Can't turn off after connect to PC or Camera

I have an iPod Video 60GB Model MA003ZP which I bought in November 2005.
My iPod always have problem that everytime I connect my iPod to PC or digital camera (via camera connector) and then I disconnect it (waiting the icon do not disconnect to disappear first).
After I disconnect my iPod, I cannot turn off my iPod immediately or even I tried to reset iPod, I still could not turn it off.
From my observation, everytime I disconnect my iPod from PC or camera, the harddisk will keep moving or busy about 5 mins after disconnect. And then when the harddisk stop, I will be able to turn the iPod off.
I compare with myfried iPod Video 60 GB Model MA1XXX, it do not have the problem like mine.
I go to the Mac shop that I bought they suggest me to update software from 1.0 to 1.1. I did it and the problem is still there.
Is it the harddisk problem on my model? Hope support team can help me.
Video 60 GB, Model No. MA003ZP    

Sounds like a similar problem to what I've had. After importing photos thru the camera connector I've had major problems that I'm still trying to solve... my ipod wouldn't play any music, it kept skipping everything and taking a very long time to respond (it took a good 60sec to turn it off). It also used all the battery in about an hour (and was fully charged to start off with). I went looking for the photos to delete, but they didn't seem to exist! Got the thing home, charged it up and managed to delete the photos. BUT, ipod will skip first 4-5 songs before deciding to play something, is **** slow to respond and keep eating thru the battery. any reason for this madness and any solutions apart from restoring it (computer hard drive rebuilt over xmas, and no back up of course...)

Similar Messages

  • I can´t turn off my ipod touch and the camera doesn´t work

    I can´t turn off my ipod touch and the camera doesn´t work..How can i turn it off if any button works?

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • MY MAC TURNS OFF AFTER CONNECTING MY IPOD SHUFFLE

    Every time I connect my ipod shuffle to either my macbook pro or Imac, the computer shuts off.  Can anyone assist me with this issue?

    Hello bjc, 3418,
    It sounds like your iPod is causing any computer you plug it into to turn off unexpectedly. If you've already tried a different usb cable, I would reset the iPod and test it again. 
    Resetting iPod shuffle
    Then if the issue persists, it sounds to me like that will need service to fix this iPod:
    Apple - Support - Service Answer Center
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Wifi can't turn off after update!!!

    After recent update of my xperia z1, I realise that my wifi cannot seen to turn off. I try the setting but the wifi just stay on even when I try to turn it off

    Repair your phone with 
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Analog Switch can not turn off after stop running

    Hi,
    Attached is the VI of analog switches.
    My problem is:
    After I stop running the VI, the digital channels keep sending signal as the VI shows. But I want to every channel signal to be 0 when I press stop.
    Is there any way to do this?
    Thanks,
    Attachments:
    Analog Switches.vi ‏16 KB

    Simply do another DAQmx Write before the Close Task.

  • How can i turn off library sharing remotely because i cant remember all the computers or systems

    I want to be able to add my new computer to my library sharing however it will not let me. It says i already have 5 computers on the system. My question is as i said, how if possible can I turn off the connection to the other computers?

    This isssue is about authorisation rather than home sharing.
    You can't de-authorise just the computers you no longer have access to.
    Your only option is to de-authorise all your computers and then re-authorise those you wish to be authorised. You can do this by logging into your account settings in iTunes on your computer (Store > View My ID) and selecting the option to de-authorise all.
    Please note however, you are only permitted to do this once in each 12 month period, therefore you would be better de-authorising your computers before you lose access to them. you can do this from the 'Store' menu in iTunes.

  • Mail turn off SSL connection isn't possiple

    Hello,
    I update from 10.7.4 to 10.8 here and I have a big problem in Mail now:
    I use a private IMAP server without SSL connection.
    In Mail from 10.7.4 works this fine, but in 10.8 Mail would like a server certificate and an can't turn off SSL connection for the smtp server.
    What's the problem?
    Anybody can help me?
    Sorry for my bad english :-)
    Greetings, Bernd

    I found a kludge:
    Go in SMTP server setup -> Advanced and enable the option use costum port and fill out a port number (exp. 25).
    Mail don't ask to an certificate anymore.
    I hope, Apple remedy this problem in an 10.8 update.
    Greetings,
    Bernd

  • TS1363 apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • How can i turn off my laptop display when connected to an external monitor

    Hi,
    How can I make my laptop monitor turn off when connected to the 27 inch cinema disply? When connected to the Cinema display and the Laptop is open,the display on the laptop shows my wallpaper screen.  Is there a way to have the laptop display turn off?
    Thanks

    I'm having the same issues. Using the following command in terminal does not work for me. After rebooting the laptop screen still comes on.
    sudo nvram boot-args="iog=0x0"

  • My just bought new ipad screen stuck one a game. Can't turn off, can't get into log in screen. I connect ipad to my imac, but message say need to unlock ipad. But my ipad screened dead. Please help!

