Can't start smc ...

# /etc/init.d/init.wbem start
# /etc/init.d/init.wbem status
Solaris Management Console server not running on port 898.
# ps -ef| /usr/xpg4/bin/grep -e smcboot
root 1370 1 0 07:25:01 ? 0:00 /usr/sadm/lib/smc/bin/smcboot
root 1372 1370 0 07:25:01 ? 0:00 /usr/sadm/lib/smc/bin/smcboot
root 1371 1370 0 07:25:01 ? 0:00 /usr/sadm/lib/smc/bin/smcboot
I am new to solaris command, but I try to follow other one by searching on internet
Do you know how to start smc?
:'( help

I found it to be patch 121308-08 (smc patch). I did a patchrm of this patch. Rebooted the server. Checked the status of wbem with /etc/init.d/init.wbem status - usually server is not running - next ran /etc/init.d/init.wbem stop, then /etc/init.d/init.wbem start and status again. When it showed the server running, I ran smc at the prompt and it opened and worked! Good luck.

Similar Messages

  • Can not start up with internal HD after 10.9.4 update

    After installing 10.9.4 update, can no longer startup from internal HD on late 2012 iMac, 2.9 ghz, 8 gb ram, 1 TB internal
    Used Disk Utility to starup from external 10.9.3 drive and that works fine.
    Loaded the manual 10.9.4 update onto external, and tried updating the 10.9.4 internal. No luck.
    Attempting internal startup with 10.9.4 results in black screen, followed by several seconds of lit screen and spinning icon, then back to black screen.
    After starting up on 10.9.3 external, 10.9.4 internal shows mounted, files appear fine, and can copy back and forth. Just can't start with that drive, and can't risk updating external 10.9.3 to 10.9.4 until I find out and fix the problem.
    Thank you

    This was reported by another user:
    I had the same issue with my 2008 iMac and Apple support walked me through the fix yesterday...
    1. Shut the computer down by holding the power button for 10 seconds
    2. Restart the computer and press shift at the same time until you see the progress bar start moving
    3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
    4. After a moment, you should see the spinning beach ball
    5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).
    Apparently it's an issue with an automatic update that never quite got past the login screen.
    If the above doesn't help, then move on to these:
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

  • Can't start up; stuck at gray screen- started w/ Skype

    hi all.  my mom's Macbook Pro can't start up.  it gets stuck at the grey screen w/ the Apple logo and spinning pinwheel every time.  nothing else is plugged into the laptop aside from the power cord.
    here's what i tried already, but to no avail:
      - Reset SMC
      - Reset PRAM
      - Hold shift while starting up... nothing happens.  So can't start in safe mode
      - Used install disk to run Disk Utility diagnostic: Ran into a bunch of Disk Permission errors and fixed those.  Nothing wrong on the Disk itself.
      - Held Command-S while starting up and typed "fsck -fy".  Got "File system was modified" at first.  Ran it again and got clean bill of health there
      - Held "d" while booting, ran the hardware test and it checked out fine.
    after all of the above, tried waiting for it to restart for 15 minutes and still same spinning wheel. 
    this all started when a Skype update couldn't install, so i got rid of the current Skype.  then tried downloading the new Skype. after it supposedly downloaded fully and it was automatically processing in the download pop up window (e.g. something about "writing", "image", etc.), it got stuck and froze the computer for at least 5 minutes.  at that point, i help the power button until it turned out.  then this started...
    please help!  thanks!
    PS: not sure if this has anything to do w/ the problem, but after this happened, i tried to use Disk Utilities to make an image onto an external hard drive and it gave me an "operation timed out" error.
    PPS:  she has the following specs -
    Hitachi Hard drive; partition Map Scheme: GUID Partition Table
    MacBookPro5,1
    Intel Core 2 Duo
    2.40 GHz
    L2 CPU Cache (per processor): 3MB
    I think she has OS X 10.4.5, but not 100% positive
    PPS: by the way, while running on verbose mode, got the following: (just typed some suspicious lines - not all)
    AppleTyMCEDriver::probe(MacBookPro5,1)
    AppleTyMCEDriver::probe fails
    Previous Shutdown Causes: 3
    AGC: 2.8.15, HW version=1.7.3, flags:0, features:1
    IGPU: family specific matching fails
    GFX0: " "
    GFX0: " "
    IGPU: " "
    Matching service count = 0
    disk0s2: I/O error
    localhost fseventsd[28]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (1073 10 1744)
    localhost Symantec Daemon[41]: Validation of a trusted Symantec component failed (-70602)

    MacBook Pro 5,1 came with 10.5 Leopard installed, so it has at least that, if not upgraded to 10.6.
    See this Apple note: http://support.apple.com/kb/TS2570 . You've done some of the steps already.
    It appears your mother is running Norton Antivirus? or other Symantec programs. If the Antivirus, recommend removing it, and if she wants an antivirus, install ClamXav from http://www.clamxav.com.

