Can't synchronize with iTunes Ipod 4g
I can't synchronize with iTunes anymore, since the second day I've got my iPod 4g 2 weeks ago.
iTunes says "iTunes can't make a backup of *ipod name*, because the ipod is disconnected" (I've got the dutch version, tried to translate it as good as possible).
I allready tried to uninstal itunes and instal it again, but that didn't worked.
any other ideas?
edit: and now I have a second error, 13010
Message was edited by: jovano
Have you sync'd it with any other computer before?
Similar Messages
-
I have two IPODs and I want to synchronize with ITUNES in the same computer. How can I do it?
See:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities -
ok, so i finally found my ipod. I pick it up and it asks me if i would like to download the latest ios6 software so i did. Then moments later it died, ran out of battery. So i pluged it into my computer via apple usb cord. Then this is what itunes says "iTunes has detected an iPod in recovery mode.You must restore this iPod before it can be used with iTunes". All i want is to get my notes from the utilites section there so important to
If i restore it will my notes still be there, i dont want to restore original settings or something like that .
please help me what do i do?You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
Dear sir,
I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution
Yours faithfully
VineeshHello Vineesh
Try out the troubleshooting assisting below to get your iPod Classic to start syncing again properly.
iPod classic Troubleshooting Assistant
https://www.apple.com/support/ipod/five_rs/classic/
Regards,
-Norm G. -
my ipod can't sync with itunes.Keeps saying that itunes was unable to load data class information from sync services
See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2 -
my ipod can't sync with itunes.Itunes keeps saying that it cannot load data class information from sync services.It won't even allow me to do any updates
See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2 -
What do I do about this message? I've restored it 3 times, but this message still comes up, and i cannot put music on it now.
iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod.Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.
-
Ipod nano 3rd generation doesn't play music and doesn't synchronize with itunes
I have a ipod nano 3rd generation ( 8 GB) and it suddenly stopped playing music. The ipod doesn't play music even if I choose another song and the ipod doesn't synchronize with itunes anymore. I did a reset of the ipod and I installed itunes new but the synchronization doesn't works.
Get a flashlight and make sure there is no obstruction/dirt/debris in the Nano headphone jack. Be sure you plug the headphones all the way in, the plastic on the headset jack should be flush with the body of the Nano.
-
ipod touch..when I plug in to laptop, itunes comes up and I get this message. "Itunes could not connect to thehe Ipod because it is locked with a passcode. You must enter your passcode on the ipod b/4 it can be used with Itunes" It is stuck on the cord/itunes screen and cannot go any further...HELP
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
-
got a itouch on ebay and it says ipod is disabled and i connect to my computer itunes it tells me itunes could not connect to the ipod because it is LOCKED with a passcode you must enter passcode on ipod before it can be used with itunes. I asked people I
iOS: Unable to update or restore
-
It says could not connect to the ipod because it is locked with a passcode. You must enter our passcode on the ipod before it can be used with Itunes. I forgot the passcode so how can I enter/ restore/reset it?
As the linked articl says, place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I am trying to restore my son's iPod Touch 4th generation. I went about 20 minutes into the recovery process and got the error message, iTunes could not connect to iPod because it is locked with a passcode you must enter your passcode on iPod before it can be used with iTunes. The whole problem started with my son putting in a password that he has now forgotten. How do I get passed this?
its the 1st time ive heared of this
can u link it to an computer to add music?
if so you should be able to restore it
connect to itunes under the devices tab click on the ipod now click summary on the top
on the page you should see and check for update's or update tab
below that there should be an restore tab just click on the restore tab
NOTE RESTOREING WILL DELETE EVERYTHING YOU ADDED TO THE IPOD AND IT WILL BE BACK TO FACTORY SETTINGS -
I had some new albums I bogut from Itunes and wanted to put them on my Ipod Touch. Went to do that, ITunes said there was an update. I downloaded the update and then I couldn't see anything in my Ipod nor listen to anything. The screen of my Ipod shows a USB cable pointing to Itunes and when I plug it into ITunes again I get the message "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." And the ONLY option it gives me is to restore my IPod to factory settings. I looked online for answers but all I see are people having problems with this because they bricked their phone, which I haven't ever done or even know how to do. Would appreciate some help, planned on spending my day off listening to my new albums.
If you are in the USA you can redown
If the music is not in your iTunes library (it is not in the backup that iTunes makes), you can redownload it if you are in the USA.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Are you in the USA?
What do you not understand? -
when i pluged my ipod classic 5g to PC then it shows “iTunes has detected an iPod in recovery mode. you must restore this iPod before it can be used with iTunes”?then after restoring the PIOD when IPod restarted then Itunes again detect the same ERROR.
If you are using XP, and you went through the procedure at the bottom of the previously linked document to change the iPod's assigned drive letter, and you also tried putting it into Disk Mode...
If you have not already, try shutting down your computer and disconnecting all USB devices, including hub. Start up with only standard keyboard and mouse connected. Just to be safe, put the iPod into Disk Mode again
http://support.apple.com/kb/HT1363
Run iTunes. Connect iPod to a direct USB port on computer. iTunes may prompt you about "recovery" and ask you to do a Restore. Try to do a Restore again. -
I am getting a message that states "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." How or where do I go to restore it? As well, it's makes a crankling sound of some sort. Can someone, please assist. Thank you.
You restore it via iTunes on your Mac.
Restoring iPod to factory settings
B-rock
Maybe you are looking for
-
Adding column to Vendor Business report - S_ALR_87012093
Hi, I would like to add a column in report S_ALR_87012093 This new column suppose to containe vendor data, which is not available to add in detail list configuration / changing layout / hidden fields. Any ideas how can I do it? Regards Adam
-
How to update Tr code FB02 and update the field reference key1 (bseg-xref
Can any body help me how to update Tr code fb02 and update the field reference key1 (bseg-xref1) with the interest amount calculated. Below i have written My program flow logic The program should read the open items i.e debit items in the
-
Problem viewing Japanese characters in Excel sent via Email attachment
Hi All I am using FM '''SO_DOCUMENT_SEND_API1'' to send out an e-mail attachment (Excel file). I am able to receive the Excel file successfully. However I am not able to display the Japanese characters properly in my Excel file. I tried to display so
-
I'm passing checkboxes (i've tried switching to toggle switches) to a sub-vi. When the sub-vi front panel is open, the values pass correctly but when the sub-vi front panel is closed they do not. I first tried passing a cluster of booleans and then
-
Unhandled exception at 0x000F1C0F
When i run my project i get this message from VS express: Unhandled exception at 0x000F1C0F in The_Seed_.exe: 0xC0000005: Access violation writing location 0x00000000. when i try to press continue i pop-up again and is still on the samme exception an