Can't start Oracle BI Server service after uploadingo RPD

Hi,
I have just installed OBIEE 11g and I have some problems, or I don't know fine 11g version :-)
ONLINE RPD
1) It response with UNKNOWN ERROR in case I would like to add new DATABASE in Physical Layer;
2) The consistency check fail with nQSerror: 37005 Transactional Update Failed
OFFLINE RPD
I deploy without problem, but after uploaded RPD on line and I do start and stop with opmnctl command, the Oracle BI server service still Down ad not Alive. Other services still Alive.
The RPD chek consistency response without error!!!
Please can you help me???
Thx
GIUSEPPE CONZO

The entire file log message is:
//# Copyright (c) 1997-2011 Oracle Corporation, All rights reserved
//# VERSION 1
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-22 11:13:30.142
//# SAVED : 2012-08-22 15:45:03.896
//# END SESSION ChangeLogTimeStamp:2012-08-22 15:45:04.554
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-22 15:51:10.183
//# SAVED : 2012-08-23 09:08:16.877
//# END SESSION ChangeLogTimeStamp:2012-08-23 09:08:19.911
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 09:10:33.007
//# SAVED : 2012-08-23 10:03:51.001
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:03:51.563
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:04:26.237
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:04:37.229
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:05:24.176
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:08:30.691
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:08:45.497
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:08:50.313
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:17:05.808
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:17:11.193
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:20:53.579
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:21:45.639
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:22:33.292
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:22:38.474
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:26:02.480
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:26:10.252
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:28:36.411
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:28:42.221
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:28:57.728
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:29:50.166
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:30:08.406
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:30:13.433
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:35:06.181
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:35:12.237
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:36:52.816
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:49:15.696
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:50:17.050
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:50:22.617
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:52:19.294
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:54:52.161
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:59:48.588
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:03:35.447
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:04:46.787
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:21:09.629
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:21:27.020
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:25:23.819
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:30:03.133
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:35:25.779
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:35:57.415
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:50:50.490
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:51:08.165
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:52:21.261
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:52:36.061
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:53:52.961
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:56:02.026
//# END SESSION ChangeLogTimeStamp:2012-08-23 12:16:59.915
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:17:11.915
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:17:18.767
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:17:34.227
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:52:33.344

Similar Messages

Can't start 9iAS-Management server service in Win2000 pro

After install 9ias, I can't start Management server service. I got error emssage 'Could not start the OracleOra9ias_HomeManagement server service on local computer. Error 1053: The server did not respond to the start or control request in a timely fashion' Please assist me how can I do. Thanks in advance.

I can do now by reinstall 9iAS with select management server.

Help me! why can not start oracle management server?

maybe for my shutdown and startup database abnormal for several
times,now the server oracleorahome81management server can't start
and while i logon to enterprise manager console,it show me a
error as follow
"vtk-1002:The Oracle Management Server you are trying to connect
to is still in the process of initialization. Please wait for it
to start up completely and then try logging in again"
the error also when i restart my machine.
and,the configuration assistant can not logon to database.
but sql*plus,sql worksheet can work normal.

Hi,
Sock Hoon (guest) wrote:
: I have just installed Oracle Application Server (OAS) on my
: machine running Windows NT 4.0 Workstation. When I logon to the
OAS don't run on Win NT with installed service pack 4.
Go back to service pack 3 or apply patch from Developer 6.0 to
OAS.
: OAS manager and tried to start ORB, I got below error message:
: Please wait while the command is being processed on host ssoh_x
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: Starting ORB processes...Returning filename D:
: \orant\orb\admin\.event
: waiting for ORB to be ready...
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: ORB is not responding. Please restart manually...
: I have tried to re-install OAS for the second time. But I still
: got the same problem.
: I plan to use the OAS, together with Oracle Internet Commerce
: Server (ICS) to develop an e-commerce project. I am yet to
: download and install the ICS. I don't have any Oracle databases
: installed in my machine. I'm using MS SQL Server 7.0 instead.
: Please advised me on how to configure the ORB so that I'll be
: able to start the application server.
Best regards Andrew
null

Cannot start Oracle BI Server Service

I had installed Oracle Bussiness Intelligence 10g Release 2 version on my system....I was able to generate reports properly with the Default Repository(SH)....But When I created an OLAP repository and loaded it....It worked fine for a few minutes....then BI server service was automatically stopped....later when the service was restarted,it worked for 5 min but agin it got automatically stopped....but on attempting to restart the service again I got a error message ERROR 1068: Service cannot be be started because groups or dependencies not loaded....How can I reinstate the server process? I tried changing the repository to the default one but it didn't work....
Edited by: user10422576 on Oct 19, 2008 11:42 PM

