Can't start up past gray screen on iMac G4 flat panel

My iMac G4 flat panel is messed up right now and I'd appreciate any help I can get here.
This morning after I realized my internet wasn't working I tried a restart but the restart stalled around the part where it just shows your desktop picture and wouldn't fully shut down. I watched this for about ten minutes and then held down the power button on the back to shut down. When I tried starting back up, it would just get to the gray screen with the apple and spinning gear and stall out there. The gear keeps spinning but I can tell from listening that the computer is not doing anything, and it just stays like that for a long time. My OSX disks are in Toronto and I'm here in Kingston, but I was able to start up off my housemate's ibook start up disk and run disk utility. Disk Utility said there was no problems with the disk, I told it to repair anyways and it told me no repairs were needed. However, when I tried to restart off the hard drive, gray screen again.
I know there's been some similar threads here, but I haven't found much help from them. If anyone can give me some advice as to what is making my iMac stall out like this, I'd really appreciate it.

check out the screen I get when I hold command at startup, what does this mean? none of the keyboard buttons respond to this or the mouse, except the return key which brings me back to the grey screen hanging forever.
iMac g4 flat panel Mac OS X (10.4.6)

Similar Messages

IBook will not start up past gray screen w/ apple logo

iBook will not start up past gray screen w/ apple logo. So I have zeroed out the hard drive and reinstalled tiger. No change except if I start up holding shift it will boot and welcome comes up then black screen that says you must restart by holding down power key.
Zeroed out the HD again with same results. Also I have a iBook G3 with the same symptoms.

What you are experiencing is a kernel panic.
Try starting up from the Mac OS X Install Disc by inserting the disc and restarting your computer, holding down the C key as the startup chime is ending. Then choose Installer > Open Disk Utility (in Panther) or (in Tiger) click 'Next' at the language screen and choose Utilities > Disk Utility and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive.
Once you have repaired the hard drive with the Install disc's Disk Utility, then try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if a little hard drive maintenance helps things out.

Can't get past gray screen after Boot Camp Assistant

So last night I decided it was time to start experimenting with Boot Camp and Windows XP Pro. I fired up Boot Camp Assistant and allocated a 32gb partition of my HD for the XP install. When prompted, I put in the XP Pro CD and restarted. It booted into the XP install utility, but when asking about which partition to use, instead of the 32gb partition, all I saw was a 131gb partition. Thinking that it was my OS X partition, I decided to cancel out of the install and do some more investigating. When it restarted, all I got was a blank gray screen, no spinning gear, no logos, nothing. When rebooting while holding down a mouse button, I was able to eject the Windows XP cd. Here's what I've tried so far:
CDs: Leopard, Original OS X Disk 1, Windows XP, None
Keys: none
Result: Gray screen
Keys: option
Result: Gray screen with mouse pointer that initially is moveable, but then freezes
Keys: c
Result: Gray screen
Keys: d
Result: Gray Screen
Keys: shift
Result: Gray Screen
Keys: command + r + p
Result: Gray Screen
Holding power button
Result: Long tone while starting up, then gray screen.
What can I do?? I'm thinking that Boot Camp fried my HD partition data, but I can't seem to access any of the boot disks or any sort of disk utilities

I did. I took it into the Apple store and they replaced my hard drive. It was under warranty, so it wasn't a problem. I got them to give me my old hard drive back, which I hooked up to an external SATA enclosure. My mac recognized it, but said it wasn't initialized. I downloaded Data Rescue II and it recovered all of my software. I'm now using it as a Time Machine disk.
After further research, I found out the my main problem was that I used Windows XP SP1. You NEED to use SP2, otherwise, this problem will occur. I figured I could just upgrade later, but nope, you need a native SP2 disk.
If your Mac isn't under warranty, try this post:
http://phail.net/2008/04/10/bootcamp-windows-xp-sp1-epic-phail/
and his solution:
http://phail.net/2008/04/13/bootcampsp1-white-screen-of-death-a-solution/
In short, you need another Leopard computer. I bet if you print out the instructions and take them to the Apple store with you, the Genius Bar will help you, they've always been super helpful/nice with me.
Good luck!!

