Can't switch VT's with Ctrl+Alt+Fx or Ctrl+Alt+backspace terminate

Ctrl+Alt+F2 doesn't seem to register. It's been a long term issue I have had for years. I've tried all the various fixes.
I can manually change to virtual terminals without issues using:
sudo chvt 2
Once I'm in a VT I can use Alt+Fx to change between them, until I go back into Xorg. So it's unlikely to be a graphics driver problem, most other people with similar issues complain of getting a blank screen.
Although without sudo I get
# chvt 2
Couldn't get a file descriptor referring to the console.
I have the following in /etc/X11/xorg.conf.d/15-forcevt.conf
Section "ServerFlags"
Option "HandleSpecialKeys" "always"
Option "DontVTSwitch" "false"
Option "DontZap" "false"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
A also enabled the terminate option in gnome-tweak-tool.
xmodmap -pke has the following:
keycode 67 = F1 F1 F1 F1 F1 F1 XF86Switch_VT_1
keycode 68 = F2 F2 F2 F2 F2 F2 XF86Switch_VT_2
Nothing is printed in Xorg logs when I try pushing the keys.
I'm using SLIM (although I tried manually via startx), AwesomeWM (also tried fluxbox with a blank conf), nvidia (proprietary), UEFI.
[ 2490.220]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 2490.225] X Protocol Version 11, Revision 0
[ 2490.227] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 2490.229] Current Operating System: Linux ender 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 2490.229] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux root=UUID=ff84efeb-e43f-47fe-a14d-07894feb0013 rw rootflags=subvol=@ quiet
[ 2490.233] Build Date: 14 March 2015 06:45:50PM
[ 2490.234]
[ 2490.236] Current version of pixman: 0.32.6
[ 2490.240] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2490.240] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2490.247] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 1 10:44:03 2015
[ 2490.249] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2490.250] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2490.250] (==) ServerLayout "Layout0"
[ 2490.250] (**) |-->Screen "Screen0" (0)
[ 2490.250] (**) | |-->Monitor "Monitor0"
[ 2490.251] (**) | |-->Device "Device0"
[ 2490.251] (**) |-->Input Device "Keyboard0"
[ 2490.251] (**) |-->Input Device "Mouse0"
[ 2490.251] (**) Option "DontVTSwitch" "false"
[ 2490.251] (**) Option "DontZap" "false"
[ 2490.251] (**) Option "Xinerama" "0"
[ 2490.251] (==) Automatically adding devices
[ 2490.251] (==) Automatically enabling devices
[ 2490.251] (==) Automatically adding GPU devices
[ 2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2490.251] Entry deleted from font path.
[ 2490.251] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2490.251] Entry deleted from font path.
[ 2490.251] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2490.251] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2490.251] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2490.251] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2490.251] (WW) Disabling Keyboard0
[ 2490.251] (WW) Disabling Mouse0
[ 2490.251] (II) Loader magic: 0x815d80
[ 2490.251] (II) Module ABI versions:
[ 2490.251] X.Org ANSI C Emulation: 0.4
[ 2490.251] X.Org Video Driver: 19.0
[ 2490.251] X.Org XInput driver : 21.0
[ 2490.251] X.Org Server Extension : 9.0
[ 2490.254] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 2490.254] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2490.254] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2490.258] (--) PCI:*(0:1:0:0) 10de:1180:10de:0969 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 2490.258] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2490.258] (II) LoadModule: "glx"
[ 2490.258] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2490.268] (II) Module glx: vendor="NVIDIA Corporation"
[ 2490.268] compiled for 4.0.2, module version = 1.0.0
[ 2490.268] Module class: X.Org Server Extension
[ 2490.268] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 2490.268] (II) LoadModule: "nvidia"
[ 2490.268] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2490.269] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2490.269] compiled for 4.0.2, module version = 1.0.0
[ 2490.269] Module class: X.Org Video Driver
[ 2490.269] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 2490.269] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2490.269] (++) using VT number 1
[ 2490.269] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 2490.269] (II) Loading sub module "fb"
[ 2490.269] (II) LoadModule: "fb"
[ 2490.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2490.269] (II) Module fb: vendor="X.Org Foundation"
[ 2490.269] compiled for 1.17.1, module version = 1.0.0
[ 2490.269] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2490.269] (II) Loading sub module "wfb"
[ 2490.269] (II) LoadModule: "wfb"
[ 2490.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2490.270] (II) Module wfb: vendor="X.Org Foundation"
[ 2490.270] compiled for 1.17.1, module version = 1.0.0
[ 2490.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2490.270] (II) Loading sub module "ramdac"
[ 2490.270] (II) LoadModule: "ramdac"
[ 2490.270] (II) Module "ramdac" already built-in
[ 2490.270] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2490.270] (==) NVIDIA(0): RGB weight 888
[ 2490.270] (==) NVIDIA(0): Default visual is TrueColor
[ 2490.270] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2490.270] (**) NVIDIA(0): Option "Stereo" "0"
[ 2490.270] (**) NVIDIA(0): Option "SLI" "Off"
[ 2490.270] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 2490.270] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 2490.270] (**) NVIDIA(0): Stereo disabled by request
