Can't start second VBExample instance

when start second VBExample instance throw error initializeation failed. Unable to create registry on port 2199, I guessed Unable to start a service on the same port

Those services were running before ?
Joel Pérez
http://otn.oracle.com/experts

Similar Messages

Can i start only Java Instance

HI,
I installed both JAVA+ABAP stack in Nw2004s.can i start only Java STACK(java instance) with out starting the ABAP instance from SAP MMC

Hi Surya,
Under normal circumstances the persistence store for an ABAP+JAVA stack is the ABAP system, therefore, your system may not work without the ABAP stack. If you need just the java stack, I would recommend that you install a JAVA only system.
Sajit

EhP5 Install Failed in START_SHDI_FIRST - can't start the shadow instance

We are in the process of upgrading our ERP system from EhP4/NW701 to EhP5/702. The current phase is MAIN_SHADOW/START_SHDI_FIRST. SAPehpi is having problem starting the shadow instance. We tried to manually stop and start it as well, but of no help. The log files 'STARTSFI.LOG' and 'DEVTRACE.LOG' don't seem to provide any useful information. I looked through the files under the work directory for the shadow instance and still couldn't find any helpful information. Where else should I look? Please help!
Thanks,
Jonathan Yun

Hi Srikishan,
Thanks for your reply. dev_disp didn't show much helpful information. However, dev_w0 did show error that I didn't except to see.
Do you know if EhP5 installation require oracle 11g client to be installed?
We ran into a problem at the beginning of the installation where /usr/sap/put/EHPI/abap/exe/dboraslib.o couldn't be loaded because it was looking for symbol strcat. We did a dump of the header for it (dboraslib.o) and saw it reference oracle 11g client so we put the 11g client libraries out there for it to reference but didn't officially install it and change the libpath for the original system. And now, dev_wo is complaining about not able to load /usr/sap/put/EHPI/abap/exe/dboraslib.o because it couldn't find strcat from the 10g client. I tried manually changing the libpath so the 11g client path appears before the 10g client path and stop and start the shadow instance manually. However, no matter what I set the libpath to, the error is the same.
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/put/EHPI/abap/exe/db
oraslib.o") FAILED
"     0509-130 Symbol resolution failed for /usr/sap/put/EHPI/abap/exe/dborasl
ib.o because:
        0509-136   Symbol strcat (number 149) is not exported from
                   dependent module /oracle/client/10x_64/instantcl" (errno=8,E
xec format error) [dlux.c       445]
B *** ERROR => Couldn't load library '/usr/sap/put/EHPI/abap/exe/dboraslib.o'
[dbcon.c      5632]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1487]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thx
xhead.c   11295]
Thanks,
Jonathan Yun

How can I start two FF instances under two Windows accounts at once w/o -no-remote? I need to be able to send URLs to them.

I have one FF (36.0) installation and two Windows user accounts: one for work (w/o internet access but with access to domain resources like JIRA) and one for internet access (w/o access to local resources). I need two instances of FF running at the same time with different resources.
I've created profiles with different names under both accounts and specify profile names using -p parameter. However when I try to start both instances of FF (second one is started via RUNAS), second instance can't be started, new tab in already running instance is opened instead:
firefox.exe -p profile
runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i"
When I start one of them with -no-profile, I can start both at once... but when I try to execute firefox.exe with an URL in order to open a tab with this URL in one of running instances (local URLs I open by starting firefox.exe under work account and remote URLs I open by starting FF via RUNAS), it can't sent URL to already running instance of same user, it always sends URLs to an instance that is runnung w/o -no-remote.
firefox.exe -p profile -url "url"
runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i -url \"url\""
So, I need to have two instances under two different Windows user accounts, and when firefox.exe is started again, it should only communicate with instance that is running under same user account, it must not communicate with instance that is running under different Windows account.

