Can´t start up an instance (cluster)

I have the following errors when i tried to start up one of the two instance that i hve in the database:
Could not start the OracleCMService9i service on Local Computer Error 1067 : The Process terminated unexpectedly
Could not start the OracleCMService9i service on Local Computer Error 1068: The dependency service on group failed to start
Both errors occur when i tried to start up the services using Windows 2000 services.

Those services were running before ?
Joel Pérez
http://otn.oracle.com/experts

Similar Messages

  • Can i start only Java Instance

    HI,
    I installed both JAVA+ABAP stack in Nw2004s.can i start only Java STACK(java instance) with out starting the ABAP instance from SAP MMC

    Hi Surya,
                Under normal circumstances the persistence store for an ABAP+JAVA stack is the ABAP system, therefore, your system may not work without the ABAP stack. If you need just the java stack, I would recommend that you install a JAVA only system.
    Sajit

  • Can't start second VBExample instance

    when start second VBExample instance throw error initializeation failed. Unable to create registry on port 2199, I guessed Unable to start a service on the same port

    Those services were running before ?
    Joel Pérez
    http://otn.oracle.com/experts

  • EhP5 Install Failed in START_SHDI_FIRST - can't start the shadow instance

    We are in the process of upgrading our ERP system from EhP4/NW701 to EhP5/702. The current phase is MAIN_SHADOW/START_SHDI_FIRST.  SAPehpi is having problem starting the shadow instance.  We tried to manually stop and start it as well, but of no help.  The log files 'STARTSFI.LOG' and 'DEVTRACE.LOG' don't seem to provide any useful information.  I looked through the files under the work directory for the shadow instance and still couldn't find any helpful information.  Where else should I look?  Please help!
    Thanks,
    Jonathan Yun

    Hi Srikishan,
    Thanks for your reply.  dev_disp didn't show much helpful information. However, dev_w0 did show error that I didn't except to see.
    Do you know if EhP5 installation require oracle 11g client to be installed? 
    We ran into a problem at the beginning of the installation where /usr/sap/put/EHPI/abap/exe/dboraslib.o couldn't be loaded because it was looking for symbol strcat.  We did a dump of the header for it (dboraslib.o) and saw it reference oracle 11g client so we put the 11g client libraries out there for it to reference but didn't officially install it and change the libpath for the original system.  And now, dev_wo is complaining about not able to load /usr/sap/put/EHPI/abap/exe/dboraslib.o because it couldn't find strcat from the 10g client.  I tried manually changing the libpath so the 11g client path appears before the 10g client path and stop and start the shadow instance manually.  However, no matter what I set the libpath to, the error is the same.
    M  *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/put/EHPI/abap/exe/db
    oraslib.o") FAILED
      "     0509-130 Symbol resolution failed for /usr/sap/put/EHPI/abap/exe/dborasl
    ib.o because:
            0509-136   Symbol strcat (number 149) is not exported from
                       dependent module /oracle/client/10x_64/instantcl"  (errno=8,E
    xec format error) [dlux.c       445]
    B  *** ERROR => Couldn't load library '/usr/sap/put/EHPI/abap/exe/dboraslib.o'
    [dbcon.c      5632]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1487]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thx
    xhead.c   11295]
    Thanks,
    Jonathan Yun

  • How can I start two FF instances under two Windows accounts at once w/o -no-remote? I need to be able to send URLs to them.

    I have one FF (36.0) installation and two Windows user accounts: one for work (w/o internet access but with access to domain resources like JIRA) and one for internet access (w/o access to local resources). I need two instances of FF running at the same time with different resources.
    I've created profiles with different names under both accounts and specify profile names using -p parameter. However when I try to start both instances of FF (second one is started via RUNAS), second instance can't be started, new tab in already running instance is opened instead:
    firefox.exe -p profile
    runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i"
    When I start one of them with -no-profile, I can start both at once... but when I try to execute firefox.exe with an URL in order to open a tab with this URL in one of running instances (local URLs I open by starting firefox.exe under work account and remote URLs I open by starting FF via RUNAS), it can't sent URL to already running instance of same user, it always sends URLs to an instance that is runnung w/o -no-remote.
    firefox.exe -p profile -url "url"
    runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i -url \"url\""
    So, I need to have two instances under two different Windows user accounts, and when firefox.exe is started again, it should only communicate with instance that is running under same user account, it must not communicate with instance that is running under different Windows account.

