Can't stop oracle replication without affecting existing table...

Hi All,
I am facing some problem with oracle replication set up. I have a replication set up already running fine. There is a table called Emp_temp in the replication group which is in ASYNCHRONOUS mode(replicating data for every 15 min). My application is writing data into this table which is in primary server (there are only two servers in the set up i.e. primary and secondary).
I want to stop the replication but my application should keep on writing to Emp_temp table even after replication stopped. But when I stopped the replication (through oemapp GUI) my application is throwing errors stating that it could not commit to that table. Can anyone tell me how to gracefully stop the replication? Is there any way even after stopping the replication application can continue writing to the Emp_temp table?
My application talks to the Oracle using OCI.
Error in my application log is: "Error ORA-23326: object group "PUBLIC"."ASYNCH" is quiesced"
Oracle Version using: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
OS: Solaris 10
Your early reply is highly appreciated
Thanks in advance.
Regards,
Iqbal

Hello
Yes, breaking the PUSH job would be the only solution. In multimaster replication the changes are applied on the remote site through the PUSH job hence you should mark this job as BROKEN to stop the replication.
If you QUIESCE (or SUSPEND) the replication group via OEM, then it would not allow any DML changes to the tables in the replication group. Hence you should break the PUSH job instead of SUSPENDing the Replication Group.
Again, you should re-enable the PUSH job at the earliest else the base queues for replication would grow very fast in a high OLTP system. Once these queues have grown considerably then that could raise performance problems with the PUSH job.
Hope this helps.
Thanks,
Rijesh

Similar Messages

  • HT201250 The initial backup is taking 2 days.  Can I stop and restart without any issues?

    Just got an iomega external hard disk backup and the initial backup is said to take two days.  Can I stop and restart without any issues?

    On a big backup, the initial estimate is often wrong and gets better after a little while. But, yeah, there is a "Stop backing up" command in the Time Machine menu, right?  That is safe as far as I know.
    charlie

  • I can't stop my music without turning the ipod off

    I can't stop my music without turning the ipod off

    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • Oracle partitioning - change in existing tables

    I recently started working with legacy code and noticed that some huge tables (5 years worth of data, don't have more details on me right now but can post later if needed) are partitioned based on time sequence number column while majority of queries are done based on time (different column). Queries performance is degrading over time and I'd like to try to modify partitioning and run some tests to see if there is a performance improvement.
    My only concern is this is a lot of data and they are all live, so I have to come up with some sort of solution on how to switch partitioning with the least impact on applications running 24 x 7.
    Can someone suggest a viable solution? Something you have done in the same situation and it worked?
    If there is a certain technique on how to do it, please give me search keywords and I will google the rest.
    Thanks,
    S.

    You can't change the partitioning of an existing table.
    You can, however, use the DBMS_REDEFINITION package to do an online redefinition. Behind the scenes, what you're really doing is
    - Creating a new table with the new partitioning scheme
    - Copying the data from the old table to the new table
    - Dropping the old table
    - Renaming the new table to the name used by the old table
    Now, if the large table is only being queried, not updated (or at least you have a window where it is read-only), it's probably easier to just do these steps manually rather than using DBMS_REDEFINITION where you at least have finer grained control over the steps. You'll still need a moment where the table is inaccessible to do the actual rename.
    Justin

  • Can we stop down payment without down payment request?

    Dear friends
    Can we stop the down payments through F-48 without down payment request?
    If so how to do that?
    Regards
    Kiran A

    Dear Kiran,
    Please don't select the 'Request' button.
    and AT F110.
    Tcode: FBZP - All company codes -
    Vendors  Sp. G/L transactions to be paid 
    remove the "F"  
    then Down payment requests will not fun at F110.
    Reg
    Madhu M

  • Add style to large block of text without affecting existing styles within that text

    Hello! First post here.
    I have a long document of text that mostly does not have text styles attached (this was a mistake). However, there is a large number of areas of styled text within.
    Is there a way to select all the text and apply a style to only the unstyled text without affecting the existing styles?
    Doing this by hand text block by text block would take a long long time.
    Any help is greatly appreciated.
    THX!
    Ian

    winterm wrote:
    What do you mean by "unstyled text"? It must have some definition, anyway.
    Like others, [No Paragraph Style] and [Basic paragraph] are searchable, too.
    boomshakalaka! Thanks! Im familiar with this panel but didnt see how to specify 'Character Style: [No Character Style]'.
    Had to click on the icon

  • HT201612 When I installed Windows on my Macbook I allocated too much disk space to Windows, thus reducing the disk space available for MAC OS 10.6. Can I reallocate disk space without damaging existing Mac aplications, files, etc?  Thank you.

    n I use Boot Camp (Assistant) to change the percentage of disk space allocated to each, without damaging existing MAC applications, files, etc.?  Thanks in advance.

    make sure Windows will also have the room for updates, cache, page, hibernation, and growth with 20% free space; and Mac should also have 20% or more after accounting for growth.
    Spend the $19 and save the headaches with CampTune but backup both - CampTune should help with that chore also but also TimeMachne and clone OS X.
    Paragon CampTune for Mac

