Can't start quanta plus[SOLVED]

Hello, I'm having problems on starting quanta plus on my arch linux box...When i clicked on its link it just shows on my task bar and no window or whatsoever occurs or runs...:/ Am I missing something?
Thanks
Last edited by kaola_linux (2008-11-25 15:11:39)

Ghost1227 wrote:Run it from terminal and post any output/errors you get... the more info you can give us, the more likely someone can come up with a solution.
Thanks for the fast rep. Here's what I get
[kaola@localhost ~]$ quanta
quanta: error while loading shared libraries: libcvsservice.so.0: cannot open shared object file: No such file or directory

Similar Messages

Can not start SQL Plus

Hi friends
I have installed oracle 9i on windows XP successfully.
I can't start SQL plus, i am typing scott as username and tiger as password then it gives me TNS protocol error.
Please help me, how shall I fix this problem.
Thanks
Harish

the service might not exist yet in the services panel. you'll have to execute the following command from the server where Oracle is installed:
c:\> lsnrctl start
You should receive a series of messages about the listener starting. Then re-check the services as described above and you should see it there.

Why my KDM can not start kde4.2[SOLVED]

I install kde and xorg .but the KDM can not start my kde ,I input my username and passworld ,but i not work
use gdm instead ,it works. how shoule I do to make the KDM work .
Last edited by wenzi_lee (2009-04-07 04:37:40)

guansito wrote:
Hello again.
That doesn't work for me! I have already installed hal and fam, but kdm still doesn't log me in kde4.
I ran "startx" from my user prompt, and i can use kde now, but when I ran kdm as root, I can log in.
quarkup, here is the output.
[~]$ ls -la .*authority
-rw------- 1 juan users 54 Feb 7 17:31 .Xauthority
I supposed that i have to configure kdm, i was looking for more information when i saw this post.
that's ok..
the .ICEauthority was the file which needed a chown/chmod to let me go into kde.. but it's ok i guess, since you don't have it.
mine is somehow like this:
~$ ls -la .*authority
-rw-rw---- 1 quarkup quarkup 64K Fev 2 13:20 .ICEauthority
-rw------- 1 quarkup root 1,4K Fev 7 21:55 .Xauthority
> KDM must be configured to allow the "root" user to access the X11 session - in: systemsettings > Login Manager > Users(6) (root account has the uid=0)
hope it helps you.
I don't really use the root account for anything, only the very necessary stuff..

ISQL*PLUS service can't start

Hello,
I installed Oracle 10g on Windows XP, SQLPlus is OK, but I can't start iSQL*Plus service. Please help me how to fix this problem.
Thks a lot.
Best regards,
Kim Hung

What error message is returned when You try to start it?
Additionaly You can read Metalink note 400812.1 - How to Create iSQL*Plus Service after Software Only Install on Windows Machine
And Metalink note 334695.1 is usefull as well.

After my windows 7 update, Thunderbird can't start correctly, how to solve?

After my windows 7 update just now, Thunderbird can't start correctly, it says not responding.
How can I fix this? or at the least rescue my data.

Solved !
this problem was caused by another application not working correctly.
(plex media server)

[solved]can't start gnome as user

I can't start gnome as user only as root.
error message: failed to create file /tmp/gconf-test-locking-file-kx6h6t:Permission denied (error=13)
I think this is an pacman error (permissions)
I made an clean install because last pacman -Syu crash my os.
And i get the error as above so i can't get it to work.
I also tried to run enlightment but several applications don't start.
How to solve this?
Solution was i wiki :chmod 1777 /tmp
Last edited by fernux (2008-02-11 20:39:41)

error message: failed to create file /tmp/gconf-test-locking-file-kx6h6t:Permission denied (error=13)
this is the problem, it states that it can't create a file because of a lack of permissions to do so. Its trying to create the file in /tmp, so that tells us that /tmp directory has permissions that aren't correct or gnome would work. What u need to do is
ls -ld /tmp
and post the results here so someone can tell u how to put the correct permissions up.
edit: I see u found the answer yourself.
Last edited by jacko (2008-02-11 20:42:30)