I have seen similar errors when the repository is corrupt. Are you able to open the repository in offline mode ? In online mode, when you check consistencies, does it pass or does it throw any errors ? Also check the log files. if you are not getting enough information, try changing the loglevel for that user and then try it. usually this gives a good amount of info to debug.
Good Luck.
Dinesh Veera

Can not Start Oracle Application Server ORB process

I have just installed Oracle Application Server (OAS) on my
machine running Windows NT 4.0 Workstation. When I logon to the
OAS manager and tried to start ORB, I got below error message:
Please wait while the command is being processed on host ssoh_x
YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
Starting ORB processes...Returning filename D:
\orant\orb\admin\.event
waiting for ORB to be ready...
YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
ORB is not responding. Please restart manually...
I have tried to re-install OAS for the second time. But I still
got the same problem.
I plan to use the OAS, together with Oracle Internet Commerce
Server (ICS) to develop an e-commerce project. I am yet to
download and install the ICS. I don't have any Oracle databases
installed in my machine. I'm using MS SQL Server 7.0 instead.
Please advised me on how to configure the ORB so that I'll be
able to start the application server.
null

Hi,
Sock Hoon (guest) wrote:
: I have just installed Oracle Application Server (OAS) on my
: machine running Windows NT 4.0 Workstation. When I logon to the
OAS don't run on Win NT with installed service pack 4.
Go back to service pack 3 or apply patch from Developer 6.0 to
OAS.
: OAS manager and tried to start ORB, I got below error message:
: Please wait while the command is being processed on host ssoh_x
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: Starting ORB processes...Returning filename D:
: \orant\orb\admin\.event
: waiting for ORB to be ready...
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: ORB is not responding. Please restart manually...
: I have tried to re-install OAS for the second time. But I still
: got the same problem.
: I plan to use the OAS, together with Oracle Internet Commerce
: Server (ICS) to develop an e-commerce project. I am yet to
: download and install the ICS. I don't have any Oracle databases
: installed in my machine. I'm using MS SQL Server 7.0 instead.
: Please advised me on how to configure the ORB so that I'll be
: able to start the application server.
Best regards Andrew
null

Error while starting Oracle Management server service

Hi all,
We are about to administer our database using Oracle Enterprise manager. For that we have configured OEM in a Test PC and tried to connect our database.
First i have logged in to OEM Console with Sysman login id using the default password "oem_temp" and it prompts me to change the password, also i have changed the password as "xxxxx" and i have come out of OEM console and tried to relogin using the changed password.
i got the message as invalid login or password or
check for the availablity of Management server service"
i found that the service Oracle Management server which was previously running is not running now and i tried to restart that manually.
On doing that i got a message as
"Error 1053: The service did not respond to the start or control request in a timely fashion"
Would any one of u help me to solve this problem.
Thanks in advance..

Hi-- could you please describe your administrative domain?
I need to know the operating systems on each of the
clients and the OSB admin server. Also, does 'obtool' CLI
tool work? Do any of the machines act as an apache webserver
for another application? Is there any other backup service
running on any of the machines?
thanks,
Judy
I noticed that when re-installing the OSB without the
Administrative Server (only Media Server and Client)
I got no errors at all (but still cannot connect from
another Administratice Server to my machine)

Cannot start the SQL server service after you install Active Directory

Good Morning,
Im the system admin for a small company. We have a dedicated domain controller but it is the only one. To get a second domain controller up and running on our domain, I installed the AD role on our file and SQL server. After the reboot
we couldnt get SQL up and running. I found this article
http://support.microsoft.com/kb/929665
In the article it reads
To work around this issue, repair Windows Internal Database. To do this, run the following command line at a command prompt:
Msiexec /i SSEE_10.msi CALLERID=OCSetup.exe REINSTALL=ALL REINSTALLMODE=omus /qn REBOOT=ReallySupress /l*v <var><Log_File_Path></var>
My question is what is the Log_File_Path? Is that where I installed the AD log path?
My DBA is also looking into this as well.
Thanks in advance,
Brian
Brian Fink, MCSE

