Can't switch directly from 10.4.8 to 9.2.2

I can't switch directly from 10.4.8 back to 9.2.2. I'm using the startup disk utility. While in 10.4.8, if I choose my 9.2.2 volume I get a crash when 9.2.2 tries to start up. The only workaround I have found is to switch to a 3rd disk (10.3.9) and then restart to 9.2.2. I had no problems switching between X and 9 before I upgraded to 10.4.8. A minor inconvenience at this point, but one I would like to eliminate. Any suggestions?
Other details: 9.2.2 lives on my internal HD, 10.3.9 and 10.4.8 each reside on their own external Firewire drives.
Quicksilver G4   Mac OS X (10.4.8)  

Try rebuilding the OS 9 desktop.

Similar Messages

  • Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?

    Can I upgrade directly from ColdFusion 9 Enterprise to ColdFusion 11 Enterprise without going to 10 first?
    For those who have done this,
    1.  What quirks did you find that you had to overcome in your installation (I know that everyone's environment is different and produces differest results)?
    2.  What part of your code broke for which you had to find fixes?
    Tips and suggestions for a smooth installation, besides following the installation document.
    Thanks!

    Create a car (archive file) in CF 9 enterprise which will capture all CF 9 settings like Data sources, Web services etc. Make sure when you are doing this, pop up blocker is disabled.
    NOTE : While creating the archive file, give the full name with the absolute path in the package name. For example C:\Test\mypackage.car
    Then move this car file into the server where you want to install CF 11. Install CF 11 and then  deploy this archive (car) file. All CF 9 settings will be migrated to CF 11 enterprise.
    Else, if you want to install CF 11 on the same server where CF 11 is installed, then remove the connector for all the websites which are configured with CF 9, make sure the CF 9 services are running and then run the CF 11 installer and at the end of CF 11 installation, you will get a dialogue box which will ask you to migrate CF 9 settings in CF 11.
    Run the Code Analyzer in CF 11 Administrator to check whether any the CF 9 code used in your application is breaking in CF 11 or not
    HTH
    VJ

  • How can I print directly from my iPad to my new Primax 3260 printer when I have no computer. Do I need a portable single unit Router?

    How can I print directly from my iPad to my new Primax 3260 printer when I have no computer? Do I need a portable one to one Router for the wiFi connection. My Internet is through Telstra 3G system.

    Is your printer a wifi printer or hard wired only? If it's a wifi printer then you might want to look into third party apps like Print n Share or Print Central which allow a version of air printing to non-air print printers.
    You may also want to look on the manufacturer's site. Maybe they have a fix for you.
    If your printer isn't wifi, then you will need a router to get it on a wifi network to print to it. As far as I know, there is no support for the iPad to do wired printing.

  • I can no longer send emails from my mac yahoo business account, but can send them directly from yahoo. just not from mac mail. I've been able to send emails perfectly fine until today. Help!

    I can no longer send emails from my mac yahoo business account, but can send them directly from yahoo. just not from mac mail. I've been able to send emails perfectly fine until today. I've been on the phone with yahoo mail and they've verified that my account settings are correct and I can send email from yahoo. I can receive emails via Mac mail, but just can't send them. An error message appears that says:
    "Sending the message content to the server failed." I can't send emails from my Mac desktop, iphone or ipad. Any suggestions! Help! I'm a Mac rookie and so frustrated! Thanks.

    Please read and begin using Can receive email, but not send email. I had a similar issue with Comcast mail (could receive by not send) and found my answer in this letter. For me it took resetting the outgoing mail and telling the system to use a password when sending outgoing mail. If you need help with that please advise and I'll tell you where to look. 

  • HT1515 i want to know that how can i print direct from my pc, and i also want to knw that can i directly print from my ios device.

    i want to know that how can i print direct from my pc, and i also want to knw that can i directly print from my ios device.

    To print from your PC, please check out the following iFelix article.
    To print from an iOS device (iPhone, iPod Touch, or iPad), the printer must be AirPrint-ready. If the printer is not, another option would be to use something like.
    Also you can check out this Apple Support article.

  • How can i switch account from U.S. store in Romania store?

    How can i switch account from U.S. store in Romania store?

    see here
    http://support.apple.com/kb/HT1311

  • Can't Import Directly from Card Reader or Camera anymore

    I am using aperture 2.x and all of a sudden I can't import directly from my G9, 30D or San Disk card reader anymore. I have to copy files locally first to make this work.
    This is what happens: I can see and select the thumbnails off the card just fine but when I select all and import it immediately says "0 files imported".
    Any ideas?
    pete

    Mauronic wrote:
    For the record, the last thing I want to do is add another step to my workflow (actually several steps) by copying my data to an intermediate location first. So still interested in solving this issue.
    For the record, the workflow you describe is a good way to lose image data. The anomalies that you are experiencing should be a clue; you could just as easily be losing image data.
    I guess it just depends on how important the images are to each individual photog,
    -Allen Wicks

  • Can I upgrade directly from CS3 to CS5?