[SOLVED] Can't Start MySQL after upgrading to 5.1.41-3

I can't start mysqld with 'mysqld start'.Here is my mysqld output:
[ahao@sky ~]$ mysqld start
091125 18:33:48 [Note] Plugin 'FEDERATED' is disabled.
091125 18:33:48 [Note] Plugin 'ndbcluster' is disabled.
091125 18:33:48 InnoDB: Started; log sequence number 0 44233
mysqld: Too many arguments (first extra is 'start').
Use --verbose --help to get a list of available options
091125 18:33:48 [ERROR] Aborting
091125 18:33:48 InnoDB: Starting shutdown...
091125 18:33:49 InnoDB: Shutdown completed; log sequence number 0 44233
091125 18:33:49 [Note] mysqld: Shutdown complete
This is my /var/lib/ complete with permission settings:
[ahao@sky ~]$ cd /var/lib ; ls -al
total 84
drwxr-xr-x 20 root root 4096 2009-11-25 18:08 .
drwxr-xr-x 13 root root 4096 2009-11-25 13:51 ..
drwxrwx--- 2 root policykit 4096 2009-05-10 09:10 PolicyKit
drwxr-xr-x 2 policykit root 4096 2009-05-10 09:10 PolicyKit-public
drwxr-xr-x 3 root root 4096 2009-09-19 12:19 bluetooth
drwxr-xr-x 2 root root 4096 2009-09-16 22:09 dbus
drwxr-xr-x 2 root root 4096 2009-11-23 17:38 dhcpcd
drwxrwxrwt 2 root root 4096 2009-07-19 18:17 ex
drwxr-xr-x 2 root root 4096 2009-09-16 22:38 hwclock
drwxr-x--- 2 root locate 4096 2009-10-22 06:55 locate
-rw-r--r-- 1 root root 462 2009-09-20 00:02 logrotate.status
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 misc
drwxr-x--- 2 root locate 4096 2009-11-25 18:09 mlocate
drwxrwxrwx 4 mysql mysql 4096 2009-11-25 18:33 mysql
drwxr-xr-x 6 root root 4096 2009-09-07 08:54 nfs
drwxr-xr-x 4 root root 4096 2009-11-25 18:08 pacman
drwx------ 3 root root 4096 2009-11-21 03:30 polkit-1
drwxr-xr-x 2 root root 4096 2008-09-06 14:33 rarian
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 syslog-ng
drwxr-xr-x 3 root root 4096 2009-10-19 20:10 wicd
drwxr-xr-x 2 root root 4096 2009-11-21 02:35 xkb
/etc/mysql/my.cnf is out-of-the-box
What seems to be the problem here? Please shed some light...thank you
Last edited by akiglobal (2009-11-26 07:41:00)

How silly of me.....first of all...I entered 'mysqld start', I should have just entered 'mysqld', second of all, I didn't change the file permission on /var/run/mysqld. I change /var/run/mysqld file permission into 'chmod 777 /var/run/mysqld -R', after that mysql works!

[Solved] Can't start GParted from XFCE menu

Hi,
I have polkit installed but I can't start GParted from the XFCE menu. Do I need to edit any configuration files to make this work? The wiki isn't very clear about what to do after installing polkit. Thanks.
Last edited by kaixi (2012-11-02 15:09:12)

In my Xfce4 installation, it's /usr/share/applications/GParted, which I copied over to ~/.local/share/applications/, as kaixi suggested, and it appeared there as gparted.desktop. Right-click for Properties > Launcher > Command, and in that field (not wanting to install gksu) I put sudo gparted, which works, thanks.

Can't start KDE applications after update to KDE 4.9 [SOLVED]

After updating to KDE 4.9, I can not start systemsettings, kwrite, konversation, digikam or any other KDE application using krunner or from a shell. Non-kde applications starts fine. Any help deeply appreciated!
Last edited by sredna (2012-08-09 15:10:14)

I got no messages on the terminal, and restarting KDE or even rebooting did not help. But killing some stale processes did, so now I just wonder where those came from...
Thanks for your help anyways!

[SOLVED] Some systemd processes (e.g. systemd-journald) can't start.