  • Don't start SMC server & components

    Hi!
    I�m install and setup SMC on Solaris 9/05 (SunBlade 150), but when I�m trying start SMC �
    # ./es-start �Ac , or ./es-guistart - process hang a lot of time without any results:
    SUNMC SERVICE STATUS
    Java Server Running
    Database services Not Running.
    Grouping service Not Running.
    Event-handler service Not Running.
    Topology service Not Running.
    Trap-handler service Not Running.
    Configuration service Not Running.
    CST service Not Running.
    Metadata Services Not Running.
    Hardware service Not Running.
    Web server Not Running.
    Sun Management Center Agent Running.
    Platform Agent Not Running.
    In /var/opt/SUNWsymon/log/server.log i have some errors:
    [00000028 0137 ]error January 16, 2007 4:34:50 PM RMI TCP Connection(3)-10.10.214.31: Error requesting context for agent at 10.10.214.31:165: com.sun.symon.base.server.common.ScRequestDispatchException: Got excep \
    [00000028 0071 ]tion from Agent com.sun.symon.base.server.common.ScResponseException: Finder query error: SNMP request timed out........................................................................................
    [00000029 0057 ]error January 16, 2007 4:34:50 PM RMI TCP Connection(3)-10.10.214.31: dispatch error..................................................................................................................
    [0000002a 00bb ]error January 16, 2007 4:34:50 PM RMI TCP Connection(3)-10.10.214.31: com.sun.symon.base.server.common.ScRequestDispatchException: Error Requesting context of agent at 10.10.214.31:165..............
    [0000002b 009e ]warning January 16, 2007 4:37:41 PM Thread-11: Client ping failed: java.rmi.ConnectException: Connection refused to host: 10.10.214.31; nested exception is: ...........................................
    [0000002c 005e ]warning January 16, 2007 4:37:41 PM Thread-11:      java.net.ConnectException: Connection refused...........................................................................................................
    [0000002d 0052 ]warning January 16, 2007 4:37:41 PM Thread-11: Client ping failed. Attempt 4 of 5.......................................................................................................................
    [0000002e 009e ]warning January 16, 2007 4:49:19 PM Thread-16: Client ping failed: java.rmi.ConnectException: Connection refused to host: 10.10.214.31; nested exception is: ...........................................
    [0000002f 005e ]warning January 16, 2007 4:49:19 PM Thread-16:      java.net.ConnectException: Connection refused...........................................................................................................
    [00000030 0052 ]warning January 16, 2007 4:49:19 PM Thread-16: Client ping failed. Attempt 5 of 5.......................................................................................................................
    [00000031 0097 ]error January 16, 2007 4:49:19 PM Thread-16: Client died: java.rmi.ConnectException: Connection refused to host: 10.10.214.31; nested exception is: ..................................................
    [00000032 005e ]error January 16, 2007 4:49:19 PM Thread-16:      java.net.ConnectException: Connection refused...........................................................................................................
    Any suggestions as to what the problem is and how to fix it?
    Thanks a lot.

    Not sure why you posted that here. SMC and your problem description don't seem to have anything to do with Messaging Server, our topic. Please see if you can locate the correct forum.

  • Help -can't start up after uupgrade and 'internet cleanup' install

    I've got a problem... trying to remember how my installs went, but recently installed 10.5.4 and shortly thereafter a smith micro product called internet cleanup. in addition, during the restart, the air conditioner for our upstairs (computer / exercise room died and at 85F or so, returned to find the fans running full blast and the international "NO" sign in place of the gray apple at startup.
    I am unable to start up at this point and don't know why. I have run disk utility and repaired 1 permission, no joy, and ran disk warrior last night and still can't start up. OS cd and DW see my drive ok and perform tests and repairs ok, but still can't start up.
    if anyone has a recommendation, I'm all ears. I'm ready to start unplugging any peripherals, open the case, and unplug memory, not knowing what else to do.
    thanks in advance,
    macles,
    les owens
    bath, nc

    Get a UPS 1500VA for your Mac Pro.
    I would be surprised Smith is 10.5.x compatible, why not look at Onyx or Leopard Cache Cleaner, or just manually clean out ~/Library/Caches/
    Resetting the SMC (button for pre-2008, leaving unplugged for 2008 model).
    http://www.apple.com/support/macpro/
    Obviously first, if DW repairs your drive and you are running 10.5.4, you have another disk drive and can boot, no?
    Backups and cloned system?
    Else, start installing and setting up a new OS boot drive. Later you can try to merge or migrate and salvage files and applications.
    Note some of the comments on this Internet Cleanup 5.0
    http://www.versiontracker.com/dyn/moreinfo/macosx/19900

