Can't start xfce4
I'm ruining Arch 3.13.6-1-Arch 64bit.
I have nvivda-304xx(utils, opencl, libvdpau, libcl) installed.
I can't start Xfce4, using startx or from KDM.
I can run Kde but the windows have no titlebar and Alt-F2 only shows single letters when typing in a program.
In /var/log/kdm.log
kdemain: No DBus session -bus found.
Pook wrote:
Mesa seems to have renamed the shared library libEGL.so.1 into mesa-libEGL.so.1.0.0 which confuses just about everyone involved in launching the x server.
The fix for me was:
sudo ln -s /usr/lib/mesa-libEGL.so.1.0.0 /usr/lib/libEGL.so.1
If you're using mesa's libgl (i.e you're using open source graphics drivers), you need to install mesa-libgl, which sets up all the necessary symlinks for you.
$ pkgfile -l mesa-libgl | grep libEGL
extra/mesa-libgl /usr/lib/libEGL.so
extra/mesa-libgl /usr/lib/libEGL.so.1
extra/mesa-libgl /usr/lib/libEGL.so.1.0.0
Similar Messages
-
Hi,
I've a fully updated Arch 686/XFCE4 system configured (inittab) to automatically start in graphic mode(5).
I can login and start XFCE4.8 using SLIM, yet, as SLIM won't display existing users, I'd rather use GDM.
However, both GDM and XDM fail to start XFCE.
While using GDM I get displayed the existing users, yet, tail of everything log, already shows errors-see gdm1.log below.
Once I select a user, enter PW, I get a very partial GNOME desktop!-see gdm2.log below.
Please advise how use GDM to start XFCE!
Thanks!
========gdm1.log=========
Feb 9 17:35:45 localhost dhcpcd[1342]: eth0: checking for 192.168.1.104
Feb 9 17:35:44 localhost init: Entering runlevel: 5
Feb 9 17:35:50 localhost dhcpcd[1342]: eth0: leased 192.168.1.104 for 86400 seconds
Feb 9 17:35:50 localhost dhcpcd[1342]: forked to background, child pid 1364
Feb 9 17:35:50 localhost crond[1381]: /usr/sbin/crond 4.4 dillon's cron daemon, started with loglevel info
Feb 9 17:35:53 localhost polkitd[1475]: started daemon version 0.99 using authority implementation `local' version `0.99'
Feb 9 17:35:54 localhost gnome-session[1490]: WARNING: Could not launch application 'at-spi-registryd-wrapper.desktop': Unable to start application: Failed to execute child process "/usr/lib/at-spi/at-spi-registryd" (No such file or directory)
Feb 9 17:35:56 localhost gdm-simple-greeter[1503]: Gtk-WARNING: gtkwidget.c:5676: widget not within a GtkWindow
Feb 9 17:35:56 localhost gdm-simple-greeter[1503]: WARNING: Unable to read from file /etc/arch-release
Feb 9 17:35:57 localhost gdm-simple-greeter[1503]: WARNING: Unable to load CK history: no seat-id found
========================
===========gm2.log=====================
Feb 9 17:37:23 localhost pulseaudio[1606]: alsa-util.c: boundary : 1073741824
Feb 9 17:37:23 localhost pulseaudio[1606]: alsa-util.c: appl_ptr : 15504
Feb 9 17:37:23 localhost pulseaudio[1606]: alsa-util.c: hw_ptr : 15504
Feb 9 17:37:23 localhost gnome-session[1587]: WARNING: Could not parse desktop file /home/miki/.config/autostart/xfconf-migration-4.6.desktop: Key file does not have key 'Name'
Feb 9 17:37:23 localhost gnome-session[1587]: WARNING: could not read /home/miki/.config/autostart/xfconf-migration-4.6.desktop
Feb 9 17:37:23 localhost gnome-session[1587]: WARNING: Unable to find provider 'nautilus' of required component 'filemanager'
Feb 9 17:37:23 localhost kernel: fuse init (API version 7.15)
Feb 9 15:37:24 localhost rtkit-daemon[1608]: Successfully made thread 1643 of process 1643 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 9 15:37:24 localhost rtkit-daemon[1608]: Supervising 2 threads of 2 processes of 1 users.
Feb 9 17:37:24 localhost pulseaudio[1643]: pid.c: Daemon already running.