[ 2490.270] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 2490.270] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 2490.271] (**) NVIDIA(0): Option "MetaModes" "DVI-I-1: nvidia-auto-select +1280+0, DVI-D-0: nvidia-auto-select +0+416"
[ 2490.271] (**) NVIDIA(0): Enabling 2D acceleration
[ 2490.690] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 2490.692] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 680 (GK104) at PCI:1:0:0 (GPU-0)
[ 2490.692] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 2490.692] (--) NVIDIA(0): VideoBIOS: 80.04.09.00.01
[ 2490.692] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2490.709] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:1:0:0
[ 2490.709] (--) NVIDIA(0): CRT-0
[ 2490.709] (--) NVIDIA(0): Samsung SMS27A850T (DFP-0) (boot, connected)
[ 2490.709] (--) NVIDIA(0): DFP-1
[ 2490.709] (--) NVIDIA(0): DFP-2
[ 2490.709] (--) NVIDIA(0): Samsung SyncMaster (DFP-3) (connected)
[ 2490.709] (--) NVIDIA(0): DFP-4
[ 2490.709] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): Samsung SMS27A850T (DFP-0): Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): Samsung SMS27A850T (DFP-0): 330.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): Samsung SyncMaster (DFP-3): Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-3): 330.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 2490.710] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 2490.710] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2490.710] (**) NVIDIA(0): device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
[ 2490.710] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2490.710] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2490.710] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2490.710] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 2490.712] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2490.712] (**) NVIDIA(0): device Samsung SyncMaster (DFP-3) (Using EDID frequencies
[ 2490.712] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2490.713] (II) NVIDIA(0): Validated MetaModes:
[ 2490.713] (II) NVIDIA(0):
[ 2490.713] (II) NVIDIA(0): "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
[ 2490.713] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1440
[ 2490.742] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 2490.742] (--) NVIDIA(0): option
[ 2490.742] (--) Depth 24 pixmap format is 32 bpp
[ 2490.743] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 2490.743] (II) NVIDIA: access.
[ 2490.746] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2490.746] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2490.746] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2490.746] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2490.746] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2490.746] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2490.746] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2490.746] (II) NVIDIA(0): Config Options in the README.
[ 2490.761] (II) NVIDIA(0): Setting mode "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
[ 2490.853] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2490.853] (==) NVIDIA(0): Backing store enabled
[ 2490.853] (==) NVIDIA(0): Silken mouse enabled
[ 2490.853] (**) NVIDIA(0): DPMS enabled
[ 2490.853] (II) Loading sub module "dri2"
[ 2490.853] (II) LoadModule: "dri2"
[ 2490.853] (II) Module "dri2" already built-in
[ 2490.853] (II) NVIDIA(0): [DRI2] Setup complete
[ 2490.853] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2490.853] (--) RandR disabled
[ 2490.856] (II) Initializing extension GLX
[ 2490.856] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 2490.914] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2490.914] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 2490.914] (II) LoadModule: "evdev"
[ 2490.914] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2490.914] (II) Module evdev: vendor="X.Org Foundation"
[ 2490.914] compiled for 1.17.1, module version = 2.9.2
[ 2490.914] Module class: X.Org XInput Driver
[ 2490.914] ABI class: X.Org XInput driver, version 21.0
[ 2490.915] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
[ 2490.915] (II) Using input driver 'evdev' for 'Power Button'
[ 2490.915] (**) Power Button: always reports core events
[ 2490.915] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 2490.915] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2490.915] (--) evdev: Power Button: Found keys
[ 2490.915] (II) evdev: Power Button: Configuring as keyboard
[ 2490.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event7"
[ 2490.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2490.915] (**) Option "xkb_rules" "evdev"
[ 2490.915] (**) Option "xkb_model" "pc104"
[ 2490.915] (**) Option "xkb_layout" "us"
[ 2490.915] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.940] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 2490.940] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2490.940] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 2490.941] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
[ 2490.941] (II) Using input driver 'evdev' for 'Power Button'
[ 2490.941] (**) Power Button: always reports core events
[ 2490.941] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 2490.941] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2490.941] (--) evdev: Power Button: Found keys
[ 2490.941] (II) evdev: Power Button: Configuring as keyboard
[ 2490.941] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8/event6"
[ 2490.941] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2490.941] (**) Option "xkb_rules" "evdev"
[ 2490.941] (**) Option "xkb_model" "pc104"
[ 2490.941] (**) Option "xkb_layout" "us"