IMac Does not boot past Gray Screen

iMac does not boot past Gray Screen. 2008 24" Intel iMac running Mountain Lion with 1TB hard drive.
Problem started yesterday while I was web surfing, and my iMac frooze and shutdown. I rebooted and could only get as far as the gray screen.
On bootup the following things happen:
Startup tone
Gray screen with Apple, and gear spins below Apple.
Once the gear stops spinning, nothing happends.
Troubleshooting steps I have tried:
removed all devices connected to iMac and rebooted, but same symptons occur.
booted into Safe mode and run disk utilites.
     Disk Utilities found no errors on the drive, but did find two permission issues that it was able to fix.
          First permission issue:
                   "Group differs on library; Should be 0; group is 80"
          Second permission issue:
                    "Permissons differ on library; Should be drwxr-xr-x; They are drwxrwxr-t"
Disk Utilities says it fixes these issues and then I reboot, but get the same problem.
I reboot back into Safe Mode and run Disk Utilities and it discovers the same problems listed above with Permissions. It says it fixes them, I reboot, but the same problem occurs. Its as if we are stuck in some sort of loop process.
Booted into Single User Mode and ran the following command:
     /SBin/fsck -fy   it reports back, Volume Apprears to be ok.
I reboot, same issue !
Performed SMC Reset, Rebooted, same issue
Performed PRAM Reset, Rebooted, same issue.
Booted into Recovery Partitioin (Command R) and ran disk utilities. It found the same permission issues listed above. It fixed them. I rebooted. Same problem still.
While in safe mode, I preformed a full time machine backup.
I am out of ideas. Any help would be greatly appreciated.

Hello,
I reboot back into Safe Mode and run Disk Utilities and it discovers the same problems listed above with Permissions.
You can ignore repeated "fixes" it's not really a problem, if it says completed repairs that's all that's needed.
Luckily it boots in Safe Mode, here's basically the steps to try to find out what it is...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Though I'm suspecting some corruption to your OS at the moment.

Intel iMac will not boot past gray screen

Intel iMac will not boot past gray screen
my system:
new (month old) 24" intel imac, 2.8 ghz, 4 gb ram.
running: leopard (upgraded from tiger, which was pre-installed at purchase), installed 10.5.1 update right before this huge problem occurred.
install discs on-hand: two-disc tiget set, single leopard upgrade disc.
what led to this:
i wanted to install windows using bootcamp on a 50 gb partition.
at this point i was running leopard 10.5
i followed all bootcamp instructions, printing out the guide, as well. once i got into the windows setup, i was prompted to choose a partition to install windows. unlike the bootcamp guide, which showed three partitions, one clearly labeled "bootcamp", i saw only one partition. not wanting to risk writing over my mac partition, i quit the setup and rebooted the mac os. after some googling around, i looked for firmware updates (didn't need any), and then software updates. i decided to try updating to 10.5.1.
i then ran through boot camp again, deleting my previous windows partition, creating a new one, and moving forward as before. once again, i was only shown one partition to choose from in the windows setup. i exited the setup again to reboot through the mac os, but this time, i was only given a blank gray screen.
here's what i have tried so far:
booting from a CD, holding down the C or D keys: no response (in fact, i have to restart the computer holding down the mouse button to be able to eject the CD)
booting with option key held down: gray screen
booting with option key held down with external bootable firewire drive attached: the firewire drive appears as a boot icon, and i can click on it within a five second window, but then the screen freezes after that time period, and nothing changes
booting into target mode while attached to another mac: gray screen (no firewire icon, and drive never shows up on other mac)
resetting NVRAM: i'm able to hear the boot chimes, but no difference in performance. gray screen every time
Safe boot: nothing but a gray screen
Verbose mode: gray screen
Single user mode: gray screen
Single user mode with firewire drive attached: occasionally (not every time), i am able to get the white on black terminal to show up. from here, i'm able to run fsck, but it appears to only be checking the firewire drive. i have tried several times to boot from here, and once it took me to a blue screen with movable arrow cursor, but it never went beyond this.
is there anything else left to try before taking it to apple?
any help would be greatly appreciated.
thanks,
Casey Burns
Casey Burns Illustration and Design
http://CaseyBurns.com

I'd call Apple support at this point. You'll need
to put this issue on the record.
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
The wait may be long for an agent to come on the line
so expect that and have some other stuff to do in the meantime.
If you have the applecare protection plan, I'd ask about "onsite"
service.
I like your work ! Good luck !
Slim
Message was edited by: slimpikkunz

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Computer won't boot past gray screen

I can't get my computer to boot past gray screen. It keeps showing the apple logo and the spinning wheel. What can I do to get into my system?

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

My MacBook Pro shuts down within seconds after starting with a Gray Screen and Apple Logo, a bar comes at the bottom.

My MacBook Pro starts with a Gray Screen and Apple Logo, a bar comes at the bottom, but after few seconds the machine shuts down. This was bought approx 1 year back. Please help!!

jayanta.ray,
which model MacBook Pro do you have (did you buy it new?), and which version of OS X is installed on it?