    My just bought ipad with retinal display 32G, screen frozen at one of game my son play. Now I can't turn off ipad, I can log in ipad. I connect ipad to my apple computer, message say I need to unlock the ipad, the problem is I can't even get to ipad home screen to unlock or enter the password. Basically, my ipad is dead. I can't even know what my series number etc. Please help!
    Thanks!

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • How can I turn off Recently Websites when opening new Safari window? After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed.

    How can I turn off Recently Visited Websites when opening new Safari window?
    After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
    Thank you for your time, patience, understanding, kindness, and concern.

    Thanks for replying, but that isn't the answer I am looking for.  Also, there is no + sign, UNLESS you do tap the overlapping boxes.
    Let me try to ask my question a little more clearly:
    When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
    So my question is, HOW DO I TURN THESE OPTION OFF?
    *UPDATE  (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
    Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
    Have a blessed day.

  • I set up Keychain and do not have access to the telephone I gave.  Now I can no longer connect my ipad to my windows computer.  I can not turn off Keychain...it is awaiting authorization from the SMS on the telephone I do not have access to.

    I set up Keychain and do not have access to the telephone I gave.  Now I can no longer connect my ipad to my windows computer, itunes does not automatically open when I plug in the USB.  I can not turn off Keychain in my ipad since authorization is pending awaiting the code sent by SMS, which I can not get.  Can someone advise how to get rid of Keychain.  Should I cancel my icloud account?

    I appreciate your help.
    Have reset the ipad, but that changed nothing.  I can not turn off Keychain, iit remains "pending approval".  Probably, the only thing to do is to close my icloud account...which I hate to do since there is a lot of data saved there.  But, I am unable to back the ipad up on my Windows 8 computer because itunes no longer opens when the ipad is attached.
    Oh well...computers are computers and it is impossible to cover 100% of the situations.
    Keychain iss not the best app for someone who lives in 3 different countries.
    Thanks

  • For the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
    http://concierge.apple.com/reservation/us/en/

  • Can i turn off the option that enables iOS 8 to connect to my apple tv without using wifi?

    I am a schoolteacher and our school uses Apple-tv to project lesson contents. We have separated the students wifi network from the teachers wifi network, so our students won't be able to use the apple-tv's and disrupt our lessons.
    Since the introduction of ios8, the separated wifinetwork doesn't do the trick anymore. Students can now use every Appltv in their vicinity to project whatever image they want. This is a problem.
    Can we turn off the option that enables IOS8 to connect to apple-tv without using the wifi network?
    Thanks in advance.
    Marco

    Unless buffering a rental/prior purchase to watch it should not consume significant bandwidth when connected.
    Power wise it uses 6W at most.
    You can't power off from the remote but you can set it to sleep -
    Press and hold Select for five seconds (or go to Settings > Sleep Now on Apple TV (2nd generation), or Settings > Standby on Apple TV (1st generation)

  • Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

    Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
    Thank you for all of your answer.

    I've seen it mentioned on here that a PRAM reset may solve it:
    Reset PRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P and R.
    You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

Maybe you are looking for

  • Why does my css menu not work on my mobile?

    I have done a fluid layout which appears to work fine on my mobile, but when I try to use the dropdown menu it does not work. I have a Nokia C3 by the way - Ancient I know but it uses internet and I don't know whether many people out there will still

  • Best practice for RAC connections

    Got a question of what people consider best practice for setting up high-availability connection pools to a RAC cluster. Now that you can specify the fail-over logic right in the thin connection string it seems like there are three options. A) Use OC

  • Encoded dvd sticks at sane pint after burning

    I am having this annoying problem with a wedding film we are producing. After exporting my qt file as prores I take the file into compressor and use the 90 min preset and create the DVD in DVD studio pro with chapter marks and menus at this point all

  • Document Level Scripts .. Need a simple example!

    I've been trying to add a function to a form just to avoid writing the same script over & over again & am not succeeding :| I'm trying to add even only an app.alert function.. I add a script object under a subform 'P1' called 'hello'.. in hello, i wr

  • What is the poly count on an Ipad?

    Generally speaking, what are the technical limitations faced by iPad games? (e.g. poly count, frame rate).