[ 2490.941] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event20)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event21)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event15)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event16)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.944] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[ 2490.944] (II) No input driver specified, ignoring this device.
[ 2490.944] (II) This device may have been added with another device file.
[ 2490.944] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event0)
[ 2490.944] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
[ 2490.944] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[ 2490.944] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[ 2490.944] (II) Using input driver 'evdev' for 'HID 1017:0002'
[ 2490.944] (**) HID 1017:0002: always reports core events
[ 2490.944] (**) evdev: HID 1017:0002: Device: "/dev/input/event0"
[ 2490.945] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
[ 2490.945] (--) evdev: HID 1017:0002: Found keys
[ 2490.945] (II) evdev: HID 1017:0002: Configuring as keyboard
[ 2490.945] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.0/0003:1017:0002.0001/input/input2/event0"
[ 2490.945] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 8)
[ 2490.945] (**) Option "xkb_rules" "evdev"
[ 2490.945] (**) Option "xkb_model" "pc104"
[ 2490.945] (**) Option "xkb_layout" "us"
[ 2490.945] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.945] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event1)
[ 2490.945] (**) HID 1017:0002: Applying InputClass "evdev pointer catchall"
[ 2490.945] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
[ 2490.945] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[ 2490.946] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[ 2490.946] (II) Using input driver 'evdev' for 'HID 1017:0002'
[ 2490.946] (**) HID 1017:0002: always reports core events
[ 2490.946] (**) evdev: HID 1017:0002: Device: "/dev/input/event1"
[ 2490.946] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
[ 2490.946] (--) evdev: HID 1017:0002: Found 9 mouse buttons
[ 2490.946] (--) evdev: HID 1017:0002: Found scroll wheel(s)
[ 2490.946] (--) evdev: HID 1017:0002: Found relative axes
[ 2490.946] (--) evdev: HID 1017:0002: Found x and y relative axes
[ 2490.946] (--) evdev: HID 1017:0002: Found absolute axes
[ 2490.946] (II) evdev: HID 1017:0002: Forcing absolute x/y axes to exist.
[ 2490.946] (--) evdev: HID 1017:0002: Found keys
[ 2490.946] (II) evdev: HID 1017:0002: Configuring as mouse
[ 2490.946] (II) evdev: HID 1017:0002: Configuring as keyboard
[ 2490.946] (II) evdev: HID 1017:0002: Adding scrollwheel support
[ 2490.946] (**) evdev: HID 1017:0002: YAxisMapping: buttons 4 and 5
[ 2490.946] (**) evdev: HID 1017:0002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.946] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.1/0003:1017:0002.0002/input/input3/event1"
[ 2490.946] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 9)
[ 2490.946] (**) Option "xkb_rules" "evdev"
[ 2490.946] (**) Option "xkb_model" "pc104"
[ 2490.946] (**) Option "xkb_layout" "us"
[ 2490.946] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.946] (II) evdev: HID 1017:0002: initialized for relative axes.
[ 2490.946] (WW) evdev: HID 1017:0002: ignoring absolute axes.
[ 2490.946] (**) HID 1017:0002: (accel) keeping acceleration scheme 1
[ 2490.946] (**) HID 1017:0002: (accel) acceleration profile 0
[ 2490.946] (**) HID 1017:0002: (accel) acceleration factor: 2.000
[ 2490.946] (**) HID 1017:0002: (accel) acceleration threshold: 4
[ 2490.946] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/mouse0)
[ 2490.946] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[ 2490.946] (II) No input driver specified, ignoring this device.
[ 2490.947] (II) This device may have been added with another device file.
[ 2490.947] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event2)
[ 2490.947] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 2490.947] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 34 paused 0
[ 2490.947] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
[ 2490.947] (**) Logitech G9x Laser Mouse: always reports core events
[ 2490.947] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event2"
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found 20 mouse buttons
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found x and y relative axes
[ 2490.947] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
[ 2490.947] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
[ 2490.947] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
[ 2490.947] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.947] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:046D:C066.0003/input/input4/event2"
[ 2490.947] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: MOUSE, id 10)
[ 2490.947] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
[ 2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/mouse1)
[ 2490.948] (II) No input driver specified, ignoring this device.
[ 2490.948] (II) This device may have been added with another device file.
[ 2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event3)
[ 2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev keyboard catchall"
[ 2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "Keyboard Defaults"
[ 2490.949] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 35 paused 0
[ 2490.949] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
[ 2490.949] (**) Logitech G9x Laser Mouse: always reports core events
[ 2490.949] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event3"
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found 1 mouse buttons
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing relative x/y axes to exist.