Hi Brain,
what's version of SQL Server that you have installed and what's your operationg system version info?
If you are running SQL Server 2008, which is not supported on the Windows Server 2008/2008 R2 domain controll (DC), even on Windows Server 2003 DC, there are limitations. Microsoft does not recommend to install SQL Server instances and DC on the same server,
for more information, see Install SQL Server on a Domain Controller (http://msdn.microsoft.com/en-us/library/ms143506.aspx#DC_Support).
There are some threads in the forum talked about installing SQL Server and DC on the same server, here are some for your references:
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/1a2963ff-90d7-4bba-97ce-fa15f70fb6a8/
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/981ef726-d04a-4063-8008-cc7bbad854ab/
Hope this helps. Please feel free to let me know if you have more questions.
Best Regards,
Chunsong Feng [MSFT]
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Oracle Forms Server Service cannot start by scripts (windows2k)

We have a Portal & Application Server installed (Forms&Reports 6i).
Server is Windows2000.
I have to start Oracle Forms Server service by scripts, when i manually start the process by pressing start or stop, it works & asks for nothing.
but when i write a script to stop & start oracle forms server , it stops by script.
but it fails to start & says FRM-60009 : ifsvr60 correct usage : -install [service name] exc..... so service doesnt start but when i go to services & start it manually by presing start , it starts. I dont want to install a new service just stop & start the engine.
How can i start the forms server service by a script ? (any of known commands or a way to Oracle forms server service to start by scripts ?)
Thx for Help..

Hi
Have you checked that the rpd file still exists in the Repository folder? Did you leave it in a consistent state? assuming the paint.rpd is still there, double click it and see if you can open it, if so run a consistency check.
Rgds
Ed

Unable start my OBIEE server Services

Hi,
When i stop and start by OBIEE server service, after replacing the new rpd file, i am getting an application error::
The instruction at "0x6fd6293d" referenced memory ar "0x00000010". The memory could not be "Read"
After clicking on OK throwing an error:
error 1053 the service did not respond to the start or control request in a timely fashion
The server is getting restarted if i place with an other rpd file. The NQServer log is also not having any traces of aborting below are last lines of the server log.
2009-07-31 21:48:24
[14056] Finished loading subject area: eDART.
2009-07-31 21:48:24
[14055] Loading subject area: Moto SRT ...
2009-07-31 21:48:29
[14056] Finished loading subject area: Moto SRT.
2009-07-31 21:48:29
[14055] Loading subject area: LCOM KPI ...
2009-07-31 21:48:29
[14056] Finished loading subject area: LCOM KPI.
2009-07-31 21:48:29
[14055] Loading subject area: DUMMY BMM for New Projects ...
2009-07-31 21:48:29
[14056] Finished loading subject area: DUMMY BMM for New Projects.
Finally it is not aborted.
Tried to run it mannualy
Oracle BI Server starting...
Destroying a lock while it is still owned by a thread.
Current Owner thread id: 3364 (0xd24)
Current thread id: 3720 (0xe88)
Lock pointer: 0x6DE6B35C
Lock created in file: .\Source\NQSQueryEnvironment.cpp
Lock created on line: 60
Lock created in function:
Error in file: .\NQThreads\SUGCriticalSection.cpp
Error on line: 138
Error in function: NQCriticalSection::~NQCriticalSection
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Edited by: Chenna on Jul 31, 2009 9:30 AM

Hi Could you please let me know whether your issue got resolved with out taking new catalog file from source system....

Need Help on Oracle BI Server Service

Hi there,
I would need help on to start Oracle BI Server service start.
I have installed OBIEE 10.1.3.4 version and I've been working on creating repository and creating Answers & Dashboards etc..,
Today, I was working on to point other repository in NQSConfig.INI file and when I tried to Start Oracle BI Server Service I get below error:
" *Could not start the Oracle BI Server service on Local Computer*
*Error 1064 An exception occurred in the service when handling the control request*"
It's been working, just I got this error today only, all other services are working fine.
Has anyone got this error?
Any help would be greatly appreciated.
Thank you
Skat
Edited by: Skat on Nov 10, 2009 8:07 PM

Hi All,
Thank you so much for all your quick replies and it worked now.
You are right, I changed repo name and changed back to original one and and Service is starting now.
I think something missing space or format issue when I add other entry in the NQSconfig.INI file, Ihave to follow same synatx.
Now I am good to go.
Thanks again,
skat

