Can't Start Itunes after itunes 8.0 upgrade
I just installed Itunes 8.0, and whenever I launch the app it says "windows is installing itunes 8.0"
I dont get it. I tried it several times uninstall and reinstall, and the same thing happens. When I try to launch the program, it starts installing again, and I can never get past the installing page.
What do i do?
Thanks
Sometimes the following quick fix works.
Go to Program Files\iTunes and double click on iTunes.exe.
Does iTunes open normally if it does, then right click on iTunes.exe and select Send to>>Desktop (create short cut).
Hopefully this will create a short cut on your desktop that will allow you to open iTunes normally.
For a longer and more complex solution, see this post:
http://discussions.apple.com/message.jspa?messageID=5489263#5489263
Similar Messages
-
Integration builder can not start up after sp9 to sp15 upgrade
ID cann't start up, but IR can.
java web start error is :
can;t download http://sp001:50000/dir/directory/iaik_jsse.jar
I have tried re-Initialization but not work.hi
ref this
Java Web Start
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]
XI Integration Builder run on top of Javau2122 Web Start 1.4.2, which is part of J2SE 1.4.2.
You need to download Javau2122 WebStart 1.4.2
Troubleshooting:
Probably Javau2122 WebStart does not detect the correct Proxy Settings .
This could be set to None or to specific for values HTTP Proxy and HTTP Port .
Contact your network administrator for the correct settings.
To change the Proxy Settings:
Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
Choose File -> Preferences -> General
Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
ChooseOK
Close Javau2122 Webstart -
I can´t start my new iTunes account without insert credit card number
Hello,
I can´t start my new iTunes account without insert credit card number.
I have my new Apple ID, star itunes and to log for the firt time, becouse it´s firt time I need to agree with to terms of use and next need to give my credit card numbers which I do not want to do. But without this information will not let me go, what can I do?
Thanks for your help!Hi Limnos,
I already have an Apple ID, the problem is how to use it in iTunes for the first time without asking for credit card.
Your solution is to create a new Apple ID but I've already got one, how can I use it?
Thank´s. -
I see the "Connect to iTunes" screen and the device appears in iTunes. Every time I connect to iTunes, iTunes says my device is in recovery mode and has to be recovered so I do so. The same recovery message shows in iTunes after iTunes is complete. I have a iPod touch 64gb. I have no idea what OS is on it now that iTunes has tried to recover it and erased all info.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
Can't start Tomcat after installing Bea WorkShop for JSP
Hi,
I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.I installed BEA Workshop for JSP Version: 3.1.0
Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
Thanks for your assistance.
Ron -
Can't Start Portal After Install
After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the same message.
What password should I use to start the server?I've followed the directions and am experiencing the exact same problem. Brand
new installation of Weblogic server 6.1 SP2 with examples. That install is working.
Then added Portal 4.0 SP1, updated the license file and I have the same issue
with the Illegal access exception resulting in the "Fatal initialization exception"....
Hmm!
[email protected] (Bowrat) wrote:
Below listed are the common errors you run into during installation
process:
- You need to have the correct version numbers of both the weblogic
server and the portal server. For instance the portal server 4.0 (eval
copy) will only run on WebLogic 6.1 SP1. So check the edocs for
supported platforms
- Make sure you have the installed the full version of the weblogic
server (including examples)
- Finally, you need to run the UpdateLicense.cmd file to update the
license.bea under ur Bea Root
Give it a shot after u have checked all of the above three - goodluck
- Bowrat
www.Bowstreet.com
Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
From: Steve Anderson <[email protected]>
Newsgroups: weblogic.support.install
Subject: Can't Start Portal After Install
References:
NNTP-Posting-Host: 209.11.114.150
X-Original-NNTP-Posting-Host: 209.11.114.150
Message-ID: <[email protected]>
Date: 13 Feb 2002 20:25:53 -0800
X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
Organization: BEA SYSTEMS Inc
Lines: 18
XPident: firewall-user
Path: newsgroups.bea.com!209.11.114.150
Xref: newsgroups.bea.com weblogic.support.install:9600
After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the samemessage.