====================
Last edited by mibadt (2011-02-09 15:53:25)Thanks for the replies.
I tried both Slim, XDM and the updated GDM with the same result, suggesting it's the way the login managers are calling the XFCE4 session that is the problem, not the login managers.
Kern, unfortunately your tip didn't seem to work for me.
Too much stuffing around - back to using startx, I think.
Cheers
Francis -
[Solved] Can't start GParted from XFCE menu
Hi,
I have polkit installed but I can't start GParted from the XFCE menu. Do I need to edit any configuration files to make this work? The wiki isn't very clear about what to do after installing polkit. Thanks.
Last edited by kaixi (2012-11-02 15:09:12)In my Xfce4 installation, it's /usr/share/applications/GParted, which I copied over to ~/.local/share/applications/, as kaixi suggested, and it appeared there as gparted.desktop. Right-click for Properties > Launcher > Command, and in that field (not wanting to install gksu) I put sudo gparted, which works, thanks.
-
Cannot start XFCE4 as regular user
Unable to load a failsafe session
Unable to determine failsafe session name. Possible causes: xfconfd isn't running (D-Bus setup problem); environment variable $XDG_CONFIG_DIRS is set incorrectly (must include "/etc"), or xfce4-session is installed incorrectly.
i have installed dbus, and Add it to the DAEMONS array in /etc/rc.conf to start it at every boot.
http://wiki.archlinux.org/index.php/Beg … otplugging
and starts Xfce4 desktop environment using " exec ck-launch-session startxfce4 ".
http://wiki.archlinux.org/index.php/Beg … 28again.29
it still have problems.
But when i install xfce4-goodie, after shutdown and reboot.
i can start XFCE4 as regular user using "startxfce4", but when i logout , login root and logout root,
login as regular user, the problems again ......
i will try it tomorrow, whether is it i can login as regular user when i reboot my computer??i can login as regular user after reboot, but when i logout and login,
the problems again ......
error i just can remembered
Fatal: module Fbcon not found
config/hal:NewInputDevices Failed. (8)
config/hal:NewInputDevices Failed. (8)
config/hal:NewInputDevices Failed. (8)
mkdir: cannot create /root/.config. Permission Deny.
mkdir: cannot create /root/.cach. Permission Deny.
Any ideas? -
Error "can not start the configuration in parallel does not correct"
Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error -
Can not start data Collection service
I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?
-
I can not start secion in creative cloud from a macbook
I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
En español.
No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
we want a valid and positive responseHello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
Please let me know if you are successful or not. -
Can not start Enterprise Manager web page
I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Dondiego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config" -
"can not start a job" issue in AWM
Hi ALL,
I am maintaining my cube from PLSQL with following options
1. buildtype = "BACKGROUND"
2. trackstatus = "true"
3. maxjobqueues = 3
i get following error when i see the "olapsys.xml_load_log" table
***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
Hi Keith, it will be great if you can answer this one.
My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
Kind Regards,
QQ
Message was edited by:
dwh_10gApplies to:
Oracle OLAP - Version: 10.1 to 11.1
This problem can occur on any platform.
Symptoms
- We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
- When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
- However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
13:29:39 ***Error Occured in BUILD_DRIVER
- In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
hv=1976722458 ad='76dd8bcc'
begin
DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
'DEFAULT_JOB_CLASS', true, true, :3); end;
END OF STMT
PARSE
#20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
1176987702325167
ERROR #20:err=27486 tim=465202984
Cause
User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
Solution
1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
e.g.
SELECT user_id,username FROM all_users WHERE user_id=91;
2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
3. Ensure that the CREATE JOB privilege is listed.
The CREATE JOB privilege can be granted in various ways to a user:
- via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
GRANT OLAP_USER TO <username>;
- explicitly
GRANT CREATE JOB TO <username>; -
New install - starting xfce4 returns blank sreen.
Hi All,
I have just attempted my first Arch install, on a Toshiba Tecra A10 laptop.
The install went through fine, after configuring the network I have updated the system successfully but I'm having a problem getting my DE running.
I installed xfce via the following commands (as root)
pacman -S xorg
pacman -S xfce4
pacman -S xfce4-goodies
When I try to start xfce4 via "startxfce4" the screen goes blank (entire screen is black with two white underscore type things at the top of the page)
I have tried to start xfce4 as a non root user (user created via "useradd -m -g users -G audio,lp,optical,storage,video,wheel,games,power,scanner -s /bin/bash hardeep" but that also returns the same blank screen.
