Can't start WLS after change of JDK
I changed JDK from 131 to 140 and the server won't even start....pls let me
know what I need to change in the cmd file.
Thanks.
W
It's not supported, but if you want to experiment, you can
read this document: http://www.genuitec.com/products/JDK14_WLS61.pdf
Jay Shen <[email protected]> wrote:
I changed JDK from 131 to 140 and the server won't even start....pls let me
know what I need to change in the cmd file.
Thanks.
W--
Dimitri
Similar Messages
-
Can not start opmn after change OracleAS Metadata Repository Listener Port
Hello,
I installed OracleAS metadata Repository Listener Port, And i change the port of the listener, then flowwoing the manual was needed start teh OID component
But I won´t startRoberto,
The tail of OIDCTL.log is:
09/02/23 19:14:44 Start process
oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
09/02/23 19:58:44 Start process
oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
09/03/02 16:02:43 Start process
09/03/04 15:57:21 Start process
And the tail for oidmon.log:
2009/03/02:16:02:43 * oidmon_u47pacrm01.unitec.mx:0 *
Updating Process Table...
2009/03/04:14:52:11 * Killed process pid = 1345
2009/03/04:14:52:11 * Monitor Process id = 1345 Terminated
2009/03/04:14:52:11 * Sent SIGTERM to process id = 1374
2009/03/04:14:52:11 * ODISRV Instance 1 deleted from registry
2009/03/04:14:52:11 * Updating Process Table...
2009/03/04:14:52:11 * Sent SIGTERM to process id = 1370
2009/03/04:14:52:11 * OIDLDAPD Instance 1 deleted from registry
2009/03/04:14:52:11 * Updating Process Table...
2009/03/04:15:57:21 * Connecting to database, connect string is te04as
2009/03/04:15:57:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:57:23 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:41 * Connecting to database, connect string is te04as
2009/03/04:15:57:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:01 * Connecting to database, connect string is te04as
2009/03/04:15:58:01 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:21 * Connecting to database, connect string is te04as
2009/03/04:15:58:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:41 * Connecting to database, connect string is te04as
2009/03/04:15:58:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:01 * Connecting to database, connect string is te04as
2009/03/04:15:59:01 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:21 * Connecting to database, connect string is te04as
2009/03/04:15:59:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:41 * Connecting to database, connect string is te04as
2009/03/04:15:59:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:01 * Connecting to database, connect string is te04as
2009/03/04:16:00:01 * [gsdsiConnect] ORA-0,
2009/03/04:16:00:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:21 * Connecting to database, connect string is te04as
2009/03/04:16:00:21 * [gsdsiConnect] ORA-0,
2009/03/04:16:00:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:41 * Error connecting database. -1
2009/03/04:16:00:41 * Error : Guardian Process terminated
2009/03/04:16:50:45 * Connecting to database, connect string is te04as
2009/03/04:16:50:45 * [gsdsiConnect] ORA-0,
2009/03/04:16:50:45 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:50:47 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:36 * Connecting to database, connect string is te04as
2009/03/04:17:18:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:18:38 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:56 * Connecting to database, connect string is te04as
2009/03/04:17:18:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:16 * Connecting to database, connect string is te04as
2009/03/04:17:19:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:36 * Connecting to database, connect string is te04as
2009/03/04:17:19:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:56 * Connecting to database, connect string is te04as
2009/03/04:17:19:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:16 * Connecting to database, connect string is te04as
2009/03/04:17:20:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:36 * Connecting to database, connect string is te04as
2009/03/04:17:20:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:56 * Connecting to database, connect string is te04as
2009/03/04:17:20:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:16 * Connecting to database, connect string is te04as
2009/03/04:17:21:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:21:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:36 * Connecting to database, connect string is te04as
2009/03/04:17:21:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:21:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:56 * Error connecting database. -1
2009/03/04:17:21:56 * Error : Guardian Process terminated
----- -
We changed PORTAL password by going top sqlplus and OAS. Thinking it will make changes at both places. Now we see that when we start OAS. OC4J_BI_FORM does not start???
