Can't turn off offline mode

Hello i got this problem with my nokia 5230.I insert my main sim card and it doesn't show no zone it's in offline mode.And i can't change another mode it just shows no sim card inserted....
I put another sim card in it works just fine and asks to run or not to run offlien mode at start.
So do you have any suggestion on my problem?That number is really important for me

If you have a locked phone, and the sim isn't from your airtime provider it won't work, you should be able to get your number ported to the sim that works, or if it is from your current airtime provider, ask for a replacement !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode
Why i cant watch youtube as youtube inform this "This video is unavailable with safety Mode enabled. To view this video, to need to disable safety mode" how can i turn off safety mode

You need to disable Safety Mode at the bottom of the YouTube page. More info here:
https://support.google.com/youtube/answer/174084?hl=en

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.

I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Trying to run 2 external monitors, can't turn off clone mode

I have the 13" macbook pro running snow leopard, and recently bought two acer VGA monitors with a Matrox DualHead2Go. My problem: each monitor shows the same exact thing no matter what i do. I understand this is called "clone mode," and i can't seem to turn it off. I downloaded the driver for the matrox, and have tried a million different things to get clone mode to turn off. It seems like my computer only recognizes one monitor. When i try to arrange the displays under the preferences, it only shows only one external display. I have scoured the internet--no one else seems to have this exact problem. My guess is something's wrong with the dualhead2go, or maybe the one i have isn't the right one, or isn't for mac. Help please!
thanks,
hcm

If it's not too late to look at other products, you may want to check out Tritton's USB for multiple monitors. Before I switched from a PC, I had used Matrox Dual Head2Go with hit and miss luck. I then switched over to Tritton's product - it was a lot cheaper and worked better for me. When I switched to my MacBook Pro, I was able to continue to use the Tritton USB. I am currently running two monitors (VGA), plus my MacBook montor, for a total of three monitors. For my two VGA monitors, I am using a DVI to VGA plug, and the Tritton USB. It's been working great for me, and no problems with using extended desktop (as opposed to clone).
Good luck, and let me know if you have any folow-up questions.

Network Save Issue--Can't turn off Protected Mode

So my original problem is one that's been asked here a few times before: when I try to save a document in Acrobat, it makes me save a new version with a different name (so that I have to go back and delete the old version). If I try to just hit "Save," I get the error message: "This document cannot be saved. The file may be read-only, or another user may have it open." I am on a local area network with just one other computer (so I know the document isn't really open), running Windows 7 with Acrobat X. I should also mention that I've checked numerous files and none are read-only.
When this question is asked, it often gets the answer to turn off Adobe's Protected Mode by going to Edit-->Preferences-->General and unchecking Enable Protected Mode at Start-up.
Fair enough.
The problem is, I don't have that check box in my General Preferences menu. It's especially puzzling since I've seen these instructions given to other users with Acrobat X, who have said it worked. Am I missing something? Is there some other option I can chack or uncheck that is equivalent to this? Thanks for your help.

At times there also seem to be some issues with saving to a network link. When this happens, try saving locally and see if that does the job. Try working on the document locally and see if the issue goes away. If so, then you are dealing with a more complex issue involving networks. Unfortunately, I do not have a solution in that case, but it might be helpful to know if that is the issue.

I can't turn off airplane mode

i have an HP laptop with windows 7 and the airplane mode won't turn off. the key pushes in easily but i just cannot get a blue light instead of the red one.......and of course, i can't get connected to the internet.

@ksus ,
Hello and thank you for posting on the HP support forums. So that I can help you better with your issue could you please post back with your full Model and Product Number.
Here is a link that will help you with this.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Here is another link that may be of some help until you post back.
Troubleshooting your wireless network and Internet connection (Windows 7)
I hope to hear back from you soon.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Can't turn off Verbose Mode after running disk defrag in minimal environment using Drive Genius 3

New to posting on here. I'm using a
Mid-2009 15in MacBook Pro
2.8 GHz Intel Core 2 Duo
4 GB memory
After running Disk Defrag in a minimal environment using Drive Genius 3 my MacBook Pro only starts up in Verbose Mode.
I've done my searching on how to turn verbose mode on and off on the web and it gets me nowhere.
Using
sudo nvram –p
in terminal shows that there is no " v" after " boot-args "
Using
sudo nvram boot-args=
to turn it off hasn't done anything.

I'm having the same issue but the solution suggested by prosoft doesn't work because that file des not exist.
Prosoft was able to help me.
First, FileVault is not reccomended and they are adding a FAQ to address that. Next, they said to trash this file:
/Library/Preferences/SystemConfiguration/com.apple.Boot.plist
and to restart. It seemed to have worked for me.
If anyone has any other suggestions then I would be grateful.
Many Thanks.

Can I turn off Silent mode all together

When I go on call I find that out of force of habit (or just plain accident) I will put my phone on silent. Now this can be disasterous if I am callled by work for 24/7 support.
I am looking for a way to do any of these:
1. Can disable the toggle on the side of the phone that switches mode between silent and normal.
2. Can disbale silent alltogether .
3. Allows my phone to ring (with sound and everything) in silent mode.
The do not disturb fuction doesn't help me because an uknown number could call me for support.
Cheers

BrendonD wrote:
1. Can disable the toggle on the side of the phone that switches mode between silent and normal.
No.
2. Can disbale silent alltogether .
No.
3. Allows my phone to ring (with sound and everything) in silent mode.
No.

Officejet 4500 wireless locks up in power saver mode every few days. can I turn off powersaver mode

recently set op for wireless operation with laptop and now leave printer power on all time and unit goes to pwoer saver mode. if in this state for more than a day or two it will lock up and must be unpluged form power sorce to restor operation. how can I correct this problem.

You can't fix it and HP techs say that a fix is in the works, but they have been saying that for over 1 year. Some folks say to depress the 1 key and it works for them, but most folks, including me, say that does not work.
=================================
I am not employed by H-P & I do not look for kudos, just solutions.

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.

TS1875 when trying to turn off compatibility mode on my itunes, i dont have a compatibility tab after right clicking properties. Can any one help

When trying to turn off compatibility mode on my itunes i dont have a compatibility tab after right clicking properties. Can any one help???

Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik

TS1538 how to turn off compatibility mode so my itunes can play..... wont play on windows 8

i have an i phone i downloaded music on my home pc which is vista but can not play on windows 8 on my office pc its says turn off compatibility mode how do i do that?

Refer to this article:
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489

Can the Acrobat SDK be used to turn off protected mode(Sandboxing mode)?

Can the Acrobat SDK be used to turn off protected mode(Sandboxing mode)?

At times there also seem to be some issues with saving to a network link. When this happens, try saving locally and see if that does the job. Try working on the document locally and see if the issue goes away. If so, then you are dealing with a more complex issue involving networks. Unfortunately, I do not have a solution in that case, but it might be helpful to know if that is the issue.

Can someone please tell me how to turn OFF Disk Mode on an Ipod Classic?

Can someone please tell me how to turn OFF Disk Mode on an Ipod Classic

Just Reset it like this
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

I have windows 7 and I can't sign into ITunes. Message says to turn off compatibility mode to use. How and why do I need to do this?

I have Windows 7. I was previously using Windows 98 when I set up ITunes and developed a library of music and movies. When I try to log in I keep getting a message stating that am using an older version of Windows and that I need to turn off "compatability mode to use ITunes. Where and why do I need to do this?

Hi there skinguru,
You may find the information in the article below helpful.
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/ts1489
-Griff W.

Can't turn off offline mode

Similar Messages

Maybe you are looking for