    ''guigs2 [[#answer-699118|said]]''
    <blockquote>
    https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options#-no-remote
    This feature was removed and unfortunately I do not have any ETA or work around for this.
    </blockquote>
    It was the different '''-remote''' switch that was removed and not the '''-no-remote'''
    https://www.mozilla.org/en-US/firefox/36.0/releasenotes/

  • Can't start Directory Server instance

    I just installed DSEE 6.2 and DSCC on a SPARC based Solaris 10 server. After following the Sun installation guide and accessing the DSCC panel, I tried to start a directory server instance. After entering all of the parameters, I cannot get the server instance started due to the following error.
    Could not contact the DSCC agent on ldap. Use the command cacaoadm to check that the DSCC agent is installed and running on port 11162.
    After this I verified the that cacaoadm was in fact running and operating on port 11162. I then tried changing the port numbers, and received the same error (although on a different port number). Can anyone advise me on a course of action to get this directory server up and running?
    Thanks

    Here is the dir listing:
    -rw------- 1 nobody nobody 0 Oct 28 20:37 import
    -rw------- 1 nobody nobody 16384 Oct 28 20:37 NetscapeRoot_uniquemember.db3
    -rw------- 1 nobody nobody 41 Oct 28 20:37 DBVERSION
    -rw------- 1 nobody nobody 16384 Oct 28 22:21 NetscapeRoot_uid.db3
    -rw------- 1 nobody nobody 16384 Oct 28 22:21 NetscapeRoot_sn.db3
    -rw------- 1 nobody nobody 16384 Oct 28 22:21 NetscapeRoot_givenName.db3
    -rw------- 1 nobody nobody 16384 Oct 31 09:55 NetscapeRoot_parentid.db3
    -rw------- 1 nobody nobody 16384 Oct 31 09:55 NetscapeRoot_objectclass.db3
    -rw------- 1 nobody nobody 16384 Oct 31 09:55 NetscapeRoot_numsubordinates.db3
    -rw------- 1 nobody nobody 90112 Oct 31 09:55 NetscapeRoot_nsuniqueid.db3
    -rw------- 1 nobody nobody 204800 Oct 31 09:55 NetscapeRoot_entrydn.db3
    -rw------- 1 nobody nobody 81920 Oct 31 09:55 NetscapeRoot_cn.db3
    -rw------- 1 nobody nobody 40960 Oct 31 09:55 NetscapeRoot_ancestorid.db3
    -rw------- 1 nobody nobody 16384 Oct 31 09:55 NetscapeRoot_aci.db3
    -rw------- 1 nobody nobody 942080 Oct 31 10:14 NetscapeRoot_id2entry.db3

  • Can we install a new mssql cluster on the same windows cluster which already containes a mssql cluster with named instance

    We have a MSSQL 2008R2 Enterprise edition with a two node active passive fail-over cluster running on 2008R2 windows cluster with out any issues,
    Now my question is can we add one more MSSSQL cluster instance for the same setup with out disturbing the existing one ?
    Also give thoughts on load sharing as the second node is mostly ideal now except fail-over scenarios,
    Why we go for this situation is because of the collation setting which can be set only one per instance(Database collation setting change not working), we need a different default collation for the new setup

    hi,
    >>Now my question is can we add one more MSSSQL cluster instance for the same setup with out disturbing the existing one ?
    Yes it is possible .You need to add new drives as cluster aware and install SQL server and put data and log files on thse drives.YOu would need to create named instance of SQL server and need to create different resource group.Both old installation and new
    onw would work separately.
    >>Also give thoughts on load sharing as the second node is mostly ideal now except fail-over scenarios,
    Good point indeed.You are about to create Multi instance cluster and should plan for scenario where one node is down and other node is handling load for both instances.Memory and CPU should be enough to handle the load.
    >>Why we go for this situation is because of the collation setting which can be set only one per instance(Database collation setting change not working), we need a different default collation for the new setup .
    Just for collation if you are installing new instance seems little wierd to me.You can manage collation at column ,database and at server level.
    http://technet.microsoft.com/en-us/library/aa174903(v=sql.80).aspx
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Can`t start oracle instance 11gR2 on Ubuntu 10.4

