Can't start multiway audio
I'm trying to start a 3-way audio chat, we are all running 10.4.3. We can all connect to each other fine doing 1-1 chats. I'm initiating, and I have a 300+ KB/s. The absoluet slowest connection in our trio is a 97 KB/s upload speed.
If I try to invite both people at the same time, then one person can connect but one person can't. It gives me the "xxxxx did not respond" message. If I try to invite one person, and then the other person, sometimes I get the same problem. Other times the little "+" button is grayed out, so I can't even try to add that person to the chat.
Any ideas what is going on? We all have 1.2 GHz+ G4's with 90+ KB/s connection speed, so we meet the requirements. And we can all connect to each other fine using 1-1 chats.
Thanks for any help.
Hi bobmcfred,
The iChat min speed for 1-1 chats is 100kbps. (This tends to be a average figure in Real world practice).
The min for 4 way (multichats) is 384kbs. (See second table in the link above)
The slow uplink speed is just not fast enough.
Which one gets accepted will depend on who answers first.
Ralph
Similar Messages
-
ThinkPad E545 - After Win 8.1 update: Can't start Dolby Audio ...
I have just updated my ThinkPad E545 to Windows 8.1 today. Every time after computer boots up, I get an Error message starting like "Dolby Advanced Audio - Can't start Dolby Audio. If this problem will stay restart the computer. I have Czech Wins that's why it should be little bit different. After restart the computer the note is there again. I found discussion where are helps like Uninstall Conexant, restart and then Install again. But the problem is still there. Maybe I do some mistake. Can anyone help me?
hi Sperl19,
Welcome to Lenovo Community Forums!
Your Dolby may not be synced with the Audio driver after the update,
Since Audio driver may had been updated by the 8.1 but not the Dolby app.
Here's what to do:
Open Device Manager
Uninstall the Audio Device Under Audio inputs and outputs
Then proceed to Control Panel / Programs / Uninstall a Program
Uninstall all Dolby Related programs
Restart if Prompted
Now install this software driver
Conexant Audio Driver
Now open Drive C: on the upper right hand side of the screen you will find a Search pane
Type in "aa" and hit search
You should find 1 of the result as dolby or if not post a screen shot of the results here
If ever you found it install that and it should bring your dolby back
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
I can't start an audio or video in ichat 6 on Lion
I chat used to work for me. Now I can't start up audio or video chats.
The error message I get is
"iChat can’t start the audio chat."
"Your computer is busy in another chat."
I have tried the following
restart ichat
reinstall ichat
remove ~/Library/Preferences/com.apple.iChat*
I am using gtalk as my account.
Any help would be awesome
NathanHi,
In Snow Leopard iChat and Face Time could be open at the same time and in fact use the camera (and or mic) at the same time.
I am not sure this is possible in Lion so I would launch Face Time and check that it is Off in the Preferences.
Although deleting all the com.apple.ichat .plists is excessive it should have closed any Open Chat (or what it thought was open) when you restarted. (Although you don't say you have restarted iChat since deleting them)
However there is one setting that may have upset this.
In System Preference > General Pane (Used to be the Appearance pane) is a check box to Cause any Open window on Quit to be reopened on any app launch.
If any window is Minimised to the DOCK that is where it is put back. (If it is trying to reconnect an audio or Video Chat this may be an Invite window)
As iChat can do Video and Audio Chats Peer-to-Peer it is pointless deleting com.apple.ichat.AIM.plist or the Jabber one or in fact the Yahoo one as once a chat is started you can log out of the relevant Buddy List (Make that Account Off Line).
It is possible that this a a new style Message in Lion to Say "Your Camera/Mic is in use in another application"
As Reinstalling (Hopefully iChat 6) and deleting all the .plist and then restarting should have given you a clean slate, as it were, it is difficult to see what the issue could be or what to suggest next.
