Can't Type the Letter "S" in the Header??

After upgrading from P6 V7 to P6 V8.1, changes made under Page Set up in the header do not remain once the OK button is clicked. It reverts back to the previous header. Also, the letter "S" will not be displayed when typed in the header. Oracle said "This issue is being reported as a bug, but does not have a workaround. It seems to be related to the hot key shortcut to the checkbox for "show section divider lines"." Does anyone have a work around?

At this time this a documented bug within the software please see Bug 12723553: CAN'T SAVE CHANGES MADE TO HEADER/FOOTER OR TYPE THE LETTER S
POTENTIAL WORKAROUNDS:
1. Copy the downloaded dhtmled.ocx and triedit.dll files to this directory
(It will prompt you to accept the copy)
2. Register under admin privileges (Start, Type Command, then right click on
Command Prompt and Run as Administrator)
"regsvr32 c:\program files (x86)\Oracle\Primavera P6\P6
Professional\dhtmled.ocx"

Similar Messages

  • Can't type the letter that comes a_ter the letter e....says active directory domain service is unavailable

    can't type the 6th letter o_ the alphabet......says active domain service is unavailable

    Did you try close and restart Firefox or reboot the computer?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Every time I type a double u (can't type the letter) my computer beeps several times and takes me to Mozilla Firefox Help Page. This is very frustrating to say the least. Please help me fix this problem. Thank You Immensly!!!

    The details are Mozilla Firefox Help takes over my computer every time I type a double u (can't type the actual letter or it takes over and beeps 4-5 times then brings up Mozilla Firefox Help screen

    See:
    *https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

  • 2.1: Can't type the word "MacBU"

    Since upgrading to 2.1, I can't type the word "MacBU" without deleting at least one letter. Every time I try, in any keyboard context, it ends up as "MacBI". No, I'm not just a poor touch-typist (pun not intended): even by sliding my finger from one of the surrounding letters, it skips over the U (and O for that matter, but I can still type "MacBO").
    Other words I can't type: MazBU, MaxBU, MavBU, MamB, but MabBU, ManBU, and Ma?BU work fine where ? is any letter not mentioned above.
    Anyone know what's up with this? Is it some sort of dig at Microsoft? Not funny if so.

    The general issue has come up before. There are certain letter combinations which seem to be a problem. A bug, I guess.
    With this one I found that I could type macBU fine in the To field of an email but I had precisely the issue reported by the OP when I tried to type it in the body of the email. The U comes out as an I and has to be corrected.

  • HT201376 Hello, I am trying to reset my macbook pro to its factory settings but I can't type the name of the formatted disk nor can I click on erase, as this feature is disabled. Could you please assist?

    Hello, I am trying to reset my macbook pro to its factory settings but I can't type the name of the formatted disk nor can I click on erase, as this feature is disabled. The 'type name' space and the 'erase' button are in light grey - Could you please assist?

    Hello!
    Did you boot to the Internet Recovery Partition?
    Here’s how:
    1/ Make sure your computer is completely shut down.
    2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [alt] + [cmd] + [r] Keep these keys on your keyboard pressed until you see a spinning globe with the text “starting Internet Recovery” You might have to connect to your Wi-Fi network before you can continue here.
    After a few minutes, you’ll be presented with a Utilities screen. This is the Internet Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
    3/ Choose Disk Utility and click [continue]

  • Pb with my Mc Book pro OSX version 10.9.5 but can't type the figures (numbers) with the "star" or maj on! Thank you for help

    Hi! I've a pb fom the purchase date with my Mc Book pro OSX version 10.9.5 all updates done but still can't type the figures (numbers) with the "star" for maj on! Thanks if someone can help and give me the link to correct the bugg.
    All the best, Fred in France

    If you have a copy of it backed up, restore that. If not, back up your computer, upgrade it to Mavericks, and then get the current iPhoto version. If you don't have it backed up and don't want to upgrade, go to the Mac App Store main page, click on Support under Quick Links, contact Apple, and see what they say.
    (104007)

  • How can I list the head texts or texts of position of the invoices created

    hello experts
    I have a consultation.
    how can I list the head texts or texts of position of the invoices created in module sap SD?
    Up to now I can see them visualizing the document SD for transaction VF03, but I need to see a listing of invoices and don't unite in one.
    he/she would thank their collaboration.
    greetings,
    Jorge Silva

    Dear Jorge,
    You can use T-Code VF05 or VF05N to generate list of Invoices with range of selection criterias...
    The concerned tables for the same are VBRK & VBRP.
    Let us know should you require any further help..
    Hope this helps...
    Give points if useful..
    Thanks,
    Jignesh Mehta

  • I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user.  Among the surprises:
    - it strips out images from headers and footers without warning
    - it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
    - it strips out alternating left/right margins, without warning.
    There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
    -mail merge
    -meaningful Applescript/Services support
    -non-contiguous text selection
    -ability to set defaul zoom
    -ability to see comments while editing
    -ability to print comments
    -ability to read RTF files
    -ability to drag in hyperlinked ted from a browser
    These about about 90 other features are gone.
    Then there are the bugs.  Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers.  Many reports of the program crashing, courrupting files, etc.
    Fortunately for you, the previous version of Pages is still on your system.  Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!).  Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set.

  • I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo.

    I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo. Is it possible to simply delete this blue color of the sky?

