Can't transfer large files with remote connection

Hi all,
I'm trying to figure out why we can't transfer large files (< 20MB) over a remote connection.
The remote machine is a G5 running 10.4.11, the files reside on a Mac OS X SATA RAID. We are logged into the remote machine via afp with an administrator's account.
We can transfer files smaller than 20 MB with no problem. When we attempt to transfer files larger than 20 MB, we get the "The operation can't be completed because you don't have sufficient permissions for some of the items."
We can transfer large files from the remote machine to this one (a Mac Pro running 10.4.11) no problem.
The console log reports the following error:
NAT Port Mapping (LLQ event port.): timeout
I'm over my head on this one - does anyone have any ideas?
Thanks,
David

I tried both these things with no luck.
The mDNSResponder starts up right after the force quit - is this right?
The following is the console log, which differs from the previous logs where we had the same problem:
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb4f70 and its source is FOUND
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb3990 and its source is FOUND
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb2b80 and its source is FOUND
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb1270 and its source is FOUND
Feb 4 06:13:57 Russia mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[951]: starting
Feb 4 06:13:58 Russia mDNSResponder: Adding browse domain local.
In HrOamApplicationGetCommandBars
In HrOamApplicationGetCommandBars
In HrOamApplicationGetCommandBars
Feb 4 06:23:12 Russia mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[970]: starting
Feb 4 06:23:13 Russia mDNSResponder: Adding browse domain local.
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
[442] http://discussions.apple.com/resources/merge line 4046: ReferenceError: Can't find variable: tinyMCE
Thanks,
David

Similar Messages

  • Can´t print large files with 10.5.7

    Hi,
    we finally have updated our G5s, 2x2GHz, 4GB RAM, 500GB system disk. Since then we are unable to print documents from CS3 + CS4 which result in cups print files > 1 Gb. Doesn´t work with GMG rips, HP Laserwriters and Adobe PDF printers. The jobs always show up as "stopped" in the queue. Error log of cups says:
    I [11/Jun/2009:16:42:09 +0200] [Job 55] Adding start banner page "none".
    I [11/Jun/2009:16:42:09 +0200] [Job 55] Adding end banner page "none".
    I [11/Jun/2009:16:42:09 +0200] [Job 55] File of type application/pictwps queued by "dididi".
    I [11/Jun/2009:16:42:09 +0200] [Job 55] Queued on "EpsonISOcoated_39L02" by "dididi".
    I [11/Jun/2009:16:42:09 +0200] [Job 55] Started filter /usr/libexec/cups/filter/pictwpstops (PID 1363)
    I [11/Jun/2009:16:42:09 +0200] [Job 55] Started backend /usr/libexec/cups/backend/pap (PID 1364)
    E [11/Jun/2009:16:42:10 +0200] [Job 55] can't open PSStream for stdout
    E [11/Jun/2009:16:42:10 +0200] [Job 55] pictwpstops - got an error closing the PSStream = -50
    E [11/Jun/2009:16:42:10 +0200] PID 1363 (/usr/libexec/cups/filter/pictwpstops) stopped with status 1!
    I [11/Jun/2009:16:42:10 +0200] Hint: Try setting the LogLevel to "debug" to find out more.
    E [11/Jun/2009:16:42:12 +0200] [Job 55] Job stopped due to filter errors.
    We have tested a catalog file with 150 pages which didn´t print. If you broke it up into 6 pieces (print page 1-25, 26-50...) it did work. Unfortunally we have jobs with single pages exceeding this limit. All together we have tested around 10 differend files.
    We have tried to reset the printer queue, installed the drivers and deleted and created all printers, but nothing helps. Looks like cups or one of it´s helper can´t handle files larger than 1 GB?
    Any help is welcome.

    Hi there,
    Does you printer/RIP support protocols other than AppleTalk? If it does, then I would change it to something like HP Jetdirect-Socket.
    PaHu

  • Can I receive large files with Adobe Send?