    I noticed something that some diretories are named using my hostname (phoenixbai) while others use localhost.
    e.g.
    ./cdata/localhost
    ./localhost_ora11g
    ./localhost_ora11g/sysman/emd/upload/localhost_host_host_configuration_old
    ./oc4j/j2ee/OC4J_DBConsole_localhost_ora11g
    ./log/phoenixbai （DIR）
    when I rename localhost in ./oc4j/j2ee/OC4J_DBConsole_localhost_ora11g, ./localhost_ora11g with phoenixbai, i can start the oracle instance.
    but still, I can`t start lsnrctl & emctl. here is the listener.ora, tnsnames.ora, and /etc/hosts details:
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
          (ADDRESS = (PROTOCOL = TCP)(HOST = phoenixbai)(PORT = 1522))
    ADR_BASE_LISTENER = /u01/oracle
    ORA11G =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = phoenixbai)(PORT = 1522))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = ora11g)
    EXTPROC_CONNECTION_DATA =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
        (CONNECT_DATA =
          (SID = PLSExtProc)
          (PRESENTATION = RO)
    LISTENER_ORA11G =
      (ADDRESS = (PROTOCOL = TCP)(HOST = phoenixbai)(PORT = 1522))
    127.0.0.1     phoenixbai     localhost.localdomain     localhost
    127.0.1.1     phoenixbai     phoenixbai
    127.0.0.1     localhost     localhost
    #127.0.0.1       phoenixbai      phoenixbai
    #127.0.1.1       localhost       localhost
    # The following lines are desirable for IPv6 capable hosts
    ::1     localhost ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    ff02::3 ip6-allhostsAnyone any idea?
    Please help! if you need any more info, let me know!

    Hi;
    Duplicate post:
    http://forums.oracle.com/forums/thread.jspa?threadID=1111584&tstart=0
    If possible please change this thread status to answered(dublicate post), it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
    Regard
    Helios

  • Can not start SAP instance after change the profile

    Dear all
    We use system copy to build SAP system.
    Source
    Ecc 6.0(64 bit)
    Windows Server 2008 SP2
    SQL Server 2008 SP2
    Target
    Ecc 6.0(64 bit)
    Windows Server 2008 SP2
    SQL Server 2008 SP2
    In target system, we want to use the instance profile as source system,
    but after copy from source system we find that if parameter em address_space_mb = 512 in the profile,
    we can not start SAP instance.
    Could anyone explain it?
    Best regards
    Shirley

    Hi Shirley,
    I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
    If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
    Regards,
    Paul

  • CRS Can not start instance PRKP-1001

    Hello
    I have a 2 node database and on the first node I can not start the instance using srvctl start instance it gives the following error: PRKP-1001 : Error starting instance htdb1 on node telepin1. When I start it using sqlplus it is ok.
    Can someone please explain?
    Thanks

    Do you also see CRS-0215? There's a known problem , when parameter sqlnet.inbound_connect_timeout is set in sqlnet.ora, it should be unset. Unfortunately the error is a little bit generic, if this parameter is currently not set, you have another problem.
    Werner

  • How can I set my database instance to start in OPEN mode after my computer

    Hi all,
    Sometime, I have to reboot my computer. After it rebooted, my instance is automaticaly executed. But, my database is not set to the OPEN mode (automaticaly). On some development computers, my status is set to OPEN after a reboot. On some computers, the local database is set to the IDLE instance.
    How can I set my database instance to start in OPEN mode after my computer has rebooted?
    Thank your for any help.

    but i could not run command emctl start dbconsolor lsnrctl..
    What error you are getting? If you are not able to run both of them then the ORACLE_HOME is not set properly.
    i set oracle_home and oracle_sid in thereWhere? Is it set in your user variable part of system variable. It is good to set it in the system variable, so that it will be common for all the users who use the system.
    To check whether the variable is set or not go to the command prompt and type
    setIf you see your ORACLE_HOME variable then it is set or else not.

  • Can't we start a RAC instance without local pfile ?