  • Istance can't start after a re-boot

    Windows Box with Oracle and NW04s, after a re-boot, istance can't start.
    Have you got any idea ?
    dbs_ora_schema & bdbs_ora_tnsname are seted.
    Regards.
    trc file: "dev_w3", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Sun Apr 05 00:24:18 2009
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\SID\DVEBMGS01\exe\dboraslib.dll' ...
    B  Library 'C:\usr\sap\SID\DVEBMGS01\exe\dboraslib.dll' loaded
    B  Version of 'C:\usr\sap\SID\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.158)
    B  New connection 0 created
    M sysno      01
    M sid        SID
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    159
    M intno      20050900
    M make:      multithreaded, ASCII, optimized
    M pid        3908
    M
    M  kernel runs with dp version 237(ext=110) (@(#) DPLIB-INT-VERSION-237)
    M  length of sys_adm_ext is 364 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 3 3908) [dpxxdisp.c   1316]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
    M  DpShMCreate: sizeof(wp_adm)          30280     (1044)
    M  DpShMCreate: sizeof(tm_adm)          3772368     (18768)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/53288/85512/138848
    M  DpShMCreate: sizeof(slock_adm)          138848     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=5400/8/432040/432048
    M  DpShMCreate: sizeof(file_adm)          432048     (72)
    M  DpShMCreate: sizeof(vmc_adm)          34992     (1296)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 05A80040, size: 5024496)
    M  DpShMCreate: allocated sys_adm at 05A80040
    M  DpShMCreate: allocated wp_adm at 05A81B38
    M  DpShMCreate: allocated tm_adm_list at 05A89180
    M  DpShMCreate: allocated tm_adm at 05A891B0
    M  DpShMCreate: allocated wp_ca_adm at 05E22180
    M  DpShMCreate: allocated appc_ca_adm at 05E267D0
    M  DpShMCreate: allocated comm_adm at 05E27F40
    M  DpShMCreate: allocated slock_adm at 05EA8DF0
    M  DpShMCreate: allocated file_adm at 05ECAC50
    M  DpShMCreate: allocated vmc_adm_list at 05F34400
    M  DpShMCreate: allocated gw_adm at 05F34440
    M  DpShMCreate: allocated vmc_adm at 05F34470
    M 
    M Sun Apr 05 00:24:19 2009
    M  DpShMCreate: allocated ca_info at 05F3CD20
    M  DpShMCreate: allocated wall_adm at 05F3CD28
    M  DpSesCreateTable: attached session table at 06010040 (len=95192)
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 3 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  DpVmcInit2: o.k.
    M 
    M Sun Apr 05 00:24:21 2009
    M  ThInit: running on host server033
    M 
    M Sun Apr 05 00:24:22 2009
    M  calling db_connect ...
    C  Prepending C:\usr\sap\SID\DVEBMGS01\exe to Path.
    C  Oracle Client Version: '10.2.0.1.0'
    C  Client NLS settings: AMERICAN_AMERICA.WE8DEC
    C  Logon as OPS$-user to get SAPSID's password
    C  Connecting as /@SID on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 WE8DEC                                                    1   04848B58   0484E0D4   0484D95C
    C  Attaching to DB Server SID (con_hdl=0,svchp=0484D8A8,srvhp=0A394A74)
    C  Starting user session (con_hdl=0,svchp=0484D8A8,srvhp=0A394A74,usrhp=0A3A95D8)
    C  Now '/@SID' is connected: con_hdl=0, nls_hdl=0, session_id=153.
    C 
    C Sun Apr 05 00:24:23 2009
    C  Got SAPSID's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=0484D8A8,usrhp=0A3A95D8)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPSID/<pwd>@SID on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 WE8DEC                                                    1   04848B58   0484E0D4   0484D95C
    C  Starting user session (con_hdl=0,svchp=0484D8A8,srvhp=0A394A74,usrhp=0A3A95D8)
    C  Now 'SAPSID/<pwd>@SID' is connected: con_hdl=0, nls_hdl=0, session_id=150.
    C  Database NLS settings: AMERICAN_AMERICA.WE8DEC
    C  DB instance SID is running on server033 with ORACLE version 10.2.0.2.0 since APR 05, 2009, 00:23:08
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20090405 002422 server033       
    C  build_stmt: reallocating stmt buffer: 256 -> 2000 characters
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    M  vmcj/sgc_options: switch off delayed session cleanup during shared gc
    M  vmcj/sgc_options: switch off template cleanup before cloning
    J 
    J Sun Apr 05 00:24:25 2009
    J  extMemCheck is set to disp+work.ThVmcMemCheck(thxxvmemu.c:3324)
    J  extGcMemReserve is set to disp+work.ThVmcGcMemReserve(thxxvmemu.c:3155)
    J  extGcMemCommit is set to disp+work.ThVmcGcMemCommit(thxxvmemu.c:3192)
    J  extGcMemFree is set to disp+work.ThVmcGcMemFree(thxxvmemu.c:3211)
    J  extCreateSharedCodeCache is set to disp+work.ThVmcSharedCodeCacheCreate(thxxvmemu.c:2509)
    J  extSetSharedCodeCachePerm is set to disp+work.ThVmcSharedCodeCacheSetPerm(thxxvmemu.c:2587)
    J  extMalloc is set to disp+work.ThVmcMallocDispatcher(thxxvmemu.c:2638)
    J  extCalloc is set to disp+work.ThVmcCallocDispatcher(thxxvmemu.c:2665)
    J  extRealloc is set to disp+work.ThVmcReallocDispatcher(thxxvmemu.c:2692)
    J  extFree is set to disp+work.ThVmcFreeDispatcher(thxxvmemu.c:2717)
    J  extAddResourceToHeap is set to disp+work.ThVmcAddResourceToHeap(thxxvmemu.c:3230)
    J  extRemoveResourceFromHeap is set to disp+work.ThVmcRemoveResourceFromHeap(thxxvmemu.c:3256)
    J  extGetLocalMemory is set to disp+work.ThJGetLocalMemory(thxxvmemu.c:3401)
    J  extGetLocalMemoryPeak is set to disp+work.ThJGetLocalMemoryPeak(thxxvmemu.c:3413)
    J  extGetLocalAllocatedMemory is set to disp+work.ThJGetLocalAllocatedMemory(thxxvmemu.c:3425)