10:41 PM Thursday; August 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
[Solved] Can't Start Pulse Audio and No Sound/Volume Controls
Ok, I booted my PC this morning to find I have no sound controls in Gnome Shell after an update yesterday or sound, I have to use alsamixer to unmute, so I am getting sound but no way to control it. I tried killing pulseaudio and restarting but I keep getting the same error:
pulseaudio -k:
E: [pulseaudio] main.c: Failed to kill daemon: No such process
pulseaudio --start:
E: [pulseaudio] main.c: Daemon startup failed.
start-pulseaudio-x11:
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
This is the output of pulseaudio -v:
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 6.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 74ef4413bd254c10a2eee6b69deab3c7.
I: [pulseaudio] main.c: Session ID is c2.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/dobbie/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "1002"
I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] sink.c: device.product.id = "aac0"
I: [pulseaudio] sink.c: device.string = "hdmi:1"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: device.description = "HD-Audio Generic Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100500"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of HD-Audio Generic Digital Stereo (HDMI)"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "1002"
I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] source.c: device.product.id = "aac0"
I: [pulseaudio] source.c: device.string = "1"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/USB Camera-B4.09.24.1/USB Camera-B4.09.24.1.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card USB Camera-B4.09.24.1
I: [pulseaudio] (alsa-lib)main.c: error: failed to import USB Camera-B4.09.24.1 use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card USB Camera-B4.09.24.1
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.
I: [pulseaudio] card.c: Created 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
I: [pulseaudio] alsa-source.c: Selected mapping 'Multichannel' (multichannel).
I: [pulseaudio] alsa-source.c: Cannot enable timer-based scheduling, falling back to sound IRQ scheduling.
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
I: [pulseaudio] alsa-source.c: Failed to find a working mixer device.
I: [pulseaudio] source.c: Created source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel" with sample spec s16le 4ch 16000Hz and channel map front-left,front-right,rear-left,rear-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "USB Audio"
I: [pulseaudio] source.c: alsa.id = "USB Audio"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "2"
I: [pulseaudio] source.c: alsa.card_name = "USB Camera-B4.09.24.1"
I: [pulseaudio] source.c: alsa.long_card_name = "OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-0000:00:1d.0-1.2, hi"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2"
I: [pulseaudio] source.c: udev.id = "usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "1415"
I: [pulseaudio] source.c: device.vendor.name = "Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc."
I: [pulseaudio] source.c: device.product.id = "2000"
I: [pulseaudio] source.c: device.product.name = "Sony Playstation Eye"
I: [pulseaudio] source.c: device.serial = "OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1"
I: [pulseaudio] source.c: device.string = "hw:2"
I: [pulseaudio] source.c: device.buffering.buffer_size = "12792"
I: [pulseaudio] source.c: device.buffering.fragment_size = "3192"
I: [pulseaudio] source.c: device.access_mode = "mmap"
I: [pulseaudio] source.c: device.profile.name = "multichannel"
I: [pulseaudio] source.c: device.profile.description = "Multichannel"
I: [pulseaudio] source.c: device.description = "Sony Playstation Eye Multichannel"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 3192 bytes (24.94ms), buffer size is 12792 bytes (99.94ms)
I: [alsa-source-USB Audio] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="2" name="usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" card_name="alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2 (alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 3 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session c2"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #20; argument: "").
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #20).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #19).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #18).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #17).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #16).
I: [pulseaudio] client.c: Freed 0 "Login Session c2"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #16).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #11).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #9).
I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
I: [pulseaudio] source.c: Freeing source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel"
I: [pulseaudio] card.c: Freed 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon terminated.
When I start pavucontrol I get this:
Can someone help me correct what the issue is, please let me know if you need more information.
Thanks in advance.
