Can't sync from iTunes to iPhone, get 'iTunes has stopped working' message

2 messages appear when I try to sync music (have tried a few times over the last few weeks and still having the same issue). I have no music now on my iPhone! I reverted to factory settings (as advised) then started again. Everything worked ok apart from the music.. which hasn't synced.
I upgraded to the newest version (4:2)but I still don't have music and I am still getting the error messages

In Itunes c on your pc can you see the song. Right mouse click and see if it has the option to check item. If so select it. iTunes will not synch unchecked music as part of a playlist.
Sometimes useful to look in the Songs viw in Music as you can add the checked column from View, View Options

Similar Messages

  • Why am I continually getting "Firefox has stopped working" messages?

    Seems like constantly, several times a day, I receive the message "Firefox has stopped working" and that Microsoft or Windows is searching for the problem, and then it shuts down. When I open Firefox again, it takes me right back where I left off, with another open window. Also, since running an update a week or so ago, every time I click to open another site I get hit with the "Do you want Mozilla to allow this change?" That didn't happen before. Both are very annoying. I also lost my RoboForm toolbar unless I juggle back and forth the "Full Page" setting after dropping down the open menu bars. I am not, by any means, a computer whiz, so most of the help FAQs are written above my knowledge of computers level. Now when I just clicked "Automatically add" Troubleshooting info, at the bottom of this page, I got a pop up that said " Firefox prevented this site from asking you to install software on this computer". Now I'm really lost! I don't want to reset back to Default because I'll never get back the settings I currently have.

    Regarding the message about allowing a change, is there more information about what the change is?
    You have quite a few plugins, and they might not all be necessary. To minimize the influence of add-ons while you're troubleshooting this problem, I suggest the following.
    Open the Add-ons page using either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Plugins.
    * Set unrecognized or rarely used plugins to "Never Activate"
    * Consider setting "player" type plugins such as QuickTime, Silverlight, and Shockwave Flash to "Ask to Activate" so that sites cannot run them automatically. As you discover sites you want to allow to run the player every time, you can click the notification icon in the address bar (looks like a small Lego block) and give permission there.
    In the left column, click Extensions.
    * Remove unrecognized extensions, or disable them
    * Disable rarely used extensions (for example, you don't use it daily)
    Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Hopefully this will help keep Firefox more stable.

  • Since upgrading to 4.0, get "Firefox has stopped working" message constantly.

    Just upgraded to 4.o yesterday and now it constantly crashes. I can navigate no more than 2-3 pages before I get the message "Firefox has stopped working" and the session shuts down. How can I go back to a previous version of Firefox? Or do I just revert back to using IE, which works fine?

    Did you try to disable plugins as well?
    *https://support.mozilla.org/kb/Troubleshooting+plugins
    If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open the crash reports page via "Help > Troubleshooting Information".
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

  • Keep getting Skype has stopped working message

    This started last night (2/13/12) .. I keep getting a message saying Skype is not working. I have tried everything I can find online! I have uninstalled and reinstalled it several times .. it wont uninstall in safe mode .. I have tried the (run - %appdata%\skype) and that didn't work .. I looked in my event viewer and found this code ( http:// schemas.microsoft.com/win/2004/08/events… ) but still have not been able to figure out how to fix this issue .. I signed on with another computer to my account so I know its working .. any thoughts?? Please help

    Im having the same problem and i have tried all of the same things that you have nothing in the forums has seemed to work. My skype stopped working 3/11/12 looks like yours hasnt worked for alot longer. Have you ben able to find a solution yet?

  • Untill today FF has been great now when starting get firefox has stopped working message

    Windows 7 pro. HP Pavilion D3 laptop 4 gb Ram. All was good up until this morning and then FF will not open just get below error. Have uninstalled and reinstalled no joy

    Please make sure of the following:
    *All windows updates are up to date:
    *[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    *[https://www.mozilla.org/en-US/plugincheck/ Update any outdated plugins]
    *Try a new profile: [[Use the Profile Manager to create and remove Firefox profiles]]

  • I can't sync or conect my iphone 5s, Itunes doesn't see it

    I can't sync or conect my iphone 5s, Itunes doesn't see it

    Hello Mparada,
    Thank you for usingApple Support Communities.
    Depending on which operating system is on your computer, one of these two articles should help you sort out what is going on.
    iOS: Device not recognized in iTunes for OS X - Apple Support
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Regards,
    Jeff D. 

  • After upgrading, I am getting the dreaded "iTunes has stopped working" message.  I've followed all of the troubleshooting tips on the forum without success.  Fortunately, it works on my other computers.  Running Win7 pro.