After a fresh install on a new laptop (dual boot with Windows 8.1 vie rEFInd) I notice some error messages whilst booting. systemd-journald fails to start, and I also see some errors relating to the creation of the volatile filesystem. It's hard for me to give a lot detail about this as without journaling as I'm not sure how to get the error messages.
I did see this from dmesg:
[ 128.638674] systemd[1]: Starting Stop Read-Ahead Data Collection...
[ 128.662550] systemd[1]: Started Stop Read-Ahead Data Collection.
[ 194.545294] systemd[1]: Starting Journal Socket (/dev/log).
[ 194.545391] systemd[1]: Listening on Journal Socket (/dev/log).
[ 194.545471] systemd[1]: Starting Journal Socket.
[ 194.545540] systemd[1]: Listening on Journal Socket.
[ 194.545613] systemd[1]: Starting Journal Service...
[ 194.546604] systemd[1]: Started Journal Service.
[ 194.549797] systemd-journald[711]: Failed to get machine id: No such file or directory
[ 194.553931] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 194.554205] systemd[1]: Stopping Journal Service...
[ 24.362121] systemd-tmpfiles[330]: [/usr/lib/tmpfiles.d/systemd.conf:26] Failed to replace specifiers: /run/log/journal/%m
[ 24.364106] systemd-tmpfiles[330]: [/usr/lib/tmpfiles.d/systemd.conf:29] Failed to replace specifiers: /var/log/journal/%m
[ 24.404888] systemd[1]: systemd-tmpfiles-setup.service: main process exited, code=exited, status=1/FAILURE
[ 24.409499] systemd[1]: Failed to start Create Volatile Files and Directories.
[ 24.412303] systemd[1]: Unit systemd-tmpfiles-setup.service entered failed state.
And if I check the status of journald through systemctl I get:
systemd-journald.service - Journal Service
Loaded: loaded (/usr/lib/systemd/system/systemd-journald.service; static)
Active: failed (Result: start-limit) since Wed 2014-08-27 10:37:50 UTC; 1h 2min ago
Docs: man:systemd-journald.service(8)
man:journald.conf(5)
Process: 720 ExecStart=/usr/lib/systemd/systemd-journald (code=exited, status=1/FAILURE)
Main PID: 720 (code=exited, status=1/FAILURE)
Status: "Shutting down..."
I've tried reinstalling systemd, and adding systemd to HOOKS in mkinitcpio.conf, neither of these things seem to help. I also can't start the services manually.
If anybody can help it would be greatly appreciated, thanks!
Last edited by Tim Butters (2014-08-28 15:49:50)

Normally, as Loqs said, 'systemd-firstboot --setup-machine-id' should have been run when you first installed the systemd package.
You can verify if the '/etc/machine-id' file exists:
$ ls -l /etc/machine-id
-rw-r--r-- 1 root root 33 25 mars 2009 /etc/machine-id
If you don't find one, maybe use 'systemd-machine-id-setup' instead to create one.
But have you seen error messages during the Arch installation? Because that should not be necessary.
Edit: 'systemd-firstboot' is new in systemd 216, so should not be found in the live installation disk 2014.08.
Last edited by berbae (2014-08-28 15:44:52)

[SOLVED] kdemod with ugly cyan boarders / can't start kdm at boot?

I followed the directions to install kdemod from a clean installation of Arch Linux. Specifically I:
Installed from CD
Setup DHCP and configured my ethernet
Updated Arch Linux ( pacman -Syu )
Installed xorg
installed hdw and configured xorg
setup repositories to include kdemod repos
installed kdemod, as well as some recommended additions
if I follow any of the directions here ( http://chakra-project.org/download-kdemod-step6.html ) to start kdemod at boot then it gives me a login prompt but immediately crashes and restarts kdm whenever I login. I can only get into kdemod by typing, in the console: startx
and then: startkde
...and then all of my windows are surrounded by ugly monotone cyan window decorations which look like they came out of Windows 3.1 that I can't seem to get rid of, as well as a few other oddities involving the color cyan.
I am, incidentally, running it in VirtualBox with the vesa video driver in xorg.conf.
Does anyone know what's going on? Am I missing something? Is this normal?
I've found one mention of this problem on the forums before [ http://bbs.archlinux.org/viewtopic.php?pid=494261 ] but no solution. Thanks in advance.
Last edited by thorjelly (2009-02-15 03:48:05)

Alright, I figured out where those ugly cyan borders come from. It's because I didn't make an .xinitrc file in my user's directory and specify what window manager to use, so it defaulted to xterm, and I was running kde through xterm and the borders were xterm's window borders (Right, well, I figured they were a biproduct of running kde in such an unusual way)... but I still don't know why I can't start kdm at boot. Anyone know how I can figure that out...?
Last edited by thorjelly (2009-02-15 03:35:44)

How can I start a client Application from a procedure?