''guigs2 [[#answer-699118|said]]''
<blockquote>
https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options#-no-remote
This feature was removed and unfortunately I do not have any ETA or work around for this.
</blockquote>
It was the different '''-remote''' switch that was removed and not the '''-no-remote'''
https://www.mozilla.org/en-US/firefox/36.0/releasenotes/

Can't start Directory Server instance

I just installed DSEE 6.2 and DSCC on a SPARC based Solaris 10 server. After following the Sun installation guide and accessing the DSCC panel, I tried to start a directory server instance. After entering all of the parameters, I cannot get the server instance started due to the following error.
Could not contact the DSCC agent on ldap. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11162.
After this I verified the that cacaoadm was in fact running and operating on port 11162. I then tried changing the port numbers, and received the same error (although on a different port number). Can anyone advise me on a course of action to get this directory server up and running?
Thanks

Here is the dir listing:
-rw------- 1 nobody nobody 0 Oct 28 20:37 import
-rw------- 1 nobody nobody 16384 Oct 28 20:37 NetscapeRoot_uniquemember.db3
-rw------- 1 nobody nobody 41 Oct 28 20:37 DBVERSION
-rw------- 1 nobody nobody 16384 Oct 28 22:21 NetscapeRoot_uid.db3
-rw------- 1 nobody nobody 16384 Oct 28 22:21 NetscapeRoot_sn.db3
-rw------- 1 nobody nobody 16384 Oct 28 22:21 NetscapeRoot_givenName.db3
-rw------- 1 nobody nobody 16384 Oct 31 09:55 NetscapeRoot_parentid.db3
-rw------- 1 nobody nobody 16384 Oct 31 09:55 NetscapeRoot_objectclass.db3
-rw------- 1 nobody nobody 16384 Oct 31 09:55 NetscapeRoot_numsubordinates.db3
-rw------- 1 nobody nobody 90112 Oct 31 09:55 NetscapeRoot_nsuniqueid.db3
-rw------- 1 nobody nobody 204800 Oct 31 09:55 NetscapeRoot_entrydn.db3
-rw------- 1 nobody nobody 81920 Oct 31 09:55 NetscapeRoot_cn.db3
-rw------- 1 nobody nobody 40960 Oct 31 09:55 NetscapeRoot_ancestorid.db3
-rw------- 1 nobody nobody 16384 Oct 31 09:55 NetscapeRoot_aci.db3
-rw------- 1 nobody nobody 942080 Oct 31 10:14 NetscapeRoot_id2entry.db3

Can´t start up an instance (cluster)

I have the following errors when i tried to start up one of the two instance that i hve in the database:
Could not start the OracleCMService9i service on Local Computer Error 1067 : The Process terminated unexpectedly
Could not start the OracleCMService9i service on Local Computer Error 1068: The dependency service on group failed to start
Both errors occur when i tried to start up the services using Windows 2000 services.

Those services were running before ?
Joel Pérez
http://otn.oracle.com/experts

How can I start a second window of a second profile through the command line?

I have two profiles set up, 'default' and 'second'. If both are already running how can I start a second window of profile 'second'?
firefox -p 'second' : opens a new window of the default and,
firefox -p 'second' -no-remote : tells me that firefox is already running.

I don't think that this is possible.<br />
You need to open this second instance (Firefox profile folder) with the -no-remote command line switch and that makes it impossible to open external links via the command line or via a double-click.<br />
You can only open a link in such an instance by dragging the link on the tab bar of that Firefox window.

Cannot start second instance of collector

Hi everyone
I've got a strange one here. A workstation I noticed that wasn't scanned since 6 months (WinXP SP3, ZCM 10.3.1).
When I check the ZAA windows, it says Last Scanned i.e. today, Last Upload June 2.
I've found several errors 'Cannot start second instance of collector' in the local colw32.log.
However, the workstation gets rebooted daily and I can't find another instance of colw32.exe running in TaskManager.
How can I resolve this? I can't tell how many clients are affected. However, I've got almost 300 clients (15%) that haven't been scanned in the last 180 days...
Thanks
Roland