    DB version : 11.1.0.7.0
    OS : Solaris 10 SPARC
    --Info about the cluster
    2 Node RAC
    Both instances using spfile stored in ASM Diskgroup
    Passwordless SSH configuration is not working currently (i gather ssh is not mandatory after installation)
    We have 7 RAC DBs running in our 11.1 CRS.
    After a reboot of our 2 Node RAC servers, in Node2, 4 instances didn't come up.
    None of these down instances have a local pfile. The ones that are up in Node2 have it.
    So, When i manually tried to bring up the ones that are down
    $ sqlplus / as sysdba
    SQL*Plus: Release 11.1.0.7.0 - Production on Fri Mar 2 21:28:22 2012
    Copyright (c) 1982, 2008, Oracle.  All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/u01/app/oracle/product/11.1/db_1/dbs/initorcl2.ora'
    SQL> exit
    Disconnected-- Tried directly with spfile (No such option in oracle, but still tried ! )
    SQL> startup spfile='+ORCL_DATA01/ORCL/spfileorcl.ora'
    SP2-0714: invalid combination of STARTUP options-- Tried from Node1
    -- This might have failed because ssh is not working currently. Not sure
    $ srvctl start instance -d orcl -i orcl2
    PRKP-1001 : Error starting instance orcl2 on node manhclust199
    CRS-0215: Could not start resource 'ora.orcl.orcl2.inst'.
    $ srvctl start database -d orcl
    PRKP-1001 : Error starting instance orcl2 on node manhclust199
    CRS-0215: Could not start resource 'ora.orcl.orcl2.inst'.Finally I had to create a local pfile on node2 for each instances in OH/dbs
    The content of each local pfile is like
    $ cat initorcl2.ora
    spfile='+ORCL_DATA01/orcl/spfileorcl.ora'Now the startup worked without any issue for all 4 instances
    SQL> startup
    ORACLE instance started.
    Total System Global Area 2137886720 bytes
    Fixed Size                  2155464 bytes
    Variable Size            1593838648 bytes
    Database Buffers          536870912 bytes
    Redo Buffers                5021696 bytes
    Database mounted.
    Database opened.So, local pfile is mandatory for all RAC instances ?

    Hi,
    My question is whether this instance specific local pfile must be there in OH/dbs directory ?YES
    Didn't get a clear answer yet.
    It seems that it is mandatory. And this is most probably the reason these instances didn't come up after the reboot of this node.Startup Sequence:
    Startup of Cluster:
    Using "srvctl" to start your database/instance:
    Srvctl read the OCR and check the parameter SPFILE from your database registration:
    If parameter SPFILE in OCR have a value the srvctl will use this value to start your database instance.
    If parameter SPFILE in OCR don't have a value (i.e null) Oracle will try find the file SPFILE<ORACLE_SID>.ora on $ORACLE_HOME/dbs
    If the file SPFILE<ORACLE_SID>.ora does not exists, Oracle will try use the file init<ORACLE_SID>.ora
    If init<ORACLE_SID>.ora does not exist... the startup will fail.
    From ORACLE_HOME of your database execute command above to get value of Spfile parameter on OCR:
    srvctl config database -d <DB_NAME> |grep SpfileStartup manually from SHELL using SQLPLUS:
    Using SQLPLUS to start a database Oracle always first use SPFILE<ORACLE_SID>.ora stored on $ORACLE_HOME/dbs/ if this file does not exist he will try use INIT<ORACLE_SID>.ora to start Database Instance.
    If your spfile is stored on ASM you must create a INITFILE pointing to SPFILE stored on ASM.
    e.g From instance 1
    cat /oracle/oracle/product/11.2.0/db_1/dbs/initorcl1.ora
    SPFILE='+DATA/ORCL/spfileorcl.ora'Regards,
    Levi Pereira

  • Can't start OC4J instance

    hi all
    i can't start OC4J for forms , this happend after installed jdeveloper 10.1.3
    on IDS 10.1.2.0.2
    if any advice to help me in this issue
    thanks

    Don't install JDeveloper on top of any Oracle Home - install it in a separate directory.
    The install guide clearly states so - http://www.oracle.com/technology/products/jdev/htdocs/10.1.3.1/install.html#install_start_windows

  • Can't start J2EE Engine

    Hi.
    I can't start my local J2EE Engine after a workplace SP11 installation.
    OS: Windows 2000 Pro.
    JRE: 1.4.2_07
    Below you see the developer trace that is displayed when I try to start the J2EE Engine.
    // -Fredrik
    trc file: "C:\usr\sap\J2E\JC00\work\dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 1868
    system name : J2E
    system nr.  : 00
    started at  : Wed Apr 27 10:43:48 2005
    arguments   :
        arg[00] : C:\usr\sap\J2E\JC00\j2ee\os_libs\jcontrol.exe
        arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_wkx4590
    [Thr 1844] Wed Apr 27 10:43:48 2005
    [Thr 1844] *** ERROR => Invalid property value [box.number/J2EJC00wkx4590] [jstartxx.c   808]
    [Thr 1844] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   808]
    JStartupReadInstanceProperties: read instance properties [C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties;C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : wkx4590
    -> ms port    : 3601
    -> OS libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> files [01] : C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : wkx4590
    -> ms port    : 3601
    -> os libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID4431400  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID4431450  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID4431400            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] ID4431450            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [02] sdm                  : C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
    [Thr 1844] *** ERROR => can't adjust privileges (rc=1300) [jstartnt.c   1058]
    [Thr 1844] *** ERROR => can't set privilege (rc=-1) [jstartnt.c   963]
    [Thr 1844] JControlCloseProgram: started (exitcode = -1)
    [Thr 1844] JControlCloseProgram: good bye... (exitcode=-1)

