Can't start Windows Sharing. It unchecks itself, after clicking to enable!

Can anyone tell me how to rectify this situation: When clicking to enable Windows Sharing a checkmark shows up as expected, then 2 seconds later disappears!
It was working once. Disabled Windows Sharing to do some troubleshooting, and now can't enable it again.
Thanks!
iBook 900MHz G3   Mac OS X (10.3.9)  

Usually a disappearing checkmark means that startup failed at some point after you enabled it, as is obvious, but that means that you have to look in the system logs for any clues as to why it failed to startup. In the Utilities folder in Applications there is a program called Console. Starup the app and then slect the "Logs" button in the upper left. You'll see a list of log files on the left. Basically you have to learn what each of these is but check console.log and system.log to start with. Trying looking at these immediately after clicking on the "Windows Sharing" button and see if anything new shows up.

Similar Messages

  • I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

  • I can't start windows 7 normally from Boot Camp

    I can't start windows 7 normally from Boot Camp.
    It was running fine since I have installed it 7 months ago, but now it can't start or (restart) normally (safe mode is ok). It displays a black screen after showing the logo, and I have to shut down the machine. My Mac system is working fine. Mac technician (Genius Bar) has run a surface scan to verify hd integrity and proofed ok, but could not give any advice on Windows issues.
    Please advice if anything I should do before cleaning up my partition and reinstall Windows.

    I would guess and sorry for asking but you already tried booting from Windows 7 DVD and doing auto repair?
    There are dozens of things to look at and do, and begin with chkdsk in Windows, yes but that only looks at one aspect. You can't really check for bad sectors on a drive's sectors. The best? to use the drive vendor's own utility actually, often with a linux boot CD or Windows program (they don't make Mac OS versions, one reason I first installed Vista over 5 yrs ago)
    Restore check points
    Uninstall last update or driver
    Clean the system of debris temp files, caches, registry errors, fonts and left overs
    make sure you have 20% and 12GB free space or more
    A hard shutdown can create more problems.

  • How can I start windows 8 without useing my password

    how can I start windows 8 without useing my password

    Hi,
    Review the information posted in this thread.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Can we start Windows Phone 10 ? If yes, please tell me what is the software requirements.

    Dear Sir/Mam,
    Please give me a suggestion for...
    Can we start Windows Phone 10 ? If yes, please tell me what is the software requirements.  
    Thanks & Regards,
    SrinivaaS.

    For information on the Windows Phone 10 preview please see the Windows Insider forums on
    http://answers.microsoft.com/en-us/insider/forum .
    Information about developing for Windows Phone 10 will be available at the
    Build conference at the end of April.
    Announcing the first build of Windows 10 Technical Preview for Phones
    A first look at the Windows 10 universal app platform

  • Can only start Windows 7 (installed with bootcamp)  in safe mode

    I installed Windows 7 about 3 weeks ago, everything has gone smoothly until a few days ago. I can only start Windows in safe mode, if I try to do it in normal mode, it starts to log in but the screen will just go black and the computer will shut off completely. Then it won't turn back on for like 5 minutes. My mac partition works fine, and I can't find a solution to this Windows problem. When I try to do the "restore' thing where you make it go back to a certain install point, it gives me an error. Please help me, I have a course starting in 3 days and I need Windows OS for it.

    Post your question in the BootCamp forum.

  • Can a pdf be made to disable itself after 12 months? So the user has to download a current pdf ?

    Can a pdf be made to disable itself after 12 months? I am interested in sending a pdf formatted price list to a customer, but after 12 months I want the pricelist pdf to disable itself, so the individual has to download a current version of the price list.  Is this possible?

    May be possible with following server product:
    http://www.adobe.com/products/livecycle/rightsmanagement/

  • Reminders window won't show up after clicking in notifications center

    After clicking a notificytion in notifications center on Mavericks the APP Reminders opens but the application window is not showing up. Allways worked like a charme but not any longer for me.
    I tried to:
    1) uncheck the iClound sync for Reminders while Reminders.app ist closed which deletes all local data!
    2) logout my user
    3) login again
    4) open Reminders
    5) check the iCloud sync for Reminders again
    After this procedure, Reminder is working again for a day, then again the Reminders window is not showing up, after clicking a notification or open the Reminders.app manualy.
    Why is this, any hints?
    Cheers

    In addition: after I went thru the steps above the applications runs without problems until I close the app again. When now reopening the app will show no windows.

  • Can we remain in the same state even after clicking submit button?