Last edited by Dobbie03 (2015-05-15 20:35:02)I tried "pulseaudio" in the terminal and get the following:
W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon. -
G780 - Windows 8.1 update - Can't Start Dolby Audio Driver
I just updated my G780 to Windows 8.1 this morning. every time I boot up the computer, I get an Error message stating" Dolby Advanced Audio - Unable to start the Dolby Audio driver. Please restart the computer or reinstall the driver if the problem persists. I have restrtaed the computer and I do not know where the driver is for this or where to install it. Please help. Computer is just over a month old.
hi
The Driver I gave you is very huge (185MB)
This is because it contains the dolby installer,
It depends on the Version where it will be located after installing the audio driver
and what name it will have,
Try Searching then for Dolby but make sure you open you drive C: and do the search
or otherwise
Try Navigating these folders
Open My Computer or ThisPC open you Drive C:
Now we'll look for the dolby Advanced audio installer
Look for these folders as these are through my experience where it goes
Also when you find the right folder you will find two of them together (Dolby Advanced Audio and Dolby Home Theater) just install what came with your system the dolby advanced audio.
C: Drivers / Conexant (Then look inside on all the folders inside it lkook for anything says like dolby)
C: Conexant (Then look inside on all the folders inside it lkook for anything says like dolby)
C: Program files x86 / Conexant (Then look inside on all the folders inside it lkook for anything says like dolby)
C: Program files x86 / Conexant (Then look inside on all the folders inside it lkook for anything says like dolby)
Trust me its in your PC now you just need to look for the installer
Reference:
Forum link
Forum link
Forum link
Forum link
Regards
Solid Cruver
-
How can I set the audio conference to automatically start AS HOST when the meeting starts?
I can easily setup an audio conference for any meeting, and set that conference to start. However, there doesn't seem to be a way for the conference to start as the moderator (or, host) when the meeting starts. This means I still have to dial in to the conference with a land line or cell phone and enter my host code to get the audio conference started.
The only audio conference provider at my company is The Conferencing Center. I don't seem to have a TCC account. What do I do to get this working? It's nuts to have to use a land line just to get the audio going.There are a number of integrated audio providers other than TCC, and those can be enabled in the Admin section of Connect. However, using the fully integrated bridge does still require that a Host/Leader be dialled in before audio will broadcast (or something other than hold music).
If you don't want to have to call in, I'd recommend that you use Universal Voice to tell Connect the dial in steps and give it the Host/Leader pin.Setting Up Universal Voice - Adobe Connect User Community.
The downside to this is that there will no longer be a dial out option for participants. -
Am doing an audio timeline in GB. Need to insert a corrected section of track. When I try the insert, it knocks out the top part of the adjacent track bridge/element. How can I insert cleanly in a timeline? Is it possible to "recover" the good track that was "stepped on?"
Undo what?
Insert in a new track?
I don't think so. I've started an audio book and I'm doing chapter long segments (assuming I can make simple corrections, such as ones made in iMovie and numerous other video editing programs. Routine edits in GB are simple and intuitive. I cannot wrap my mind around the fact that I'm prevented from doing a simple drag and drop, import or paste a two-sentence audio clip. Nor can I find any reference to straightforward audio elements.
Any suggestions you might have would be appreciated. -
FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1
FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?Hi Bob,
Thanks for the advice. It succeeded.
The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
Finally...
Sytze -
I,m new to Elements 10 and have just started editing. I just dragged a clip onto my timeline but can only hear one audio channel. I know there are two tracks, how can I mix both through?
thanks. DarrellHi Steve, thanks for your help. but this has really got me beat. When I play the track straight off my computer I hear all audio tracks. But then I “get media” bring the clip in and listen off the elements timeline – I only hear track one???
So my computer must be fine?
When you say “Can I see both right and left channel in the wave form? Its hard to tell – am I meant to be looking at the “green strip “ on the timeline? Its so very small. - I see a yellow line and a grey line underneath? what am I looking at. Its very frustrating because I am trying to edit a friends concert and the music is on track one – but the atmos and applause is on the other 3 tracks – but all I can hear is the music
any suggestions?
cheers mate
Darrell Brown
0418-954-858
[email protected] -
Hi,
I don't know why but I can't start pulseaudio or alsamixer. I used to be able to start them, but I forgot what I had to do to get them running. I was just using it as a simple volume control when I had it working.