    Make your selection and then use Refine Edge.
    See this video tutorial from Bob Gager.
    https://www.youtube.com/watch?v=xrl3Qwg6zSc

  • How can I see the heading of a column, whilst at the bottom of a document?

    I'm doing a long list of expenses, and the headings are at the top of columns. Now I've filled in many rows, I have to go up and down the page to see the heading make sure that I fill the correct column in. Is there a way of splitting a document across the middle (or something like this) so that I can always see the heading at the top of the column even though i am way down the page?
    thanks so much - Nigel

    Hello
    There is a really simple workaround
    Duplicate your table and, in the copy, remove every rows minus row 1 thru 7.
    You will be able to leave the new table (name it "header7" for instance) at the top of your screen
    and put the main one just under it.
    Doing that, you will be able to scroll in the main table.
    If the contents of the seven top rows may be modified.
    Replace the contents of the cells in header7 by a formula looking like that:
    A1 =mainTable :: A1
    So the changes in row 1 thru 7 in mainTable will be reported in header7.
    Yvan KOENIG (from FRANCE lundi 7 janvier 2008 18:31:14)

  • When I open an email on my phone I can only see the header

    When I open an email on my phone I can only see the header & subject, not the content of the message

    Reset your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release.

  • Can't type the word "couldn't"

    I recently started using pages 09 and turned on the autocorrect feature, which most of the time accurately changes mispelling to correct words. Unfortunately, as a type the word 'couldn't', when I get to "couldn" and then type the apostrophe ('), the program deletes the 'n', so what should be "couldn'" turns into "could'". If I leave a space, then go back and correct it (the way to prevent the autocorrect from working) the spell check doesn't have problem with couldn't, but the problem is that it won't let me type it. Is this a glitch in the autocorrect feature, or is there something I am missing? Thanks.

    KOENIG Yvan wrote:
    The Guide describes correctly the behavior of 10.4 (spell checker is not an application's tool but a system's one.
    As far as I know, "Unlearn Spelling" which is available under 10.4.11 (in every applications), is unavailable under Leopard (in every applications).
    Right-click or control-click on a bad word, and you will get the unlearn option. Example:
    Type "helllo". Go to the spelling dialogue and add the word to the dictionary.
    Close the spelling dialogue.
    Right-click or control click on the word "helllo" in a document, and you should see the unlearn option.

  • How do I do , if I can not type the word on my iPad ?

    I can not type my iPad , when I type , it takes long by one word. So how do I do ?

    On your iPad you have Inboxes above and Accounts below.  Open the mailbox from the Accounts section and you'll see the trash folder.  Touch Edit and then the message you want to move.  Once you've touched it you'll see the option to move it and touch Move and then you'll see the options of where you can place it, like in a folder, or Inbox, etc.

  • How can I type the symbol for greater than or equal to

    I wish to type the symbol for greater than or equal to in an equation but my keyboard does not have such a symbol

    Mathematical Operators - 2200-22FF
    :≥ &nbsp; &nbsp; &amp;#x2265; 8805 GREATER-THAN OR EQUAL TO
    :http://www.sql-und-xml.de/unicode-database/mathematical-operators.html
    If this is for HTML use &amp;ge; to create &ge;
    you can bring up CharMap (charmap.exe)
    go down 11 windows (of 10 rows each) and it is on bottom row
    You should be able to type as Alt+8805 on the Numeric keypad (not number row)
    or on laptop with NumLock off as Fn+Alt+8805
    but that is not working for me and I verified that hex(x2265) and decimal (8805)
    values are equivalent.

  • I want to enter a user name to reset my router and a password appeares and i can not type the correct one without the user name changing buy it's self

    I pick a blank window and type http://192.168.15.1 press enter
    This take me yo a log in window to change my motorola router.
    A screen appears to enter a user and pass word.
    There are both supposed to be "router"
    Defaults want to enter ROUter as user name and pass word and I cAN NOT OVER RIDE THEM. HELP

    Yes, but the method is to simply connect the TC to the computer by ethernet and use it on a separate network. That is the best way to do it.. but you can also do the same thing better and easier with an external hard disk plugged in. For a desktop computer this is a better solution in a way. You will only be using the TC for Time Machine backups anyway.
    If you want to continue to use the TC.. then the actual network settings I put in this thread with a whole series of pictures.
    https://discussions.apple.com/thread/4817218?tstart=30
    If you cannot follow any of that just ask.

Maybe you are looking for

  • Is it possible to install kde 4.8b1 from binary?

    I've been on a mac for ages and have really grown out of love with it.  The KDE 4.9b1 announcement got me moist and thinking again about moving all my computers to linux. I was wondering what the easiest way to install KDE 4.9b1 would be?  I'm not a

  • How we can restrict record in CTL file on the basis of other table ?

    Hello all, How we can restrict record in CTL file on the basis of other table ? Eg. I have following control file to load the records in the table through the sql loader. LOAD DATA INTO TABLE THIST APPEND FIELDS TERMINATED BY "|" TRAILING NULLCOLS LN

  • DNS querier

    please help me in creating a DNS query program to display the resource records it returns

  • Problem with SP with table parameters

    Hello, I have problem with stored procedure with paramater which is table type. I have defined my own type CREATE OR REPLACE TYPE STRING_LST AS TABLE OF VARCHAR2(80); and i have stored procedure like this   PROCEDURE probe(outList OUT STRING_LST) IS 

  • Creating a Proof Book

    Is there a way to create a Proof Book in PSCS3? or will I need Lightroom?