I provided an answer in the Portal Security forum:
Can not start OC4J_BI_FORM after PORTAL user password change -
Can't start Tomcat after installing Bea WorkShop for JSP
Hi,
I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.I installed BEA Workshop for JSP Version: 3.1.0
Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
Thanks for your assistance.
Ron -
Can't Start Portal After Install
After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the same message.
What password should I use to start the server?I've followed the directions and am experiencing the exact same problem. Brand
new installation of Weblogic server 6.1 SP2 with examples. That install is working.
Then added Portal 4.0 SP1, updated the license file and I have the same issue
with the Illegal access exception resulting in the "Fatal initialization exception"....
Hmm!
[email protected] (Bowrat) wrote:
Below listed are the common errors you run into during installation
process:
- You need to have the correct version numbers of both the weblogic
server and the portal server. For instance the portal server 4.0 (eval
copy) will only run on WebLogic 6.1 SP1. So check the edocs for
supported platforms
- Make sure you have the installed the full version of the weblogic
server (including examples)
- Finally, you need to run the UpdateLicense.cmd file to update the
license.bea under ur Bea Root
Give it a shot after u have checked all of the above three - goodluck
- Bowrat
www.Bowstreet.com
Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
From: Steve Anderson <[email protected]>
Newsgroups: weblogic.support.install
Subject: Can't Start Portal After Install
References:
NNTP-Posting-Host: 209.11.114.150
X-Original-NNTP-Posting-Host: 209.11.114.150
Message-ID: <[email protected]>
Date: 13 Feb 2002 20:25:53 -0800
X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
Organization: BEA SYSTEMS Inc
Lines: 18
XPident: firewall-user
Path: newsgroups.bea.com!209.11.114.150
Xref: newsgroups.bea.com weblogic.support.install:9600
After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the samemessage.
What password should I use to start the server? -
[SOLVED] Can't Start MySQL after upgrading to 5.1.41-3
I can't start mysqld with 'mysqld start'.Here is my mysqld output:
[ahao@sky ~]$ mysqld start
091125 18:33:48 [Note] Plugin 'FEDERATED' is disabled.
091125 18:33:48 [Note] Plugin 'ndbcluster' is disabled.
091125 18:33:48 InnoDB: Started; log sequence number 0 44233
mysqld: Too many arguments (first extra is 'start').
Use --verbose --help to get a list of available options
091125 18:33:48 [ERROR] Aborting
091125 18:33:48 InnoDB: Starting shutdown...
091125 18:33:49 InnoDB: Shutdown completed; log sequence number 0 44233
091125 18:33:49 [Note] mysqld: Shutdown complete
This is my /var/lib/ complete with permission settings:
[ahao@sky ~]$ cd /var/lib ; ls -al
total 84
drwxr-xr-x 20 root root 4096 2009-11-25 18:08 .
drwxr-xr-x 13 root root 4096 2009-11-25 13:51 ..
drwxrwx--- 2 root policykit 4096 2009-05-10 09:10 PolicyKit
drwxr-xr-x 2 policykit root 4096 2009-05-10 09:10 PolicyKit-public
drwxr-xr-x 3 root root 4096 2009-09-19 12:19 bluetooth
drwxr-xr-x 2 root root 4096 2009-09-16 22:09 dbus
drwxr-xr-x 2 root root 4096 2009-11-23 17:38 dhcpcd
drwxrwxrwt 2 root root 4096 2009-07-19 18:17 ex
drwxr-xr-x 2 root root 4096 2009-09-16 22:38 hwclock
drwxr-x--- 2 root locate 4096 2009-10-22 06:55 locate
-rw-r--r-- 1 root root 462 2009-09-20 00:02 logrotate.status
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 misc
drwxr-x--- 2 root locate 4096 2009-11-25 18:09 mlocate
drwxrwxrwx 4 mysql mysql 4096 2009-11-25 18:33 mysql
drwxr-xr-x 6 root root 4096 2009-09-07 08:54 nfs
drwxr-xr-x 4 root root 4096 2009-11-25 18:08 pacman
drwx------ 3 root root 4096 2009-11-21 03:30 polkit-1
drwxr-xr-x 2 root root 4096 2008-09-06 14:33 rarian
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 syslog-ng
drwxr-xr-x 3 root root 4096 2009-10-19 20:10 wicd
drwxr-xr-x 2 root root 4096 2009-11-21 02:35 xkb
/etc/mysql/my.cnf is out-of-the-box
What seems to be the problem here? Please shed some light...thank you
Last edited by akiglobal (2009-11-26 07:41:00)How silly of me.....first of all...I entered 'mysqld start', I should have just entered 'mysqld', second of all, I didn't change the file permission on /var/run/mysqld. I change /var/run/mysqld file permission into 'chmod 777 /var/run/mysqld -R', after that mysql works!