    Can I upgrade directly from CS3 to CS5?

    Deactivate CS3 on your old computer. Install and activate CS3 on your new computer. After you have done that, you can upgrade to CS5.
    From the forum thread posted earlier: If CS3 is detected by the installer as being already installed in the machine, it will read the old serial number transparently and will prompt you only for the serial number for CS5.

  • HT4854 Can I upgrade directly from OS X 10.6.8 to Mountain Lion

    Can I upgrade directly from OS X 10.6.8 to Mountain Lion??

    Yes, you can, but make sure your machine meets the system requirements:
    http://www.apple.com/osx/specs/
    When you upgrade, you need to do the following:
    1) Check all your software for compatibility with the new system.
    2) Repair the hard drive with Disk Utility.
    3) Make a full backup of your whole system using Time Machine.
    4) Ideally, make a second full backup of your whole system using something else, like Carbon Copy Cloner. (I consider two backups to be the minimum.)
    5) Wait until you have time to deal with any possible problems that crop up.
    6) Install the upgrade.
    Some people recommend erasing your hard drive and installing the new system "cleanly." That certainly helps ensure that you don't have any problems with the new system, but is often unnecessary. I prefer to save clean installs for when they are actually necessary, but that is only an opinion. You can certainly choose to do a clean install if you prefer.

  • Can I upgrade directly from elements 3 to the latest version?

    Can I upgrade directly from Elements 3  to the latest version?

    Yes. But compare prices. Sometimes sites like Amazon have a lower price for the full product rather than the upgrade version. They are identical; so buy whichever is cheapest.

  • Can I upgrade directly from..?

    Hi,
    I have a Panther 10.3 full version and I have purchased Tiger 10.4 a couple of months ago which is an upgrade version. I haven't got the chance to install it because I am moving to another country.
    I would like to know can I upgrade directly from 10.3 or I have to upgrade step by step till 10.39?
    Thank you

    Well, according to Apple's Tech Specs for Leopard (http://www.apple.com/macosx/techspecs/), you'll be just fine if you upgrade directly.
    I would upgrade to Tiger first though, and play it safe.

  • How can I upload directly from photos to facebook?

    How can I upload directly from photos to facebook?  There use to be a button to send to facebook, now its gone.

    There was NEVER a button to send directly from photos to facebook. The iPhone has NEVER had facebook integration. Download the facebook app and use that.

  • How can I print directly from my IPad to my network printer?

    How can I print directly from my IPad to my network printer?

    Take a look at the application Printopia. It's an application for your Mac, if in fact you have a Mac. Works great here. Cost is about $10 (US.)
    I'm not sure how it will work with a network printer. Probably depends on your setup.
    dick glendon

  • Why i can not hear directly from my iphone without using hand free?

    why i can not hear directly from my iphone without using hand free?

    Hello oshoke21,
    The following article provides steps that can help get your iPhone's speaker working.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    Allen

  • I can't email directly from iphoto

    I can't email directly from iPhoto.

    i just had the exact problem..
    tells me the email sever not recognized..
    used another email account- tells me password not recognized...
    deleted and reinstalled both accounts....same thing happens...
    any ideas?

Maybe you are looking for

  • Reverse Document Post with ABF1

    Hello I have used the transaction ABF1 to post documents with reconciliation AA account. Know i need to reverse some documents that are not ok. Does anyone know if exist any transaction to do that? Thanks and Regards Joao Simoes

  • Java/Excel interface

    Hello everybody!! I am doing an MSc Dissertation at the moment and was wondering if anyone could tell me how to get a tab delimited text file and use Java to create it in to an Excel spreadsheet format? This new spreadsheet will then need to be modif

  • Login page keeps going to "Create new user account" on login

    For about 3 weeks, whenever I log in, the next page I get is nearly always the "Create new user account" page. This happens regardless of whether I wait to let AutoFill enter my user name and password or whether I fill in the correct info myself. Whe

  • Exception in Approval Process

    Hi, I am working on creating an approval process. To block an account I need it to go through some approval first. I have followed all the steps as mentioned in the help doc but I am facing some issues. I have created a custom BO (CustomerBlock.bo) a

  • 10.6.5 losing server connections

    Since updating to 10.6.5 I constantly get the message "Server connection interrupted". I'm working on my Macbook Pro (10.6.5) and I lose the connection to my ReadyNAS NV+ (4.1.7) and my Mac Mini (10.6.5). I was rebuilding my iPhoto library from my Ma