    Hello All,
    Can we remain in the same stage even after clicking submit button? Also it should remain in the same stage only when certain conditions are met. For eg:
    Condition : In Stage1, CustomFieldA default value is 'No'. To pass from Stage1 to Stage2 the CustomFieldA value should be made to yes.
    Scenario 1 : CustomFieldA value is 'No', and I click on Submit .
    Expected Result : should remain in the same stage
    Is above result achievable in PS 2013? I am creating workflow in Visual Studio 2012, so can I handle this in the workflow?
    Please help.

    The above answer was proved wrong, so please follow this link to get the answer.
    http://social.msdn.microsoft.com/Forums/en-US/8c75d74d-1ea6-4273-96cd-e70f5a5688fc/how-to-remain-in-the-same-stage-even-after-clicking-submit-button?forum=project2010custprog

  • Can't install photoshop elements 12 since it can't start windows installer

    Hi,
    I have got a new PC and now try installing my Photoshop Elements 12. The installation program tries to start Windows installer:
    Sorry the message is in Swedish. In English it would probably be "It was impossible to access the service Windows Installer. This can happen if the Windows Installer is not correctly installed. Contact the company's support for further help.
    I tried searching for downloads of Windows Installer, but there's no download version for Windows 7.
    Is there anybody else who faced such problem? How have you solved it?
    TIA
    MyPhoto

    Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

  • Delayed Write Failed - and now it can't start Windows

    Help!
    I'm in big trouble! I was using my Tecra 9100 (running XP Service Pack 2) and was looking at some of the files I had stored on my memory stick. I selected 'safely remove hardware' and pulled my memory stick out when I was finished. All of a sudden my laptop starts to run slowly and an error message popped up saying 'Delayed Write Failed'.
    This is a first for me, and I don't know why this popped up. I read what it had to say below the error - 'Windows was unable to save all the data for the file \Kaspersky (can't remember the exact name but it was to do with Kaspersky). The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.'
    My laptop became so slow it was unresponsive (although I could move the cursor around) and remained so for 10mins. I tryed Ctrl-Alt-Del, nothing happened. As I could't shutdown Windows, I was forced to hold the power off button for a few seconds to immediately switch it off. Upon switching my laptop back on, I noticed my bootscreen took about 15sec more than before and the blue screen showed up saying 'Windows needs to check your disk for constincency.'
    An hour or so later I logged back into my computer and noticed my cursor was rather jumpy and not as smoothe as before. It just wasn't right and about an hour or so later the same error popped up again and my laptop froze. After another power off, the blue screen showed up again saying 'Windows needs to check your disk for constincency' and this time I waited around 4 hours!
    When it was finally done, my laptop restarted automatically and the blue screen showed up again! This time cancelled the disk check and when straigh to the log in screen. I logged in and noticed the laptop wasn't up to speed as it was usually with the mouse being jumpy still. I decided to restart the laptop only to see the blue screen again.
    I let it go this time and just waited for it to scan. after about 20mins nothing appeared to be happening in the scan so I powered off. Now my computer is seriuosly messed up. When I switched it back on the screen which says Last know good configuration and start windows normally showed up.
    Now no matter what I select my laptop just restarts and says cannot proceed due to corrupt or damaged file in \Windows\System. You can attempt to repair this problem by inserting the Windows set-up disk.' Whats the Windows set-up disk?
    My laptop is second hand and came with no recovery disks ect. and has XP Pro already installed so i dont have disk. what on earth shall i do?
    help will be very appreiciated. thanx.

    Sounds like a mean software crash to me. I understand you need to rescue your data before you delete all your files and proceed with a recovery.
    What I would do in your situation (did it actually some days ago on a friend's notebook), is:
    1) remove the hard drive from my laptop (it's not that hard to do it yourself)
    2) purchase an empty external housing for a 2.5" drive to USB (about 10 US$)
    3) Install the removed drive into that new housing
    4) Backup all my important data at my Office/Friends Computer through the new adapter (you have access to all data areas of the hard disk through USB). Keep the HDD even leveled during this procedure as it might be a damaged drive due to wear and tear of the motor bearing... In such incidents you can hear a changing noise while altering the level of the drive during operation. Maybe you have to keep it in a vertical position to minimize the noises during the final rescue process of your data.
    Finally once everything is restored, I would:
    5) reinstall the Drive back into the notebook (in order to test its functionality) and do a proper recovery-CD installation.
    6) Purchase a new spare drive and have it ready, just in case the old drive reveals as broken.
    This is the easiest and most safe way to rescue your data.
    You might ask yourself: What caused this to my notebook:
    Here are some possible reasons:
    - a Virus/malware/incompatible program (30 % chance)
    - a broken hard disk (does it sound strange (noisy) lately?) (45 % chance)
    - a HDD controller/motherboard problem (10 % chance)
    - bad moment like an instant power loss or another undefined reason (15 % chance)
    Good luck,
    electroch@in
    BTW, my friend was very happy to have his broken 60GB Toshiba drive replaced with a new more silent 120GB Samsung drive.