    J  extGetGlobalMemory is set to disp+work.ThJGetGlobalMemory(thxxvmemu.c:3470)
    J  extGetGlobalMemoryPeak is set to disp+work.ThJGetGlobalMemoryPeak(thxxvmemu.c:3482)
    J  extGetGlobalAllocatedMemory is set to disp+work.ThJGetGlobalAllocatedMemory(thxxvmemu.c:3494)
    J  extGetUsedBytes is set to disp+work.ThVmcGetUsedBytes(thxxvmemu.c:3278)
    J  extGetGuardInfo is set to disp+work.ThVmcGetGuardInfo(thxxvmemu.c:1968)
    J  extWriteMemoryDump is set to disp+work.ThJWriteMemoryDump(thxxvmemu.c:1995)
    J  extGetPid is set to disp+work.ThJGetPid(thxxjava.c:8916)
    J  extRegPtr is set to disp+work.ThJRegPtr(thxxvmemu.c:1736)
    J  extGetPtr is set to disp+work.ThJGetPtr(thxxvmemu.c:1748)
    J  extDeregPtr is set to disp+work.ThJDeregPtr(thxxvmemu.c:1760)
    J  extAbort is set to disp+work.ThVmcJAbortHandler(thxxjava.c:6889)
    J  extExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:6777)
    J  extSaveExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:6777)
    J  extSaveErrTxt is set to disp+work.ThVmcJSetVmErrTxt(thxxjava.c:6859)
    J  extSemLock is set to disp+work.ThJSemLock(thxxvmemu.c:568)
    J  extSemUnlock is set to disp+work.ThJSemUnlock(thxxvmemu.c:574)
    J  extMtxOpen is set to disp+work.ThJMtxOpen(thxxvmemu.c:680)
    J  extMtxClose is set to disp+work.ThJMtxClose(thxxvmemu.c:733)
    J  extMtxLock is set to disp+work.ThJMtxLock(thxxvmemu.c:771)
    J  extMtxTrylock is set to disp+work.ThJMtxTrylock(thxxvmemu.c:931)
    J  extMtxUnlock is set to disp+work.ThJMtxUnlock(thxxvmemu.c:1027)
    J  extMtxRwLock is set to disp+work.ThJMtxRwLock(thxxvmemu.c:1101)
    J  extMtxRwUnlock is set to disp+work.ThJMtxRwUnlock(thxxvmemu.c:1261)
    J  extMtxLockCount is set to disp+work.ThJMtxLockCount(thxxvmemu.c:1433)
    J  extMtxLocked is set to disp+work.ThJMtxLocked(thxxvmemu.c:1439)
    J  extMtxLocking is set to disp+work.ThJMtxLocking(thxxvmemu.c:1482)
    J  extMtxWaitingVms is set to disp+work.ThJMtxWaitingVms(thxxvmemu.c:1552)
    J  extMtxIAmOwner is set to disp+work.ThJMtxIAmOwner(thxxvmemu.c:1618)
    J  extMtxGetInlineLockLoops is set to disp+work.ThVmcMtxGetInlineLockLoops(thxxvmc.c:7516)
    J  extMtxGetRollOutLockLoops is set to disp+work.ThVmcMtxGetRollOutLockLoops(thxxvmc.c:7522)
    J  extOpen is set to disp+work.ThIoJavaOpen(thxxfile.c:381)
    J  extReopen is set to disp+work.ThIoJavaReopen(thxxfile.c:535)
    J  extClose is set to disp+work.ThIoJavaClose(thxxfile.c:665)
    J  extSeek is set to disp+work.ThIoJavaSeek(thxxfile.c:750)
    J  extSetLength is set to disp+work.ThIoJavaSetLength(thxxfile.c:882)
    J  extSync is set to disp+work.ThIoJavaSync(thxxfile.c:910)
    J  extIoAvailable is set to disp+work.ThIoJavaAvailable(thxxfile.c:937)
    J  extFileSizeFd is set to disp+work.ThIoJavaFileSizeFD(thxxfile.c:965)
    J  extPread is set to disp+work.ThIoJavaPRead(thxxfile.c:1074)
    J  extPwrite is set to disp+work.ThIoJavaPWrite(thxxfile.c:1111)
    J  extReadv is set to disp+work.ThIoJavaReadV(thxxfile.c:994)
    J  extWritev is set to disp+work.ThIoJavaWriteV(thxxfile.c:1038)
    J  extFDataSync is set to disp+work.ThIoJavaDataSync(thxxfile.c:1145)
    J  extFixVmToProcess is set to disp+work.ThIoFixVmToWp(thxxfile.c:1230)
    J  extReleaseVmFromProcess is set to disp+work.ThIoRelVmFromWp(thxxfile.c:1239)
    J  extGetOSDescriptor is set to disp+work.ThIoJavaGetOsFd(thxxfile.c:1249)
    J  extDetachIo is set to disp+work.ThIoJavaDetach(thxxfile.c:1273)
    J  extSocket is set to disp+work.ThSoSocketVmc(thxxsock.c:806)
    J  extRecvMsg is set to disp+work.ThSoRecvmsg(thxxsock.c:1172)
    J  extSendMsg is set to disp+work.ThSoSendmsg(thxxsock.c:1600)
    J  extCloseSocket is set to disp+work.ThSoCloseSocket(thxxsock.c:999)
    J  extConnect is set to disp+work.ThSoConnect(thxxsock.c:817)
    J  extBind is set to disp+work.ThSoBind(thxxsock.c:1841)
    J  extAccept is set to disp+work.ThSoAccept(thxxsock.c:2028)
    J  extListen is set to disp+work.ThSoListen(thxxsock.c:2282)
    J  extPoll is set to disp+work.ThSoPoll(thxxsock.c:2439)
    J  extShutdown is set to disp+work.ThSoShutdown(thxxsock.c:2700)
    J  extGetSockOpt is set to disp+work.ThSoGetsockopt(thxxsock.c:2860)
    J  extSetSockOpt is set to disp+work.ThSoSetsockopt(thxxsock.c:3042)
    J  extGetSockName is set to disp+work.ThSoGetsockname(thxxsock.c:3207)
    J  extGetRecvLength is set to disp+work.ThSoGetrecvlength(thxxsock.c:3396)
    J  extSetNonBlocking is set to disp+work.ThSoSetnonblocking(thxxsock.c:3561)
    J  extCreateControlArea is set to disp+work.ThJCreateControlArea(thxxvmemu.c:3658)
    J  extGetControlArea is set to disp+work.ThJGetControlArea(thxxvmemu.c:3672)
    J  extNotifyAboutControlFlagChange is set to disp+work.ThJControlFlagChange(thxxjava.c:6952)
    J  extVmRunningInWp is set to disp+work.ThJVmRunningInWp(thxxjava.c:8745)
    J  extVmRunningOnJavaStack is set to disp+work.ThJVmRunningOnJavaStack(thxxjava.c:8753)
    J  extGetJavaMainStack is set to disp+work.ThJGetJavaMainStack(thxxjava.c:8758)
    J  extAlarm is set to disp+work.ThJAlarm(thxxjava.c:7033)
    J  setGlobalsHook is set to disp+work.ThJSetGlobals(thxxjava.c:7268)
    J  getGlobalsHook is set to disp+work.ThJGetGlobals(thxxjava.c:7250)
    J  getWpIdHook is set to disp+work.ThGetWpId(thxxtool.c:2007)
    J  getWpNoHook is set to disp+work.ThGetWpNo(thxxtool.c:2033)
    J  getVmCount is set to disp+work.rcui::AgiContLoop::GetType(agiarea.h:266)
    J  getEvtConnHdl is set to disp+work.ThJGetEvtConnHdl(thxxjava.c:1166)
    J  selNextHdl is set to disp+work.ThVmcSelNextHdl(thxxvmio.c:337)