Using this same workflow I was able to get xfce4 running in Virtual Box so I assume the problem is with the video card drivers.
I did try to install a video driver via:
pacman -S xf86-video-nv (i'm pretty sure the Toshiba A10 has a Nvidia card)
That didnt help, I also gave the generic vesa driver a go but again same problem.
Any ideas on this would be much appreciated.
thanks
HardeepJust out of curiosity, because I don't know XFCE well and so it probably won't work: did you try just starting it through "startx" instead of startxfce? Also, boot it with the nomodeset grub option and, if it still refuses to work, post the output of xorg.conf (if you have one, otherwise pastebin the Xorg.0.log)
EDIT: please tell me you put the nv module to load in the MODULES section of rc.conf?
EDIT2: Is THIS your computer? Because it has an intel graphics chip. If it is, problem solved...
Last edited by admiralspark (2011-01-13 00:03:27) -
I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
iTunes wont install. It says "The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked. Help!!!!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683) -
When installing itunes get error "program can't start because msvcr80.dll is missing
I cancelled the installation of the latest version of iTunes on my Windows PC and when attempting to reinstall it, I now get a message that "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix the problem." Reinstalling the program does not fix the problem. Repairing the installation does not fix the problem. A search shows the "missing" file does exist in the MSOCache directory.
Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue
for additional help:
ASC user turingtest2 contribution: Troubleshooting issues with iTunes for Windows updates
or for specific Windows versions:
Apple HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Apple HT1925: Removing and Reinstalling iTunes for Windows XP -
When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.
Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates -
SAP dispatcher status is stopped in Console how can i start it
Hi All
Help me out
*SAP dispatcher status is stopped in Console how can i start it
Dispatcher turns green to yellow suddenly and status changes to stopped and all WP elemets shows status as ended.
Alert from Syslog : SAP Basis System: Message server disconnected
Tracert : Disp+work.exe
trc file: "dev_disp", trc level: 1, release: "640"
Thu Oct 02 12:32:52 2008
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 21
intno 20020600
make: multithreaded, ASCII
pid 736
***LOG Q00=> DpSapEnvInit, DPStart (00 736) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 21 successfully loaded
shared lib "dw_xtc.dll" version 21 successfully loaded
shared lib "dw_stl.dll" version 21 successfully loaded
shared lib "dw_gui.dll" version 21 successfully loaded
Thu Oct 02 12:32:58 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05270040, size: 2505416)
DpShMCreate: allocated sys_adm at 05270040
DpShMCreate: allocated wp_adm at 052717A8
DpShMCreate: allocated tm_adm_list at 05273188
DpShMCreate: allocated tm_adm at 052731B0
DpShMCreate: allocated wp_ca_adm at 054910F8
DpShMCreate: allocated appc_ca_adm at 05495748
DpShMCreate: allocated comm_adm_list at 05496EB8
DpShMCreate: allocated comm_adm at 05496ED0
DpShMCreate: allocated vmc_adm_list at 054C5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 054C5CF8
DpShMCreate: allocated wall_adm at 054C5D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2450 MB
<ES> 2449 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( home) [dpxxdisp.c 9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 21
Release check o.K.
Thu Oct 02 12:33:38 2008
ERROR => W0 (pid 1500) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3796) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3548) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 1464) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3368) died [dpxxdisp.c 12170]
ERROR => W5 (pid 3400) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2620) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 380) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3796 (SIGUSR2)
ERROR => DpWpKill(3796, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3548 (SIGUSR2)
ERROR => DpWpKill(3548, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1464 (SIGUSR2)
ERROR => DpWpKill(1464, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3400 (SIGUSR2)
ERROR => DpWpKill(3400, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2620 (SIGUSR2)
ERROR => DpWpKill(2620, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-380 (SIGUSR2)
ERROR => DpWpKill(380, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:48 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Oct 02 07:03:48 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1500 Ended no 1 0 0
1 DIA 3796 Ended no 1 0 0
2 UPD 3548 Ended no 1 0 0
3 ENQ 1464 Ended no 1 0 0
4 BTC 3368 Ended no 1 0 0
5 BTC 3400 Ended no 1 0 0
6 SPO 2620 Ended no 1 0 0
7 UP2 380 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 02 07:03:48 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
8
8
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Thu Oct 02 07:03:48 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Oct 02 07:03:48 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:53 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (676) (SOFT_KILL)
Stop icman
killing process (924) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:676 HANDLE:1564)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:54 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:676 HANDLE:1564)
[DpProcDied] Process died (PID:924 HANDLE:1556)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'home'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1572
MsIDetach: detach MS-system
EsCleanup ....