    Hi Fred,
    have a look at this discussion that solved exactly the same problem as yours: Re: Web AS J2E instance 0 Installation problem.
    The solution most probably will be that you change the value of the jstartup/trimming_properties property in your instance profile from "standard" to "off".
    Good luck!
    Message was edited by: Ivaylo Ivanov

  • Can't start ASM,help me

    Help I can't start ASM on rhel4(32bit) + oracle 10G 10.2 RAC
    Wed Jun 28 17:10:40 2006
    Error: KGXGN polling error (15)
    Wed Jun 28 17:10:40 2006
    Errors in file /oracle/product/10.2.0/db/admin/+ASM/bdump/+asm1_lmon_24375.trc:
    ORA-29702: error occurred in Cluster Group Service operation
    LMON: terminating instance due to error 29702
    Wed Jun 28 17:10:40 2006
    Dump system state for local instance only
    System State dumped to trace file /oracle/product/10.2.0/db/admin/+ASM/bdump/+asm1_diag_24363.trc
    Wed Jun 28 17:10:40 2006
    Trace dumping is performing id=[cdmp_20060628171040]
    Wed Jun 28 17:10:41 2006
    Shutting down instance (abort)
    License high water mark = 2
    Wed Jun 28 17:10:45 2006
    Instance terminated by LMON, pid = 24375
    Wed Jun 28 17:10:46 2006
    Instance terminated by USER, pid = 29540
    Wed Jun 28 17:10:47 2006
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    WARNING: No cluster interconnect has been specified. Depending on
    the communication driver configured Oracle cluster traffic
    may be directed to the public interface of this machine.
    Oracle recommends that RAC clustered databases be configured
    with a private interconnect for enhanced security and
    performance.
    Picked latch-free SCN scheme 2
    Using LOG_ARCHIVE_DEST_1 parameter default value as /oracle/product/10.2.0/db/dbs/arch
    Autotune of undo retention is turned off.
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.1.0.
    System parameters with non-default values:
    large_pool_size = 12582912
    spfile = /dev/raw/raw3
    instance_type = asm
    cluster_database = TRUE
    instance_number = 1
    remote_login_passwordfile= EXCLUSIVE
    background_dump_dest = /oracle/product/10.2.0/db/admin/+ASM/bdump
    user_dump_dest = /oracle/product/10.2.0/db/admin/+ASM/udump
    core_dump_dest = /oracle/product/10.2.0/db/admin/+ASM/cdump
    asm_diskgroups =
    Cluster communication is configured to use the following interface(s) for this instance
    203.144.222.81
    Wed Jun 28 17:10:48 2006
    cluster interconnect IPC version:Oracle UDP/IP
    IPC Vendor 1 proto 2
    PMON started with pid=2, OS id=29735
    DIAG started with pid=3, OS id=29737
    PSP0 started with pid=4, OS id=29739
    LMON started with pid=5, OS id=29741
    LMD0 started with pid=6, OS id=29743
    LMS0 started with pid=7, OS id=29745
    MMAN started with pid=8, OS id=29755
    DBW0 started with pid=9, OS id=29757
    LGWR started with pid=10, OS id=29759
    CKPT started with pid=11, OS id=29761
    SMON started with pid=12, OS id=29763
    RBAL started with pid=13, OS id=29765
    GMON started with pid=14, OS id=29767
    Wed Jun 28 17:10:48 2006
    lmon registered with NM - instance id 1 (internal mem no 0)
    Wed Jun 28 17:12:59 2006
    Error: KGXGN polling error (15)
    Wed Jun 28 17:12:59 2006
    Errors in file /oracle/product/10.2.0/db/admin/+ASM/bdump/+asm1_lmon_29741.trc:
    ORA-29702: error occurred in Cluster Group Service operation
    LMON: terminating instance due to error 29702
    Wed Jun 28 17:13:01 2006
    Shutting down instance (abort)
    License high water mark = 1
    Wed Jun 28 17:13:03 2006
    Instance terminated by LMON, pid = 29741
