Can't turn off my ipod, just keeps spinning and clicking

I have a 40GB click wheel ipod, about 1 year old. I just tried to update my playlist, but my computer couldn't recognise the ipod. I tried to reset it, but now all it says is "Disk mode, OK to disconnect", but the little hard drive keeps spinning and clicking and I can't turn it off. It doesn't matter if it is connected or not to the computer. Any help please? Thank you.

Mary PS,
I had the same problem with my iPod, sad iPod icon/www.apple/support/ipod, and I tried many times to reset/restore, but nothing would work and the enitre time I could hear the hard drive cycling.....and I figured well hit it with a ball peen hammer cause it is going back to apple regardless....sure enough "whumped" it into the palm of my hand and I was able to reset/restore it......This can't be the answer, can it? Is there physical damage and that is why the hard drive was "cycling"? What does Apple recommend that I do?
thanks
Tim

Similar Messages

  • How can I turn off the Ipod 5g speaker so it just plays through the headphones?

    How can I turn off the Ipod 5g speaker so that it just plays through the headphones?

    First make sure your headphones are plugged all the way in, meaning no silver from the headphones plug can still be seen.
    If that's not the issue, try a hard reset of the Nano.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • How can I turn off imessage for just one of my contacts? Me and my husband just upgraded (both had iphone 4), I got the iphone 5s and he got he note 3. All my text to him automatically send as a imessage. Ive tried to delete his contact and then went back

    How can I turn off imessage for just one of my contacts? Me and my husband just upgraded (both had iphone 4), I got the iphone 5s and he got he note 3. All my text to him automatically send as a imessage. Ive tried to delete his contact and then went back in and reentered it but that doesnt work.

    Have your husband text the word "stop" to 48369. This should take his number out of the iMessage system.
    Go into your settings under messaging and make sure the box to send as an SMS if iMessage is unavailable is checked.
    Hopefully this will get your messages sending/receiving to each other.

  • I can´t turn off my iPod

    Please help me, I can´t turn off my iPod by cliking the play/pause.

    Welcome to Apple Discussions!
    You need to reset your iPod by holding down Menu and Select for 6-10 seconds...
    Resetting iPod
    It may take several attempts.
    After the iPod resets, wait about a minute. Now try turning if off.
    btabz

  • How can I turn off the message that keeps bugging me to update to Firefox 6.0?

    How can I turn off the message that keeps bugging me to update to Firefox 6.0? Given the problems and incompatibilities with 5.0 I have no intention of upgrading until it's absolutely necessary!

    Settings>General>Accessibility>Voice Over change to off.
    PJRS

  • I can´t turn off my ipod touch and the camera doesn´t work

    I can´t turn off my ipod touch and the camera doesn´t work..How can i turn it off if any button works?

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • When turning on my Macbook, the Apple logo shows up, but then the circle just keeps spinning and I cannot move forward...PLEASE HELP!

    When turning on my Macbook, the Apple logo shows up, but then the circle just keeps spinning and I cannot move forward...PLEASE HELP! Can I take it to the Apple Store to get fixed? Can I do something? It's driving me nuts!

    Do you hear any clicking?
    Boot from the install disk and repair the disk and permissions.

  • TS3274 how do I get my iPad to power off. It just keeps spinning.

    how do I Get my iPad to power off?  It just keeps spinning.

    Try here:
    iOS: Not responding or does not turn on
    If not successful, let the battery fully drain. After charging for at least an hour try again.

  • My creative Cloud desktop app just keeps spinning and I can't sync my computers

    I have been trying to sync my desktop to my laptop and my creative could app just keeps spinning and spinning.  Internet works.  I am signed in.  When I say to sync now, it take a long time and goes through the process and then says it can't connect to the internet, yet I am on the Internet and my account is open.  When I look at the desktop app, the Home page just keeps spinning and spinning.  All programs are up to date.  HELP!

    Hi,
    quit cc app and then from the activity monitor try and close any itunes services that are running in the background.
    Thank You
    Arjun

  • HT1430 My iPad isn't getting connection to internet.  It just suddenly stopped!  It says it is connected to WiFi but it just keeps spinning and nothing will come up.  Have tried rebooting my router and iPad (my other computer is connected just fine).

