Can't start installer in updated Windows 2000 SP4?
Hello.
It looks like there a DLL problem (Unable to locate DLL (gdiplus.dll)) when starting the installer for u23 on two different updated W2K SP4 machines. :( u22 installer worked fine though! What's up? A bug?
I had to search for a gdiplus.dll in my HDDs and copy it next to the installer, and that worked. It looks like a bug! :(
Thank you in advance. :)
but I have add tnsnames.ora following
Rep60_REPORT_SERVER =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = REPORT_SERVER)(PORT = 1951))
then I start report server with:
/PATH_TO_REPORTSERVER/report60_server start
it still says:
REP-0186: Daemon failed to listen to port
what is problem?
any thing must be done to activate changes in
tnsnames.ora?
null
Similar Messages
-
Can't start report server on windows 2000
I can't start report server with error code 186, my tnsname.ora is
REP60_DUQ = Rep60_DUQ
is it error?
who can tell me how to resolve it!!!but I have add tnsnames.ora following
Rep60_REPORT_SERVER =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = REPORT_SERVER)(PORT = 1951))
then I start report server with:
/PATH_TO_REPORTSERVER/report60_server start
it still says:
REP-0186: Daemon failed to listen to port
what is problem?
any thing must be done to activate changes in
tnsnames.ora?
null -
my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.
It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too. -
Help! oracle report out of order after update Rollup for windows 2000 sp4
hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanksI don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this. -
When I run the setup.exe file on a Windows 2000 system it installs properly, but the same file run on a XP Professional system I get an error stating Fatal Error: Installation ended prematurely because of an error.
See here for more information on the specific installer I'm trying to use.
In fact I get this error for any stand alone executable I try to install on any XP machines. I am using LV 7.1. Is there a way to manually install eve
rything?
ThanksSure you can Install a lv application manually. just copy the exe-file,
support files in a folder. For the runtimeengine just copy the file
lvrte.dll in the folder of your application or in the windows system folder.
Hope that helps, Niko
BB Herman wrote:
> Why will a stand alone executalbe with an installer work on windows
> 2000 and crashes on windows xp professional?
>
> When I run the setup.exe file on a Windows 2000 system it installs
> properly, but the same file run on a XP Professional system I get an
> error stating Fatal Error: Installation ended prematurely because of
> an error.
>
> See
> HREF="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000...
for more information on the specific installer I'm trying to
> use.
>
> In fact I get this error for any stand alone executable I try to
> install on any XP machines. I am using LV 7.1. Is there a way to
> manually install everything?
>
> Thanks -
I can't start Illustrator CC on Windows 8.1 64bit.
I can't start Illustrator CC on Windows 8.1 64bit.
I've installed some apps (Photoshop, InDesign, Flash, Dreamweaver, Acrobat, Muse) from Cloud and they work correctly. When I try to run Illustrator there's an infromation on screen (error raport) that Illustrator can't work 'cos of system operation language (cannot run with Unicode).
I don't know what to do in this case?
My system is Windows 8.1 64bit.
Language is Polish, could it be bacause of that?
Regards -
Oracle report out of order after update Rollup for windows 2000 sp4
hi
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
thanksHi
first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
Thanks -
Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4
Hi
Sorry for re-posting on this JAVA FX Installation Form form (earlier on JAVA FX general )
Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4
Status : Not able to install
Error : JavaFx(Tm) 1.2 can not be installed on system esrlier than Windows XP x86
May be my OS ( Window 2000 SP4 ) obsolete but I cannot update since Major of other (JAVA 1.5) dev happens on my system
Any Ideas ..... :(
with regards
KarthikDon't crosspost, please!
-
Need Help Downloading Windows 2000 SP4.
I recently had a problem with my ipod installation disk and some one had told me I had to download Windows 2000 SP4, well Last night I had downloaded Windows 2000 Service Pack 4 and right after downloading it had been on my desktop so I went to click it and 2 Errors came up which said The W2KSP4_EN.EXE File Is Linked To Missing Export NTDLL.DLL:NTShutDownSystem, and the second Error said A Device Attached To The System Is Not Functioning.
I dont know much about computers and dont know what im doing wrong, I would uninstall it and download it again but I have dial Up and it takes 7 hours to download.
Can anyone help??Most likely there is a problem with your downloaded file. Can you ask someone with Broadband to download it and burn a CD to you?
Windows 2000 Service Pack 4 -
Install SAPgui 710 on Windows 2000 SP4
Hi,
I try to install SAPgui 710 on Windows 2000 SP4. But when i launch SetupAll.exe, window "SAPgui install master" does not appear.