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found absolute axes
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing absolute x/y axes to exist.
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found keys
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as keyboard
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
[ 2490.949] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
[ 2490.949] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.1/0003:046D:C066.0004/input/input5/event3"
[ 2490.949] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: KEYBOARD, id 11)
[ 2490.949] (**) Option "xkb_rules" "evdev"
[ 2490.949] (**) Option "xkb_model" "pc104"
[ 2490.949] (**) Option "xkb_layout" "us"
[ 2490.949] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
[ 2490.949] (WW) evdev: Logitech G9x Laser Mouse: ignoring absolute axes.
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
[ 2490.949] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4)
[ 2490.949] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2490.949] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
[ 2490.950] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[ 2490.950] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 2490.950] (**) USB Keyboard: always reports core events
[ 2490.950] (**) evdev: USB Keyboard: Device: "/dev/input/event4"
[ 2490.950] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
[ 2490.950] (--) evdev: USB Keyboard: Found keys
[ 2490.950] (II) evdev: USB Keyboard: Configuring as keyboard
[ 2490.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:04D9:0274.0005/input/input6/event4"
[ 2490.950] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 12)
[ 2490.950] (**) Option "xkb_rules" "evdev"
[ 2490.950] (**) Option "xkb_model" "pc104"
[ 2490.950] (**) Option "xkb_layout" "us"
[ 2490.950] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.951] (II) config/udev: Adding input device USB Keyboard (/dev/input/event5)
[ 2490.951] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2490.951] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
[ 2490.951] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 37 paused 0
[ 2490.951] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 2490.951] (**) USB Keyboard: always reports core events
[ 2490.951] (**) evdev: USB Keyboard: Device: "/dev/input/event5"
[ 2490.951] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
[ 2490.951] (--) evdev: USB Keyboard: Found 1 mouse buttons
[ 2490.951] (--) evdev: USB Keyboard: Found scroll wheel(s)
[ 2490.951] (--) evdev: USB Keyboard: Found relative axes
[ 2490.951] (II) evdev: USB Keyboard: Forcing relative x/y axes to exist.
[ 2490.951] (--) evdev: USB Keyboard: Found absolute axes
[ 2490.951] (II) evdev: USB Keyboard: Forcing absolute x/y axes to exist.
[ 2490.951] (--) evdev: USB Keyboard: Found keys
[ 2490.951] (II) evdev: USB Keyboard: Configuring as mouse
[ 2490.951] (II) evdev: USB Keyboard: Configuring as keyboard
[ 2490.951] (II) evdev: USB Keyboard: Adding scrollwheel support
[ 2490.951] (**) evdev: USB Keyboard: YAxisMapping: buttons 4 and 5
[ 2490.951] (**) evdev: USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.951] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.1/0003:04D9:0274.0006/input/input7/event5"
[ 2490.951] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 13)
[ 2490.951] (**) Option "xkb_rules" "evdev"
[ 2490.951] (**) Option "xkb_model" "pc104"
[ 2490.951] (**) Option "xkb_layout" "us"
[ 2490.951] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.952] (II) evdev: USB Keyboard: initialized for relative axes.
[ 2490.952] (WW) evdev: USB Keyboard: ignoring absolute axes.
[ 2490.952] (**) USB Keyboard: (accel) keeping acceleration scheme 1
[ 2490.952] (**) USB Keyboard: (accel) acceleration profile 0
[ 2490.952] (**) USB Keyboard: (accel) acceleration factor: 2.000
[ 2490.952] (**) USB Keyboard: (accel) acceleration threshold: 4
[ 2490.952] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
[ 2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "Keyboard Defaults"
[ 2490.952] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 38 paused 0
[ 2490.952] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 2490.952] (**) Eee PC WMI hotkeys: always reports core events
[ 2490.952] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event9"
[ 2490.953] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 2490.953] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 2490.953] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 2490.953] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input12/event9"
[ 2490.953] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[ 2490.953] (**) Option "xkb_rules" "evdev"
[ 2490.953] (**) Option "xkb_model" "pc104"
[ 2490.953] (**) Option "xkb_layout" "us"
[ 2490.953] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.953] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 2490.953] (II) No input driver specified, ignoring this device.
[ 2490.953] (II) This device may have been added with another device file.
[ 2491.022] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2491.022] (**) NVIDIA(0): device Samsung SyncMaster (DFP-3) (Using EDID frequencies
[ 2491.022] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2491.034] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2491.034] (**) NVIDIA(0): device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
[ 2491.034] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2491.034] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2491.034] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2491.034] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
Last edited by H3g3m0n (2015-04-01 00:11:52)