Thu Oct 02 12:33:55 2008
***LOG Q05=> DpHalt, DPStop ( 736) [dpxxdisp.c 8478]
Good Bye .....
Trace from WP table DIA 1
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 02 12:32:59 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.19)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 21
M intno 20020600
M make: multithreaded, ASCII
M pid 1500
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1500) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 6624 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05A70040, size: 2505416)
M DpShMCreate: allocated sys_adm at 05A70040
M DpShMCreate: allocated wp_adm at 05A717A8
M DpShMCreate: allocated tm_adm_list at 05A73188
M DpShMCreate: allocated tm_adm at 05A731B0
M DpShMCreate: allocated wp_ca_adm at 05C910F8
M DpShMCreate: allocated appc_ca_adm at 05C95748
M DpShMCreate: allocated comm_adm_list at 05C96EB8
M DpShMCreate: allocated comm_adm at 05C96ED0
M DpShMCreate: allocated vmc_adm_list at 05CC5CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05CC5CF8
M DpShMCreate: allocated wall_adm at 05CC5D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSUD's password
C Connecting as /@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
C Try to connect with default password
C Connecting as SAPSUD/<pwd>@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1195] [dbsh 1195 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1271]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9379]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server home_SUD_00 on host home (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 02 12:32:59 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 246]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1500) [dpnttool.c 357]
Thanks in advance please help me out
Edited by: sudhakar aleti on Oct 2, 2008 12:54 PM
Edited by: sudhakar aleti on Oct 2, 2008 12:56 PMHi All please find the result r3trans -d
4 ETW000 r3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 03.10.2008 - 11:02:35
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Oct 03 11:02:36 2008 5494 0.005494
4 ETW000 [dev trc ,00000] db_con_init called 40 0.005534
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 26 0.005560
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 33 0.005593
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 139566 0.145159
4 ETW000 [dev trc ,00000] using "C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll"
4 ETW000 22 0.145181
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 7 0.145188
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 13 0.145201
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.19)
4 ETW000 2501 0.147702
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 12 0.147714
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 18 0.147732
4 ETW000 [dev trc ,00000] New connection 0 created 13 0.147745
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 15 0.147760
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 12391 0.160151
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 12 0.160163
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 14 0.160177
4 ETW000 [dev trc ,00000] Found ORACLE_HOME=C:\oracle\ora92 in Registry 796 0.160973
4 ETW000 [dev trc ,00000] -->oci_initialize 400 0.161373
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
4 ETW000 34020 0.195393
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: TNS-name missing 11 0.195404
2EETW169 no connect possible: "DBMS = ORACLE --- TWO_TASK = ''"
Thanks
Sudhakar A
Maybe you are looking for
-
Ipod touch 3rd generation is stuck in "waiting for changes to apply" during sync
My iPod touch 3rd generation is stuck at "waiting for changes to apply" during sync. I have the latest update and the latest version of iTunes downloaded. Any suggestions for a remedy to this problem? Thanks!
-
How to send Java mail with attachment?
Could you please provide the sample codes using the javax.mail api for sending an email with an attachment?
-
Need to delete /usr/bin without using terminal
In a bit of a bind. All how-tos detailing how to delete or alter the /usr/bin file involve terminal, but terminal won't work b/c of this error login: PAM Error (line 396): System error login: Could not determine audit condition [Process completed] I
-
Startup errors on Oracle 9i Dev Suite frm Unix srvr
Trying to startup Dev Suite from a Windows 2000 client. The Developers Suite is installed on a Sun Blade Unix server. From Xterm I enter the command ./f9090desm.sh to run the Forms application and get the following errors: FRM-91111: Internal Error:
-
"execute applescript on output" woes....
I have been integrating Compressor 3 with an automated system to convert media files to other formats. One of the great features of Compressor's settings is the "Execute Applescript on Output" option. This option works flawlessly when using Apple's i