What password should I use to start the server? -
We changed PORTAL password by going top sqlplus and OAS. Thinking it will make changes at both places. Now we see that when we start OAS. OC4J_BI_FORM does not start???
I provided an answer in the Portal Security forum:
Can not start OC4J_BI_FORM after PORTAL user password change -
Can not open iphoto after downloading iPhoto Library Upgrader tool
can not open iphoto after downloading iPhoto Library Upgrader tool
I understand you used the iPhoto Library Upgrader iPhoto '11 or later: About the Library Upgrader - Apple Support
try rebuilding the library: iPhoto 6 and later: Rebuilding the iPhoto library - Apple Support
If it doesn't work, recover your iPhoto library from Time Machine: iPhoto '11: Restoring from Time Machine with iPhoto '11 (9.2 or later) and OS X Lion 10.7.2 (or later) - Apple Support -
Can't open iTunes after iTunes 10 download Help Please?
Could someone pretty please tell me what I can do to get my iTunes open up. I not only have an iPod but my iPhone too!!!! This includes all my business contacts, agendas, calendars are all looped thru iTunes for my iPhone ...
I am having the same issue. I was able to use iTunes to rent a movie, watch the movie, and since then, it shuts down less than 10 seconds after start up. Is there something wrong with the newest version of iTunes?
Can anyone tell me why iTunes is shutting down automatically and what can i do to fix it? -
Can i start a new itunes library on a mac?
i understand that holding shift woks for windows but not mac. my specific problem is that i have 300 songs on the computer but 700 on the ipod. i just bought an album on the computer that i cant transfer to the ipod. if i can start a new library and sinc all 700 songs to it i can just move the album.
Yes, you can sync content to an iPod from a source other than the iTunes Store. iTunes won't import such content from the iPod.
(60781) -
My files are a mess - how can I start over in iTunes?
Over the years, my music files have become scattered all over between different locations on my internal drive and various externals. I have tons of duplicates, lost files, and it's just a general mess.
I would like to do a search for all my music files, and completely start over with iTunes and keep them on my MacBook Pro. I have room on my internal (or would, if they were oranized properly and I got rid of duplicates!) but a lot of the files that show up on iTunes are on an external so of course it will ask me where they are. This is driving me crazy and I want to just scrap everything and start over fresh.
I have a 1TB external that I can dump them all on while I change over.
Any suggestions on the best way to do this would be welcome, as well as whether there are programs available that would help with this (or is it just as doab;e without a separate application).
TIA, Alicia MorganAlicia Morgan wrote:
Over the years, my music files have become scattered all over between different locations on my internal drive and various externals.
basically, the question is: does iTunes know where all these files are ? or does iTunes show a "!" next to any files ?
I have tons of duplicates ...
_*How to find and remove duplicate items in your iTunes library*_
_*http://www.araxis.com/find-duplicate-files/ (free trial)*_
_*http://dougscripts.com/itunes/itinfo/dupin.php (commercial)*_
... lost files
see
iTunes Track CPR v1.3
This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx)."
or
_*Music Folder Files Not Added v2.0*_
This application will list the file paths of the files in your designated "iTunes Media" folder which are not in iTunes' library. Additionally, you can select a different parent folder and its contents will be compared to the iTunes library. Options to Add a selection of found files to iTunes or move them to the Trash.
... completely start over with iTunes and keep them on my MacBook Pro. I have room on my internal (or would, if they were oranized properly and I got rid of duplicates!) but a lot of the files that show up on iTunes are on an external so of course it will ask me where they are.
once you have gotten rid of dupes and located the lost files, you could consolidate your library:
(a) go iTunes > preferences > advanced and make sure
o iTunes media folder location is pointing to the iTunes music folder on your startup disk
o +keep iTunes media folder organized+ is checked
o +copy files to ... when adding to library+ is checked
(b) have any external HD holding any of your media files is mounted on your desktop
(c) go file > library > organize library > consolidate files
if the option to +upgrade to iTunes media organization+ is available, select that too.