    Does Adobe Send make it possible to receive large files?

    The incoming address can be whatever one is most preferable for you (just let the sender know). When you receive an email from Send, it just includes a link to the sent file. That way, you don't bump up against any file size limitations that your email client might impose.
    Best,
    Sara

  • How can I transfer large files from my iPad to PC-windows?

    I have several videos on my iPad (recorded using the iPad camera).  I am trying to get these transferred to my PC-Windows. When I connect the iPad to the PC and try drag-and-drop from the Camera icon, video files greater than 600MB appear with a zero (0 KB) size on the PC.
    This issue has been reproduced using 3 different PCs (Windows XP, Windows 7).
    I have tried the PC-Windows Camera wizard to transfer files (instead of Drag-and-Drop) and I get the same result.
    ITunes does not have an option (on Windows) to transfer these video files (from PC to iPad).
    I am using an iPad 2 with iOS 6.0.1.
    Note: the video files play fine on the ipad.

    Yes, I have tried. All smaller videos and photos transfer fine. It is only with videos > 500 MB that get created on Windows with 0 (zero) size (the file name gets created on windows but with 0 Bytes).
    Let me add that I do not see the "DCIM" option from Windows Explorer. I only see the folder under Scanner and Cameras.
    Anything I need to do to see "DCIM"? I do see DCIM when I connect my iPhone 4 to the same computer, but not the iPAD.
    Thanks

  • I have iTunes on my work PC, can i transfer that file to my home laptop as dont find  the time to play around with it at work?

    I have iTunes on my work PC, can i transfer this file with all of my purchases and music i have in my library to my home laptop as finding at work i just dnt have the time to play around with iTunes. My wife has iTunes on my laptop with her purchases and her library though, will this be an issue also ? Can i have hers and mine iTunes on our single home laptop?

    Hello victoriak13,
    Thanks for using Apple Support Communities.
    Please see the support article below to learn more about iTunes Store movie rentals.  You can not move the rental from one computer to the other, but can sync it with an iOS device.
    Watch your movie on the device you used to rent it. If you rented the movie on your computer, you can move it to an iOS device or Apple TV (1st generation). To do this, connect the devices and sync using USB. When you move a rented movie from your computer, it will disappear from your computer’s iTunes library. You can move the movie between devices as much as you want, but you can only have it on one device at a time.
    FAQs about renting movies from the iTunes Store
    http://support.apple.com/kb/HT1657
    Take care,
    Alex H.

  • Connection drop when transfer large file

    We are using a IBM T40 (with 802.11b build-in). We are able to surf web and ping successfully. Once we transfer large file, the connection just drop and the debug log from the AP1200 shows:
    Dec 18 10:39:57.095 H: %DOT11-4-MAXRETRIES: Packet to client xxxx.xxxx.xxxx reached max retries, removing the client
    Dec 18 10:39:57.095 H: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station xxxx.xxxx.xxxx Reason: Previous authentication no longer valid
    However, when we try using Cisco 350 PCMCIA cards and Orinoco, there is no problem with the large file transfer.
    We have upgraded the driver to the latest version.
    Any help. Thks

    This type of error is usually because of RF interference. When the AP sends a packet to the client, the client must ACK this packet back to the AP, if the AP receives no ACK from the client, it will resend this packet. It will continue this process for 16 times (default config) before assuming the client is off the network now (person moved out of range or powered off their computer) and will remove the client from its association table. I would verify coverage via a site survey, looking at not only signal strength, but also signal quality

  • I can't transfer my files from my Power Mac G5 to my Mac Pro using firewire connections. Has anyone else had this issue?

    I can't transfer my files from my Power Mac G5 to my Mac Pro using firewire connections. Has anyone else had this issue?

    Don't choose from another Computer, because with the older one in Target mode it really isn't a Computer, just a big Firewire Drive, choose From another Disk...