  • How can i use Oracle Adpaters without BPEL

    I want to ask how to use adapters without using BPEL.
    Is there any document about that ?
    All document i read using the adpater inside BPEL project.
    Thanks in advance,

    Hi,
    If you are refering to iWay Supplied adapters (like JDE, SAP, PeopleSoft etc. also known as Oracle Adapters) and using them from outside BPEL, then you can very well use them outside BPEL.
    All the adapters can be deployed on to your Oracle Application Server as Resource Adapter for JCA access and also you can deploy Oracle Business Service Engine (OBSE/ iBSE) a servlet apps onto your Apps Server for Web Service generation.
    Hope this is of any help.
    Best Regards,
    Sandipan

  • Can We Install Oracle 9i without Apache ? How ?

    Hi,
    We have already Web Logic Web Server and Application Server in out Server, and when i try to install Oracle 9i, it always forces us to install Apache Web Server ? Cen we install Oracle Without Apache ? If so How to do it ?
    Urjent,
    Pillai.

    hi
    a foot note of the table 6 in SRSP for obiee 10.1.3.4 on page 17 reads
    obiee
    "1. Windows and Linux 64-bit support: For the Windows and Linux releases, the Oracle BI EE software is 32-bit. The
    software can run on 64-bit processors that support 32-bit emulation. The supported processors are AMD64 and EM64T.
    NOTE: Revisions A and B of this guide incorrectly listed Itanium2 as a supported processor"
    processor should support em64t & also enabled at bios level w/ compatible firmware.
    dac
    table 2 in srsp for dac 10.1.3.4 lists windows x64 as compatible
    odbc32-bit vs odbc64-bit
    note on page 72 from Oracle Business Intelligence Infrastructure Installation and Configuration Guide Version 10.1.3.2.1 reads:
    For Windows 64-bit operating systems, the Oracle BI Server ODBC driver is a 32-bit
    application. Use the 32-bit version of ODBC Data Source Administrator located at
    C:\Windows\SysWOW64\odbcad32.exe.
    The 64-bit version of the ODBC Data Source Administrator (located at
    C:\Windows\system32\odbcad32.exe) does not show the Oracle BI ODBC driver.hth
    PS: It is always a good practice to go through manuals

  • Add cover sheet without affecting existing page numbering?

    I guess the lack of response means either that my question is inappropriate in some way or else it's difficult or impossible to answer! Thanks for letting me post it anyway!
    This seems to be a very informative site (just figured out how to access it and read the responses to all the questions), and I know I'll learn a lot from reading it in the future---so thanks on that account also.   ---JCI
    ORIGINAL QUESTION:
    Hi,
    I have a script that inserts a new page (a cover sheet) at the beginning of a document (a chapter from a book) and makes a few other tweaks. It works perfectly _except_ for the following glitches:
    (1) The pages shuffle (I would like the cover sheet to be a recto page and the first page of the document to be a recto page as well; the rest are facing pages ).
    (2) The pages renumber (I would like to the cover sheet to be an invisible page number roman numeral "i" and the first page of the document to be page 1.1.
    (3) If I just renumber the pages manually, I also have to retype all the section names that have been inserted previously into the section marker field (I have about 160 documents to work on, so....)
    Is there any way to have the script avoid these problems? Please note that I inherited this script and know virtually nothing about scripting. Any help you can give—including any thoughts on whether coming up with such a script would even be possible—will be greatly appreciated!! Here is the script (and thanks in advance!):
    var myFolder = Folder.selectDialog ("Choose a Folder");
    var myFile;
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
    if(myFolder != null){
        myFile = myFolder.getFiles();
        for(i=0; i<myFile.length; i++) {
            app.open(File(myFile[i]));
    // insert page at beginning and apply master page
            app.activeDocument.pages.add(LocationOptions.AT_BEGINNING);
            var myMasterSpread = app.activeDocument.masterSpreads.item("C-WebP1");
            app.activeDocument.pages[0].appliedMaster = myMasterSpread;
    // find and remove "[advanced release]" from document
              app.findChangeTextOptions.includeMasterPages = true;
              app.findChangeTextOptions.caseSensitive = false;
              app.findTextPreferences.findWhat = "[advance release]" ;
              app.changeTextPreferences.changeTo = " ";
              app.activeDocument.changeText();
              app.findTextPreferences = null;
              app.changeTextPreferences = null;
    // determine if last page is blank and if so, delete
             var Lpage = app.activeDocument.pages.lastItem();
             if(Lpage.pageItems.length==0&&Lpage.guides.length==0){
                    Lpage.remove();
    // save and close file
            app.activeDocument.save(new File(myFile[i]));
            app.activeDocument.close();
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
    Message was edited by: J Shee