    After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch.  I've tried the troubleshooting tips on the Forum without success (though most are pretty old...).  Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep.  Anybody else with this issue??

    My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
    My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
    Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
    thanks!
    Kathi

  • "itunes has stopped working" message when syching iphone

    Need help..
    Ever since I installed the update for the apple software on my PC, when I try to sync my iphone 4 on the last step of synching I get a window popping up saying that "itunes has stopped working". Then I get prompted to close the programme.
    I run Windows 7, and cannot understand why it does this.
    If anyone can help, I would greatly appreciate it.

    Not sure what you've seen/tried so far, so I'll run you through my standard advice as of this morning, Marty.
    There's a bug with 10.1.0.54, Amanda, that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
    Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
    (1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
    (2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
    (3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
    (3 and 4 do help with the device-syncing variation.)

  • HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
    If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

  • Getting itunes has stopped working message after downloading to Windows 8.1

    Getting ITunes has stopped working message after 10 seconds after downloading to Windows 8.1

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • Trying to play amovie just downloaded. Keep getting "Itunes has stopped working" message.

    Trying to play a movie just downloaded. Keep getting "I tunes has stopped working" message. Any suggestions for fixing this?

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • I get a "Palm desktop by access applicatio​n has stopped working" message when switching to the Month calendar view.

    I have a Z22 and am running Access version 6.2.2 on a PC with Vista.
    When I move from Day, Week or Year to Monthly view in the Calendar, I get the "Palm Desktop by Access Application has stopped working" (and then the Windows message saying they are checking for a solution, which they never seem to find).
    Does any one know 1) how to fix this and 2) what is the cause ?  Am I running old software which I need to update ?
    Thanks.
    Post relates to: Palm Z22

    Thank you, aeisha_anis for the steps to correct this problem.  I verified that I must have corrupted calendar data as the PALM Desktop does come up and work when I follow your first 4 steps and remove the data from it.  I can't, however, get through the importing step at the end of your instructions.  I've tried a few times and am afraid I may have messed up the data file as it now is only showing a datebook. mdb and a datebook.bak file under the DateBook folder I copied to my desktop, but no datebook.dab folder as it was showing before and I never did find the datebook.dat file you mentioned.  I still have all of my current calendar data on my Palm Centro but I can't get it to sync with the Palm Desktop without getting the "Palm Desktop by ACCESS Application has stopped working" message.  Do you have any ideas on how to fix this problem?  Thanks much!

  • One solution for 'iTunes has stopped working' message

    This worked in my case for iTunes 10.5 on a Dell Inspiron 1525 running 32-bit Vista. Symptoms started after I had to re-install it. Suddenly, whenever I tried to dl anything from the store, the dl would hit 100%, then I'd get the error message and DEP would then shut down the program. Upon re-starting, the dl wouldn't be in my apps list. (However, the actual dl WAS in my iTunes folder -- it's just that iTunes couldn't 'see' it.)
    I followed all all -- and I mean ALL -- the Apple guides over the course of 2 days with no success, even after numerous re-installs. Also tried every obsure suggestion I came across in the forums here -- and there were a lot!
    What finally worked for me were the suggestions at this link:
    http://www.vistax64.com/tutorials/87249-unable-install-latest-version-program-vi sta.html
    Following the suggestions there, I discovered uninstalled 'debris' residing in the App Data\Local and App Data\Roaming folders, specifically two Apple folders with content. I manually deleted these. These locations aren't mentioned in the Apple guide to manually uninstalling your iTunes. (http://support.apple.com/kb/ht1923)
    I also discovered debris throughout the registry which I removed manually with regedit. (Make backups of your registry before you go rummaging around in there! The usual warnings apply...)
    I also found two Quicktime files residing in the main Windows directory. (Ver 10.5 no longer installs Quicktime and I had un-installed my previous versions) I don't think these made a difference but 'off with their heads' anyway.  (^-~)
    BTW, all of this occurs after I used Revo Uninstaller in moderate mode. So even it didn't catch all the leftover debris. (I'm not brave enough to try it on a more aggressive setting...)
    Thought I pass this on in hopes it saves someone some grief....

    iTunes has stopped working message after having it open for one minute.
    I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142.  After reading tons of probelms online about version 10.5
    I have decided to do nothing for now.  Seems people are putting hours into trying to fix it.  I was going to uninstall and reinstall but seems that isn;t working for to many people.
    How do we get some help from apple? 
    Anyone have any answers???  APPLE HELP please!!!!!!!!!!!!!!!