Can not start/stop fullfilment server after fresh install

Can not start/stop fullfilment server after fresh install
Product: e-business suite (11.5.9)
Platform: Win XP 5.1 (SP2)
We have performed a new installation of ebusiness suite in our windows platform.
Installtion went with out any problem.
But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
script returned:
C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
You are running jtffmctl.cmd
Mon 13/09/2004
01:46 PM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
"Error returned while running OUI"
ERRORCODE = 1 ERRORCODE_END
.end std out.
Class not found: oracle.apps.jtf.fm.engine.processor.Processor
Please let us know how to fix this issue.
Regards, Kunal

edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

Oracle Management Server Service not created

Hello,
I created a Management Server Repository using OEMCA and an existing SID. According to the details displayed at the end of the wizard I assume that the process was finished successfully:
(NT-Service OracleOraHome81 ManagementServer is started...
Disconnect from oms@instancename....
Returning to connection system@instancename...
Process finished.
Yet the Oracle Management Server Service can not be found in SERVICES in the control panel...and therefore can't be started manually.
I have OS-Administrator Privileges.
I use Oracle 8.1.7 on WinNT.
Any help would be greatly appreciated.
Thanx
Stefan

I have this problem too. (posted a separate thread on
this before I read this one, sorry).
Here is my oms.nohup:
E:\oracle\ora81\sysman\log>tail -f oms.nohup
[main][2003-10-9:18:7:57:599] ORA-01017: invalid
username/password; logon denie
d
: ..../....@jdbc:oracle:oci8:@exorabsp
[main][2003-10-9:18:7:57:599]
VdbSession.processError: invalid connect string
VXA-2018 :
Anmeldung bei OMS-Registrierungsdienst nicht m�glich
oracle.sysman.vxn.VxnBootstrapException:
at
at
at
t
oracle.sysman.vxa.VxaAppServer.startServices(VxaAppSer
er.java:1353)
at
at
at
t
oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:
547)
Fehler beim Hochfahren von Oracle Management Server.
Somehow, by reading the responses here - created new repository - I managed to get OMS working again.

Start Oracle Application Server in Debug mode

We have oracle application server 10g with oc4j. How do we configure App server to start in debug mode so remote debugging from different machine can be done.
I am new Oracle Application Sever. OC4j is java container and it starts automatical when ORacleAServer starts.
Thanks,
MS

MadanShah, how did you start Oracle Application server? Let us say, you start it with opmnctl. In order to do java remote debugging with the oc4j process inside the OAS, you have to add the java remote debugging option to the "java-options" in the $ORACLE_HOME/opmn/config/opmn.xml.
<ias-component id="OC4J">
<process-type id="home" module-id="OC4J" status="enabled">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5050 -Xrs -server -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true"/>
</category>
The "-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5050" is what I added. After starting OAS, you can connect to the oc4j process by selecting port 5050 using a java remote debugger that is included in any major IDE, like Jdeveloper. For more information, search for "remote debug" in the online help of Jdeveloper.

Can't start Oracle Directory Manager

Hi,
I have installed and configured OID in OFM11g, but I have no idea how to validate it. I am not sure whether I configured it successful.
I have installed identity server 10.1.4.3.0 refering to link . It said that if I installed it successful, I can start OAM Identity Server service ( [step 18|http://www.oracle.com/technology/obe/fusion_middleware/im1014/ovd-oam/oam-ovd/install_oam/install_oam.htm#t2] Start -> Control Panel -> Administrative Tools -> Services, right-clicking the Oracle Access Manager Identity Server (identity) service, and selecting Start.) However, when I start the service, I can't see Oracle Directory Manager ( [step 19|http://www.oracle.com/technology/obe/fusion_middleware/im1014/ovd-oam/oam-ovd/install_oam/install_oam.htm#t2] ). Actually, nothing happened.
When you completed the installation of Identity Server, could you open the Oracle Directory Manager ?
Your help is appreciate.
Best,
Sunny.Zhang
Edited by: Sunny.Zhang on 2009-10-4 上午10:21

Hi,
You can validate OID installation through 'opmnctl' and/or 'ldapbind'. You can access 'Oracle Directory Services Manager' through a browser using the url -
'http://<host>:<port>/odsm/faces/odsm.jspx'.
Here is a link which shows screenshots of the overview of 'Oracle Directory Services Manager'.
-- Pramod Aravind

How can i start oracle databases? i am using Oracle 8.1.6 for linux.

when i run dbstart,it gives me following message:
Database "ora4cweb" warm started.
but when i use sqlplus,it says:
ORA-01034: ORACLE not available
i made a mistake ,i shutdown my linux before i shutdown oracle databases,how can i start oracle databases now?thanks in advance.

try it without the scripts...
login to linux as oracle
start server manager
svrmgrl
connect internal
startup
select sysdate from dual;if that works
exitcheck listener
lsnrctl
statif nothing running type
start
exitnull

Can't start Oracle BI Server service after uploadingo RPD

Similar Messages

Maybe you are looking for