JGG -
Iphone can't start up after reset.how do i get it to start up again?
iphone 3gs cannot start up after reset. How do i get it to start up again?
an icon with usb to itunes..what's that means?
-
[SOLVED] Can't Start MySQL after upgrading to 5.1.41-3
I can't start mysqld with 'mysqld start'.Here is my mysqld output:
[ahao@sky ~]$ mysqld start
091125 18:33:48 [Note] Plugin 'FEDERATED' is disabled.
091125 18:33:48 [Note] Plugin 'ndbcluster' is disabled.
091125 18:33:48 InnoDB: Started; log sequence number 0 44233
mysqld: Too many arguments (first extra is 'start').
Use --verbose --help to get a list of available options
091125 18:33:48 [ERROR] Aborting
091125 18:33:48 InnoDB: Starting shutdown...
091125 18:33:49 InnoDB: Shutdown completed; log sequence number 0 44233
091125 18:33:49 [Note] mysqld: Shutdown complete
This is my /var/lib/ complete with permission settings:
[ahao@sky ~]$ cd /var/lib ; ls -al
total 84
drwxr-xr-x 20 root root 4096 2009-11-25 18:08 .
drwxr-xr-x 13 root root 4096 2009-11-25 13:51 ..
drwxrwx--- 2 root policykit 4096 2009-05-10 09:10 PolicyKit
drwxr-xr-x 2 policykit root 4096 2009-05-10 09:10 PolicyKit-public
drwxr-xr-x 3 root root 4096 2009-09-19 12:19 bluetooth
drwxr-xr-x 2 root root 4096 2009-09-16 22:09 dbus
drwxr-xr-x 2 root root 4096 2009-11-23 17:38 dhcpcd
drwxrwxrwt 2 root root 4096 2009-07-19 18:17 ex
drwxr-xr-x 2 root root 4096 2009-09-16 22:38 hwclock
drwxr-x--- 2 root locate 4096 2009-10-22 06:55 locate
-rw-r--r-- 1 root root 462 2009-09-20 00:02 logrotate.status
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 misc
drwxr-x--- 2 root locate 4096 2009-11-25 18:09 mlocate
drwxrwxrwx 4 mysql mysql 4096 2009-11-25 18:33 mysql
drwxr-xr-x 6 root root 4096 2009-09-07 08:54 nfs
drwxr-xr-x 4 root root 4096 2009-11-25 18:08 pacman
drwx------ 3 root root 4096 2009-11-21 03:30 polkit-1
drwxr-xr-x 2 root root 4096 2008-09-06 14:33 rarian
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 syslog-ng
drwxr-xr-x 3 root root 4096 2009-10-19 20:10 wicd
drwxr-xr-x 2 root root 4096 2009-11-21 02:35 xkb
/etc/mysql/my.cnf is out-of-the-box
What seems to be the problem here? Please shed some light...thank you
Last edited by akiglobal (2009-11-26 07:41:00)How silly of me.....first of all...I entered 'mysqld start', I should have just entered 'mysqld', second of all, I didn't change the file permission on /var/run/mysqld. I change /var/run/mysqld file permission into 'chmod 777 /var/run/mysqld -R', after that mysql works!
-
Can't start up after disconnect ethernet network of 2 macs
I tried conecting 2 macs via ethernet. Personal file sharing was turned on with both. Printer sharing seemed not to work, so that was disabled on both. Ethernet cable from systems to router connected to cable modem. Seemed to work well for my purpose -- access to second drive on old 733 G4.
Before I disconnected the ethernet cable, I turned off file sharing on both machines. They seemed to run fine after disconnect. Then turned off the G4.