-
Blue Screen at Start up after changed HD Preferences-Need to back up files!
So here’s what happened,
A few days ago I mistakenly took my HD Drive and changed the permissions on it. Since then, when I start up I first see the apple logo (with chime) followed by a blue screen with a flashing wheel (loading). I have called tech support over the phone and I was told that I should use my mac OS X CD to erase and install to just wipe everything out. Which is fine with me, however, I do not have a back up and would like to be able to keep my files.
I was then told that I would be able to “migrate” my files to a working macbook, then to go ahead and erase the system and put them back in. The problem is that I tried doing the whole migration process but it didn’t work because I could not login to my mac to initiate the process. I also then tried to look at my files from the network, but that is also blocked and does not show up on the other macbook’s available networks.
My question is, what can I do to extract my files from my macbook so I can add them in after I’ve reinstalled my system? Help!"A1. If the disk in question is your Mac OS X startup disk and your computer stops starting up at the blue screen, restart with the Command and S keys held down, and enter the following commands:
mount -uw /
chown root /
chmod 1775 /
exit
I tried putting in the commands but was not able to exit properly.
After the chmod 1775 /
it asked if I wanted to see a list...
Did nothing for me. Any other suggestions? -
Can Not start Database after Server is restarted !!!!
I am building a oracle Hyperion Essbase and planning sandbox on my laptop using VMware 9.0
and 11gr2 as ny database.
Once I complete the install and config, I am installing the essbase EAS client, once that is completed I have too restart the server
once the Server is back up, the database is giving me the following Error:
Database Instance: Hyperion
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed Aug 31, 2013 2:19:45 AM EDT
Database Instance
Host localhost
Port 1521
SID Hyperion
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Listener
Status Down
Host localhost
Port 1521
Name LISTENER
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Location C:\app\Administrator\product\11.2.0\dbhome_1\network\admin
Details TNS-12541: TNS:no listener
Agent Connection to Instance
Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach
Change Status Details
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
Disconnected
Database Instance: Hyperion
Error Message
The operation for starting up the database has failed. Click 'View Details' to see the error. You may have to perform a recovery.
View Details
Perform Recovery
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed Aug 31, 2013 6:56:37 AM EDT
Please adviseNot clear what you are asking instruction i am following
again I need a Database schema for Oracle Hyperion Shared Services
I set up the database and config the Hyperion Essbase application
but when I restart the server the database gives me the above error
Listener / Status Down / Host localhost
and
Agent Connection to Instance Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach
I manually went into the database instance and started the Listener
but I can not start the database
it is saying me to do a recovery ????
Details
SQL> Connected to an idle instance.
SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
Disconnected
Database Instance: Hyperion
Error Message
The operation for starting up the database has failed. Click 'View Details' to see the error. You may have to perform a recovery.
View Details
Perform Recovery
what can I do Please advise -
Can't start up after disconnect ethernet network of 2 macs
I tried conecting 2 macs via ethernet. Personal file sharing was turned on with both. Printer sharing seemed not to work, so that was disabled on both. Ethernet cable from systems to router connected to cable modem. Seemed to work well for my purpose -- access to second drive on old 733 G4.