WonderWoofy wrote:I'm not sure about your VT issue, but if you set the 'terminate:ctrl_alt_bksp' option with setxkbmap or loginctl, does it work then?
I tried setxkbmap before without success.
Also tried:
localectl set-x11-keymap "us" "" "" "terminate:ctrl_alt_bksp"
Not sure how to go about using loginctl to do the same thing.
Last edited by H3g3m0n (2015-04-01 03:25:35)

Similar Messages

  • Opensource ATI can't switch video modes with CTRL+ALT+plus/minus

    Hi,
    I've updated my system to the new xorg-server and video driver.
    The new video driver (xf86-video-ati-6.7.195-1) can't switch video modes with the CTRL+ALT+plus/minus key combination. I use this key combination a lot and before I upgraded to the new driver this worked :-(
    Anybody else having this problem?
    I know I can use xrandr to change the video mode, but it doesn't exactly do what I want. Xrandr changes the video mode, but also changes the resolution of the screen, while CTRL+ALT+plus/minus keeps the resolution intact (the screensize is bigger than what is seen on the monitor, you can scroll the screen by moving the mouse "out" of the monitor)
    Is there a fix/patch that I can try?

    It looks like this is the result of the new opensource ati drivers use the new xrandr.
    One of the changes is that it will treat the screen section in xorg.conf differently. Browsing through video modes, using the CTRL+ALT+plus/minus key combination, that are defined in the screen section in xorg.conf is not possible anymore.

  • Can't switch to console with ctrl+alt+f? anymore

    i installed the lastest xorg packages and i am using fluxbox-cvs and i can't switch to console with ctrl+alt+f? anymore - any ideas?

    no, but i did have to make that switch from keyboard to kbd to satisfy the new xorg config...i'll try all that but i am away from my box at the mo
    thanks for the on topic post
    (as much as i would like to flame oscar about his/her choice of wm...i can't be f*cked.  aside from the slit hang problem i have not seen a bug in cvs that has remained for any significant time at all.  besides, it's pre 1.0, it's allowed to be buggy)
    .:after thought:.
    fluxbox = overgrown bug
    kde and gnome = overgrown
    .:after after thought:.
    i see you are a gnome user, how ironic you are,                 
    ah...flame war! 

  • How can I switch my membership with CS6 to Premier Pro CC?

    How can I switch my monthly
    membership with CS6 to Premier Pro CC? I am attempting to load a trial and it doesn't download.