I left the iMac running with some software active for one day while away from home. Returned to see blank screen. Moved trackball to wake from what I thought was display sleep but nothing happened.
Install disk (10.4.4) will start up machine, but cannot install to the internal drive since it is not seen. Disk Utility shows drive, but no volume to repair disk.
My question: Can I start up my iMac in a way to bypass looking for a network startup and see the internal drive?
20" iMac Core Duo 2.0 Ghz Mac OS X (10.4.6)"Target Mode will only work with ATA disks"
No, that is not correct, also works with SATA, which is in all Intel Macs. However, I think I recall that both computers need to be updated to the same Mac OS X version, such as 10.4.6
Apple article Startup key combinations for Intel-based Macs
Apple article with example of Firewire Target Disk usage with Intel Macs
Back to attempting normal startup:
hold down the "option" key instead of the x key above, and hold until the disk option you want to select appears. From my experience, the iMac Intel will show the startup disc choices quickly, within less than a minute under normal conditions, much quicker than the G5's. -
Can't start RoboHelp5 after I used trial of RH6
I installed the trial version of RH6 on my computer. (Before
doing so, I made backups of my project, in case of non
compatibility with RH5). After the trial period I decided not to
buy it yet and uninstalled RH6, because I couldn't find important
differences (at least not concerning the functions I'm using) and
because the font problem (conversion from Arial to Times, even with
the Adobe patch and after uninstalling alle security updates for
Office) was the same with RH6.
Now I can't start my projects at all. When I try to start the
RH Explorer I get a message, that the registry AppPath can't be
read. I uninstalled both: Office and RH completely, reinstalled
Office 2003, then RoboHelp, but the same problem is appearing.
Even the projects I saved as backup and that I never opened
in RH6 don't work any more.
Any idea what I can do? (can there be hidden elements of RH6
which are not deleted automatically, when uninstalling with the
Software menu in my control panel?)On my site there is a topic about installing and
uninstalling. In it there is reference to an Adobe topic covering a
full uninstall which does require some registry editing. That was
written for X5 but I think it will cover RH6. I cannot guarantee
that though.
Make sure you create a System Restore point before you start
playing with the registry and only do that if you feel confident.
If not, enlist some help from IT or a developer. -
Can't start apache after linking mod_wl_20.so in the https.conf
I get a segementation fault when trying to start apache after i have linked the apache plug-in.
Anyone ever run into this?
I fails whether the <IfModule> statement is there or not.Appreciate your response. This is all I have done.
Installed IHS 2.0.47, copied mod_wl_20.so file to modules directory and made one entry in httpd.conf:
LoadModule weblogic_module modules/mod_wl_20.so
IHS core dumps on when tried to startup. This is all that is documented in the "Using Web Server Plug-Ins with WebLogic Server" document. Please let me know if I am missing any additional information. Thanks! i would appreciate if you can email me your httpd.conf file for my reference. Thanks!
[email protected] or [email protected]
Suresh,
Maybe you are looking for
-
Please help me. I just dropped my IPhone 5S on the floor by accident. Is completely dead. I tried to turn it on, but nothing happens. Black screen, no notice,nothing at all. What can I do?
-
How do I cancel a text that will not go through
The test is stuck in the sending process it has not failed so I am not sure how to cancel it.
-
i wanna use scanner to scan some documents, i wanna know how to write a code using PL/SQL to interact with the scanner to scan the document and insert it into the database. Oracle 9i and Developer 6i are used. please help me in this thanks Wirfali
-
How to download music from amazon cloud to itunes
How do I down'oad music from Amazon cloud to itunes?
-
Is there a free replacement download for CS2?
We purchased Photoshop CS YEARS ago. Adobe contacted us a while back to let us know that they no longer support CS, and offered a free download of CS2. We have been using CS2 ever since. We just recently purchased a new lap top, and after logging on