Can't start x, parsing error
I execute the startx (or xinit) command as non-root user but something's wrong.
Here's /var/log/Xorg.0.log and /etc/X11/xorg.conf
Parse error on line 7 of section InputDevice in file /etc/X11/xorg.conf
This section must have an Identifier line.
(EE) Problem parsing the config file
(EE) Error parsing the config file
Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "InputDevice"
Option "XkbLayout" "us"
Option "XkbVariant" "Classic Dvorak"
EndSection
(I have a Swedish keyboard but would like to use the us(dvorak-classic) layout.)
Please tell me what to do and Thanks in advance.
With an error like "This section must have an Identifier line." it seems like you need a line
Identifier "foobar"
or something like that.
Try something like this:
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Section "InputDevice"
Identifier "Yourkeyboard identifier"
Option "XkbLayout" "us"
Option "XkbVariant" "Classic Dvorak"
EndSection
With your keyboard identifier from
Section "InputDevice"
Identifier "Keyboard0"
Last edited by Cdh (2009-10-25 10:45:09)
Similar Messages
-
I can't start Muse (Enexpected error I-200)
I can't start Muse (Enexpected error I-200). It asks me to log in, then I get this.
I changed passwords, but that didn't help. Other apps work fine.
I *really* need to use Muse today so I'm kind of stressing out about it.
Adobe's overly obfuscated "support" system isn't helping one jot.http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html
-
I am running CentOS 4.5 64-bit with kernel 2.6.9-55.EL on 2 AMD64 single CPU machines. Installed Oracle Clusterware 10.2.0.1 on both of these (pushing from node1). Then created RAC database using ASM. Everything worked fine & CRS/RAC were up (on both) for sometime. Then I stopped the resources & CRS/RAC. But, after sometime I can't start CRS on any of these! Getting error message (in /tmp/crsctl.pid):
OCR initialization failed accessing OCR device: PROC-26: Error while accessing the physical storage.
But I can see the FireWire drive/RAW partitions using "fdisk -l" and the permission/ownership are correct on the OCR/Voting Disk RAW partitions.
I also don't see any socket opened under /var/tmp/.oracle!
The is no other message in any other error/log file.
What is this & how to solve?
Thanks.Hi,
Pls refer to the following solution:
1. Please check the rights and owners of the ocr devices
2. Check if the ocrconfig_loc is pointing to the correct ocr in /var/opt/oracle/ocr.loc.
The ocrconfig_loc parameter specifies the location of the Oracle Cluster
Registry (OCR) used by the CSS daemon. The path up to the cdata directory is the Oracle home directory where the CSS daemon is running.
3. Reconfiguring Oracle Cluster Synchronization Services
a. $/u01/app/oracle/product/10G/bin/localconfig delete
Unexpected parameter: css
$
b - I killed init.cssd process
$ps -ef |grep css
root 1559 1 0.1 09:34:53 ?? 0:07.52 /sbin/init.d/init.cssd startcheck
root 16390 16070 0.0 12:33:53 pts/1 0:00.01 grep css
$kill -9 1559
$ps -ef |grep css
root 16407 16070 0.0 12:34:15 pts/1 0:00.01 grep css
c - Set up ORACLE_HOME
$export ORACLE_HOME=/u01/app/oracle/product/10G
$/u01/app/oracle/product/10G/bin/localconfig delete
Enter the following command to reconfigure the CSS daemon to run from this Oracle home:
# $ORACLE_HOME/bin/localconfig reset $ORACLE_HOME
The script stops the Oracle CSS daemon, reconfigures it in the new Oracle home, and then restarts it. When the system boots, the CSS daemon starts automatically from the new Oracle home.