  • Can't start Windows Media Player-New​be

    I am not a computer person.  Just bought a T61 and installed Kaspersky internet security.  Now trying to get things up and running.  When I click on Windows Media Player it flickers and does nothing.  I right click and click "run as" and get a multiple choice window that either asks me to uncheck a box and it allows the program to open that one time, or attempt to log in as administrator.  I can get into the program by unchecking the upper box and allow current user, but when I close the program I am back in the same boat as before, it won't open.  If I try to log in as administrator using my password, I am rejected.  I have verified my password, but no luck.  Lots of security on this system.  By the way, I am running XP Pro.......not vista.  I don't know if I am failing to set up the player or authorize some feature initially, or falling prey to the Thinkvantage security set up, or running into Kaspersky.  I notice Kaspersky gives me all sorts of warnings in general.  Help...   [email protected]

    Hello,
    I am not particularly familiar with Kaspersky Internet Security, but one thing that is typical with antimalware software is that when changing products, the old product has to be uninstalled completely before installing the new one.  In some cases, it is also necessary to reset the TCP stack before installing new antimalware software as well.
    Most ThinkPads I see have Symantec Norton Anti Virus pre-installed on them, so you will probably want to take the following steps to revert back to a "clean" state so you can load Kaspersky Internet Security:
    Download a copy of the Symantec Norton Removal Tool from http://www.symantec.com/symnrt and save it to a location you will remember, such as the Desktop.
    Save or print out a copy of Microsoft Knowledge Base Article 299357, "How to reset Internet Protocol (TCP/IP) in Windows XP"
    Uninstall Kaspersky Internet Security from your computer.  Reboot if prompted to do so.
    Run the Symantec Norton Removal Tool you downloaded.
    Follow the instructions in the Microsoft knowledge base article to reset the TCP stack [i.e., Open a Command Prompt (filename: CMD.EXE) and type "netsh int ip reset resetlog.txt" and reboot once more].
    Reinstall Kaspersky Internet Security.
    If that does not work, then you might want to contact Kaspersky's technical support department and see what steps they recommend.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Satellite A660-158 - Can't start Windows

    Toshiba Satellite A660-158
    I bought a laptop Toshiba Satellite A660-158. He served me less than a week. I think it's the broken hard drive.
    My problem:
    Once I start the computer, it booted and worked for a while, but suddenly there was an error reading that I didn't have time. Computer was restarted. And does not load ... Before the boot mode does not reach. But the initial test (with logo) has been successful. Takes a long time and eventually gives an error:
    Unable to start Windows. Maybe it was because of the recent small difference is the hardware configuration or software. To fix this error:
    1. Insert your Windows installation disc and restart your computer (The complete drive was not)
    2. Choose the language settings, and then click Next.
    3. Select "Repair your computer".
    If this disc is missing, contact your system administrator or computer manufacturer (He turned and said to bear the service center, but I do not have this capability).
    Status: 0xc000000e
    Details: Failed to boot menu, since the required device is inaccessible.
    Please help me! Idon't know what me do(
    Please write to E-Mail: [email protected]
    Message was edited by: HunterS7777777

    Hey,
    And why do you think the hard drive is defective?
    Have you already tried the Repair your computer option? Usually with this option you can restore factory settings in few minutes.
    Furthermore if you have the Toshiba recovery disk you can also restore factory settings from this disk. Just boot from it and follow the screen instructions. You have to make few clicks only, the installation with all drivers and tools happen automatically.
    If you have more questions, please let us know! :)

  • I can't access Windows 7 through Bootcamp anymore after upgrading to Lion, please help

    Hi All.
    I just recently upgraded my operarting system to the new OS X Lion. I had Windows 7 running through Bootcamp. Now every time i try and start windows like I used to, the computer restarts but then i get a black screen with text on the top left saying something like "no system disk". What i'm saying is that i cannot get into windows anymore since I upgraded. Anyhelp will be highly appreciated please

    It shows only two options and it recognise my ext dvd-rw then i partition for boot camp partition but after the partition that restarts automatically then blank screen displayed infinitely give me solution

  • Free Transform Rotation Issue - Layer rotates/moves by itself after clicking on it?