    This is a user to user forum, not Adobe support... you most likely need Adobe help
    Adobe contact information - http://helpx.adobe.com/contact.html
    Help for Download & Install & Setup & Activation http://forums.adobe.com/community/download_install_setup
    Next link has a "Chat Now" button near the bottom http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • Can't switch virtual consoles with Ctrl-Alt-Fn [SOLVED]

    Pretty much exactly what is says in the title. I recently reformatted this machine, and everything seems to be working relatively okay, but for some reason Ctr-Alt-Fn simply doesn't do anything. I can't access my other virtual consoles, it's rather frustrating, and I have no idea how to proceed.
    Any help would be much appreciated.
    Last edited by alex404 (2012-08-17 10:07:40)

    Okay, I didn't realize that chvt is the program that I want to run, so that's super helpful.
    When I first tried to run that I got some error about not being able to read in file, and so I ran it as root and it worked fine.
    So I added myself to the tty group, and now I get this error: chvt: VT_ACTIVATE: Operation not permitted
    Interestingly, I only get this when I run it from a terminal emulator in X11. When I run it while still in the console just after boot, chvt works fine. Now I'm rather stuck again...

  • Can't switch virtual terminals with NVidia binary driver

    I got a new laptop, with an NVidia 9800M card, put Arch64 on it, and put the nvidia driver on it.  Right now, I'm using the default nvidia-xconfig --composite configuration, and X itself is working great.  However, upon switching VTs with Ctrl+Alt+F1, I get just a black screen, with not even the backlight.  I can, however, blindly type commands, and switching back to X with Alt+F7 works.  Googling around, it seems that it is a known problem, and that somehow the driver is setting the display to an invalid video mode upon switching VTs.  I tried a few proposed solutions, including adding different video= options to the kernel, and nothing has helped.  What, if any, is the solution?  Thanks.
    Last edited by tavianator (2008-09-04 15:53:09)

    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 1.0  (buildmeister@builder57)  Wed Jul  2 12:30:48 PDT 2008
    Section "ServerLayout"
        Identifier     "Layout0"
        Screen      0  "Screen0"
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
    EndSection
    Section "Files"
        RgbPath         "/usr/lib/X11/rgb"
    EndSection
    Section "Module"
        Load           "dbe"
        Load           "extmod"
        Load           "freetype"
        Load           "glx"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Keyboard0"
        Driver         "keyboard"
    EndSection
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "Unknown"
        HorizSync       30.0 - 110.0
        VertRefresh     50.0 - 150.0
        Option         "DPMS"
    EndSection
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
    EndSection
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
        SubSection     "Display"
            Depth       24
            Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection
    EndSection

  • Can I switch my G3 with my husbands new G3s???

    I am not eligible for an upgrade to a G3s until 2010. My husband is eligible now and we have purchased the new G3s due June 19th. I am the tech person of the family he is not. He has the original iphone. My question is can I give him my current G3 phone and take his G3s when it comes in. I want the new G3s all he wants is a G3 ( doesn't care much about the new features of the G3s). Would it be as simple as changing SIm cards or taking it to a AT&T store? I just want to switch phones. Thanks

    I have the family plan as well. I have the 3g (not eligible for the subsidized upgrade) while my husband has the original iPhone (eligible for the subsidized upgrade).
    I want the 3GS, my husband could care less if he has the original or the 3g. SOOOO, I will be purchasing the 3gs under my husband's line (which again, is eligible for the subsidized upgrade). I will then have AT&T switch the phone numbers so that my phone number is attached to the 3gs while my husband's phone number is then attached to the 3g. I've done it before with no issue, but still checked with AT&T to make sure that I could do that again once I get the 3gs. They said it can absolutely be done, no problem.
    Hopefully, that wasn't too confusing and was of some help to you.
    iPhoNettie

  • Can I switch SIM cards with my wife's iPhone?