Terry liu -
How can I solve a Parse Error: "There was a problem parsing this package"
Hello;
I developed a really simple app in Flash Pro CC for android. I published it using AIR 13.0 for Android. When I tried to install it I received the Parse Error: "There was a problem parsing this package"
Im not sure if the problem has something to do with my app xml file, but here it is:
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://ns.adobe.com/air/application/13.0">
<id>TOeatorNOTTOeat</id>
<versionNumber>1.0.0</versionNumber>
<versionLabel>TouchEvent</versionLabel>
<filename>TO eat or NOT TO eat</filename>
<description/>
<name>TO eat or NOT TO eat</name>
<copyright/>
<initialWindow>
<content>TO%20eat%20or%20NOT%20TO%20eat.swf</content>
<systemChrome>standard</systemChrome>
<transparent>false</transparent>
<visible>true</visible>
<fullScreen>true</fullScreen>
<aspectRatio>landscape</aspectRatio>
<renderMode>gpu</renderMode>
<autoOrients>false</autoOrients>
</initialWindow>
<icon>
<image36x36>icons/icon36x36.png</image36x36>
<image48x48>icons/icon48x48.png</image48x48>
<image72x72>icons/icon72x72.png</image72x72>
<image96x96>icons/icon96x96.png</image96x96>
</icon>
<customUpdateUI>false</customUpdateUI>
<allowBrowserInvocation>false</allowBrowserInvocation>
<android>
<manifestAdditions>
<![CDATA[<manifest> </manifest>]]>
</manifestAdditions>
</android>
<supportedLanguages>en</supportedLanguages>
</application>
What do you think is the best to check?i don't see any problem with your manifest.
try saving your fla and the published files to a new directory and see if the error resolves. -
Can't Start J2EE Engine Error: Cannot attach to the Messenger
Hi ALL,
I can't make the java start.
follow the logs
jcontrol.log
[Thr 01] INFO: Invalid property value [Debbugable=yes]
[Thr 01] [Node: SDM] java home is set by profile parameter
#Java Home: /usr/java14_64
[Thr 01] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/BWH/SYS/exe/run/jvmx.jar
JStartupIReadSection: read node properties [sdm]
-> node name : SDM
-> node type : sdm
-> node execute : yes
-> java path : /usr/java14_64
-> java parameters :
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 256M
-> root path : /usr/sap/BWH/DVEBMGS23/SDM/program
-> class path : /usr/sap/BWH/DVEBMGS23/SDM/program/bin/SDM.jar
-> OS libs path : /usr/sap/BWH/DVEBMGS23/j2ee/os_libs
-> main class : SDMInternal
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BWH/SYS/exe/run/jstartup.jar:/usr/sap/BWH/SYS/exe/run/jvmx.jar
-> shutdown class : com.sap.sdm.jstartup.shutdown.InternalShutDown
-> parameters : server sdmhome=/usr/sap/BWH/DVEBMGS23/SDM/program
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 01] ***LOG Q0I=> NiPConnect2: connect (79: Connection refused) [nixxi.cpp 2770]
[Thr 01] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 12
(SI_ECONN_REFUSE/79; I4; ST; 10.196.203.96:3953) [nixxi.cpp 2770]
[Thr 01] *** ERROR => MsIAttachEx: NiBufConnect to mz4e/3953 failed (rc=NIECONN_REFUSED) [msxxi_mt.c 652]
[Thr 01] *** WARNING => Can't attach to message server (mz4e/3953) [rc = -100]-> reconnect [jcntrms_mt.c 368]
[Thr 01] Thu Jan 17 14:48:48 2008
[Thr 01] ***LOG Q0I=> NiPConnect2: connect (79: Connection refused) [nixxi.cpp 2770]
[Thr 01] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 12
(SI_ECONN_REFUSE/79; I4; ST; 10.196.203.96:3953) [nixxi.cpp 2770]
[Thr 01] *** ERROR => MsIAttachEx: NiBufConnect to mz4e/3953 failed (rc=NIECONN_REFUSED) [msxxi_mt.c 652]
[Thr 01] *** WARNING => Can't attach to message server (mz4e/3953) [rc = -100]-> reconnect [jcntrms_mt.c 368]
[Thr 01] Thu Jan 17 14:48:53 2008