Although, Install SAPgui 640 on Windows 2000 SP4 is success.Hello Sergey
please be sure that the INTERNET EXPLORER 6 is installed on the W2k Clients!
If not, then the new NWSapsetup can not start!
Many of my messages in the OSS with same error description had under W2k the problem that the IE there was not in version 6.
If you can not solve this problem by yourself, please open a message in "OSS" under BC-FES-INS !
Best Regards
Sven -
5G iPod and Windows 2000 (SP4)
I have successfully installed various iPod models to a number of Windows XP-based computers, but I am having problems installing my new 5G iPod to my Windows 2000 (SP4)-based machine.
Upon connecting the iPod to a USB 2.0 port (self-powered hub, 500 mA per port) on my machine, Windows 2000 finds the iPod and lists it in Device Manager as "? Other devices/ ? iPod" and calls for a computer restart. On restarting the computer, Windows 2000 finds the iPod, loads iTunes, and updates the iPod. However, Windows 2000 doesn't list the iPod as an "Other device" at this point, although it does show up under "Universal Serial Bus controllers" as a "USB Mass Storage Device." So far so good. But then, after a few minutes (remaining connected to the computer all the while, with iTunes running), the iPod turns itself off. iTunes still shows that the iPod is connected, but if I instruct iTunes to "Update the iPod," iTunes can't locate it and I get a "System Settings Change (new device)" window from Windows 2000 instructing me to restart my computer. Also, the iPod does not charge when connected to a USB 2.0 port unless Windows 2000 has found the iPod, listed it as an "? Other devices/? iPod" and is waiting for a restart. In this case, it charges just fine.
Is the 5G iPod truly compatible with Windows 2000 as advertised? Is there a fix for the problem that I am having? I have tried ALL recommended trouble-shooting steps several times, to no avail.
ASUS P2B-LS Windows 2000 Service Pack 4 InstalledYour version of Windows is not compatible with iTunes 7.4 or the third generation iPod nano.
(24749) -
I have setup PEAP with ACS Server and it works fine on Windows XP. How can I connect Windows 2000-SP4 PC to the access point with PEAP? Wireless service is running and I have enabled 802.1X with PEAP under the Authentication tab of the network card.
What options should I select under ACU?
ThanksHi Avil,
Have a look at this doc to see if it helps;
ACU Installation Precautions
Observe these precautions when you are installing the ACU:
PEAP client devices use the EAP 802.1X support provided in the Windows XP and Windows 2000 operating systems to enable authentication.
Note You must use the operating system to configure the authentication parameters of the PEAP supplicant.
Windows XP supports EAP 802.1X as a standard authentication type. Windows 2000 supports EAP 802.1X authentication with Service Pack 4, but does not provide a Zero Configuration for client adapters. Hence, the ACU (or equivalent) software must be used to configure the client adapter 802.11 operating parameters.
When installing the ACU software, select PEAP support during the initial installation. The PEAP supplicant cannot be added or enabled incrementally after installation; the ACU software must be reinstalled with the PEAP support option selected.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_technical_reference_chapter09186a008025d6ee.html#wp1007967
Hope this helps!
Rob
Please remember to rate helpful posts........ -
How to configure Failed RID master in Windows 2000 SP4 DC?
We are still using windows 2000 SP4 server due to application compatiblity of our core application, this error has occur during a fire here in our office then the physical server itself, migrated to our DR site, then after that event the physical server
itself join again to its original place where as, in H.O branch.
First Problem:
Now our branch office site users always fails to log to their workstation, we still need to reset their password again and again after the day ends , and it will come back again tomorrow.
Second Problem:
When we are adding a user account it always say's "Windows cannot create the object because the Directory Service was unable to allocate a relative identifier" it predict that the RID master has been corrupted because of the migration
from site to site,
Can I still have answers here even though this is way way to obsolete from microsoft, I need help please :)Hi thanks for your kind reply,
No, there are 4 DC in our environment but the forest root DC has the problem, I only create user accounts, I still not creating other object in active directory.and also the replication between root DC and other DC has problems. but I think its in the DNS
part, just need step by step process. :)
I'll give it a try on what you suggest but is this tried and tested? because when you replicate from corrupted FSMO roles DC, the new DC will also infected with errors,
By the way I already tried ntdsutil to fix the AD database and all are passed. -
BOXI R2 SP4 on Windows 2000 SP4 and Internet Explorer 6 Service Pack 2
Hi
I have a customer that has BOXI R2 SP4 installed on Windows 2000 SP4. He is aware that Internet Explorer 6 Service Pack 1 is not supported for BOXI R2 SP4 but he is not able to find I.E SP2 for Windows 2000 SP4. What can he do as he is experiencing some inconsistencies in Webintelligence?