    J  rollOut is set to disp+work.ThJRollOut(thxxjava.c:6498)
    J  sleepFunc is set to disp+work.ThJSleep(thxxjava.c:8006)
    J  selTimeout is set to disp+work.ThJSelTimeout(thxxjava.c:8535)
    J  proxyWakeup is set to disp+work.ThJHandleProxyWakeup(thxxjava.c:8863)
    J  extGetProxyActivatedHook is set to disp+work.ThJGetSapProxyActivated(thxxjava.c:8666)
    J  getVmcFlavour is set to disp+work.ThJGetVmcFlavour(thxxjava.c:8928)
    J  getVmType is set to disp+work.ThJGetVmType(thxxjava.c:8940)
    J  getVmMaxNo is set to disp+work.ThJGetVmMaxNo(thxxvmemu.c:3596)
    J  getVmId is set to disp+work.ThJGetActVmc(thxxjava.c:11700)
    J  isValidVmId is set to disp+work.ThJisValidVmId(thxxvmemu.c:3631)
    J  getVmUuid is set to disp+work.ThJGetVmUuid(thxxvmemu.c:3606)
    J  createUniqueId is set to disp+work.ThJCreateUniqueId(thxxvmemu.c:3643)
    J  statClock is set to disp+work.ThJClock(thxxjava.c:12991)
    J  statClockDiff is set to disp+work.ThJClockDiff(thxxjava.c:12996)
    J  statisticActive is set to disp+work.ThJStatisticsActive(thxxjava.c:9083)
    J  openStatInterval is set to disp+work.ThJOpenStatInterval(thxxjava.c:9105)
    J  closeStatInterval is set to disp+work.ThJCloseStatInterval(thxxjava.c:9121)
    J  intervalStatActive is set to disp+work.ThJIntervalStatActive(thxxjava.c:9138)
    J  extTrace is set to disp+work.ThJTrace(thxxvmemu.c:3688)
    J  extGetBuiltinLibs is set to disp+work.ThJGetBuiltinLibs(thxxjava.c:7102)
    J  extFindNative is set to disp+work.ThJFindNative(thxxvmemu.c:3709)
    J  extPreloadNativeOpen is set to disp+work.ThJPreloadNativeOpen(thxxjava.c:7116)
    J  extPreloadNativeSym is set to disp+work.ThJPreloadNativeSym(thxxjava.c:7128)
    J  extGetDebugFlags is set to disp+work.ThVmcGetBitmasks(thxxvmc.c:3661)
    J  extStartExternalTimer is set to disp+work.ThJStartExternalTimer(thxxjava.c:7140)
    J  extStopExternalTimer is set to disp+work.ThJStopExternalTimer(thxxjava.c:7161)
    J  extAsyncCompilerActive is set to disp+work.ThJAsyncCompilerActive(thxxjava.c:12817)
    J  extCallAsyncCompiler is set to disp+work.ThJCallAsyncCompiler(thxxjava.c:12851)
    J  extCheckSgc is set to disp+work.ThVmcCheckSGC(thxxvmc.c:7069)
    J  extSharedWaterMark is set to disp+work.ThVmcSgcWaterMark(thxxvmc.c:7511)
    J  extCheckForCleanup is set to <null>
    J  extJvmxInit2 is set to <null>
    J  extJvmxCleanup is set to <null>
    J  extWriteSyslog is set to disp+work.ThJWriteSyslog(thxxjava.c:14006)
    J  extRegisterSignal is set to disp+work.ThJRegisterSignalHandler(thxxjava.c:14054)
    M  ThVmcInitWaitForVm: th_maxWaitForVmTime=30
    I 
    I Sun Apr 05 00:24:35 2009
    I  MtxInit: 3 0 0
    M  SHM_PRES_BUF               (addr: 0A880040, size: 4400128)
    M  SHM_ROLL_AREA          (addr: 152F0040, size: 268435456)
    I  *** ERROR => [MapOsShm] Can't find free space for Shared Memory (Size=131072 KB)
                   [shmnt.c      2174]
    I  *** ERROR => [CreateOsShm] MapViewOfFile(Key=8,Handle=0x000004AC) failed with Err=0
                   [shmnt.c      2174]
    I  *** ERROR => ShmCreate: Create (8,134217728,3) failed [shmnt.c      506]
    Memory diagnostic                                 *
    Systeminformation
    Processor-Typ             : Intel unknown
    Processor-Count           : 4
    Operating System          : NT 5.2, Build 3790
    Service Pack              : Service Pack 2
    NT Pagefile Informations
    Config. minimum size      : 20971520 K
    Config. maximum size      : 20971520 K
    Avail.  maximum size      : 20971520 K
    Num
    Pagefile
    Min.Size
    Max.Size
    Avail.Max
    Curr.Size
    1
    c:\pagefile.sys
    20971520 K
    20971520 K
    20971520 K
    20955136 K
    NT Task Manager Informations
    Total Handles             :    18579
    Total Threads             :      863
    Total Processes           :       63
    Commit Charge Total       :  9954748 K
    Commit Charge Limit       : 37478672 K
    Commit Charge Peak        : 12058968 K
    Phys.Memory Total         : 16776440 K
    Phys.Memory Available     : 14227796 K
    File Cache                :   159128 K
    Kernel Memory Total       :   144908 K
    Kernel Memory Paged       :   109732 K
    Kernel Memory Nonpaged    :    35176 K
    Memory usage of current process
    Total virt.address space  :  2097024 K
    Avail.virt.address space  :   297360 K
    Private Pages             :        0 K
    Total heap size           :    23722 K
    Virtual memory regions    :        0 K
    Uncommitted heap memory   :    16124 K
    Allocated heap memory     :     6093 K
    Moveable heap memory      :        0 K
    DDE shared heap memory    :        0 K