    I purchased a 32GB iPhone 4 and would like to use it without a case.  But, and this just might be my imagination, when holding the iPhone, the edges of the back feel kind of sharp.  The glass sits just slightly lower than the edge and I would imagine that's why.  Just a cosmetic problem and nothing to get too riled up about at an Apple Store or to Apple Care.
    I will likely be buying a second phone for my wife soon and it occurred to me that she will always have her phone in a case, so she could care less about the sharpness.
    Is it possible to switch the SIM cards on our phones when she gets hers and I'll use the one without the sharp edge?  How is that physically done?  Do I just make a backup if it after hers is activated, switch the cards, and then restore both of them from the appropriate backup?  We have Mobile Me and share email, calendar, bookmarks, etc. So besides for the media we basically have the same phone except for the phone numbers.

    Yes, as long as they are both iPhone 4's using the micro sim, switching the sim card should work fine. If you are having problems with that, you can always call AT&T

  • Cannot switch to tty with CTRL+ALT+F?

    Hi everybody,
    I'm sitting in front of a fresh archlinux installation with kdemod installed. I notice that I can't switch to the terminals with CTRL+ALT+F?. I always used this kind of switching without configuring anything, so what could have gone wrong?
    Thanks for any suggestions...
    EDIT: by accident I wrote the german "STRG" instead of "CTRL"
    Last edited by Kei (2007-07-09 16:40:00)

    i've got the same problem here
    I can kill sessions via CTRL+ALT+BKSP and navigate from vt1 to vt2 etc.., but not from X to any other terminals!
    Global shortcuts don't seem to work either, might be a related problem!?
    Output from xev for CTRL, ALT, F1
    KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
    root 0x4c, subw 0x0, time 1772087, (-158,305), root:(878,360),
    state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False
    KeyPress event, serial 31, synthetic NO, window 0x2c00001,
    root 0x4c, subw 0x0, time 1774643, (-158,305), root:(878,360),
    state 0x0, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
    XLookupString gives 0 bytes:
    XmbLookupString gives 0 bytes:
    XFilterEvent returns: False
    KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
    root 0x4c, subw 0x0, time 1774702, (-158,305), root:(878,360),
    state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False
    KeyPress event, serial 31, synthetic NO, window 0x2c00001,
    root 0x4c, subw 0x0, time 1776252, (-158,305), root:(878,360),
    state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
    XLookupString gives 0 bytes:
    XmbLookupString gives 0 bytes:
    XFilterEvent returns: False
    KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
    root 0x4c, subw 0x0, time 1776307, (-158,305), root:(878,360),
    state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False
    KeyPress event, serial 31, synthetic NO, window 0x2c00001,
    root 0x4c, subw 0x0, time 1776962, (-158,305), root:(878,360),
    state 0x0, keycode 67 (keysym 0xffbe, F1), same_screen YES,
    XLookupString gives 0 bytes:
    XmbLookupString gives 0 bytes:
    XFilterEvent returns: False
    KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
    root 0x4c, subw 0x0, time 1777014, (-158,305), root:(878,360),
    state 0x0, keycode 67 (keysym 0xffbe, F1), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False
    and my xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "dri"
    Load "dbe"
    Load "record"
    Load "xtrap"
    Load "freetype"
    Load "type1"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "uk"
    Option "XkbOptions" "grp:ctrl_shift_toggle"
    Option "XkbVariant" "nodeadkeys"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 330 210 # mm
    Identifier "Monitor0"
    VendorName "SHP"
    ModelName "139f"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "radeon"
    Option "AGPMode" "8"
    Option "EnablePageFlip" "1"
    Option "ColorTiling" "1"
    Option "UseFastTLS" "2"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon R250 [Mobility FireGL 9000]"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "ServerFlags"
    Option "DontVTSwitch" "False"
    Option "DontZap" "False"
    EndSection

  • My fiance logged onto my iphone with his apple ID and now I can't switch it back to my username. How can I change it back to mine? ( but when I go to setting,icloud my un/pw are there)

    My fiance logged into my iphone with his apple ID and now I can't switch it back to my username. When I go to buy an app his username is in an editable format to beable to change it back to mine. How can I change it back to mine? (when I go to setting,icloud my un/pw are there) Can someone please help? Thanks!

    Had you looked in the User Guide, you would have found this:  Settings>Store.  Tap on AppleID to change.

  • I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

    I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings?  I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

    1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
    As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
    2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
    You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
    ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
    3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
    Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

  • Can I switch my Apple ID on the same device and purchase software with my other ID that has a different credit card (or iTunes redeemed points) and then switch back to another user ID?