  • My laptop was stolen and with it my itunes, all of my music (including non-apple downloaded content) is still on my iphone 5, how can I transfer the files to my new laptop which is authorised to the same apple ID?

    my laptop was stolen and with it my itunes, all of my music (including non-apple downloaded content) is still on my iphone 5, how can I transfer the files to my new laptop which is authorised to the same apple ID?

    See this user tip for recovering the media from the iPhone: https://discussions.apple.com/docs/DOC-3991

  • TS1314 how can we transfer jpg file to ipad4 with extension name

    how can we transfer jpg file to ipad4 with extension name

    See:
    iOS and iPod: Syncing photos using iTunes
    What do you mean by "with extension name"?

  • I have Macbook Air with Yosemite os but i can't transfer my file on ftp server

    i have Macbook Air with Yosemite os but i can't transfer my file on ftp server
    i need help

    I'm confused how you think someone on Apple's discussion board can help you with what's clearly a Windows Server problem.
    Surely this would be something better asked in a Microsoft support forum?

  • How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?

    How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?
    Do I need to buy an adapter? How do I setup the software to make these two system connected?

    r95941081 wrote:
    Thanks for your answering. But the issue is that I'll often transfer a large amount files from PCs to the Macbook, and I'm explring the way to use firewire since there is indeed an i-S400 port in the VAIO laptop, and it's much faster.
    USB 2 is faster than Firewire 400 and USB 3 is faster than Firewire 800
    If it was another Mac you were transferring from then you could use Firewire Target Disk Mode which makes the boot drive of the old Mac appear on the desktop of the new Mac to rapidly copy files, but you have a Windows PC with no FWTDM capability.
    So to connect the two machines requires a network be setup over Ethernet and mucking around with the complexities of all that and it still takes awhile to finish. One can't setup a network with a PC over USB or Firewire, only Firewire with another Mac.
    You get a external USB drive, USB 3,2,1 is fine and just drag and drop copy, the machine does all the work and you go do something else until it's finished, then repeat the same with the Mac.
    Fast simple and effective, let it copy overnight if you have too.
    I routinely clone my entire hard drive via USB 2 and it only takes a hour and a half for 350GB.
    By the time you figure out how to network a Mac and a PC over Ethernet and getting it work to transfer files, you could be done already via USB.

  • Unable to transfer large files from MB to External HDs

    Hi,
    This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
    I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
    Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
    When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
    However, there is no such problem when I import to the MB's internal harddrive. When I then try and shift the large file off the laptop to an external drive, via USB, ethernet of wirelessly, for editing and save keeping, it fails half way through.
    I have the same problem when I try back-up my 17gb virtual windows machine I use with VMware fusion off the laptop to an external drive.
    I am currently burning an 18gb iMovie project from the MB's internal HD, over 5 DVDs using Toast's disc-spanning and will reimport them to the external, which is really time consuming.
    Also to note, Final Cut Express doesn't have these problems as it seems to break up what would be an 18gb movie file into several smaller files, which my MB is quiet happy to let go onto an external drive. However, the problem re-emerges on Final Cut Ex when I try and import a HDV tape. Possibly FCE isn't breaking them up into small enough pieces for my MB to handle?
    Any ideas why this is happening and what I can do to fix it? Or does this mean a new laptop?

    Irish Apple Fan wrote:
    Hi,
    This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
    I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
    Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
    When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
    I'm a bit late to the party, but specifically there's a 4GB file size limit in the FAT32 format that is standard on many external hard drives. I've run across this problem before, and usually it copies over most of the file and then quits when it reaches the limit.

  • "Windows Easy Transfer can't transfer your files and settings." Why?