    My iPad isn't getting connection to internet.  It just suddenly stopped!  It says it is connected to WiFi but it just keeps spinning and nothing will come up.  Have tried rebooting my router and iPad (my other computer is connected just fine).

    Try turning WiFi off on the iPad, then reset it again, turn WiFi on again and join your network again if necessary. Or go to Settings>WiFi>Your network name>Forget this network. Reset your iPad and then join your network again. Or - settings>General>Reset>Reset network settings. Reset the iPad, then try to join your network again.

  • When I open iPhoto on my desktop, it just keeps spinning and won't go further.  What should I do?

    When I open iPhoto, the spinning icon just keeps spinning, and it won't go further no matter what I do.  I have rebooted, etc, with no luck.  Suggestions?

    details please
    What version of Photo? Of the OS? what has recently changed?
    You can try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
    LN

  • On start-up macbook chimes, grey apple but spinning wheel just keeps spinning and spinning and...

    So my Black Intel Macbook running Leopard was acting a bit funny.  So I shut it down and tried to re-start it but after it chimes and shows the grey apple and spinning wheel.... it just keeps spinning and spinning.  I shut it down and tried pressing the power button and immediately held down the Command (x), Option, P, and R keys simultaneously until hering the startup sound a second time (re-setting the PRAM).  I get the same resultsd.  Does anyone know what I should try next?

    Reinstall OS X:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Can't restore nor can I turn off my iPod

    HELP!
    My iPod is connected since last night to my laptop and I keep getting an error saying could not be restore 0xE800006B. Also it is impossible to turn off my iPod so I have to leave it connected to my laptop so that I don't drain the battery.
    My iPod is stuck in aloop trying to restore but after 24 hr only have reached less then half the progress bar.
    Please I need a solution, my iPod is what keeps me organisez
    HELP!

    Mine is doing the same thing! I just tried to turn it off and now I'm stuck with the loading wheel!! I can't do anything! Even when I plug it into the computer, itunes won't even recognize it. It says almost the same error but it has a 5 at the end insted of a B: 0xE8000065
    I don't know what to do.

  • Can you turn off imessage for just one person?

    my boyfriend went from a iphone 4 to a windows phone but kept the same number and it still sends him imessages when my imessage is on and its annoying to hae to click send as a text every time. how do i fix this? can i turn it off for his number?

    Elisa523 wrote:
    I have one friend that I text a lot who has an iPhone and I want to be able to text her using text message instead of iMessage. Another one of my friends only has an iPod though, so I don't want to turn off iMessage. Is there a way I could turn off iMessage for just my one friend?
    No.
    They can turn off iMessage and they won't send/receive them

  • How can I turn off the screen while keeping the mac awake?

    I am using teamviewer to remote connect to my office Imac from home. However, every time I connected, my imac screen will turn on and everyone else in the office can see what my imac is doing..
    Is there some method to turn off the screen while keeping the mac awake, so I can remote connect to it?
    PS: I am using OSX 10.7.3

    Energy Saver, you can keep the computer awake while the screen saver shuts the monitor off but I'm not sure that would do it for you.

Maybe you are looking for

  • Archive user mailbox when the user database near to limit

    Hello Dear, I have deployed a exchange server 2013 in my organization with dag solution.Also I have deployed another exchange server 2013 with only mailbox role for archiving user mail box.Now want to create a rule or a retention policy which is like

  • Mark RV45A-KETDAT field as not modifiable in VA02

    Hello guys. I need to Mark the field RVA45A-KETDAT as not modifiable in VA02. I've been searching for information but was referring to implement a BAPI, or an User-Exit, or an Transaction Variant, but I would like to know if is there a possibility to

  • How to stop sapscript calling MS word when I want to edit the elemets...

    Hello Experts, In SE71, when I want to edit the element/codes of a particular window, I click on the 'edit text elements' window but it calls MS word and the code is displayed there. I want the 'original' editor wherein I can see the '/E', '=', etc.

  • Plugin container wont close

    Running newest versions of FF and flash, win 98 with all updates. Avast anti virus free version. When running intensive flash apps the plug in will hang and crash. Using Proc Explorer I see plugin-container.exe has maxed my ram and swap space and the

  • Facebook application not compatible

    the facebook on my iphone 3g got deleted by accident and now when i try to download the application again it says its not compatible with this iphone. does anyone know what i can do to fix this?