I've tried:
[gulliver@myhost ~]$ pulseaudio --start
E: [pulseaudio] main.c: Daemon startup failed.
[gulliver@myhost ~]$ start-pulseaudio-x11
E: [pulseaudio] main.c: Daemon startup failed.
[gulliver@myhost ~]$ alsamixer
ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
cannot open mixer: Connection refused
[gulliver@myhost ~]$ pulseaudio
E: [pulseaudio] main.c: Unknown command: (eg. when X is not active)
E: [pulseaudio] main.c: Failed to initialize daemon.
[gulliver@myhost ~]$
Verbose isn't any different.
In another thread I read somebody trying. I got a pretty large output.
[gulliver@myhost ~]$ pulseaudio --log-level=4 --log-target=stderr
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 1.1
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.1.5-1-ARCH #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
D: [pulseaudio] main.c: Found 2 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: All asserts enabled.
I: [pulseaudio] main.c: Machine ID is c1b3c15dc26d22642398743300001ac8.
I: [pulseaudio] main.c: Session ID is c1b3c15dc26d22642398743300001ac8-1326592649.892198-2012670361.
I: [pulseaudio] main.c: Using runtime directory /home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-runtime.
I: [pulseaudio] main.c: Using state directory /home/gulliver/.pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-1.1/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-jackdbus-detect.so': success
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-bluetooth-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 7660e9b219ab55868191f04200000028 as :1.18609
D: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
D: [pulseaudio] bluetooth-util.c: Bluetooth daemon is apparently not available.
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #5; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #7; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #8; argument: "").
I: [pulseaudio] module-default-device-restore.c: Saved default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo' not existent, not restoring default sink setting.
I: [pulseaudio] module-default-device-restore.c: Saved default source 'alsa_input.pci-0000_00_1b.0.analog-stereo' not existent, not restoring default source setting.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #10; argument: "").
D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: sink:auto_null (probably pre-v1.0 data)
D: [pulseaudio] module-device-restore.c: Attempting to load legacy (pre-v1.0) data for key: sink:auto_null
D: [pulseaudio] module-device-restore.c: Size does not match.
D: [pulseaudio] module-device-restore.c: Unable to load legacy (pre-v1.0) data for key: sink:auto_null. Ignoring.
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: sink:auto_null:null
I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: device.description = "Dummy Output"
I: [pulseaudio] sink.c: device.class = "abstract"
I: [pulseaudio] sink.c: device.icon_name = "audio-card"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: source:auto_null.monitor (probably pre-v1.0 data)
D: [pulseaudio] module-device-restore.c: Attempting to load legacy (pre-v1.0) data for key: source:auto_null.monitor
D: [pulseaudio] module-device-restore.c: Size does not match.
D: [pulseaudio] module-device-restore.c: Unable to load legacy (pre-v1.0) data for key: source:auto_null.monitor. Ignoring.
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: source:auto_null.monitor:null
I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
D: [null-sink] module-null-sink.c: Thread starting up
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: sink:auto_null:null
I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #11; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-console-kit.so': success
I: [pulseaudio] client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
D: [pulseaudio] module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-cork-music-on-phone" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #19; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-dbus-protocol.so': success
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-x11-bell" (index: #21; argument: "sample=bell-windowing-system").
E: [pulseaudio] main.c: Unknown command: (eg. when X is not active)
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 removed from object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry1
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #4).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #5).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #6).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #6).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #7).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #7).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-gconf" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #8).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #9).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #10).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-null-sink" (index: #11).
D: [pulseaudio] module-always-sink.c: Autoloaded null-sink removed
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device removed from object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink removed from object /org/pulseaudio/core1/sink0
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device removed from object /org/pulseaudio/core1/source0
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source removed from object /org/pulseaudio/core1/source0
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [null-sink] module-null-sink.c: Thread shutting down
I: [pulseaudio] module.c: Unloaded "module-null-sink" (index: #11).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
D: [pulseaudio] module-console-kit.c: Removing session /org/freedesktop/ConsoleKit/Session1
I: [pulseaudio] client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #16).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-cork-music-on-phone" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-cork-music-on-phone" (index: #17).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #18).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #19).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-dbus-protocol" (index: #20).