  • ITunes has stopped working message after having it open for one minute.

    It's fully updated to iOS 5 and was working fine until now. Running on Windows 7 and worked flawlessly till this point. Any tips? I already uninstalled and reinstalled. Only security software I run is Microdoft Security Essesntials and that has never been an issue. At a loss here.

    iTunes has stopped working message after having it open for one minute.
    I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142.  After reading tons of probelms online about version 10.5
    I have decided to do nothing for now.  Seems people are putting hours into trying to fix it.  I was going to uninstall and reinstall but seems that isn;t working for to many people.
    How do we get some help from apple? 
    Anyone have any answers???  APPLE HELP please!!!!!!!!!!!!!!!

  • The top row of my iPhone 3GS keyboard has stopped working.

    The top row of my iPhone 3GS keyboard has stopped working. I've already done a soft reset, hard reset, and restored it to a new device. What else can I do?

    When you are using other applications, or just on the home screen, does that area of the screen respond to touch?
    Steps to resolve issue (I understand you have done what you have but it's always good to try again):
    Clean the iPhone screen with the cleaning cloth that came in the box with the iPhone.
    Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
    If you have a protective plastic sheet or film on the touchscreen, try removing it because it may be preventing the touchscreen from working properly.
    The current application may not be responding (frozen), press and hold the Home button below the screen for a least six seconds, until the application you were using quits.
    If that doesn't work, turn the iPhone off and turn it on again. Press and hold the Sleep/Wake button on the top of the iPhone for few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    If that doesn't work, reset the iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation and replacement, if necessary, even if your iPhone is out of warranty. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the iPhone Service FAQ.
    Tip: If you are going to take your iPhone into a Apple Retail Store for evaluation, follow these steps to help the Mac Genius understand where your touch screen is experiencing unresponsiveness.
    Open the basic calculator application to test all but the top row of the screen. Press each button on the calculator and verify activity.
    To test the area at the top of the screen, rotate the iPhone to change to the scientific calculator and press all the buttons in the left two rows. (An original iPhone must have iPhone 2.0 software installed to access the scientific calculator feature.)
    To test the touchscreen function at the top of the screen of an original iPhone without the iPhone 2.0 software, press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. If the slider does slide, press and hold the Sleep/Wake button until the Apple logo appears to turn iPhone on again.

  • I get the "firefox has stopped working" message after closing browser

    Hello.
    My problem is that when I close the FireFox browser I get the "FireFox has stopped working" message. It's pretty annoying. I've read some other posts here that described a similar problem and have tried some of the suggestions in them including:
    A clean install, a browser reset, running in safe mode, unchecking hardware acceleration, disabling extentions and plugins one at a time, uninstalling my antivirus (avast), rolling back to version 23.01 and checking run in compatibility mode that someone claimed helped them. None of this was effective.
    It seems like after a computer restart the browser will be ok for 2-4 closings and then it will start with the message on every closing. Also, after I uninstalled avast it was good for 6 closings. Rolling back also gave me about 6 message free closings. But then the messages start and doesn't stop.
    Is there anything else I can try? Thanks in advance for any suggestions.

    One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
    If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

Maybe you are looking for

  • Wireless Printer Problem

    In my office we have a HP LaserJet Pro 300 MFP M375nw Printer. We recently moved offices and now no one in the office is able to print wirelessly. The printer will only work when connected with the USB. The printer is connected to the same Wifi as al

  • Addition of new field in VA02 and VA01 in additional data tab B

    Hi, I have added a new field called delivery date to additional data tab B in both tcodes va01 and va02. Now, while creating or changing a sales order, if the Sales group is I00 then this field should be filled up mandatorily. For va01 and va02 i hav

  • Issue in elementary search help.

    Hi, Facing some issue on Attaching search help directly to the screen Fields. I have a requirement that 1> Based on a screen field, I have to filter F4 for the other fields. 2> I have to populate 2 screen elements at the same time. Like: In my transa

  • Dual Boot iOS 7 and iOS 8.0.2 on iPad Mini?

    Hi all, I have an iPad mini 1st gen (non retina) and am an Apple Developer. In my opinion, iOS 7 was the best OS I have ever had on my iPad, but since I upgrade to iOS 8 the device has been extremely laggy. I have considered reverting back to iOS 7,

  • Writing and reading data from a form

    I am trying to write a save and load feature for an application using mostly Jtextboxes and things. Basically I have a form that the user enters data into. I want to be able to save this data and load this data. I am relatively new to working on a GU