    Try this,
    var myFolder = Folder.selectDialog ("Choose a Folder");
    var myFile;
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
    if(myFolder != null){
        myFile = myFolder.getFiles();
        for(i=0; i<myFile.length; i++) {
            app.open(File(myFile[i]));
    // insert page at beginning and apply master page
                var _page = app.activeDocument.pages.add(LocationOptions.AT_BEGINNING);
                var myMasterSpread = app.activeDocument.masterSpreads.item("C-WebP1");
                app.activeDocument.pages[0].appliedMaster = myMasterSpread;
                var section = doc.sections.add(_page);
                section.pageNumberStyle = PageNumberStyle.LOWER_ROMAN;
                var section1 = doc.sections.add(doc.pages.item(1));
                section1.continueNumbering = false;
                section1.pageStart = doc.pages.item(1);
                section1.pageNumberStart = 1;
                section1.sectionPrefix = "1."
                section1.pageNumberStyle = PageNumberStyle.ARABIC
    // find and remove "[advanced release]" from document
              app.findChangeTextOptions.includeMasterPages = true;
              app.findChangeTextOptions.caseSensitive = false;
              app.findTextPreferences.findWhat = "[advance release]" ;
              app.changeTextPreferences.changeTo = " ";
              app.activeDocument.changeText();
              app.findTextPreferences = null;
              app.changeTextPreferences = null;
    // determine if last page is blank and if so, delete
            var Lpage = app.activeDocument.pages.lastItem();
            if(Lpage.pageItems.length==0&&Lpage.guides.length==0){
                    Lpage.remove();
    // save and close file
            app.activeDocument.save(new File(myFile[i]));
            app.activeDocument.close();
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
    Regards,
    Chinna

  • Re-installing i-tunes software so i can sync my i-phone without losing existing i-tune files

    I need to re-install i-tunes as the software has mysteriously disappeared, so can't sync my i-phone 4 any more, however I don't want to lose files already stored in i-tunes on my computer.
    Can anyone help please?

    Well, unfortunately, the external hard drive only stores the music files. The playlists will have been on the old machine, easily recoverable, or on the iPod, possibly recoverable.
    As it is, you may just have to rebuild your library, foregoing your playlists, ratings, etc.
    To do this, go to edit\prefs\advanced, and make sure the following settings are selected:
    DO NOT copy to iTunes folder when adding to library
    DO NOT keep iTunes folder organized
    Now, go to the external, and drag the entire music folder into iTunes.
    Then, go back to edit\prefs\advanced, and change the folder back to the external.
    <hr>
    In the future, consider occasionally saving the two library files (.xml, .itl) from My Music\iTunes to the external.
    hudgie

  • How can i stop oracle from running when my computer startup?

    hi,
    i guess the title explain it, i don't have much rams and when oracle run slow down the startup, i want to start it manualy, is that posible?
    thx in advance

    Here's a command line tool for working Windows Services. I wouldn't know exactly what to do b/c I don't have it installed on Windows. Good luck
    C:\tcpmon-1.0-bin\build>sc config
    Modifies a service entry in the registry and Service Database.
    SYNTAX:
    sc <server> config [service name] <option1> <option2>...
    CONFIG OPTIONS:
    NOTE: The option name includes the equal sign.
    type= <own|share|interact|kernel|filesys|rec|adapt>
    start= <boot|system|auto|demand|disabled>
    error= <normal|severe|critical|ignore>
    binPath= <BinaryPathName>
    group= <LoadOrderGroup>
    tag= <yes|no>
    depend= <Dependencies(separated by / (forward slash))>
    obj= <AccountName|ObjectName>
    DisplayName= <display name>
    password= <password>

  • Can I change Base DN without affecting Current Users Permissions

    I have deploed Live Cycle ES2 Rights Management about 2 years ago with a very limited user group for my base DN
    Current Base DN
    OU=mysite,OU=mycorp,DC=corp,DC=com
    I want to change it now to
    OU=mycorp,DC=corp,DC=com
    Since i am broadning the scope i just wnat to ensure it will have no effect on my current users permission for secure docs.
    Can anyone confirm this?
    Thanks,
    Version: 9.0.0.0, GM Patch Version: SP1 Service Pack Version: 9.0.0.1.20100511.1.236952
    Chad

    I would have to test the scenario but I think that these users would be considered new users and they'll get disconnected from the policies. I may be totally wrong but this is definitely something I'd do on a test machine.

  • Partitioning an Existing Table with data

    Hi All,
    I am few tables with data, I need to Partition the table without affecting existing table values is it possible?.
    if yes then Please suggest me some ideas to archive that..
    Thanks & Regards
    Sami

    Hi All,
    I Need to partition for existing table with 1 million records
    1. First partition should be created for 6 months
    2.Second partition should created for 1 year.
    3.So as of now we have 6 months Data in production + another 6 months data in First partition + another 1 year data in Second partition.
    4.More than 2 year’s data’s should be moved other partition or archived.
    kindly provide your valuabe suggestion.
    Thanks & Regards
    Sami

  • HT1420 I have used up the amout of authorized computers for one account, however two of them have crashed. How can I deauthorize those two without having to deauthorize the other three?

    I have completed my list of 5 computers authorized. I am trying to authorize another one but I need to get rid of two authorized computers which hard disks have crashed. How can I deauthorize those two without affecting the other three?

    Individual computers can only be deauthorised directly on them, but if you've reached the 5 computer limit then you can log into your account and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.

Maybe you are looking for