[Thr 01] ***LOG Q0I=> NiPConnect2: connect (79: Connection refused) [nixxi.cpp 2770]
[Thr 01] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 12
(SI_ECONN_REFUSE/79; I4; ST; 10.196.203.96:3953) [nixxi.cpp 2770]
[Thr 01] *** ERROR => MsIAttachEx: NiBufConnect to mz4e/3953 failed (rc=NIECONN_REFUSED) [msxxi_mt.c 652]
[Thr 01] *** WARNING => Can't attach to message server (mz4e/3953) [rc = -100]-> reconnect [jcntrms_mt.c 368]
[Thr 01] Thu Jan 17 14:48:58 2008
disp
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jan 17 14:48:27 2008
J2EE server info
start = TRUE
state = STARTED
pid = 901340
argv[0] = /usr/sap/BWH/SYS/exe/run/jcontrol
argv[1] = jcontrol
argv[2] = pf=/usr/sap/BWH/SYS/profile/BWH_DVEBMGS23_calsaps011
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64980
argv[5] = -DSAPSYSTEM=23
argv[6] = -DSAPSYSTEMNAME=BWH
argv[7] = -DSAPMYNAME=calsaps011_BWH_23
argv[8] = -DSAPPROFILE=/usr/sap/BWH/SYS/profile/BWH_DVEBMGS23_calsaps011
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jan 17 14:49:48 2008
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=901340)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jan 17 14:50:07 2008
DpEnvCheckJ2ee: switch off j2ee start flag
I have the DEV enviroment working but this QAS doesn't.
Could someone help me?
Regards,
NiviaHi Nivia
Check for Java schema user (Default SAPSR3DB) in dba_users table if the account is open or not? It should be open.
If yes check the JAVA users "J2EE_ADMIN", "J2EE_GUEST" and "SAPJSF" in usr02. They should be open.
Try it again and if again fail thry to send the current Java log.
Best Wishes.
Kumar -
Can't start Mini SAP: error "MSG_SERVER died"
Hello!
I have succesfully installed Mini SAP version 4.6D. When I try to start it, I get error messages "MSG_SERVER died" and later "DISPATCHER died". I can't figure out what could be wrong. Please help!
Below is a detailed command-prompt and SLOG00 file content. Although the content of the SLOG00 file is to me completely unreadable, maybe it means something to someone. Or, is there any log viewer for this?
Thanks in advance for all inputs!
Kind regards,
Igor Barbaric
COMMAND-PROMPT ECHO:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
C:\MBS>runmbs
C:\MBS>set DBMS_TYPE=mss
C:\MBS>set DIR_LIBRARY=.
C:\MBS>set MSSQL_DBNAME=MBS
C:\MBS>rem del pxastat
C:\MBS>start /B msg_server.exe pf=MBS_D00.pfl
C:\MBS>disp+work.exe break pf=MBS_D00.pfl
dp Ctrl-C enabled
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
MSG_SERVER died => main: MsSInit
Thu Feb 10 13:37:23 2005
SemSpinning: 2200 usec for 27339 loops -> 12 loops per usec
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
DISPATCHER died => DpSapEnvInit: DpCommInit
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
SLOG00 content:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
aE002005021013372300 2140 0MS 0 046D 20.1-- 180--
iE102005021013372300 2140 0MS 0SCSA 4096 mQ012005021013372300 2140 0MS 0Msg Server 1 2140 MsSInitMSStartmsxxserv1212mQ0I2005021013372300 2140 0MS 0 getservbyname 0 NiPServgetservninti.c 0457mQ0A2005021013372300 2140 0MS 0 sapmsMBS NiIServNiPServnixxi_r.2303mQ022005021013372300 2140 0MS 0Msg Server 2140 MsSHaltMSStop msxxserv3931iE102005021013372400 2112 0DP 0SCSA 4096 mQ002005021013372400 2112 0DP 000 2112 DpSapEnDPStartdpxxdisp0863mQ0I2005021013372400 2112 0DP 0 WSASocket10091 NiPSockWSASockninti.c 1174mQ052005021013372400 2112 0DP 0 2112 DpHalt DPStop dpxxdisp6216
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<Achim!
Thanks for a hint!
This is far more readable. I can see some error messages, but still don't know what to do. What might "network subsystem" mean?
Anyway, here's what the files say.
