Can't talk to other apple products outside of wifi or when I don't have data. What's wrong and how can I fix it ?
So I just bought a new iPhone 4S and I have to share my data with four other people so to avoid using it up I use wifi whenever possible. I use iMessage to talk to iPhones but when I'm not around wifi or when I don't have any more data, I don't receive any of their regular SMS messages but I can send them. I checked my friend's iPhone and he receives my message as an SMS but when he replied it was still in iMessage. Is it not detecting that my iMessage is off ?What's wrong and
how can I fix it ?
I think I fixed the apps, though.
*Turn off your wifi and only turn it on when you want to use it
*Lower your brightness
*Turn off "Push" on notifications and mail and turn on "Manual"
*Return to your home screen and then double click twice and tap and hold one of the apps you've previously opened, when they jiggle tap the red on each app until fully erased.
*Don't use your ipod while it is charging, allow at least a 10 minute charge (fully charged) before using it again.
See if this helps(: ... I still have no answer bout the camera issue. I might be going to apple soon so we will see then.
Similar Messages
-
Mac OS X 10.6.8 statup problem: desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?
You need to fresh install 10.6, programs fresh form original sources and return only vetted files (no TM migrations) from a regular storage drive
But this when erasing the drive use the Security Option: Zero All Data before installing 10.6
What has happened your data got corrupted and it's corrupted on the TM drive too.
So the Zero will map off bad sectors on your drive, the 10.6 install will be fresh, the programs will be fresh and only files will be returned, you'll find out in short order which ones they are.
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6
Once you are back up, then consider making a option key bootable clone.
Most commonly used backup methods explained -
My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?
Maybe:
iOS: Troubleshooting Messages -
My battery drains really fast and my macbook shuts off without warning basically everytime it is disconnected from power, what is wrong and how can I fix it? also whenever an application is opened the computer freezes and the application will either shut down or make the macbook run really loud.
Charge Information:
Charge remaining (mAh): 1450
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 1739
Health Information:
Cycle count: 379
Condition: Poor
Battery Installed: Yes
Amperage (mA): 196
Voltage (mV): 12573
I have the 13inch macbook and it is 2 years old (bought august 2009) -
A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?
If a tool is acting up, one suggestion is to reset the tool.
Ctrl-click on the clone tool icon in the Options bar and select Reset Tool. -
When I turn on my MacBook Pro and when I am at the login screen, the background is white rather than steel gray. What is wrong and how can I fix it?
It turns out that iCloud caused this issue. When I turned iCloud off my login screen was completely normal.
-
I was receiving a lot of trash emails and such and cleared all my cookies and history. Now I am getting this pop-up and it is interferring with my internet usage, "Exc in ev handl: TypeError: oSAPlg.oRoot.log is not a function." What is it and how can it be fixed, deleted, gotten rid of, etc. Thank you
Hi. SiteAdvisor is usually located in Firefox's add ons extensions. Hope this helps.
-
I upgraded IPAD to os6. Now Safari has lost all my bookmarks and won't let me add any new bookmarks or new folders. What is wrong? How do I fix this? IPAD was not synced to laptop.
I also upgraded iPad 2 to os6. However, I have not lost my bookmarks but I cannot add or delete any new bookmarks or new folders.
Livebythemoon recommended to reboot iPad. How to reboot my iPad? -
My iPod fourth genereation is closing apps down randomly shortly after I open them. Even the apps that were provided by apple won't stay open long. I've tried everything they've suggested and nothing has worked. What's wrong with my iPod and how can I fix it? I even reset the entire thing to factory settings and it did nothing.
Also, my back camera won't work most of the time and when it does red scratchy lines appear all over the screen and the picture won't come out clear.I think I fixed the apps, though.
*Turn off your wifi and only turn it on when you want to use it
*Lower your brightness
*Turn off "Push" on notifications and mail and turn on "Manual"
*Return to your home screen and then double click twice and tap and hold one of the apps you've previously opened, when they jiggle tap the red on each app until fully erased.
*Don't use your ipod while it is charging, allow at least a 10 minute charge (fully charged) before using it again.
See if this helps(: ... I still have no answer bout the camera issue. I might be going to apple soon so we will see then. -
I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?
My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
I must agree with pgwebgirl! -
My screen is distorted blurred and some weird funky colors what is wrong and how can I fix it
My screen is distorted, blurred and some funky weird colors very hard to read. What is wrong and can it be fixed
Try Settings>General>Accessibility>Invert Colors>Off.
Or, reset your iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Ever since I bought my Iphone I couldn't find FaceTime where can i download it? and how can i block a number that is bothring me without apps or Iblacklist?
Thank u for answering... There isn't anything that tell me that facetime is in my phone i tried what u said but there isn't any buttons.
-
My IPad will not turn on despite charging all night and all day. The Apple pops on but then shuts off again. It does this over and over. How can I fix this and get it up and running again?
Hey bellabeanbag,
Thanks for the question. The following resource outlines troubleshooting steps if your iPad is not responding:
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
If iPad won't turn on, or the display stops responding
Follow these steps, testing after each:
1. Turn the iPad off and turn it on again. Press and hold the Sleep/Wake button on top of iPad for a few seconds, until a red slider appears. Then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
2. Reset iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If iPad still won't respond after you restore it
Follow these steps, testing after each:
1. If you receive an alert in iTunes while restoring your iPad, refer to this article for instructions on how to resolve common issues with updating and restoring.
2. If you cannot restore your iPad in iTunes, or if iTunes does not recognize the device, refer to this article for instructions on restoring using recovery mode.
Thanks,
Matt M. -
i have downloaded itunes 5 times and samething... nothing... i really wish itunes had an online tech support live chat...
Find help from this article:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717 -
Someboby please help me.....THIS IS DOING MY HEAD IN!! I have had to reset my Ipad as my apple Id has been disabled which reset fine but after the reset I have gone to download an app it was automatically disabled again. Any ideas on why this is happening or how I can fix it would be awesome.
Apple ID being disabled is a different error, and one not related to your iPad.
Read: http://support.apple.com/kb/ts2446
Hope this helps
Maybe you are looking for
-
Digital signature stopped working in Acrobat Pro 9
My digital id functionality in signing PDFs has suddenly stopped working. I've tried using it with multiple documents and none are working. I tried to create a new digital id, but that doesn't work either. Here's the error message I'm getting: (pleas
-
Problem Viewing DTR Permissions - Failure getting ACL file
This is an NW04S-SP13 Standalone J2EE with EP and DI Usage Types. NWDI has been setup using the "ESS Cookbook". The Dev Conifg was imported from the ESS track and NWDS project was created from the ESS DCs but we could not change any objects. Looking
-
GP_CAT 1235 : ERROR: Could not initialize random
Hi, I get the following error in ULOG file GP_CAT 1235 : ERROR: Could not initialize random Algorithm when i start a server Thanks, Rajan Kumar Singh
-
Invalid serial number for Windows
Hi, I got Photoshop Elements 7.0 a while ago in the Wacom tablet bundle, and I installed it on my PC. But for some reason, my tablet stopped working on my PC and I wanted to install Photoshop on my laptop instead (which is Windows Vista). When I put
-
I was wondering if I'm simply not getting this right or there is something I'm missing. When I use the Database Export tool and select Export DDL including the check job for grants and no data when I get the ddl back it has the sql to create the tabl