Can't Synch.."disk can not be read from or written to"

Hellppp...trying to get daughter's IPOD Nano to synch. It's a 3rd gen video (squarish model).
We start the log-in try to synch...it reads for a moment then says "the disk cannot be read from or written to". We can all her songs in the new library we created..uploaded from the Nano...next she buys 5 songs and can't synch back down to nano.
We've tried full resets, new iD's at the I-store, recognizing "new hardware on this laptop" etc. Could the nano be shot? Plays fine and loads her brothers songs fine but won't accept new songs she bought in her own store?
Help..

Hey there,
And Welcome to Apple Discussions.
Have you had a chance to look at this Apple support document relating to this exact issue? If not, I would check it out. Make sure to work through each troubleshooting solution one at a time. Could be of help.
[Disk cannot be read from or written to when syncing iPod or Firmware update failure error when updating or restoring iPod|http://support.apple.com/kb/HT1207]
Otherwise, I would try completely formatting the iPod through Windows and then restoring it through iTunes. Instructions on how to do this can be found below. Its worth a shot.
[Erase Your iPod - The Super Fix for Most iPod Problems|http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml]
Hope this helps.
B-rock

Similar Messages

  • Can't sync to iPod: The disk could not be read from or written to.

    I recently installed a new operating system (Windows XP with service pack 2), and then downloaded the latest version of iTunes. The next time I hooked up my iPod (3rd gen.)to sync it, iTunes removed all of the music that I'd purchased on iTunes, and i was unable to sync it back on. Then every time I opened iTunes to try again, my computer would freeze (but only when on iTunes). I used the restore function to restore factory settings, so now there is nothing at all on my iPod and when I try to sync, it gives the above message (The iPod cannot by synced. The disk could not be read from or written to). Any suggestions for how I can fix this problem?
    Thanks!

    Have you had a chance to look at this troubleshooting page? It may be of some help: "Disk cannot be read from or written to" when syncing iPod

  • The disk can not be read from or written to?

    When I try and update my Ipod, it gives me this message 'The disk can not be read from or written to' And its really getting on my nerves, How do I fix it so I can actully put music on my Ipod?
    VulCAN   Windows XP   none

    This link should help you troubleshoot your error.
    http://docs.info.apple.com/article.html?artnum=301267

  • Can't Sync New Nano: "The disk could not be read from or written to."

    I just got a new nano for Christmas, but can't seem to sync it with iTunes. I updated all the software, reset, restarted, restored, and all the rest, but it still gives me the same error whenever I try to sync it:
    "Attempting to copy to the disk "{Ipod's Name}" failed. The disk could not be read from or written to."
    If I change the settings so it's not downloading anything it doesn't complain, but as soon as I select any artist or album to actually sync, it gives that error.
    There's also one specific file that gives a different error message (in addition to this one)--it tells me that the file wasn't copied because the iPod can't play it. I tried looking for someone with the same problem, but all the ones that I found were talking about this happening to videos, and this is just a straight audio mp3.

    Just doublechecking. In the course of your troubleshooting to date, have you worked through the following document?
    ["Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod|http://support.apple.com/kb/HT1207]

  • How can i fix this for my iPhone4? "attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to. "

    i keep gettign this message when trying to drag music in itunes.
    attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to.

    Can apply to iPhone as well >    'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    If you are using a Windows based computer >  iTunes for Windows: Gathering and using iTunes Diagnostics
    Ignore:  To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.

  • The iPod can not be synced. The disk could not be read from or written to.

    I try several time to send my song list from libraly to iPod. But it's show me that " The iPod can not be synced. The disk could not be read from or written to. "
    About this problem i try to do manythings follow some reply for advice me. but i still got problem. and i try to check something in my PC and found something wrong. i go to properties of disk drive and go to hard ware that show me all hard drive i have include Apple iPod USB Device. i go to properties for check it and see
    Device status :
    No driver are installed for this device
    Device usage :
    Use this device (enable)
    i'm not sure that because of this problem? if yes, how to do? because i do manythings such as use 5 R's and program reset utility. But i still got this problem. Help me plz.