I have suggested already to:
downgrade BOXI R2 to SP3 and use the line 3 of code as this supports I.E. SP1
upgrade the O/S to XP and use BOXI R2 SP4 and I.E. SP2
Thank you in advance.
Regards,
FedericaI don't see any reason to downgrade BOXi R2 to SP3.
While Microsoft will continue to support Windows 2000 till 2010, BO advises recommends that customers be on the latest SP. In your customer's case, this will not be possible. Also tech support will require one to be on the latest SP before they will troubleshoot any issues. ADAPT resolution also requires on to be on the latest SP.
I think it prudent to upgrade the OS (on the clients) to XP. -
10g (10.2.01) setup/java.exe hangs on Windows 2000 SP4.
Hi all,
I'm currently having an issue with a 10g install on Windows 2000 (SP4) hosted on a Windows Virtual Machine.
I remote to this machine using PCAnywhere.
When I run setup.exe it just hangs on the java.exe process.
I have run the setup with a -debug option and am not seeing anything out of the ordinary.
I have also checked the the log and it does not seem to contain any errors.
I have run through the 10g pre installation requirements and don't believe that is a problem as the
machine and OS meets all the criteria.
I have researched a similar setup.exe/java.exe hanging issues and have tried some of those solutions to no avail.
For instance moving the 10g the install folder to C: drive and confirming there are no spaces in the install path.
Increasing the JRE memory allocation to 1024 in oraparam.ini
Log file contents:
Using paramFile: C:\10g_Client_10201\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
C:\10g_Client_10201\install\unzip ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The commandline for unzip:
C:\10g_Client_10201\install\unzip ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The commandline for unzip:
C:\10g_Client_10201\install\unzip ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 100.
Total args: 23
Command line argument array elements ...
"C:\Temp\OraInstall2008-10-21_04-54-08PM\jre\1.4.2\bin\java.exe"
-Doracle.installer.library_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\lib\win32"
-Doracle.installer.oui_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\oui"
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location="C:\10g_Client_10201\install"
-Doracle.installer.jre_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\jre\1.4.2"
-Doracle.installer.exec_location="C:\10g_Client_10201\install\oui.exe"
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=""
-mx1024m
-cp
"C:\Temp\OraInstall2008-10-21_04-54-08PM;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraInstaller.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\oneclick.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\xmlparserv2.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\srvm.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\share.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraInstallerNet.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\xml.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\orai18n-collation.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\orai18n-mapping.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\emCfg.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ojmisc.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstImages.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_de.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_es.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_fr.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_it.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_ja.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_ko.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_pt_BR.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_zh_CN.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_zh_TW.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\oracle_ice.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\help4.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\help4-nls.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3-swingaccess.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3-nls.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\swingaccess.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\classes12.jar;\;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraPrereq.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\jewt4.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\jewt4-nls.jar"
oracle.sysman.oii.oiic.OiicInstaller
-scratchPath
"C:\Temp\OraInstall2008-10-21_04-54-08PM"
-sourceLoc
"C:\10g_Client_10201\install\../stage/products.xml"
-sourceType
network
-timestamp
2008-10-21_04-54-08PM
-debugAs Daniel stated on his previous post, this is not supported from the official oracle point of view, so if you are implementing this for production environments, even if it worked, you would be on your own. However, this should work. Check if you have any other java environment on the scope of the PATH environment variable. A virtual machine is from the OS configuration point of view the same as a physical machine, if the PATHs are scrambled and if you are accessing different versions of JRE at install time, this won't work, and the first symptom is a frozen java session.
~ Madrid
http://hrivera99.blogspot.com
Maybe you are looking for
-
firefox uses 429,992/1108 memory right now with only 3 basic tabs open-no graphics
-
I generate an HTML page with a Servlet and I have a combo box that lists numbers 1-20. Depending on a parameter that is passed to the servlet I want to set the Combo box to be initalized to (display) a certain number. Does anybody know how I can do t
-
I have a fissure on my ibook G4. What can I do for it?
Hel, I'm french so sorry if my english is not as good as yours. I had a fissure on my ibook. It is situated in the right corner, near the end key on the keyboard. The laptop didn't fall down and had no shock. I have had it for 15 month, so the APPLEC
-
Hi Guys I've written an update program that makes changes to the T510 table in one client but I need to transport it programmatically to another client. Programmatically in the sense that after the update program has finished I need it to come up wit
-
Hello everyone, Can anyone explain what is WHO's WHO functionality? Also where can I find the switch (name?) for Whos Who functionality for Org Chart and Calendar?? I guess it is in T77SO but I am not familiar with the names