    I have an iPad with an ID that is associated with 1 credit card but I don't wan't to use that credit card to make puchases.  Can I switch to a different user ID and make puchases on a different credit card and/or iTunes redeemed points and then switch back to my original ID (before the 90 days wait period us up)?

    If changing your password does not solve then contact itunes support.
    Click Support at the top of this page, then click the link under Contact Apple Support

  • Can I assign an easier keyboard shortcut to Export than ctrl+shift+alt+E ?

    Can I do this?

    Keith_Reeder wrote:
    That keystroke is "Export with Previous" - Export is "only" Ctrl+Shift+E.
    Yes you're right but it's not what I do, once I've set up the quality and the output folder I just want to work on a file, get it right and export it then move on to the next
    Is there no way of altering or adding a different shortcut? The Ctrl+Shift+E still requires another step which is incongrous and for me requires two hands!

  • I am on a plan with a basic phone that is breaking. I was given a smartphone that belonged to a relative that is now deceased, (they used the phone since they have passed it is deactivated.) how can I switch my phone over and is there anyway to avoid a da

    I am on a plan with a basic phone that is breaking. I was given a smartphone that belonged to a relative that is now deceased, (they used the phone since they have passed it is deactivated.) how can I switch my phone over and is there anyway to avoid a data package/plan?

    What is your current plan?  In some cases it can be cheaper to move to a More Everything plan with an out of contract line. With More Everything, you will get a $15 per month reduction in line fee with a minimal data. 

  • Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP mod end can't switch to RP to start download the IOS using Xmodem, though it shouldn't work in ROMmon SP omde but the xmodem is not gving the

    Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP modw and I can't switch to RP to start download the IOS using Xmodem, though Xmodem shouldn't work in ROMmon SP mode but the it's not gving the
    not executable message, the slot0: and disk0: are not accessable can't see the files inside, when I try the dir slot0: or dir disk0: it says it can't be opened and when I try to boot from them there's noting as well, what can I do to load an IOS image to the booflash: or slot0: ,each time I load the image using Xmodem at the end it gives me *** System received a Software forced crash ***
    signal=0x17, code=0x5, context=0x0
    When I run the command:
    rommom1> boot bootflash:
    boot: cannot determine first file name on deice "bootflash:"
    rommon2> boot slot0:
    boot: cannot open "slot0:"
    boot: cannot dtermine first file name on device "slot0:"
    BTW  System Bootstrap, version 7.1
    I''m looking to format the PCMCIA using a PC and format it to FAT16 and copy the boot image into it and then try to load from the PCMCIA afterward if it works I'll format it using the Supervisor engine 2.
    Any one have another new idea I can use, thanks in advance

    This is a potentially complex issue.
    Is this SUP configured to run as IOS native or CatOS Hybrid?
    While in ROMMON can you do the 'dev' command and see whad drives are recognized. Then 'dir' the drives that the SUP recognizes.
    Can you provide the screen captures as it boots?
    You would be bette served by hacing a TAC case.

Maybe you are looking for

  • (Urgent) Where can find the code and documentations for ATG mobile  ?

    Hi there, We have a customer (Gome) which is implementing ATG products and ATG solution needs to support iPhone app as well. Due to the tight schedule, we are looking to have some reference modules to jump start our mobile module development and help

  • 500 Wrong channel adapter type

    Dear Experts,          I am having the requirment wherein we need to pass the Messages between 2 PI systems using XI Adapter. The Scenario is as follows:         We want to implement MLS to be used between our partner systems. therefore we are using

  • Exception while loading properties from an xml file

    Hi all, I've got a problem while loading properties from an XML file: java.lang.ClassCastException: org.apache.xerces.dom.DeferredCommentImpl cannot be cast to org.w3c.dom.Element ERROR - Cannot load properties from the specified file <./conf/login.p

  • Format a cell / british pound

    Hello Community, I'm using Numbers '09 V2.3 (german) and I'm writing an invoice in £ to a british company. I can set the currency to Sterling, but I can't force the numbers to be written the british way. In german writing you use only a "," where in

  • I have a canadian account and want to create a US account.  it won't let me.  can i?

    I have a Canadian account and am trying to create a US account.  As soon as i get to the page of payment option and fill it out it doesn't go through and won't explain why not.  Can i not have two accounts?