Kind regards,
Igor
DEV_MS:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
trc file: "dev_ms", trc level: 1, release: "46D"
Thu Feb 10 13:37:23 2005
***LOG Q0I=> NiPSocket: WSASocket (10091: WSASYSNOTREADY: Network subsystem is unavailable) [ninti.c 1174]
ERROR => NiILocalCheck: NiPSocket (rc=-1) [nixxi_r. 1758]
***LOG Q0I=> NiPSocket: WSASocket (10091: WSASYSNOTREADY: Network subsystem is unavailable) [ninti.c 1174]
ERROR => NiILocalCheck: NiPSocket (rc=-1) [nixxi_r. 1758]
relno 4640
patchlevel 0
patchno 194
intno 0
pid 2140
***LOG Q01=> MsSInit, MSStart (Msg Server 1 2140) [msxxserv 1212]
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 457]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsMBS) [nixxi_r. 2303]
ERROR => MsCommInit: NiListen(sapmsMBS) (rc=NIESERV_UNKNOWN) [msxxserv 6800]
ERROR => MsSInit: MsSCommInit [msxxserv 1254]
ERROR => main: MsSInit [msxxserv 3892]
***LOG Q02=> MsSHalt, MSStop (Msg Server 2140) [msxxserv 3931]
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DEV_DISP:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
trc file: "dev_disp", trc level: 1, release: "46D"
Thu Feb 10 13:37:24 2005
relno 4640
patchlevel 0
patchno 242
intno 0
pid 2112
***LOG Q00=> DpSapEnvInit, DPStart (00 2112) [dpxxdisp 0863]
MtxInit: -2 0 0
MBUF state OFF
MBUF opmode USE
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 64 MB
<ES> 63 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiPSocket: WSASocket (10091: WSASYSNOTREADY: Network subsystem is unavailable) [ninti.c 1174]
ERROR => NiIListen: NiPSocket (rc=-1) [nixxi.c 0488]
ERROR => DpCommInit:: NiBufListen (rc=-1) [dpxxdisp 5707]
ERROR => DpSapEnvInit: DpCommInit [dpxxdisp 11011]
***LOG Q05=> DpHalt, DPStop ( 2112) [dpxxdisp 6216]
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<,,, -
Can't start server -- Fatal error: Cannot connect to user group ldap server
After installing iCS 2.1, iCS 2.1p1, and iCS 2.1p3, a user will receive the
following error message when trying to start the server:
<P>
Fatal error: Cannot connect to user group ldap server.
<P>
In addition, the Directory Server access logs will contain the following
entry:
<P>
-0400] conn=125 op=1 SRCH base="dc=ldgw-llc,dc=com" scope=2
filter="(objectclass=People)"
In the server.conf file,
check the local.enduseradmindn
parameter. The parameter
should appear as follows:
<P>
uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot
<P>
If the parameter contains
"calmaster" or any user
other than "admin,"
change it to match the line above.Hi,
I am getting the same error, kindly let me know how did you solved this problem
Thanks
Ahmad -
I can´t start photoshop cs4 error: Photoshop CS4 stopped working.
Hay,
My computer is a new computer that I bought 12/26/2008
PC CONFIGS: 3GBs RAM DDR3, Core i7 920, Radeon HD4870, Windows Vista Ultimate x64, 1 TB of HD 600 GB free
, and when i try to run the Adobe Photoshop CS4 32bits it says to me that it stopped working so it show me this problem:
Assinatura do problem:
Nome do Evento de Problema: APPCRASH
Nome do Aplicativo: Photoshop.exe
Versão do Aplicativo: 11.0.0.0
Carimbo de Data/Hora do Aplicativo: 48d3882e
Nome do Módulo de Falhas: StackHash_fd00
Versão do Módulo de Falhas: 0.0.0.0
Carimbo de Data/Hora do Módulo de Falhas: 00000000
Código de Exceção: c0000005
Deslocamento de Exceção: 00000000
Versão do sistema operacional: 6.0.6001.2.1.0.256.1
Identificação da Localidade: 1046
Informações Adicionais 1: fd00
Informações Adicionais 2: ea6f5fe8924aaa756324d57f87834160
Informações Adicionais 3: fd00
Informações Adicionais 4: ea6f5fe8924aaa756324d57f87834160
Leia nossa declaração de privacidade:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0416
Im brazilian and the it is in portuguese.
additional: (im using the trial version, 30 days for use)Hi All
Am having the same problem with (Roft) with the same computer specs.