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    4
    256 K
    2116 K
    0 K
    0 K
    6
    328
    smss.exe
    472 K
    476 K
    168 K
    168 K
    0
    400
    winlogon.exe
    10024 K
    10232 K
    6644 K
    6756 K
    2
    448
    services.exe
    3736 K
    3860 K
    1744 K
    2068 K
    1
    460
    lsass.exe
    9292 K
    9312 K
    8488 K
    8520 K
    3
    652
    svchost.exe
    3016 K
    3016 K
    996 K
    1008 K
    0
    772
    Smc.exe
    6960 K
    19332 K
    8308 K
    8632 K
    12
    856
    svchost.exe
    19976 K
    21420 K
    14388 K
    18716 K
    14
    960
    ccSvcHst.exe
    2264 K
    10464 K
    6088 K
    7344 K
    12
    1320
    spoolsv.exe
    4932 K
    5028 K
    3680 K
    3696 K
    1
    1400
    VivaldiFramework.exe
    1756 K
    1768 K
    540 K
    556 K
    0
    1436
    nvpmgr.exe
    4896 K
    4948 K
    2536 K
    2612 K
    1
    1492
    cmd.exe
    1564 K
    1564 K
    1488 K
    1528 K
    0
    1504
    javaw.exe
    13852 K
    14456 K
    12964 K
    13580 K
    4
    1628
    nvstatsmngr.exe
    4288 K
    4288 K
    2276 K
    2276 K
    1
    2028
    Rtvscan.exe
    2620 K
    14124 K
    6100 K
    504024 K
    19
    140
    mrmonitor.exe
    6348 K
    6388 K
    3368 K
    3556 K
    1
    2072
    resrcmon.exe
    16196 K
    16248 K
    11856 K
    12184 K
    14
    2204
    enrepserver.exe
    [**] SID_00
    8996 K
    8996 K
    38340 K
    38340 K
    2
    2336
    svchost.exe
    4868 K
    4932 K
    2804 K
    23000 K
    3
    3024
    winlogon.exe
    2916 K
    9048 K
    4152 K
    4152 K
    3
    3160
    svchost.exe
    4056 K
    4056 K
    3032 K
    3032 K
    1
    3432
    rdpclip.exe
    3472 K
    3472 K
    1036 K
    1036 K
    0
    3504
    ctfmon.exe
    3036 K
    3036 K
    580 K
    880 K
    1
    3516
    Explorer.EXE
    18816 K
    18988 K
    12244 K
    12472 K
    6
    3580
    SmcGui.exe
    4464 K
    14476 K
    4748 K
    4756 K
    6
    3588
    Popup.exe
    4728 K
    4792 K
    1492 K
    1620 K
    12
    3608
    jusched.exe
    2284 K
    2284 K
    544 K
    544 K
    0
    3620
    ccApp.exe
    684 K
    6184 K
    3896 K
    3916 K
    2
    3856
    CluAdmin.exe
    1248 K
    6612 K
    2036 K
    2104 K
    2
    4004
    msg_server.EXE
    [MS] SID_00
    7240 K
    7240 K
    8556 K
    8556 K
    1
    4012
    enserver.EXE
    [**] SID_00
    19624 K
    19624 K
    59424 K
    59424 K
    4
    2104
    ORACLE.EXE
    1586968 K
    1610220 K
    1586864 K
    1632800 K
    404
    1172
    TNSLSNR.exe
    7208 K
    7480 K
    5236 K
    7100 K
    4
    2572
    gwrd.exe
    [GW] CMG_71
    5968 K
    5968 K
    7132 K
    14924 K
    1
    2308
    mmc.exe
    1264 K
    14072 K
    11676 K
    12404 K
    4
    2848
    sapstartsrv.exe
    21756 K
    21756 K
    21924 K
    21924 K
    5
    3124
    disp+work.EXE
    [DP] SID_01
    78152 K
    78152 K
    56632 K
    56632 K
    19
    3312
    igswd.EXE
    [**] SID_01
    3112 K
    3340 K
    1616 K
    1884 K
    0
    3336
    igsmux.exe
    12348 K
    12348 K
    13476 K
    13476 K
    3
    3360
    igspw.exe
    2952 K
    2952 K
    2548 K
    2548 K
    0
    3380
    igspw.exe
    2952 K
    2952 K
    2548 K
    2548 K
    0
    3812
    gwrd.EXE
    [GW] SID_01
    9188 K
    9188 K
    7564 K
    15552 K
    2
    3792
    icman.EXE
    [**] SID_01
    78064 K
    78068 K
    78144 K
    78204 K
    19
    3908
    disp+work.EXE
    37752 K
    46720 K
    69524 K
    79044 K
    13
    4000
    disp+work.EXE
    [WP] SID_01
    36132 K
    46712 K
    68304 K
    79044 K
    12
    4032
    disp+work.EXE
    [WP] SID_01
    36164 K
    46744 K
    68304 K
    79044 K
    12
    4064
    disp+work.EXE
    [WP] SID_01
    36200 K
    46780 K
    68304 K
    79044 K
    12
    Sum
    2155060 K
    2304312 K
    M  *** ERROR => ThShMCreate: ShmCreate SHM_PAGING_AREA failed [thxxhead.c   2599]
    M  *** ERROR => ThIPCInit: ThShMCreate [thxxhead.c   2074]
    M  ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c   1523]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c   10504]
    M 
    M  Info for wp 3
    M 
    M    pid = 3908
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    req.vm = no VM
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server server033_SID_01 on host server033 (wp 3)
    M  *  ERROR       ThInit: ThIPCInit
    M  *
    M  *  TIME        Sun Apr 05 00:24:35 2009
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          17
    M  *  MODULE      thxxhead.c
    M  *  LINE        10724
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 3 3908) [dpnttool.c   333]