    I saved my files and settings from a previous installation of windows 7 to an external hard drive using windows easy transfer. Now when I try to transfer those files and setting to my new installation I get the following message:
    Windows Easy Transfer can't transfer your files and settings.
    The message pops up only a few seconds after the transfer begins.
    Why is this?! I need those files and windows has screwed me. Everything is basically the same as before I reinstalled. Same computer, same windows 7 installation just recovered to factory settings. Same system language as before. BTW I'm on a Toshiba L505 laptop
    running Windows 7 Home Premium.
    I have tried all the usual suspects such as a clean boot and uninstalling my antivirus to rule out third party interference. I have more than enough space on both my computer and on the external hard drive. I have tried only transferring a user account a
    few MBs large. I have reinstalled the OS twice just in case something went wrong there. I have clicked on the .MIG file directly. All lead to the same error message.The transfer file seems to be intact and not currupt
    Is there another software other than WET that can use the same transfer file that WET created to restore my files? Please help me solve this if you can or at least point me in the right direction because right now I'm clueless. I can't emphasize how important
    those files are to me. I've searched for solutions on several forums and it seems that this is a problem people have been having for years now and windows hasn't provided an answer yet.
    An interesting note, When I reboot the laptop after trying to do the transfer, a new user account appears at startup alongside the one I normally use. This new user account has the same unique name of the user account I am trying to restore but that's where
    the similarity ends. All the settings for this account are default settings and empty folders. What does this mean?

    Hi Vincent, like I said I tried all of that already and it failed. Thanks a lot for trying to help though. Imperfect1, so sorry I took so long to reply. No that's not the case. I was trying to restore from x86 to x86.
    Well, I finally gave up. I've scoured the internet for a solution. You'll probably find duplicates of this post all over. This has been a known software problem with Windows Easy Transfer for years and Microsoft has done nothing to fix it or warn users of
    the risks. Shameful!
    Anyway, I managed to recover my files with this life saver of a program here>
    http://www.visser.com.au/blog/migrecover-for-microsofts-windows-easy-transfer/
    MigRecover Utility for Microsoft's Windows Easy Transfer.
    I can't express how grateful I am to the developer and the host for the download. You guys are the most awesomest people ever. Cheers.
    Here's how you modify the syntax in commmand prompt if you used a password to protect the mig file in WET>
    http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/68910c1a-3c4b-47af-bb22-0e7ec6f2054f/
    Just remember to change the source drive letter in "C:\SaveData.MIG" to the actual drive it's stored on if your MIG file is on an external drive like mine was; whether it's E:, F:, G: or whatever.
    Good luck to anyone with the same issue who stumbles upon this post. I hope it helps you as it did me.
    AsdyAsks

  • HT204382 how can I transfer wma files to my mac?

    how can I transfer wma files to my mac?

    A Macintosh Classic (http://support.apple.com/kb/sp198) has a SCSI hard drive. Even though the hard drive can be removed and placed in an external SCSI enclosure, it is not going to be easy to find a way of connecting it to a modern Mac. That would normally require a USB-to-SCSI adapter, which may or may not be supported under the latest operating system versions.
    The easiest method of transferring files from a Macintosh Classic may be via an external USB floppy drive connected to the modern Mac. 1.44 MB Mac-formatted floppy disks can be used for such transfers (not 800K).
    A SCSI Zip (100) drive could in principle be connected to the SCSI port of the Macintosh Classic. The Zip disk could then be moved to a USB Zip (100) drive connected to a modern computer.
    The Macintosh Classic does not have built-in Ethernet, nor a slot for an Ethernet card (certain other "classic" Macintosh computers do have the ability to hold an Ethernet card). There are some external solutions (such as SCSI-to-Ethernet adapters), but with limitations. For a networking overview, the http://www.applefool.com/se30/ web page could perhaps be of interest.
    It is also possible to arrange a null-modem connection between a Macintosh Classic and a modern computer, providing that a USB-to-serial adapter is attached to the latter (appropriate terminal emulation programs are needed on both sides).
    Jan

  • How can I transfer .mov files to my iPad?

    How can I transfer .mov files to my iPad?

    If it's on a SD card in your camera, you cau use the camera connection kit, either by connecting the camera or inserting the SD card.
    If it's on your computer, you can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

Maybe you are looking for