How to get past gray screen on MacBook?

How to get past gray screen on MacBook?

Here are some initial things to try.
http://support.apple.com/kb/ts2570
http://lifehacker.com/how-to-troubleshoot-the-four-most-common-oh-sh-t-mac-48708 0511

Start up with gray screen

I have a iMac G4 flat panel, I had a kernal panic and the computer told me to restart. I dod and now all I get is a gray screen with no apple...
is there anything I can do, soes it sound like a hardware or software issue???
thanks
Jarrod

You can do a reinstall as follows:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

HT3964 After updated to Maverick system is not starting , keeping light gray screen without progress

I updated first to Mountain Lion my Mac becomes slow, after trying to solve I updated again to Maverick. But my Mac after becomes slow not starting, so I restore a backup, but now some times doesn't start, stops on gray screen ...
I tried comm opt p r and other commands but still not solve. Should I format and install new system from zero?

HCQuintao,
try this first: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still stop on the grey screen?

Can not burn or read dvd/cd's on imac g4 flat panel

Hello
Just recently I am having a great deal of trouble burning dvd's or cd's. If I manage to get a dvd or cd to burn(which is very rare that I do manage to get them to burn) they will no longer mount on my computer after I have ejected them from the computer. I get the same result wether using toast or the Disk Utility. My local Apple reseller sugested the drive was ok but had a coruption in the software. So I did a full and complete wipe of the system and freshly re-installed teh whole system. I am still getting the same problem.
The error messages I'm getting are "medium error xxxxx" or can not calibrate lazer level.
I have cleaned the dvd drive and I have made sure all disks are clean before using.
So any help would be appreciated.

check out the screen I get when I hold command at startup, what does this mean? none of the keyboard buttons respond to this or the mouse, except the return key which brings me back to the grey screen hanging forever.
iMac g4 flat panel Mac OS X (10.4.6)

Can't get past gray screen with progress indicator... Help

I can't turn on my Macbook. It starts but won't go past the gray screen with the progress indicator (spinning circle).
I have tried:
1. turning off, removing battery, holding start for 5+ seconds, replacing battery and then turning on.
2. Holding command + option + R + P while staring up, waited for 3+ chimes.
3. holding Shift down while starting up
none of these things are working.
I've been on hold with apple service/support for almost an hour now.
I have an assignment on the computer that is due by midnight.
HELP!
I'm not very computer savvy and this is my first mac.
Any ideas folks??
Thanks.
Macbook Mac OS X (10.4.7)

You've done all the standard procedures. If you have any peripherals attached, disconnect them.
This describes resetting the PMU:
http://docs.info.apple.com/article.html?artnum=303319
Did you have the AC disconnected when you did it? I don't have any other ideas.
These are the startup key options:
http://docs.info.apple.com/article.html?artnum=303124
Edit: If you have the install disc stuck in it anyway, can you get the hardware test to work? (Reboot while pressing the D key.)

Can't get past gray screen with file icon on it

When i turn on my computer the power light goes out but the gray screen stays on. After two or three minutes an icon of a file with a question mark appears. I cannot get past this screen. I have removed my battery and tried again. I have also tried the other processes for a computer that won't turn on. In my case the computer does turn on just never gets past this gray screen. Please someone help me

The question mark on the file tells you that your MacBook wants to start up but can't find a viable OS to start from. Can you start up from the DVD that came with your Mac? If so, go to Disk Utility and see if you can repair the internal hard drive. If you can't see the hard drive from within DU, your drive may have failed, and you may need to replace it. Good luck.

Can't get past gray screen

I posted earlier about a problem that resulted from installing the usual software updates that pop up periodically. Initially I posted that after the restart, the screen was blue with a wide black vertical line on the right side. With closer observation I noticed that before that happens, the screen kind of changes color from a purplish tint. If I leave it powered on, the blue screen with the black line eventually disappears and it just becomes a gray screen. Because I haven't seen any icon of a blinking question mark I still have hope that my hard drive isn't dead! Can anyone please offer any advice?
I have tried starting it in safe mode but nothing happens. I also tried holding command/option/P/R and that just did the same thing with the line.
I am looking for my original disks but have not found them yet!

1) try to boot from the install cd-dvd
(if this doesn't work)=>
2) Try to connect it to an external monitor. (if this shows an image on the external display your lcd is broken)
(if this does not show an image) =>
3)your motherboard is probably
broken (that is the graphics card integrated on your motherboard)

Can't start up past gray screen on iMac G4 flat panel

Similar Messages

Maybe you are looking for