Hello, can someone help me to solve this problem?
I've written a client Application.(just one file Client.java) Then I created a .jar file for my applicaiton component and loaded it to the server using loadjava. (MyExample.jar)
It should be invoked by a procedure, which I've created.
create or replace procedure TEST as language java name 'MyExample.main(java.lang.String[])';
But when I want to start it in the SQl*Plus using "call TEST();", I received the message:
Executing PL/SQL: CALL COSMOS."JDEV_TMP_PROC_1"()
ORA-29541: Klasse COSMOS.CompUpdateClient konnte nicht aufgelöst werden
ORA-06512: in "COSMOS.TEST", Zeile 0
ORA-06512: in "COSMOS.JDEV_TMP_PROC_1", Zeile 3
ORA-06512: in Zeile 1
Process exited.
Can someone tell me why and how I can solve it?
Thanks
Lucia

As Andrew suggested, it might be an issue with broken java installation on your system.
You could try performing following steps to see if you get similar results. This will verify if there is something with your java installation or something to with the way you coded your java class(es).
(since you did not post the code, I'm not sure which one might be a problem.
SQL> create or replace and compile java source named "Hello" as
2 import java.lang.* ;
3 import java.util.* ;
4
5 public class Hello
6 {
7    public static void Say()
8    {
9     System.out.println("Hello World in Java!") ;
10    }
11 }
12 /
Java created.
SQL>
SQL> create or replace procedure Hello_Java is
2 language java
3 name 'Hello.Say()' ;
4 /
Procedure created.
SQL> show errors
No errors.
SQL>
SQL> set serveroutput on size 100000
SQL> exec dbms_java.set_output(100000) ;
PL/SQL procedure successfully completed.
SQL> exec Hello_Java ;
Hello World in Java!
PL/SQL procedure successfully completed.
SQL>

How to start OracleOraDb10g_home1iSQL*Plus service from command line (PC)

After installing 10G, I now have a service with this name: OracleOraDb10g_home1iSQL*Plus
I need to be able to start/stop the service from windows 2000 command line,
BUT "net start OracleOraDb10g_home1iSQL*Plus" DOES NOT WORK.
Adding quotes around the service name does not solve the problem either.
Both attempts give "The service name is invalid" errors.
Can anyone provide a solution?
THANKS!

Sorry, but none of the suggestions works. Thanks for trying though.
1) Renaming the service only changes the display name, and then when you use "net start", it errors with: "The service name is invalid"
2) call isqlplus start errors with "isqlplus is not recognized as an internal or external command..."
3) You cannot execute isqlplussvc.exe directly either.
Any more suggestions?

I can not start secion in creative cloud from a macbook

I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
En español.
No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
we want a valid and positive response

Hello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
Please let me know if you are successful or not.

Problem in starting SQL*PLUS in oracle database 10g

Hi
Well I am facing one problem while starting SQL*PLUS in oracle database 10g
ERROR - "Procedure entry point longjmp could not be located in dynamic link library orauts.dll"
This has happened when I installed Oracle Database 11g on same machine and when I deinstalled Oracle 11g then SQL*PLUS is started...no error came
Can anybody tell me the reason please...

hi
pls im having the same problem but in my own case i installed oracle apex using 11g.
im env variable is:
C:\Oracle\product\10.1.0\Client_1\bin;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin\client;C:\Oracle\product\10.1.0\Client_1\jre\1.4.2\bin;C:\app\Xty\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;;C:\Program Files\TortoiseSVN\bin;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\
pls which is my apex_home so i can interchange it?
i also have oracle 10g client installed

Can't start quanta plus[SOLVED]

Similar Messages

Maybe you are looking for