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 removed from object /org/pulseaudio/core1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module19
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats removed from object /org/pulseaudio/core1/memstats
I: [pulseaudio] sink.c: Freeing sink 0 "auto_null"
I: [pulseaudio] source.c: Freeing source 0 "auto_null.monitor"
I: [pulseaudio] module.c: Unloaded "module-dbus-protocol" (index: #20).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-x11-bell" (index: #21).
I: [pulseaudio] module.c: Unloaded "module-x11-bell" (index: #21).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] main.c: Daemon terminated.
I don't know how to decipher what it's telling me or how to fix it.The lines starting with E are your errors, which tell you what the (perceived from pulse) problem is.
-
I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do. It won't work. I've tried more than several times to get help but nothing helps. Do I need to deauthorize the ipod or perhaps erase all the downloaded ipieta stuff and start over?
Thanks for any suggestionsSorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch. -
Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol). -
IPhoto 11 slideshow music: Can I start music after 1st slide?
Can I start the music at the second slide in IPHOTO 11 slideshow?
No. However, you can add a track of dead air (silence) of a few seconds and use that track with the other track in a custom playlist. You may have to experiment with the length depending on the length of the sideshow if you use Scale to Music. If you set a definite slide display time create the dead air track to that length.
You can use a 3rd party audio editor or Garageband to create the dead air track.
OT -
Imess can't start with cellphone number
I can't start or receive iMess by my cellphone numbers but before I could.
I too presented the same topic earlier this year. In my world, the audio takes priority and syncing the visuals to fit. I copied this shortcut from my previous questions- hope it helps. I haven't made the jump yet to the Pro Software, but still on my wish list. If this shortcut doesn't work, SDMacUser was very helpful with explanations. http://discussions.apple.com/message.jspa?messageID=7824582#7824582
-
I want to start with audio on a timeline and add photos. Why is this not possible in the new confusing version of iMovie?
Yrs,
Unspeakably FrustratedYes, you can do this. Drag the music track to the background and start adding your pictures. A great way to do this is to use beat markers so your photos will change on the beat.
A really fast way to do this is to line up your photos in an iPhoto album in the order you want them. You can drag the whole album into iMovie at once.
Here is a tutorial on the beat marker feature.
Here is a sample of a slideshow made by dragging in the music first, adding beat markers, and then adding photos.
Maybe you are looking for
-
No internet with safari and appstore
Hi, odd enough my mac mini (mid 2011 2.7GHz i7 16GB) with mavericks doesn't like to connect to the internet with safari or software update or appstore. Also no printing over the LAN! Firefox, Mail, Terminal etc are working just fine with their connec
-
How do I changed the background color of a received message?
I have a received e-mail message that has a magenta background along with several images. As I need to print this message, I would like to change that background to white. Is this possible?
-
LDAPv3 Authentication at Login Window in Leopard (10.5.2)
Hi. I'm having a problem with LDAP authentication in Leopard (10.5.2). I'm using an identical configuration to my Tiger set up, but it simply fails at Login Window. So far, I've done the following: 1) Changed the TLS_REQCERT entry in '/etc/openldap/l
-
Connect from Windows 98 to Oracle 8.1 fails
Hi... we are using Power Builder to connect to the Oracle 8.1 DB. It's running under Windows98 and the connect fails every time. Under Win NT 4 it still works fine. Are there some diffrent parameters between win98 & NT? Wich they are, and how do i us
-
ITunes requires 64 bit mode after Mavericks update from Snow Leapard 10.6
Responded to Apple Mail invite to update to Mavericks after checking my Mac and OS were compatible. Followed instructions to Mavericks Install and all went smoothly. Unfortunately, ITunes will not load, it's icon bounces a few times but then provides