Originally Posted by rpfenninger
Hi everyone
I've got a strange one here. A workstation I noticed that wasn't scanned since 6 months (WinXP SP3, ZCM 10.3.1).
When I check the ZAA windows, it says Last Scanned i.e. today, Last Upload June 2.
I've found several errors 'Cannot start second instance of collector' in the local colw32.log.
However, the workstation gets rebooted daily and I can't find another instance of colw32.exe running in TaskManager.
How can I resolve this? I can't tell how many clients are affected. However, I've got almost 300 clients (15%) that haven't been scanned in the last 180 days...
Thanks
Roland
We had similar issue, inventory was never uploaded to server. To solve it we had to manually do a "Scan Now" from Zenworks agent -> Show properties -> Inventory -> Scan Now, after we did that once on the workstation then scheduled scans started to upload again.
I guess it would probably also work if you do a Inventory scan from quick tasks in ZCC but I never tried it so I'm not sure.
Thomas

Can`t start oracle instance 11gR2 on Ubuntu 10.4

I noticed something that some diretories are named using my hostname (phoenixbai) while others use localhost.
e.g.
./cdata/localhost
./localhost_ora11g
./localhost_ora11g/sysman/emd/upload/localhost_host_host_configuration_old
./oc4j/j2ee/OC4J_DBConsole_localhost_ora11g
./log/phoenixbai （DIR）
when I rename localhost in ./oc4j/j2ee/OC4J_DBConsole_localhost_ora11g, ./localhost_ora11g with phoenixbai, i can start the oracle instance.
but still, I can`t start lsnrctl & emctl. here is the listener.ora, tnsnames.ora, and /etc/hosts details:
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
      (ADDRESS = (PROTOCOL = TCP)(HOST = phoenixbai)(PORT = 1522))
ADR_BASE_LISTENER = /u01/oracle
ORA11G =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = phoenixbai)(PORT = 1522))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ora11g)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
LISTENER_ORA11G =
(ADDRESS = (PROTOCOL = TCP)(HOST = phoenixbai)(PORT = 1522))
127.0.0.1     phoenixbai     localhost.localdomain     localhost
127.0.1.1     phoenixbai     phoenixbai
127.0.0.1     localhost     localhost
#127.0.0.1       phoenixbai      phoenixbai
#127.0.1.1       localhost       localhost
# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsAnyone any idea?
Please help! if you need any more info, let me know!

Hi;
Duplicate post:
http://forums.oracle.com/forums/thread.jspa?threadID=1111584&tstart=0
If possible please change this thread status to answered(dublicate post), it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Can not start SAP instance after change the profile

Dear all
We use system copy to build SAP system.
Source
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
Target
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
In target system, we want to use the instance profile as source system,
but after copy from source system we find that if parameter em address_space_mb = 512 in the profile,
we can not start SAP instance.
Could anyone explain it?
Best regards
Shirley

Hi Shirley,
I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
Regards,
Paul

CRS Can not start instance PRKP-1001

Hello
I have a 2 node database and on the first node I can not start the instance using srvctl start instance it gives the following error: PRKP-1001 : Error starting instance htdb1 on node telepin1. When I start it using sqlplus it is ok.
Can someone please explain?
Thanks

Do you also see CRS-0215? There's a known problem , when parameter sqlnet.inbound_connect_timeout is set in sqlnet.ora, it should be unset. Unfortunately the error is a little bit generic, if this parameter is currently not set, you have another problem.
Werner

How can I set my database instance to start in OPEN mode after my computer

Hi all,
Sometime, I have to reboot my computer. After it rebooted, my instance is automaticaly executed. But, my database is not set to the OPEN mode (automaticaly). On some development computers, my status is set to OPEN after a reboot. On some computers, the local database is set to the IDLE instance.
How can I set my database instance to start in OPEN mode after my computer has rebooted?
Thank your for any help.

but i could not run command emctl start dbconsolor lsnrctl..
What error you are getting? If you are not able to run both of them then the ORACLE_HOME is not set properly.
i set oracle_home and oracle_sid in thereWhere? Is it set in your user variable part of system variable. It is good to set it in the system variable, so that it will be common for all the users who use the system.
To check whether the variable is set or not go to the command prompt and type
setIf you see your ORACLE_HOME variable then it is set or else not.

