Can't start infrastructure ADMN-906025
I reset the OracleAS 9.0.2 password using emctl set password <newpassword>. I did a dcmctl resyncInstance <myinstance>. Now when I try to start the infrastructure it fails on dcmctl start -ct ohs, reporting ADMN-906025. I used dcmctl getError ADMN-906025 to get the error message below, but that does not help.
ADMN-906025
The exception, 806212, occurred at Oracle9iAS instance "infra.<myhost.mydomain>"
"The opmn request has failed. From opmn: HTTP/1.1 204 No Content
Content-Length: 0
Content-Type: text/html
Response: 0 of 1 processes started.
Check opmn log files such as ipm.log and ons.log for detailed.".
Resolve the indicated problem at the Oracle9iAS instance where it occurred then resync the instance
I looked at the two logs and can find no errors.
Hi Donald,
in theory the emctl set password should have had no impact on the dcm shell not working.
The error you state I have seen before when there has been a failure in one of the underlying components. i.e. the OID or Database.
In 9.0.2 it is very important to start the various services in the correct order due to the dependency chain.
My advice would be to shutdown the database cleanly, i.e. shutdown immediate. Then stop/kill all the other oracle processes. I am assuming this will not impact users.
Now start the procs in the following order:
Start the database
sqlplus sys as sysdba
startup
Start the database listener
lsnrctl start
Start the oid bits and pieces
oidmon start
oidctl connect=iasdb server=OIDLDAPD instance=1 flags='port=4032' start
Use dcmctl to restart the middle tier
$ORACLE_HOME/dcmctl shell
>start
>getState -v
Start webcache (OPTIONAL)
Set the ORACLE_HOME to the ORACLE_HOME containing the webcache executable
$ORACLE_HOME/bin/webcachectl start
If you want the emd running (OPTIONAL):
emctl start
See if that recifies the issue.
cheers
Nick
Similar Messages
-
ADMN-906025 error when I started HTTP server
After all patchs:
dcmctl start -ct ohs
Starting Oracle HTTP Server: name = JDBC type = null
name = OracleConnectionCacheImpl type = JDBC_ConnectionSource
name = JDBC type = null
name = OracleConnectionPoolDataSource type = JDBC_DataSource
name = CONNECTION_1 type = JDBC_Connection
name = JDBC type = null
name = OracleConnectionPoolDataSource type = JDBC_DataSource
name = CONNECTION_2 type = JDBC_Connection
ADMN-906025
dcm/logs/dcmctl_logs/.dcmEx :
The opmn request has failed. From opmn: HTTP/1.1 204 No Content
Content-Length: 0
Content-Type: text/html
Response: 0 of 1 processes started.
Check opmn log files such as ipm.log and ons.log for detailed.t
my.site.comxpq ~ t
roracle.ias.sysmgmt.exception.DcmCmdLineException: Remote Execute Exception 806212
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkStatus(DcmCmdLine.java:1207)
opmn\logs\ipm.log : clear
opmn\logs\ons.log : clear
opmn\logs\HTTP Server.1 :
Warning: setuid to root failed, en = 1
perhaps root.sh was not run? Continuing as current user
/usr/home/ias/OraHome1/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 6 of /usr/home/ias/OraHome1/Apache/Apache/conf/mod_osso.conf:
Unable to deobfuscate the SSO server config file, /usr/home/ias/OraHome1/Apache/Apache/conf/osso/osso.conf, error Bad padding pattern detected in the last block.
What can i do ?
OlegAfter all patchs:
dcmctl start -ct ohs
Starting Oracle HTTP Server: name = JDBC type = null
name = OracleConnectionCacheImpl type = JDBC_ConnectionSource
name = JDBC type = null
name = OracleConnectionPoolDataSource type = JDBC_DataSource
name = CONNECTION_1 type = JDBC_Connection
name = JDBC type = null
name = OracleConnectionPoolDataSource type = JDBC_DataSource
name = CONNECTION_2 type = JDBC_Connection
ADMN-906025
dcm/logs/dcmctl_logs/.dcmEx :
The opmn request has failed. From opmn: HTTP/1.1 204 No Content
Content-Length: 0
Content-Type: text/html
Response: 0 of 1 processes started.
