Can't start my laptop - file folder with a question mark is on the screen -
what should I do? got my new Macbook only one month ago. now traveling, but can't start up the computer.
You can try a few things, but if they fail then only reinstalling OS X will fix the problem. Try the following:
Delete caches to resolve some startup problems:
Boot into single-user mode. After the system prompt appears enter the following lines pressing RETURN after each:
/sbin/fsck -fy
Once it finishes, it'll display this message if no issue is found:
** The volume (nameofvolume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
*** FILE SYSTEM WAS MODIFIED ***
If this message is returned repeat the command until the OK message is received. If you repeat the command more than seven times without receiving the OK message, then your drive cannot be repaired. Do not proceed beyond this point.
/sbin/mount -uw /
sudo rm -rf /System/Library/Caches/*
You will be asked to enter your admin password. It will not be echoed.
sudo rm -rf /System/Library/Extensions.mkext
sudo rm -rf /Library/Caches/com.apple.ATS
sudo rm -rf /Library/Caches/com.apple.LaunchServices*
sudo rm -rf /Library/Caches/*
reboot
Please write down the above commands carefully as you can create a bigger problem if they are not entered correctly.
Similar Messages
-
When I try to start my computer a flashing file folder with a question mark is on the screen. I can't open anything up. What does this mean?
There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(104258) -
My laptop opened with a grey flashing file folder with a question mark inside it . How do I open my laptop! I have tried force closing several times and restArting nope ! nada! Suggestions?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, 10.8 Mountain Lion or 10.9 Mavericks, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7, 10.8 or 10.9 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
What does it mean when I start my computer and there is a file folder with a question mark?
What does it mean if I start my computer and there is a file folder with a question mark blinking?
That Disk 1/ Mac OS is the install DVD not the hard drive. Your hard drive is not recognized which would mean it's probably dead.
For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/ -
What does a file folder with a question mark in it mean when the computer won't start?
What does a file folder with a question mark in it mean when the computer won't start?
There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
(68976) -
When I start my macbook a flashing file folder with a ? mark appears in the middle of my screen.
When I start my mac book a flashing file folder with a question mark in the middle appears in the middle of my screen.
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
When I went to turn the desktop on, the start up sound came on. Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it. I cannot get it to fully turn on. HELP
Run a disk repair tool on the hard disk or install a new OS.
(59898) -
I have a first gen MacBook pro with intel chip. All of a sudden when I try to start up instead of the apple logo I see a file folder with a question mark. Phone support wasn't much help since it is a older machine. It's either a software issue or the hard drive went. Any ideas on how to fix if it's a software issue would be appreciated. Thanks a lot.
Thanks I tried that and when I click repair it tells me
Invalid volume header
Checking hfs plus volume.
Invalid b-free node size
Volume check failed
Error: the underlying task reported faliure on exit.
1 hfs volume checked
1 volume could not be repaired because of an error. -
My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!
You don't have a Macbook if you are running OS 9 and it's 10 years old. The first Macbook is an Intel Mac that came out in 2006 running 10.4.x. You most likely have a Powerbook. Try posting in the Powerbook forum.
A flashing question mark appears when you start your Mac -
File Folder with a Question Mark Blinking-HELP!!!!
Its been like a day and half since i last used my macbook, and all of a sudden it won't work.
It still turns on but it goes to a white screen and stays that way for about 20 minutes. Then a file folder with a question mark in the middle shows up and blinks. It doesnt go away at all. The only way for me to make it go away is to either turn it off or to push the eject button, and now it just turns off all together.
When all this started happening it took a long time for it to even go to the home page, but it didn't go to the desktop screen. It would take a long time on the screen when it first turns on then a a lonnnnngggg time after that it would go to a light blue screen and then a longgggg time after that a pointer would show up, and thats all it would do.
Do I need to get the software that first came with it and put it in and see if it fixes the problem or what?
WHAT SHOULD I DO?!?!? please help.You have corrupted system files. The following is a solution:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
HT3964 What does a file folder with a question mark that appears upon startup?
What does a file folder with a question mark which appears on startup mean??
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, 10.8 Mountain Lion or 10.9 Mavericks, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 or 10.8 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
Instead of an apple, I get a file folder with a question mark!
Hi. I turned on my MacBook today, and instead of the apple popping on to the screen after a few seconds, I got something that looks like a file folder with a question mark in the middle of it. Then it starts to flash! Turned it off with the power button, tried again a few times...same result. Anyone know what to do? Thanks
If the computer starts up after a brief delay, you probably just need to reselect your startup volume. Choose Apple menu > System Preferences. Click Startup Disk and select the the desired startup volume.
If your computer does not start up, try repairing your startup disk and reselecting your Mac OS X startup volume. Click the link below for the webpage with detailed instructions.
A flashing question mark appears when you start your Mac -
I had to restart my iMac and when it came back on the screen shows a file folder with a question mark. What should I do?
Did you move any system files? It's looking for the system folder. You can startup from the system CD by inserting the CD and restarting the computer and at the same time hold down the C key. The computer will boot from the CD. At that point run the disk utility and check your hard-drive. It the problem persists then do a fresh clean install of the system folder and that should help you get back on track.
Good Luck. -
My iMac is completely unresponsive. Whenever I restart it, it's just a white screen with a flashing file folder with a question mark in the middle. What does this mean?
this means the mac cannot find the startup disc. which more times than not means you need a hdd replacement.
try starting holding the option key, then using utilities try to repair the disc. -
What does a blinking file folder with a question mark indicate?
What does a blinking file folder with a question mark indicate? I cannot get past it or do anything with the unit.
glamiera wrote:
What does a blinking file folder with a question mark indicate?
That's the firmware telling you it can't find the operating system it's been assigned to boot from.
It could be because it forgot somehow, or the operating system is no longer there or readable or the hardware holding the operating system has failed.
Hold the power button to force a hardware shutdown, then reboot holding the option/alt key held down on the wired or built in keyboard, icons will hopefully load on the screen and if OS X appears, click the arrow to boot from it.
Once in OS X, head to System Preferences > Startup Disk and select your boot drive so it can remind the firmware.
If there is no OS X boot volume, just recovery or Bootcamp (if Windows installed) then you need to perform more work.
Create a data recovery/undelete external boot drive
To get a copy of your files off the drive.
Step by Step to fix your Mac
To fix your machine and find out (hardware test) if it's a hardware issue of some sort.
Maybe you are looking for
-
As stated in the title, since I installed iOS6 on my iPod Touch 4G, the HDMI connector that I bought from Apple is no longer supported/recognized... A bit of a problem, when you buy an accessory to be able to watch videos on any HDMI enabled TV.... T
-
Higher level/consolidation numbers not shown in Excel
Can not see consolidation numbers at higher level in Excel sheet. They are showing MISSING. But data for the certain member combinations are for sure loaded and existing in the cube because we can see them from Excel. Any idea about this issue?
-
Dear Experts, We have a scenario where we have set-up our TPM system to calculate Accruals based on ERP Sales Volume. Just for completeness, I will list down the steps: a) Create Trade Promotion in CRM and put that in Releases. Conditions (via Rebate
-
Solution for BO and Oracle EBS
Hi all, I have a customer who use oracle EBS for their ERP solution. now they want to implement BI for their system. 1. Incase I dont use Data Intergrator and data mart so how can BO extract data from EBS? 2. Do I have to build up universes to It Ora
-
Cannot find phones that support sample app
I downloaded the "duece_interface" fla. sample files from this site, opened it up, tried to test it in the flash lite emulator, downloaded the latest device updates extension, and still cannot find any models that support this app. Any clues? thanks.