  • My MacBook Pro can not start completely it stays on a blue scre

    I restarted my MacBook Pro but left a USB plugged now it can not start completely it stays on a blue screen where I can see the pointer and sometimes a small icon which indicates its processing something. It has being like that for two days. I can not even turn it off I have to hold the bottom to force it to shut off.

    i know this may be silly but i hope you removed the usb device while restarting.
    If you did then hold up the option key as soon as you press the power button. It will bring you to a bootfolder selection choose your main partition and boot up. Alternatively if this does not help then do a PRAM and SMC reset. If these things fail then select recovery partition and go to disk utility and repair permisions for the main partition within the first aid section. If all else fails you would need to re install the osx, hope you have a back up.
    Since you have not told us what model and year the mbp is if you have the recovery discs with you use disc 2 and read the insturctions on the disc as to what key you should hold.

  • I cant start smc,help,thanks

    1.method 1:open solaris (express 6/06,newest version),only one nootbook.
    when i excute:
    /etc/init.d/init.wbem start
    after a while:
    /etc/init.d/init.wbem status
    result:Solaris Management Console server not running on port 898.
    i have excute:JAVA_HOME=/usr/java
    export JAVA_HOME
    or edit /.profile
    add tow line:
    JAVA_HOME=/usr/java
    export JAVA_HOME
    2.method 2:start smc:
    /usr/sadm/bin/smc &
    load /usr/sadm/lib/smc/prereg/SUNWmc/smc/smc.tbx or this_computer.tbx,
    can't get the default tool:
    how can i do?Can everybody give me a detail method to sovle
    this question?
    thanks very much!!!
    Message was edited by:
    pengchenghu

    hello:
    Thank you very much!
    i have tried you method,but can't start wbem.
    Actually,in /var/sadm hase no folder "smc",only "wbem".
    in /var/adm/messages,only one software error as bellow:
    Aug 16 22:56:49 plhpc cacao[722]: [ID 702911 daemon.warning] com.sun.scn.jmx.impl.AbstractComponent.log : SCNClientConfigImpl.deactivate("Register the Solaris software without choosing an update option") -- module locked
    Aug 16 22:57:49 plhpc sendmail[492]: [ID 702911 mail.crit] My unqualified host name (plhpc) unknown; sleeping for retry
    Aug 16 22:57:49 plhpc sendmail[491]: [ID 702911 mail.crit] My unqualified host name (plhpc) unknown; sleeping for retry
    Aug 16 23:01:38 plhpc sendmail[491]: [ID 702911 mail.alert] unable to qualify my own domain name (plhpc) -- using short name
    Aug 16 23:01:38 plhpc sendmail[492]: [ID 702911 mail.alert] unable to qualify my own domain name (plhpc) -- using short name
    I install os(express) only by using the first five disk(cd format,not dvd),Is it related smc?
    thans.