Check opmn log files such as ipm.log and ons.log for detailed.t
my.site.comxpq ~ t
roracle.ias.sysmgmt.exception.DcmCmdLineException: Remote Execute Exception 806212
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkStatus(DcmCmdLine.java:1207)
opmn\logs\ipm.log : clear
opmn\logs\ons.log : clear
opmn\logs\HTTP Server.1 :
Warning: setuid to root failed, en = 1
perhaps root.sh was not run? Continuing as current user
/usr/home/ias/OraHome1/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 6 of /usr/home/ias/OraHome1/Apache/Apache/conf/mod_osso.conf:
Unable to deobfuscate the SSO server config file, /usr/home/ias/OraHome1/Apache/Apache/conf/osso/osso.conf, error Bad padding pattern detected in the last block.
What can i do ?
Oleg I sent this to our resident expert and here is his reply.
Chet
It looks like they did not run root.sh during their installation process or root.sh exited prematurely hence the setuid bit is not set on
$ORACLE_HOME/Apache/Apache/bin/.apachectl. This means that OHS is running as the user that installed iAS, not root which
causes the de-obfuscation of the mod_osso configuration file to fail. They have two choices:
The first is to execute the necessary commands as root. They can either become root and run root.sh which should still be laying
around in the base directory of their ORACLE_HOME or if they don't have root.sh laying around, they should become root and
execute the follow commands:
cd $ORACLE_HOME/Apache/Apache/bin
chown root .apachectl
chmod 6750 .apachectl
If they don't want OHS to run as root and they are willing to stick to ports bigger than 1024, the second option is just to reregister
mod_osso with the SSO server as documented in the 9iAS security admin guide except that they should not specify the userid as
root. They should just omit the -u root option on the command line for ssoreg or use -u and the userid that installed iAS.
Hope that helps! -
Prime Infrastructure 1.3 Can't start DB.Can't use WEB interface access
Hi,
Suddently, all services at prime infrastructure 1.3 are stopped. It's working fine previously. I try to restart the ncs service also doesn't help.
here is the ncs status:
PRIME01/netsvcsdm# ncs status
Health Monitor is running, with an error.
initHealthMonitor(): can not start DB
Reporting Server is Stopped
Ftp Server is Stopped
Database server is stopped
Tftp Server is Stopped
Matlab Server is Stopped
NMS Server is stopped.
SAM Daemon is not running ...
DA Daemon is not running ...
Syslog Daemon is not running ...
status
PRIME01/netsvcsdm# ncs start
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Health Monitor is already running.
Failure during Network Control System startup. Check launchout.log for details.
start
Note: I notice that the MEM LED at light path diagnostics panel components is lit. I check at cisco documentation, it indicate memory error. is it confirmed appliance issue?
Please advice. Thank youThank you for the reply. sorry for late update.
1. I try to reseat the memory card, MEM LED from diagnostic panel is not lit anymore. I think it solve the memory problem initially.
2. I use the following command to refresh the database
NCS stop
NCS DB reinitdb
NCS start
After reinitdb, I can login to prime infrastructure. it seems like the system is working fine. All of the configuration is gone. So, I proceed to restore the configuration.
3. Restore configuration
When I try to restore my configuration, I have the following error.
PRIME01/netsvcsdm# restore 2013-07-24_PRIME01-130724-1853.tar.gpg repository localftp application NCS
Restore may require a restart of application services. Continue? (yes/no) [yes] ? yes
Initiating restore. Please wait...
Stage 1 of 9: Transferring backup file ...
-- complete.
Stage 2 of 9: Decrypting backup file ...
-- complete.
Stage 3 of 9: Unpacking backup file ...
--complete.
ERROR : There is the mismatch in the following configuration parameter(s) of this machine when compared to the machine where the backup was generated: DB Memory Target, RAM Size -> can’t restore the configuration due to RAM size different.
ERROR : This may affect the performance of the current machine. Hence aborting restore process.
% Application restore failed
PRIME01/netsvcsdm#
PRIME01/netsvcsdm# show inventory
NAME: "PRIME-NCS-APL-K9 chassis", DESCR: "PRIME-NCS-APL-K9 chassis"
PID: PRIME-NCS-APL-K9 , VID: V02 , SN: KQ7T4TM
Total RAM Memory: 12141876 kB -> Appliance only detect the RAM memory as 12GB. Our Appliance has 16GB memory. I suspect 1 of 4 memory was spoiled.
I notice that the prime only detect 12GB RAM instead of 16GB. There is hardware failure (1 of 4 memory is spoil). Unit have to be RMA.
Thanks, -
Hi,
I succesfully (?!) installed ias R2 (j2ee only) and the patch on Suse Linux 8.0. I can start emctl, but dcmctl fails with ADMN-906025.
I tried resyncing and an updateConfig but that does not help.
It seems from the logs that it tries to connect to a Directory server. But I don't have OID or ldap running.