    and trace file
    /oracle/product/10.2.0/db/admin/+ASM/bdump/+asm1_lmon_29741.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    ORACLE_HOME = /oracle/product/10.2.0/db
    System name: Linux
    Node name: aadb01
    Release: 2.6.9-34.ELsmp
    Version: #1 SMP Fri Feb 24 16:54:53 EST 2006
    Machine: i686
    Instance name: +ASM1
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 5
    Unix process pid: 29741, image: oracle@aadb01 (LMON)
    *** SERVICE NAME:() 2006-06-28 17:10:48.174
    *** SESSION ID:(46.1) 2006-06-28 17:10:48.174
    GES resources 1890 pool 4
    GES enqueues 2510
    GES IPC: Receivers 2 Senders 2
    GES IPC: Buffers Receive 1000 Send (i:830 b:830) Reserve 81
    GES IPC: Msg Size Regular 388 Batch 4096
    Batching factor: enqueue replay 99, ack 110
    Batching factor: cache replay 71 size per lock 56
    kjxggin: receive buffer size = 32768
    *** 2006-06-28 17:10:48.509
    kjxgmrcfg: Reconfiguration started, reason 1
    kjxgmcs: Setting state to 0 0.
    *** 2006-06-28 17:10:48.509
    Name Service frozen
    kjxgmcs: Setting state to 0 1.
    kjfcpiora: published my fusion master weight 5622
    kjfcpiora: publish my flogb 9
    *** 2006-06-28 17:11:53.883
    =====================================================
    kjxgmpoll: CGS state (0 1) start 0x635d41bb cur 0x672b6877 diff 0x3ce26bc
    =====================================================
    Group name: +ASM
    Member id: 0
    Cached KGXGN event: 0
    Group State:
    State: 0 1
    Reconfig started start-tm 0x635d4173 tmout period 0x7270e00
    Commited Map: 0 1
    New Map: 0 1
    KGXGN Map: 0 1
    Master node: 0
    Memcnt 0 Rcvcnt 0
    Substate Proposal: false
    Inc Proposal:
    incarn 1 memcnt 2 master 0
    proposal true matched false
    map: 0 1
    Master Inc State:
    incarn 1 memcnt 2 agrees 1 flag 0xa
    wmap: 1
    nmap: 0 1
    ubmap:
    Substate Handler Execution State
    substate 0 status done
    substate 1 status done
    substate 2 status done
    substate 3 status done
    substate 4 status done
    substate 5 status done
    substate 6 status done
    *** 2006-06-28 17:12:59.243
    =====================================================
    kjxgmpoll: CGS state (0 1) start 0x635d41bb cur 0x6af9582a diff 0x79c166f
    =====================================================
    Group name: +ASM
    Member id: 0
    Cached KGXGN event: 0
    Group State:
    State: 0 1
    Reconfig started start-tm 0x635d4173 tmout period 0x7270e00
    Commited Map: 0 1
    New Map: 0 1
    KGXGN Map: 0 1
    Master node: 0
    Memcnt 0 Rcvcnt 0
    Substate Proposal: false
    Inc Proposal:
    incarn 1 memcnt 2 master 0
    proposal true matched false
    map: 0 1
    Master Inc State:
    incarn 1 memcnt 2 agrees 1 flag 0xa
    wmap: 1
    nmap: 0 1
    ubmap:
    Substate Handler Execution State
    substate 0 status done
    substate 1 status done
    substate 2 status done
    substate 3 status done
    substate 4 status done
    substate 5 status done
    substate 6 status done
    kjxgmpoll: terminate the CGS reconfig.
    Error: KGXGN polling error (15)
    error 29702 detected in background process
    ORA-29702: error occurred in Cluster Group Service operation
    ksuitm: waiting for [5] seconds before killing DIAG

    Modify the classpath as follows.
    set JAVA_HOME=C:\JDK1.3.1
    set ANT_HOME=C:\jakarta-tomcat
    set TOMCAT_HOME=C:\jakarta-tomcat
    set CLASSPATH=%CLASSPATH%;C:\jdk1.3.1\lib\tools.jar;JAVA_HOME\lib;
    Modify the Path as follows
    set PATH = %PATH%;%JAVA_HOME%\bin;%TOMCAT_HOME%\bin

Maybe you are looking for