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.0.0
Application Timestamp: 48d3882e
Fault Module Name: StackHash_f4b6
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 00000000
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 1033
Additional Information 1: f4b6
Additional Information 2: 9227a0f2bedc12733cd08560b33a6046
Additional Information 3: 271e
Additional Information 4: f9344aa6e003b5e529741a1c1f77ed75
Extra information about the problemBucket ID: 971725909
My account is an admin account but this the error occured.
Checked and all the drivers and all seems to be fine.
Please help!!!
Thank you, -
Can't start Daemon Manager service on CSM 3.1
Hello dear experts!
After i've installed CSM 3.1 on customer server i found that CSM Daemon Manager service can't start. Next error log appears in MS Event Viewer:
"Faulting application dmgtd.exe, version 1.0.0.1, faulting module dmgtd.exe, version 1.0.0.1, fault address 0x00011f96."
After these i tried to start this service manually, but i got next error:
"Error 1053: The service did not respond to the start or control request in a timely fashion"
I did software installation remotely using Microsoft Terminal connection to server.
I have exactly the same problem with Cisco LMS 2.6 which i've installed on another server. Daemon Manager can't start there too.
Could you give me advices what i need to do?I tried to reboot server and wait for Windows to load services much times, but it did not help my any way. I found error reason: Daemon Manager couldn't start because there was no swap space on my server. I checked syslog file and found the alert. After i tuned swap settings this service started. But there is one interesting fact during CSM and LMS installation: though swap space setting on my server was as "No paging file", but CSM (LMS) installer shows me that i have sufficient swap space. So always check log files (C:\Program Files\CSCOpx\log) if you can't start your CSM or LMS.
-
8.1.7 management server can't start
I tried to delete a DB service with oradim (W2K SP4, Oracle 8.1.7.0.0). Since then the management server can not start, with Windows error message Error 1075: The dependency service does not exist or has been marked for deletion. In services/properties/dependencies there are no dependency services anymore. Thanks for help.
Can you explain better what do you want to do ? please my friend
[email protected]
Joel P�rez -
MDX Parser Error in Data Mining
Hello Colleagues,
I have created the Application Process Designer(APD) for ABC analysis. Here APD is saved and activated successfully. Now while executing, it fills the data to datatarget, but giving error "Error occurred in starting the PARSER.Error opening in RFC connection. Syntax error in MDX statement".
In help, it says go to SM59 and test the connection of MDX parser. Now there testing is failing, but What I need to do to correct the connection?
RegardsHello,
please read the OSS note: 149809
Hope this helps
Michael -
Hello,
While checking the MDX Parser connection in TR SM59, I get the following error...
Error occurred when starting the parser: Error opening an RFC connection.
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System response
Error opening an RFC connection.
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
===================================
The same TCP/IP connection (with similar properties in working in other BW system). But giving error in the system where I am trying to write some MDX statement (TR MDXTEST). It goes to debug mode as soon as MDX statement is executed in MDXTEST.
Regards
PankajYour RFCDestination is not correct. Please check it in SM59.
The program specified there may not be on the app server. Have you verified this already?
cheers, -
Anyone out there know how i can fix the xml parsing error on football manager 2011? It's wrecking my excellent 4th season and even a delete and reinstall with new game hasn't worked
Have you tried Windows Update in the Control Panel?
Many times it will find the newest supported drivers for Hardware.
Just be sure to install everything not just the Important ones.
Let us know if this helps. -
I installed Oracle9.0.2 on debain 3.0_r1 and selected software only option to install.
After installation finished, I try to start OEM, but it failed and also can not start dbca.