Is this necessary or is possible to do without it? (if yes, how?)
Ciao
Ainotry running
OH/dcm/bin/dcmctl cleanIf you installed J2EE&WebCache install type without
SSO, OID server is not contacted for anything.
In such a case, dcm is only controlling existing
instance. -
ERROR 1058 WHEN starting INFRASTRUCTURE
I am using Portal and Infrastructure 10g
metadatabase ASDB is 9.0.x
In order to use Oraacle Warehouse Builder(OWB) i had to have a 10.1 level runtime DB.
So I installed 10g oracle database and kept one listener at that level (10.1). Infrastructure listener has been deactivated.
Listener.ora and tsnames .ora where updated on INFRAstructure instance to be nearly identical to 10g DB instance (diference is one db definition)
However starting infrastructure and portal instances has become erratic and error prone:u
It takes about 20 minutes to start these two instances by hand has before i had only to start them and everything went smoothly (but took also a long time).
Now i get the following messages and have to use following opmnctl commands to have the whole thing running as follows:
==> start INFRASTRUCTURE
lancement de tnslsnr: veuillez patientez...
failed to start service, error 1058 ==> new message
TNS-12536: l'opération provoquerait le blocage ==>new
TNS-12560 erreur d'adaptateur de protocole ==> not new and didn(t care
TNS-00506 l'opération provoquerait un blocage ==> new
32-bits Windows Error: 997: Unknown error ==>not new and didn't care
I also get from SMTP the following mail:
Nom=LISTENER_ternes-1-81-57-68-1.fbx.proxad.net
Type=Listener
Hôte=ternes-1-81-57-68-1.fbx.proxad.net
Mesure=Status
Horodatage=2 nov. 2004 23 h 34 CET
Gravité=Critique
Message=The listener is down: TNS-12541: TNS:no listener .
Nom de la règle=Listener Availability
Propriétaire de la règle=SYSMAN
1-opmnctl status
opmnctl status
IAS-component process-type pid status
OID OID N/A Down
OC4J OC4J_SECURITY N/A Down
HTTP_Server HTPP_Server 1588 Alive
dsm-daemon dcm-daemon N/A Down
LogLoader logloaderd N/A Down
here its very erratic sometimes OID is in STOP status
2-opmnctl startall
opmnctl status
opmnctl status
IAS-component process-type pid status
OID OID 3504 Alive
OC4J OC4J_SECURITY 3416 Alive
HTTP_Server HTPP_Server 1588 Alive
dsm-daemon dcm-daemon N/A Down
LogLoader logloaderd N/A Down
3_opmnctl startproc ias-component=dcm-daemon
opmnctl status
IAS-component process-type pid status
OID OID 3504 Alive
OC4J OC4J_SECURITY 3416 Alive
HTTP_Server HTPP_Server 1588 Alive
dsm-daemon dcm-daemon 5524 Alive
LogLoader logloaderd N/A Down
At that point i can start Portal instance
Processes in Instance: PORTALBI.ternes-1-81-57-68-1.fbx.proxad.net
----------------------------------------------+---------
ias-component | process-type | pid | status
----------------------------------------------+---------
wireless | OC4J_Wireless | 5292 | Alive
wireless | messaging_server | 3456 | Alive
wireless | performance_server | 1364 | Alive
Discoverer | PreferenceServer | 2080 | Alive
Discoverer | OAD | 2124 | Alive
Discoverer | OSAgent | 1688 | Alive
OC4J | OC4J_WSRP | 820 | Alive
OC4J | OC4J_Portal | 4264 | Alive
OC4J | OC4J_BI_Forms | 5020 | Alive
OC4J | home | 4948 | Alive
WebCache | WebCacheAdmin | 1976 | Alive
WebCache | WebCache | 3500 | Alive
HTTP_Server | HTTP_Server | 1912 | Alive
dcm-daemon | dcm-daemon | 5048 | Alive
LogLoader | logloaderd | N/A | Down
What is the way to get the whole thing up at once and not in 20 minutes
Service OracleINFRAASControl takes about 10 minutes to start (INFRA name of infrastructure instance)
How is it possible to think of getting one day into production?
Thanks for help
jacques parisotStart Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Error Starting DCMCTL (ADMN-202026)
Hi,
I have been facing a problem while executing ./dcmctl start.