Can't start OC4J instance

hi all
i can't start OC4J for forms , this happend after installed jdeveloper 10.1.3
on IDS 10.1.2.0.2
if any advice to help me in this issue
thanks

Don't install JDeveloper on top of any Oracle Home - install it in a separate directory.
The install guide clearly states so - http://www.oracle.com/technology/products/jdev/htdocs/10.1.3.1/install.html#install_start_windows

Can't we start a RAC instance without local pfile ?

DB version : 11.1.0.7.0
OS : Solaris 10 SPARC
--Info about the cluster
2 Node RAC
Both instances using spfile stored in ASM Diskgroup
Passwordless SSH configuration is not working currently (i gather ssh is not mandatory after installation)
We have 7 RAC DBs running in our 11.1 CRS.
After a reboot of our 2 Node RAC servers, in Node2, 4 instances didn't come up.
None of these down instances have a local pfile. The ones that are up in Node2 have it.
So, When i manually tried to bring up the ones that are down
$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.7.0 - Production on Fri Mar 2 21:28:22 2012
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.1/db_1/dbs/initorcl2.ora'
SQL> exit
Disconnected-- Tried directly with spfile (No such option in oracle, but still tried ! )
SQL> startup spfile='+ORCL_DATA01/ORCL/spfileorcl.ora'
SP2-0714: invalid combination of STARTUP options-- Tried from Node1
-- This might have failed because ssh is not working currently. Not sure
$ srvctl start instance -d orcl -i orcl2
PRKP-1001 : Error starting instance orcl2 on node manhclust199
CRS-0215: Could not start resource 'ora.orcl.orcl2.inst'.
$ srvctl start database -d orcl
PRKP-1001 : Error starting instance orcl2 on node manhclust199
CRS-0215: Could not start resource 'ora.orcl.orcl2.inst'.Finally I had to create a local pfile on node2 for each instances in OH/dbs
The content of each local pfile is like
$ cat initorcl2.ora
spfile='+ORCL_DATA01/orcl/spfileorcl.ora'Now the startup worked without any issue for all 4 instances
SQL> startup
ORACLE instance started.
Total System Global Area 2137886720 bytes
Fixed Size                  2155464 bytes
Variable Size            1593838648 bytes
Database Buffers          536870912 bytes
Redo Buffers                5021696 bytes
Database mounted.
Database opened.So, local pfile is mandatory for all RAC instances ?

Hi,
My question is whether this instance specific local pfile must be there in OH/dbs directory ?YES
Didn't get a clear answer yet.
It seems that it is mandatory. And this is most probably the reason these instances didn't come up after the reboot of this node.Startup Sequence:
Startup of Cluster:
Using "srvctl" to start your database/instance:
Srvctl read the OCR and check the parameter SPFILE from your database registration:
If parameter SPFILE in OCR have a value the srvctl will use this value to start your database instance.
If parameter SPFILE in OCR don't have a value (i.e null) Oracle will try find the file SPFILE<ORACLE_SID>.ora on $ORACLE_HOME/dbs
If the file SPFILE<ORACLE_SID>.ora does not exists, Oracle will try use the file init<ORACLE_SID>.ora
If init<ORACLE_SID>.ora does not exist... the startup will fail.
From ORACLE_HOME of your database execute command above to get value of Spfile parameter on OCR:
srvctl config database -d <DB_NAME> |grep SpfileStartup manually from SHELL using SQLPLUS:
Using SQLPLUS to start a database Oracle always first use SPFILE<ORACLE_SID>.ora stored on $ORACLE_HOME/dbs/ if this file does not exist he will try use INIT<ORACLE_SID>.ora to start Database Instance.
If your spfile is stored on ASM you must create a INITFILE pointing to SPFILE stored on ASM.
e.g From instance 1
cat /oracle/oracle/product/11.2.0/db_1/dbs/initorcl1.ora
SPFILE='+DATA/ORCL/spfileorcl.ora'Regards,
Levi Pereira

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

Can't start second VBExample instance

Similar Messages

Maybe you are looking for