    Sorry to see your having these issues Jihant. Posted below I have some links that may assist you with your troubleshooting steps.
    One of the first things you may want to look at is
    1. Download and Install latest iTunes Software. You should have iTunes 7.2
    2. You stated earlier you did the 5 Rs. So you have done a Reset and Restore. I would give it one more shot after you upgraded iTunes as needed.
    If this still does not resolve the issue. Try copying songs over 1 at a time. Do not copy over a playlist. Then try a new play list all together. Create a new playlist.
    You can also take a CD you may have and put import songs into iTunes then see if those songs will copy over.
    You may also create a new user and open up iTunes in a new user and import a cd with some songs and see if the same issue occurs.
    You can also try
    http://docs.info.apple.com/article.html?artnum=305136
    And if this still does not work for you. You may want to try another computer.
    or if the above article does not resolve the issue
    http://docs.info.apple.com/article.html?artnum=93976
    If this still occurs please call Apple for further assistance
    1-800-275-2273

  • Disk can not be read from or written to

    This iPod nano second gen is brand new. Bought it today and I put like 10 songs and 10 photos on for my sister and now it's saying "disk can not be read from or written to" and now it's not showing up in iTunes or "My Computer". Help, please?

    Is there an error number listed in the message? This would be helpful. You may also want to check for other threads that may have already answered your questions before posting. Another good option even before using the forums is to go to the iPod nano support section and then search through the articles for possible solutions. The links I have provided to some of your threads have come from aquick search of the problem you listed starting on the main support page Support.

  • Help! "Disk can not be read from or written to" error

    Hi, I just bought a couple of movies on itunes but when I try to sync them to iphone it stalls and I get the error "Attempt to copy to disk "my iphone" failed. The disk could not be read from or written to". Oddly though everything else except the videos seems to sync OK (including new songs I added to my iphone playlist). Any suggestions?

    yeah, I can watch them on itunes I just can't get them to sync to iphone. I've also been able to sync other .mp4 videos to the phone just not the ones from the itunes store.

  • The ipod cannot be synched. the disk could not be read from or written to?

    So I've done everything possible to try to get my touch to sync all my songs from my itunes library at once and nothing is working. So sadly i spent the entire day plugging and unpluggin the usb cord because at most i could put 30 songs on my touch before it came up with the error "the ipod cannot be synched. The disk could not be read from or written to." this is very frustrating as i have many videos i purchased on itunes with anticipation of putting them on my touch but if i try to do so at most it downloads half then it pops up with the same error. If anyone of y'all can help, that would be greatly appreciated i'm slowly but surely giving up on the touch all together even though i love it this error to it is very time consuming and annoying.

    Same problem. With an iPod Touch.
    This began after I accidently pulled out the USB before it was fully ejected. (I hit eject, and the icon vanished from iTunes, so I THOUGHT I was okay...) But I got the error. And since then, I've got the error you speak of. Mine may be a tad off.
    When I drag a song from iTunes or the Finder into the iPod it copies fine but then the error pops up.
    But now it's fixed, and I'm not sure why. And I'm hoping it doesn't come back.
    I remember I went into the iPod Touch itself. Went to...
    Settings > General > Reset > Reset All Settings
    After that, I got back to the window from iTunes asking if I want to manually manage songs. I unchecked the box next to the choice of letting iTunes do it automatically.
    But Even after that, I had the synching problem.
    So I went into the main iPod Touch tab in iTunes. Under options the "Manually manage music and videos" box WAS CHECKED. I decided to uncheck it. Maybe the iPod was observing 'Opposite Day'. I know my cellphone does. On my cellphone, when I choose to play videos without sound, it plays WITH sound. So, I dunno...
    Anyway, after I UNCHECKED "Manually manage music and videos" I ejected the iPod and reconnected it. And I plugged the USB into another port. Guess what? It didn't automatically synch. And when I added music on my own from either iTunes or the Finder, it worked well too. The weirdest thing... when I went to have a look at the box next to "Manually manage music and videos" - it had been checked again, without my doing.
    UPDATE: And as I began typing that last sentence - THE ERROR CAME BACK. So.. NEVERMIND! I'm still stuck and angry!
    *UPDATE II:* The error happened again after a song I was listing to in iTunes from the Touch ended. Once it ended, the error popped up and music stopped playing. I tried dragging a new song from iTunes into the Touch and it wouldn't let me. I unplugged and then plugged the iPod back in, and dragged songs again. So far it works... SO FAR. So far no errors. I tried deleting a song from the Touch and also no problem.
    *UPDATE III:* I did a test. I added album artwork to songs that had none, already inside my Touch. It took a bit longer than it would have on my computer, but all tracks on the album got the art work, and the error message has yet to display since I did so.
    *UPDATE IV* I've only been adding up to 10 songs at a time, worried that it would freeze. This time I added 31 songs, and they all imported - no error messages. Currently I'm worried that if I play a song from my Touch through iTunes the message will return. I'm too afraid to do it deliberately. I know I was able to do so with no problem with my 2nd Gen 10GB iPod I've had for years. That was working with my computer as of 3 days ago!
    Message was edited by: Daniel Brown

  • Songs won't update.  Error message "can not be read from or written to"