    Hey all.  Since the last update, I have been experiencing this weird issue while using Free Transform.  Sometimes, after I invoke Free Transform and then click on the layer I am transforming, it seems to rotate by itself.  Usually clockwise.  It happens really quickly.  It's almost like my mouse cursor is off center when I click on the layer and the it's like the layer rotates to match the location of my cursor.  It's so weird and quite difficult to describe.  I have also experienced the layer moving quickly to the right after clicking on it while in the Free Transform state.  I have tried 2 different mice and experienced the issue on both of them. I have also tried different mousing surfaces and experienced the same thing.  It doesn't happen every time but just sometimes.  It started doing it since the latest update.  It's really annoying.  Just wondering if anyone else has this issue.
    Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x64
    Operating System: Windows NT
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 6
    Logical processor count: 12
    Processor speed: 3500 MHz
    Built-in memory: 16325 MB
    Free memory: 4904 MB
    Memory available to Photoshop: 14659 MB
    Memory used by Photoshop: 63 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTX 690/PCIe/SSE2
    Display: 2
    Display Bounds:=  top: 0, left: 1920, bottom: 1080, right: 3840
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Card Number: 3
    Video Card: NVIDIA GeForce GTX 690
    OpenCL Unavailable
    Driver Version: 9.18.13.2018
    Driver Date: 20130512000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um.dll,nvwgf2um.dll
    Video Mode: 1920 x 1080 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 690
    Video Card Memory: 2048 MB
    Video Rect Texture Size: 16384
    Video Card Number: 2
    Video Card: NVIDIA GeForce GTX 690
    OpenCL Unavailable
    Driver Version: 9.18.13.2018
    Driver Date: 20130512000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um.dll,nvwgf2um.dll
    Video Mode: 1920 x 1080 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 690
    Video Card Memory: 2048 MB
    Video Rect Texture Size: 16384
    Video Card Number: 1
    Video Card: LogMeIn Mirror Driver
    OpenCL Unavailable
    Driver Version: 7.1.542.0
    Driver Date: 20060522000000.000000-000
    Video Card Driver:
    Video Mode:
    Video Card Caption: LogMeIn Mirror Driver
    Video Card Memory: 2048 MB
    Video Rect Texture Size: 16384
    Serial number: 91198134259239288106
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\%%username%name%s\Neo\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      W:\, 931.5G, 694.5G free
      S:\, 232.9G, 110.0G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
       BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Camera Raw 8.1
       Camera Raw Filter 8.1
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Clouds 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Collada 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       Comp%%username%name%ve GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Difference Clouds 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Embed Watermark 4.0
       Extrude 13.0
       FastCore Routines 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Measurement Core 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Mezzotint 13.0
       MMXCore Routines 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Picture Package Filter 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Pinch 13.0
       Pixar 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0.1
       Shear 13.0
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Sumi-e 13.0
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       Underpainting 13.0
       Vanishing Point 13.0
       Variations 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       WIA Support 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins:
       ShineOff [x64] v2.1.5 2.1.5.0
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

    You may have downloaded an app that kick started something that caused the system to go whacko (how's that for a technical explanation) and maybe resetting the system will take care of it.
    Good luck. I hope it solves your issue!

Maybe you are looking for

  • Restoring iPads through Apple Configurator

    We are a library that has 8 iPads that we are trying to set up through Apple Configurator. Everything has been working well so far, but we've been having problems with the check in/out function. The iPad starts the restore process as it's supposed to

  • How to create Bi product production order?

    How to create production order that has same contain but creates two products X and Y. For example when we produce oil,wax got created as bi product. Please suggest how to do that?

  • Problems downloading VISS on more than one computer

    I am having difficulty downloading and installing Verizon Internet Security Suite . We ordered the package that can be installed on up to 3 Home Computers I received email to for the download and I downloaded it on my Primary Computer. Then I read in

  • How Do I Quickly Delete A Message Before The Other...

    I sent a message in a conversation to someone by a mistake ,that message was not for that person,And I want to remove it before this person see's this message? Pronto?

  • Acer AspireRevo + Adobe Flash 10.1 Beta + Hulu/CBS/etc streaming?

    Has anyone tried the Acer AspireRevo with the latest Flash Player 10.1 beta (which adds GPU acceleration support)?  Can it handle Hulu with the latest Flash player beta? I'm assuming it can't handle Hulu using any of the release versions of Flash Pla