  • My early 2011 macbook pro 15" ... can't start up, boot, ...

    About 1 month before, this situation happened, but it went normal in 1 hour.
    This time.. situation hangs there.
    I can't start up no screen, I've tried SMC, NVRAM, safe mode, no use, coz it shuts down before those solutions.
    And the weird things is that MBP keeps turn on and shut down.... oh my GOD
    This is the most werid thing I ever see in my laptop.
    Here is the video
    2011 Macbook pro 15" - Can't start up - No Screen - Won't wake up ?HELP? - YouTube
    Please help.. indeed..

    No can help, you need to take that one in for service, sorry and good luck.

  • Error "can not start the configuration in parallel does not correct"

    Hello everybody,
    I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
    Thanks in advance!

    Check this KB
                  1678498  - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

  • Can not start data Collection service

    I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
    I also could not stop it. I rebooted the server and the status for this service is in starting.
    Thanks,

    Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server.  Have you considered using a newer version of FM Server?

  • I can not start secion in creative cloud from a macbook

    I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
    En español.
    No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
    we want a valid and positive response

    Hello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    Please let me know if you are successful or not.

  • Can not start Enterprise Manager web page

    I can not start Enterprise Manager web page.
    Here is my steps:
    1. Start enterprise manager
    emctl start
    Waiting for EM to initialize ...Started
    2. Check status:
    emctl status
    EMD is up and running : 200 OK
    3. Start the web page
    http://myhost:1810/
    4. get following error
    "There was no response. The server could be down or is not responding"
    System info:
    Database: 8.1.7.2
    OAS: 9.2.0.2
    JDK: 1.3.0_02
    Server OS: SunOS 5.8
    My question is where is the log file of enterprise manager and what the problem is.
    Thanks in advance
    Don

    diego,
    Thank you for your help. when I try your command I get following error:
    emctl start iasconsole
    Unknown command option
    Usage::
    emctl start|stop|status
    emctl reload | upload
    emctl set credentials [<Target_name>[:<Target_Type>]]
    emctl gencertrequest
    emctl installcert [-ca|-cert] <certificate base64 text file>
    emctl set ssl test|on|off|password [<old password> <new password>]
    emctl set password <new pwd>
    emctl authenticate <pwd>
    emctl switch home [-silent <new_home>]
    emctl config <options>
    emctl config options can be listed by typing "emctl config"

  • "can not start a job" issue in AWM

    Hi ALL,
    I am maintaining my cube from PLSQL with following options
    1. buildtype = "BACKGROUND"
    2. trackstatus = "true"
    3. maxjobqueues = 3
    i get following error when i see the "olapsys.xml_load_log" table
    ***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
    Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
    Hi Keith, it will be great if you can answer this one.
    My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
    Kind Regards,
    QQ
    Message was edited by:
    dwh_10g

    Applies to:
    Oracle OLAP - Version: 10.1 to 11.1
    This problem can occur on any platform.
    Symptoms
    - We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
    - When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
    - However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
    13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
    13:29:39 ***Error Occured in BUILD_DRIVER
    - In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
    We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
    PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
    hv=1976722458 ad='76dd8bcc'
    begin
    DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
    'DEFAULT_JOB_CLASS', true, true, :3); end;
    END OF STMT
    PARSE
    #20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
    EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
    1176987702325167
    ERROR #20:err=27486 tim=465202984
    Cause
    User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
    Solution
    1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
    e.g.
    SELECT user_id,username FROM all_users WHERE user_id=91;
    2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
    SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
    3. Ensure that the CREATE JOB privilege is listed.
    The CREATE JOB privilege can be granted in various ways to a user:
    - via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
    GRANT OLAP_USER TO <username>;
    - explicitly
    GRANT CREATE JOB TO <username>;

  • I was told to update iTunes. The update failed. Now I can't open iTunes but get the following messages: The program can't start because MSVCR80.dll is missing from your computer. Try reinstating the program to fix this problem.  Then I get iTunes was not

    I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly.  Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

Maybe you are looking for

  • How SAP standard run the interest calculation in AR module

    Dear expert, would like to seek for your advise, how SAP standard run the interest calculation in AR module ? Also advise,does the interest calculation generate the interest base on the dunning run?What are relationship between interest calculation g

  • Why these EJB's are not worked.........................

    Hi all, Im using EJB 3.0 with Jboss 4.2. I deployed my ejb jar file and its client application (a war file) with EAR file. In my war I have servlet and Im trying to access my session bean through its local interface. Im following a example from 'O Ri

  • Is it possible to have email validation?

    Is it possible to have two email fields so that a user must enter their email twice in order to validate that they typed their email correctly? Or any other method for validating emails are correct? Thanks.

  • Why can't i text androids with my iphone5?

    why cant i text androids while using my iphone 5

  • I can't finish the iTunes 10.5.3 update' phase.

    I have tried to update my current version of iTunes to the 10.5.3 update. And the update begins, but never finishes. It gets stuck in the 'installing' phase. If this has happened to you, and you know how to fix it, please let me know. I can't downloa