I am following the below sequence to start Oracle 9iAS
a)Start Customer Database.
b)ORACLE_HOME/bin/lsnrctl start(Start Infrastructure)
c)ORACLE_HOME/bin/sqlplus /nolog
sql> connect sys/password_for_sys as sysdba
sql> startup
sql> quit
d)ORACLE_HOME/bin/oidmon start
e)ORACLE_HOME/bin/oidctl server=oidldapd configset=0 instance=1 start
g) $ORACLE_HOME/dcm/bin/dcmctl start (infrastructure)
h) $ORACLE_HOME/dcm/bin/dcmctl start (BI)
When i execute the Step g ie $ORACLE_HOME/dcm/bin/dcmctl start (infrastructure) It throws an Error ADMN-202026.
Then i again execute the step e)ORACLE_HOME/bin/oidctl server=oidldapd configset=0 instance=1 start
and then step h.It executes fine sometimes.
But in certain cases it again throws an error ADMN-202005.
This is because the listener has somehow terminated.Then i again go through all the steps.Then it works fine.
Kindly suggest a suitable solution.
Regards
DeepakAfter i change the ip address of the server it give me this error when i try to startupNot so much information... AS version ? OS ?
Did you execute chgiphost script ? (chgiphost.sh on Linux/Unix). -
Error "can not start the configuration in parallel does not correct"
Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error -
Can not start data Collection service
I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?
-
I can not start secion in creative cloud from a macbook
I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
En español.
No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
we want a valid and positive responseHello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
Please let me know if you are successful or not. -
Can not start Enterprise Manager web page
I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Dondiego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config" -
"can not start a job" issue in AWM
Hi ALL,
I am maintaining my cube from PLSQL with following options
1. buildtype = "BACKGROUND"
2. trackstatus = "true"
3. maxjobqueues = 3
i get following error when i see the "olapsys.xml_load_log" table
***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
Hi Keith, it will be great if you can answer this one.
My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
Kind Regards,
QQ
Message was edited by:
dwh_10gApplies to:
Oracle OLAP - Version: 10.1 to 11.1
This problem can occur on any platform.
Symptoms
- We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
- When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
- However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
13:29:39 ***Error Occured in BUILD_DRIVER
- In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
hv=1976722458 ad='76dd8bcc'
begin
DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
'DEFAULT_JOB_CLASS', true, true, :3); end;
END OF STMT
PARSE
#20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
1176987702325167
ERROR #20:err=27486 tim=465202984
Cause
User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
Solution
1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
e.g.
SELECT user_id,username FROM all_users WHERE user_id=91;
2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
3. Ensure that the CREATE JOB privilege is listed.
The CREATE JOB privilege can be granted in various ways to a user:
- via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
GRANT OLAP_USER TO <username>;
- explicitly
GRANT CREATE JOB TO <username>; -
I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
iTunes wont install. It says "The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked. Help!!!!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683) -
When installing itunes get error "program can't start because msvcr80.dll is missing
I cancelled the installation of the latest version of iTunes on my Windows PC and when attempting to reinstall it, I now get a message that "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix the problem." Reinstalling the program does not fix the problem. Repairing the installation does not fix the problem. A search shows the "missing" file does exist in the MSOCache directory.
Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue
for additional help:
ASC user turingtest2 contribution: Troubleshooting issues with iTunes for Windows updates
or for specific Windows versions:
Apple HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Apple HT1925: Removing and Reinstalling iTunes for Windows XP -
When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.
Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
How to Include a KF which dispay serial no of the records
Hi, I had 52 rows in my report (each represent week (restriction) My requirment i need to include a formula in Columns which will be like a serial no....1...52 Basically it should display 1 for row1,2 for row2....35 for row 35 and 52 for row 52 How c
-
How to access kuler in Illustrator cs4
I am still using Illustrator cs4, and I was working on a file, and when I tried to access Kuler, it said not connected. I checked my internet connection and it is working fine.I even tried to access the update server and it said not available. I wa
-
Question RE: Security/Virus Program for Macbook Pro
Greetings, I was wondering if you would recommend Avast 2014 Antivirus Software protection for the macbook pro. If not, is there any other programs and/or other applications I should know about or use to help with viruses and security? I was also con
-
Ipod 30 GB: no search option?!
Hi all, now I have my own Ipod (5. generation, 30 GB). Its working fine, but there isn't any search option in the menu. I already updated my software but there is still this problem... what can I do? thanks for helping and sorry for my english =)
-
Enter / Execute Query Anomoly in Web Forms
Hi, I have a problem when running Oracle Forms [32 Bit] Version 6.0.8.11.3 (Production) in client server mode vs web mode. The problem is that the f7 (Enter Query Mode) button will put the field into enter query but when you go to type something in t