Before I disconnected the ethernet cable, I turned off file sharing on both machines. They seemed to run fine after disconnect. Then turned off the G4.
I left the iMac running with some software active for one day while away from home. Returned to see blank screen. Moved trackball to wake from what I thought was display sleep but nothing happened.
Install disk (10.4.4) will start up machine, but cannot install to the internal drive since it is not seen. Disk Utility shows drive, but no volume to repair disk.
My question: Can I start up my iMac in a way to bypass looking for a network startup and see the internal drive?
20" iMac Core Duo 2.0 Ghz Mac OS X (10.4.6)"Target Mode will only work with ATA disks"
No, that is not correct, also works with SATA, which is in all Intel Macs. However, I think I recall that both computers need to be updated to the same Mac OS X version, such as 10.4.6
Apple article Startup key combinations for Intel-based Macs
Apple article with example of Firewire Target Disk usage with Intel Macs
Back to attempting normal startup:
hold down the "option" key instead of the x key above, and hold until the disk option you want to select appears. From my experience, the iMac Intel will show the startup disc choices quickly, within less than a minute under normal conditions, much quicker than the G5's. -
Can't start RoboHelp5 after I used trial of RH6
I installed the trial version of RH6 on my computer. (Before
doing so, I made backups of my project, in case of non
compatibility with RH5). After the trial period I decided not to
buy it yet and uninstalled RH6, because I couldn't find important
differences (at least not concerning the functions I'm using) and
because the font problem (conversion from Arial to Times, even with
the Adobe patch and after uninstalling alle security updates for
Office) was the same with RH6.
Now I can't start my projects at all. When I try to start the
RH Explorer I get a message, that the registry AppPath can't be
read. I uninstalled both: Office and RH completely, reinstalled
Office 2003, then RoboHelp, but the same problem is appearing.
Even the projects I saved as backup and that I never opened
in RH6 don't work any more.
Any idea what I can do? (can there be hidden elements of RH6
which are not deleted automatically, when uninstalling with the
Software menu in my control panel?)On my site there is a topic about installing and
uninstalling. In it there is reference to an Adobe topic covering a
full uninstall which does require some registry editing. That was
written for X5 but I think it will cover RH6. I cannot guarantee
that though.
Make sure you create a System Restore point before you start
playing with the registry and only do that if you feel confident.
If not, enlist some help from IT or a developer. -
Can't start apache after linking mod_wl_20.so in the https.conf
I get a segementation fault when trying to start apache after i have linked the apache plug-in.
Anyone ever run into this?
I fails whether the <IfModule> statement is there or not.Appreciate your response. This is all I have done.
Installed IHS 2.0.47, copied mod_wl_20.so file to modules directory and made one entry in httpd.conf:
LoadModule weblogic_module modules/mod_wl_20.so
IHS core dumps on when tried to startup. This is all that is documented in the "Using Web Server Plug-Ins with WebLogic Server" document. Please let me know if I am missing any additional information. Thanks! i would appreciate if you can email me your httpd.conf file for my reference. Thanks!
[email protected] or [email protected]
Suresh, -
Can't start UCSM after java upgrade
Hi
After I have been recommended to upgrade to newest java, I can't start UCS Manager anymore.
I try from a Windows 7 64 Bits computer and a Windows 8 64 Bits computer.
Same error.
As you see, I have java 1.7.0_07. It is higher than the reguirement.
UCSM version is 2.0(2q)
Because there is some security issues with earlier java versions, I don't want to downgrade.
Do anyone have any solution on this problem?
I have uninstalled every version of Java, and just installed the newest, but it didn't help
Thanks for any help.Hi Sting,
For you to use 1.7 you need to have UCSM version 2.0.3a and above.
http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/OL_25363.html
(check the system requirement section).
At this point, the only option for you is to downgrade back to a 1.6 version.
./Abhinav -
Can't start up after power failure.
Greetings.