Error messages as following:
oracle@debian:~/product/9.2.0/bin$ ./oemapp console&
[1] 13128
oracle@debian:~/product/9.2.0/bin$ SIGSEGV 11* segmentation violation
stackbase=BFFFEC2C, stackpointer=BFFFD1E4
Full thread dump:
"SIGQUIT handler" (TID:0x4219a2a0, sys_thread_t:0x83127e8, state:R, thread_t: t@2051, sp:0x0 threadID:0x3359, stack_base:0xbf5ffaa0, stack_size:0x200000) prio=1075652256
"Finalizer thread" (TID:0x4219a088, sys_thread_t:0x83126c0, state:CW, thread_t: t@1026, sp:0x0 threadID:0x3358, stack_base:0xbf7ffaa0, stack_size:0x200000) prio=1075652256
"main" (TID:0x4219a0b0, sys_thread_t:0x830c338, state:R, thread_t: t@1024, sp:0x0 threadID:0x3348, stack_base:0xbfffec2c, stack_size:0x200000) prio=1075652256 current thread
java.lang.System.initializeSystemClass(System.java)
Monitor Cache Dump:
Registered Monitor Dump:
Thread queue lock: <unowned>
Name and type hash table lock: <unowned>
String intern lock: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class loading lock: <unowned>
Java stack lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Has finalization queue lock: <unowned>
Finalize me queue lock: <unowned>
Waiting to be notified:
"Finalizer thread" (0x83126c0)
Monitor registry: owner "main" (0x830c338, 1 entry)
[1]+ Aborted ./oemapp console
oracle@debian:~/product/9.2.0/bin$Thanks for the reply, I tried that but it just gives
me:
Oracle Enterprise Manager 10g Database Control
Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All
rights reserved.
Agent is running. Stop the agent and rerun the
command.
But the agent is definitely not running.i.e Stop the agent and rerun rodneyli's command you tried above. -
I have install flash builder 4 beta 2 + blazeds 4.00.7548. While try to connect to data service and face a problem.
When i use a beta 1 that no such probem. please help.
ERROR: XML parse error: Error on line 1 of document: cvc-elt.1: Can not find the declaration of element ‘model’. Nested exception: Can not find the declaration of element ‘model’.Hello All!
I'm just getting started with Flash Builder 4 and BlazeDS and I'm having this same issue. I have installed the FlashBuilder 4 beta 2 Build 253292, and Blaze 4 ( blazeds-turnkey-4.0.0.14341 ). I have also installed the livecycle_dataservices3_modelerplugin_100509. Upon clicking Data-Connect to data/service and then Blazeds, I can see my DAO object listed. However, if I select it I receive the dreaded error. Now if I code in the remote object manually, in the .mxml file and run it, all works just fine. It's only while trying to use the object within Flashbuilder that I have the problem. I see lots of ideas kicked around for this, and it seems that various solutions have worked for different users. Can somebody put together a 'cookbook' of just exactly how to set things up to make this work?
Thanks
Maybe you are looking for
-
Can I use my old iMac as a second screen for my new one?
I have an old iMac (about 4-5 years) that I don't use anymore and a new iMac that I just bought a few months ago. Can I us my old iMac as a second display for my new one? Its a slow computer now, but the screen is nice and big so it would be nice to
-
Failed software update (3.3.1) has rendered my iPod Touch useless
I am appealing for help here as I am pulling my hair out with this issue. This morning I went to update my 2nd Gen iPod Touch to 3.3.1 software. At what should have been the end of the update, it told me that it didn't recognize the iPod and wanted t
-
HT204291 Apple TV is asking for a code
Apple TV is asking for a code and I don't know how to enter that into my phone when trying to stream video from Amazon Video
-
My ipod serial no only have 10 digits
I don't understand, i try to enter my ipod serial no. and it only has 10 digits and it also has the HP symbol on the back. my friend got his about a month after me and he has 11 digits and doesn't have the HP symbol in the back... can somebody tell m
-
Final Extended Rebate Settlement - error
Hi, When doing final rebate settlement, via RBT_ENH_VB7, it is saying "No condition record found for rebate agreement". But we are able to do partial settlement. What does it mean?