    Right, so maybe someone can help me.
    I've had my Nano since Christmas and have never encountered any problems with it until recently.
    Whenever I try and update my iPod (or my husband's for that matter) I get the error message: Attempting to copy to the disk "Gatsby" (name of my iPod) failed. The disk could not be read from or written to"
    Sometimes one or two songs will work, and then I'll get the message. If I try again another few songs will work and I'll get the message again.
    I have tried everything I can think of.
    I have tried resetting my iPod. I've tried reinstalling iPod Updater and iTunes. I've tried restarting the computer. I've tried restoring the iPod to factory settings. And I still have the same problem.
    I tried calling Apple Support but they weren't able to help me much. So maybe someone here has an idea. PLEASE HELP!
    Since I've restored the iPod I no longer have any songs on it. I only have the few that have managed to copy inbetween attempted updates. My poor little iPod is useless until I can fix this problem.
    I have iTunes v6.0.4 and iPod Updater v1.1.1 (the update from 2006-03-23)
    Please help!
    Thanks!
    iMac G5 1.8GHz PowerPC   Mac OS X (10.4.6)  

    Well, I know my operating system is up to date. I know iTunes is up to date. I know iPod Updater is up to date.
    I don't think it's a damaged music file, because it doesn't hang on one certain song. It manages to update a few, then I get the error, if I try and update again, it does a few more songs then I get the error again. I've updated dozens of times with the same selection of songs and I've never had a problem.
    I tried resetting the iPod. I tried restoring it.
    Still hasn't helped.
    Someone suggested using fsck from my terminal, but it came back saying everything appeared to be okay. But, my songs are all on my external hard drive, does that make a difference?
    It's never seemed to matter before.
    I don't know what else to try.
    I don't think it's a problem with the iPod itself. My husband's iPod is doing the same thing, which makes me wonder if it isn't my computer, or perhaps a problem with iTunes or the iPod Updater.
    I've tried using a different cable, and different ports, but I still have the same problem.
    Any ideas?

  • "Device can not be read from or written to" error keeps coming up...

    I have recently updated to the 3.1 firmware on my iPhone 3G (after a couple failed attempts).
    The problems seemed to start there when the update froze midway through and I had to try a couple more times. After I did and restored my settings, iTunes said that my backup file didn't work. I tried a couple more times to restore from the backup but ended up having to restore as a new device.
    Now, as I try to sync all of my, well, everything, I keep getting an error message.
    It synced all of my contacts, apps, calendar, etc., but when it gets to my music and videos it will sync a bit of it before giving me the error messages:
    "Cannot sync ___, the required disk is not found"
    and immediately after,
    "Device can not be read from or written to."
    I've tried syncing my iPhone many times, and these errors keep coming up.
    What should I do?

    Hi,
    This article: http://support.apple.com/kb/HT1207 provides tips that will resolve issues causing this message to appear with iPhones and iPods.
    Make sure the iPhone is directly connected to a high-speed USB2 port on the PC, using the cable that came with it.
    -Jason

  • Disc can not be read from or written to

    I've had a huge problem with Itunes over the last few days. Many of my songs have the grey exclamation mark and for some reason itunes cannot locate them. Super frustrating. "The original file cannot be found."I have been able to locate some files but many have been totally lost.
    In order to replace the songs I can't find, I'm trying to add them again to itunes (from CDs, etc.). For some reason, when I try to add, I get the following error message "Attempting to copy to the disk "Macintosh HD" failed. The disk could not be read from or written to"
    For the love of god please help me before I lose all of my hair. 

    Get an external drive and back up as many of your files as you can while you can. You may have to do it folder by folder or file by file. The disk may be corrupt (though for what reason I don't know) or it could be bad.
    You want to verify disk, not verify or repair permissions.  Repair Permissions failed probably for the same reason you are having these other problems: there is a problem with the disk.  While you can run Verify Disk, you cannot run Repair Disk on your main drive unless you boot from another drive (such as the Install CD).  If you boot from the Install CD (with the disk in, hold down C while booting) it will ask a few language questions then you'll get to a point where there is a menu bar at the top of the screen. You can run Disk Utility from the menu and do a disk repair.  The repair may fix it but may not.
    Third party disk utilities such as Disk Warrior might be able to do more for you than Disk Utility.
    And you might want to give Apple Support a call. They are there to help.

  • Can not be read from or written to

    OK, so I've had my Gen 3 for several years, I recently restored it and formated it for my windows machine to transfer some files from my windows to my Mac.
    Upon restoring it back and refortmatting it to Mac, I learned that it now gives me an error message when adding playlists that says:
    "this ipod can not be read from, or written to"
    any idea what that is all about?