Here in the Santa Cruz mountains we experience occasional power outages. After an outage, when I attempt to re-start the computer, it doesn't get past the spinning spokes (or whatever you call that thing). The thing just keeps spinning until I press the power button, shut the computer off, and re-start. After one or two tries, it starts up, but I'd like to know how to prevent the problem in the first place.
G4 Dual 450 Mac OS X (10.3.9) 1 GB RAMThe first thing you should do after an abnormal shutdown is boot from your OS X Installer Disc and use Disk Utility to repair both the hard drive and permissions.
There are two ways to prevent a problem like this:
1. Buy an external Firewire drive and backup software. Maintain a bootable backup of your system on the external drive. Update incrementally on a regular schedule - Daily for your work files; weekly for the entire system.
2. Buy an Uninterruptible Power Supply (UPS) with sufficient capacity to keep your system running long enough for you to shutdown normally until power is restored. Usually this means a UPS with enough capacity for about 10 minutes of operating time on battery. Of course you can buy as much capacity as you are willing to spend money for if you want longer operating times during blackouts. -
IPhoto 11 slideshow music: Can I start music after 1st slide?
Can I start the music at the second slide in IPHOTO 11 slideshow?
No. However, you can add a track of dead air (silence) of a few seconds and use that track with the other track in a custom playlist. You may have to experiment with the length depending on the length of the sideshow if you use Scale to Music. If you set a definite slide display time create the dead air track to that length.
You can use a 3rd party audio editor or Garageband to create the dead air track.
OT -
Help -can't start up after uupgrade and 'internet cleanup' install
I've got a problem... trying to remember how my installs went, but recently installed 10.5.4 and shortly thereafter a smith micro product called internet cleanup. in addition, during the restart, the air conditioner for our upstairs (computer / exercise room died and at 85F or so, returned to find the fans running full blast and the international "NO" sign in place of the gray apple at startup.
I am unable to start up at this point and don't know why. I have run disk utility and repaired 1 permission, no joy, and ran disk warrior last night and still can't start up. OS cd and DW see my drive ok and perform tests and repairs ok, but still can't start up.
if anyone has a recommendation, I'm all ears. I'm ready to start unplugging any peripherals, open the case, and unplug memory, not knowing what else to do.
thanks in advance,
macles,
les owens
bath, ncGet a UPS 1500VA for your Mac Pro.
I would be surprised Smith is 10.5.x compatible, why not look at Onyx or Leopard Cache Cleaner, or just manually clean out ~/Library/Caches/
Resetting the SMC (button for pre-2008, leaving unplugged for 2008 model).
http://www.apple.com/support/macpro/
Obviously first, if DW repairs your drive and you are running 10.5.4, you have another disk drive and can boot, no?
Backups and cloned system?
Else, start installing and setting up a new OS boot drive. Later you can try to merge or migrate and salvage files and applications.
Note some of the comments on this Internet Cleanup 5.0
http://www.versiontracker.com/dyn/moreinfo/macosx/19900
Maybe you are looking for
-
Confused about transaction, checkpoint, normal recovery.
After reading the documentation pdf, I start getting confused about it's description. Rephrased from the paragraph on the transaction pdf: "When database records are created, modified, or deleted, the modifications are represented in the BTree's leaf
-
Hi All, I have searched high and low through Google for an answer to the following problem - but to no avail. Basically i am importing a PSD banner design into Flash CS4 professional. I've used the import to stage option and have selected place layer
-
MTA Message Tracking - status PENDING
Hi All Any idea why MTA Message Tracking will say Status PENDING for all messages, but when you look from the client, it says Delivered/Opened etc.? This is happening on all messages to all post offices etc. Thanks Emily
-
What's "\u" meaning in a string literal ?
hi , I met a code like this : String cstr = "\u932f\u8aa4"; Would somebody Pls tell me what's the \u meaning ? Thanks Samuel
-
Adjustment layer bug - or is it just me?
Somebody please try this and tell me if it's a bug or just me ... Create an adjustment layer over some video -- any video. Add 2 effects to the Adj Layer: Fast Blur and Levels. Set blurriness to 50. Set RGB White Input Level to 50. Now you should see