _indexEmergencyUnmap(void *):live.1. marking invalid
May 4 20:39:43 --- last message repeated 1 time ---
May 4 20:39:43 Macs-iMac-3 kernel[0]: utun_ctl_connect: creating interface utun0
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500] (Can't assign requested address).
May 4 20:39:43 Macs-iMac-3.local racoon[146]: failed to bind to address fd20:c40d:6b6d:9361:80a:aacb:6d80:2d86[4500]: because interface address is/was not ready (flags 2).
May 4 20:39:43 Macs-iMac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
May 4 20:40:25 Macs-iMac-3.local warmd[16]: [warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
May 4 20:40:25 Macs-iMac-3.local warmd[16]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke:2329] Unable to open i386 shared cache: 2 No such file or directory
May 4 20:40:31 Macs-iMac-3 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
May 4 20:40:42 Macs-iMac-3.local com.apple.kextcache[154]: kext com.jmicron.JMicronATA 101069000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASRAID 307029000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA3 100059000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressSASHBA 200009000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOExpressPCIUl4 404029000 is in exception list, allowing to load
May 4 20:40:49 Macs-iMac-3.local com.apple.kextcache[154]: kext com.ATTO.driver.ATTOCelerityFC 304089000 is in exception list, allowing to load
May 4 20:40:55 Macs-iMac-3.local com.apple.kextcache[154]: kext com.Accusys.driver.Acxxx 300029000 is in exception list, allowing to load
May 4 20:41:16 Macs-iMac-3.local com.apple.kextcache[154]: Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
May 4 20:42:17 Macs-iMac-3.local distnoted[161]: # distnote server agent absolute time: 252.755084619 civil time: Sun May 4 20:42:17 2014 pid: 161 uid: 502 root: no
May 4 20:42:18 Macs-iMac-3.local mdworker[157]: sandbox cache error 3850
May 4 20:42:37 Macs-iMac-3.local distnoted[169]: # distnote server agent absolute time: 272.385323107 civil time: Sun May 4 20:42:37 2014 pid: 169 uid: 89 root: no
May 4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100005 created
May 4 20:42:38 Macs-iMac-3.local com.apple.SecurityServer[25]: Session 100004 created
May 4 20:42:50 Macs-iMac-3.local mds[34]: (Normal) Volume: volume:0x7faf09848800 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.vXiC4Y
May 4 20:45:38 localhost bootlog[0]: BOOT_TIME 1399247138 0 -
Satellite A105-S4211 can be launched at safe mode only
Hello,
I am a newer, and need help!
I have Toshiba Satellite A105-S4211 laptop. My kid used it for a year, and told me the Window XP operating system could not be normally launched up. I tested it. This laptop only can be started at safe mode. I used following method try to fix it. but it still works at safe mode only:
1. Replaced memory.
2. Replaced hard drive.
3. format hard drive, and reinstall Toshiba recovery disk--> could not install completed, fail at latest step.
4. format hard drive, and install Window XP professional SP2 --> fail at latest step also.
5. lauched at safe mode, and use command chkdsk to check disk. finsihed checked disk and ask me to use command "chkdsk /f" at next start up because some file is used. I reply "Yes", and restart laptop, it still going to safe mode.
6. One of my friend told me this maybe the video card of this laptop is out of work because it only works at low resolution. I have no idea.
7. I read some error messages at the process of launch. such as error at address 0x00000005. but I don't know how to fix it.
Some one told I should replace a new mother board. I bought this laptop at the fall of 2006, but my kid used only one year. it has not been used because this trouble. Is it the reasonable idea to buy new motherboard?
thanks!
MikeThanks for any response advance!
I tested this lapton again as following:
1. Boot from orininal recovery disc, erase and partition hard drive
2. continue to boot from recovery disc, select option of recovery of factory default software
3 finish the process to create CRC, and screen show the recovery completed
4. Screen shows " Apply final configuration (Don't interrupt)
5, Window Xp show to shut down, and restart laptop, the normal desktop screen is shown
6. pop up window indicates "load personal setting"
laptop repeatly step 4 to 6 two to three times, then I had couple different results:
a. laptop still power on, screen does not show any image, black, but it is different to the "black" without power.
b. a small window indicates: This system is not fully install, please run setup again"
If I manually shut down this laptop, and make cold power up:
a. stay at Window XP initial image, can not go to next
b. laptop show blue screen for one second (looks to make disk check), go to option to select safe mode or normal mode
c. go to Window guiding setup, I finished the Windows XP set up step by step, laptop freeze
The trouble begins at the step of "Apply final configuration".
Do I need to order the disc of Recovery and Application/Drivers, Satellite A100/A105 Series"?
Any suggestion? thanks!
Mike -
Firefox used to work fine, then a few days ago it just stopped. When I try to start it, it comes up with a message that "firefox has stopped working". That message comes up over the box that asks if I want to start in safe mode or reset firefox. when i try to close or cancel that message so I can try starting in safe mode, both sets of messages go away.
if I try to start in safe mode using the shift key, the same thing occurs. The same thing occurred after I uninstalled and reinstalled.Do a clean reinstall and delete the Firefox program before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Maybe you are looking for
-
Screen Goes Blank, Hard Drive Stuck, Cannot Re-Install, or recover
I have somewhat a bizzar problem that even with several years of IT experience I seam not to be able to figure it out. I thought I toss it our here at Toshiba community in hopes of people's collective experience shedding some lights on my problem. I
-
Hi! I have Microsoft Hyper-V Server 2012 R2 with 16 Gb RAM. I created two VM with 7162 Mb of fixed memory on each. But i can't start both of them. When i tried start second vm i got out of memory error. Why? PS C:\Users\Administrator> ( Get-WMIObject
-
Hi there, Really stuck with something...my firefox won't open most links when i click on them. It seems to be more of a problem with the links that are represented by graphics, i.e. a button that says "browse" when going to upload photos. Sometimes i
-
Color Settings Changed when Baby pounded on keyboard
My entire desktop and windows have been changed to a weird flourescent combination of colors. My baby son pounded on the keys and suddenly the colors changed in every application window and picture. Everywhere. I can't figure out how to change the se
-
NetBeans 4.1, JWSDP 1.6, Tomcat 5.0-JWSDP
Hello, I installed JWSDP 1.6 and Tomcat 5.0-JWSDP. Then with Netbeans 4.1 created Web application with very simple WebService (by NB "wizard", name of WS was ChristmasService) and after small patch I built war succesfully. (There is needed to specify