    Have you had a chance to look at this troubleshooting document? It may be of some help: "Disk cannot be read from or written to" when syncing iPod

  • Receiving error "disk could not be read from or written to" during synch.

    When I try to synchronize my iPod to iTunes, I get the following error:
    "Attempting to copy to the disk [ipod name] failed. That disk could not be read from or written to."
    This error occurs only when I have put about 0.5 GB onto my 4.0 GB model, so there's plenty of disk space. I have completely reloaded/reformated the iPod & iTunes software on both my computer and iPod on numerous occassions, but I have had no additional luck.
    I fear that this might be an issue with the actual hard drive on the iPod.
    Can someone help?

    http://docs.info.apple.com/article.html?artnum=301267
    Same answer as in your other post. : )

  • Touch can not be read from or written to

    After upgrading to iTunes 7.7.1 and iPod 2.0, I can not sync at all anymore. I get an error window telling me that my sync failed because my iPod Touch can not be read from or written to. I applied the "5 Rs" troubleshooting tips, to no avail. (5 Rs = restart, reset settings, reset iPod, remove files, restore).
    I went to the Genius Bar & they were able to eventually get it to sync, but replaced the unit anyway.
    I got home with my new iPod Touch and it had EXACTLY THE SAME problem as my old one did - the "could not read from or write to" my iPod Touch.
    I have a new appointment for next week at the Genius Bar.
    Has anyone else experienced this problem or know what the fix might be?
    I want to try restoring to the iPod 2.0 or prior iTunes software, but can not figure out how to do that.
    All help/suggestions are welcome!
    Heidi

    one of the solutions fixed the error on my itouch:
    Symptoms
    When using iTunes to sync photos to iPod and iPhone, iTunes creates a folder called iPod Photo Cache in the top level of the folder you selected for your photos. Picking another folder to sync does not erase the previous iPod Photo Cache. Depending on how many photos are being synced, the hard drive could fill up.
    Products Affected
    iPhone, iPod with color display, iPod photo, iPod nano, iPod nano (2nd generation), iPod (5th generation), iPod (5th generation Late 2006), iPod touch, iPod classic, iPod nano (3rd generation)
    Resolution
    Drag the folder named iPod Photo Cache to the Trash or Recycle Bin.
    If you're syncing from an iPhoto `08 album, use these steps to find the iPod Photo Cache:
    1. Go to your Pictures folder (~/Pictures) and locate the iPhoto Library file.
    2. Control-click the iPhoto Library file and choose Show Package Contents from the shortcut menu.
    3. In the iPhoto Library window, locate the iPod Photo Cache folder and drag it to the Trash.
    4. Close the iPhoto Library window.

  • When syncing photos getting error iPhone can not be read from or written to

    I am getting an error only when I try to sync photos. Error is iPhone can not be read from or written to. This only happens when I am syncing photos, so far everything else syncs fine. I have an iPhone 3G S. I had some pictures on the iPhone that I deleted, still no sync. I am restoring the iPhone right now.

    I am having the same issue. I get "iphone unable to sync, an unknown error occurred (-51)" I have restored twice and once even set up as a new iphone. Nothing so far has worked. If anyone has any suggestions, please pass them on

Maybe you are looking for

  • Problem while deploying ADF application in glassfish

    Hello I am using JDeveloper 11.1.2.3.0 I have configured Glassfish in my computer and I have followed the instructions as Shay explained here: https://blogs.oracle.com/shay/entry/deploying_oracle_adf_applications_to The problem is that when I try to

  • I have 3 iPhones, but I don't have my all contacts on all of them

    on my old iPhone i have all my contacts and music and data, but then I bought my new iPhone 6 with a new line, and then sync data from iCloud, but I don't have all my contacts in my new iPhone. Then, I get my third iphone 6  with a new line, and I go

  • BADI_CRM_BP_UIU_DEFAULTS with method GET_DEFAULT_VALUES

    Hi, I am trying to use the BADI_CRM_BP_UIU_DEFAULTS to default the Country field on an account. I found sample code to update fields within the view AccountDetails.htm of the BP_HEAD component which is read when the screen first loads, but the countr

  • How to build a full dynamic WHERE expression in ADFBC Faces View Object ?

    Dear Steve > I need an example about how to build a full dynamic WHERE expression in ADFBC View Object In UIX I known to do that, but i don't kwown how to do in ADFBC Faces. please help me to see an example. thanks Juan Carlos

  • How to install third party fonts into Photoshop CS6 cloud?

    Hi, in need of assistance.  My previous version of PhotoShop was CS5, and I have my photography logos created using the font "chisel thin".  Now that I have a new macbook pro laptop and am also now using the cloud version of PhotoShop CS6, when I ope