Can't un mute sound

I just went through re-sizing issues, with restarts and now it's ok but the volume is muted and in System Pref Sound the mute is checked and grayed out so I can't uncheck it. Why and How do I fix this?
thanks

Check your System Profiler. What does it show under "Available Devices?" Also, what happens if you log into another User account?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Similar Messages

  • I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up

    I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up. Any ideas?

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers.
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • Lost all sounds on Imac can not deselect mute all computer sounds

    I can not deselect mute all computer sounds on my Imac with Lion I went into preference and for output the only thing I can select is headphones is there away to get the built in speakers back on this drop down list?

    Hello, long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back

  • Using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

    using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

    Uh .... Yes you can. You just have to understand how the whole thing works.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Can't uncheck mute mac OS 10.8 book pro

    this has happened on the first awaking from sleep after installing 10.8
    the f 10 key that mutes and unmutes sound has become stuck in the muted condition hitting it just shows the large sound level icon with the diagonal line through it but greyed out hitting the f12 key removes the large diagonal slash and shows full volume but greyed out and the small circle with diagonal slash is seen at the bottom centre of these large soundlevel control icons
    the control in the menu bar is also greyed out and can not be adjusted from its bottom position.
    the sound system preference shows out put volume at full but the the mute box is checked and grey and can not be unchecked.
    sound was working after the install as I was playing with the improved text to speach voices...
    the problem cropped up after awaking from sleep
    all other functions seem to be OK
    anything else I should try? ( I did a search here and found reports going back to 2006 here but they seem to centre on faulty headphone jacks and I have never used anything but the builtin speakers on this MBP)
    Hardware Overview:
      Model Name:          MacBook Pro 15" mid 2009
      Model Identifier:          MacBookPro5,3
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.8 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP53.00AC.B03
      SMC Version (system):          1.48f2
    System Software Overview:
      System Version:          OS X 10.8 (12A269)
      Kernel Version:          Darwin 12.0.0
      Boot Volume:          Macintosh HD

    ok as found elsewhere in these forums this is fixed by a full shutdown
    power off and a fresh power on start
    a restart selection from the apple menu did not work to fix it if it happens again after waking from sleep mode I will update this thread

  • HT5858 In the control center I can change the mute or the rotation but not both.  How do I fix this.  In settings I can not uncheck both the mute and rotation lock.

    In the control center I can change the mute or the rotation but not both.  In the settings area therefore I can't uncheck the mute and rotation settings at the same time.

    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
     Cheers, Tom

  • I can t get any sound notication sounds on my ipad 2 such as new email etc

    I can t get any sound notication sounds on my ipad 2 such as new email etc

    You need to turn off the mute.  The side switch is the key.  Depending on your settings, it may affect the mute or it may affect the rotation lock.  This support article from Apple provides detail.
    http://support.apple.com/kb/HT4085
    In case you're wondering, here is the history.  Originally, the mechanical switch affected only the rotation lock and the mute was a software switch elsewhere.  In IOS-3, it was changed to be the mute switch and the rotation lock became a software switch.  This was done to ensure consistency among IOS devices.  Unfortunately, a large quantity of users complained loudly, alleging that they turned the rotation lock on and off several times every hour and the convenience of the mechanical switch is essential.  In IOS-4, Apple bowed to the whiners and made the switch function selectable and now we're stuck with a mess.
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • How to Mute Sound in Camera

    Hi I am using camera class to show atteched camera output in
    swf file.
    I dont need sound to play.
    Can any one help me to MUTE sound comming from microphone.
    Thanks
    Shikhar

    11-Sep-2008 10:13 AM
    sarawirda wrote:
    Yes, I agree but sometimes in certain situation, i need it to be mute, like when to snap picture in some quite place. I tried off the warning tones but the n82 camera sound still can be heard.
    In that case I'm afraid you're out of luck. Your N82 was obviously intended for a region where the camera must make a noise.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • I can't hear alert sounds

    I can't hear alert sounds, keyboard clicks, and sounds from some Apps.  I can hear sound on YouTube.  I've checked the sound button on the side and the sound settings.  Mute is not on and the volume is at the max.

    Understanding the side switch
    http://support.apple.com/kb/HT4085

  • Says I can't import recorded sound into iMovie because I the files don't have iLife preview

    Hi,
    I am trying to either record sound directly onto iMovie to use as a voiceover or record on Garageband and then import it to iMovie. I have not found a way to record on iMovie, so I was trying to do it on garageband, but when I try to open the file on iMovie, it says I can not because it does not have iLife preview. I have a new Macbook Pro with Retina Display.
    Thank you!

    Hi avalewinter,
    Welcome to the Apple Support Communities!
    I understand that you would like to record a voiceover directly in iMovie. To accomplish this, please use the instructions located in the attached article.
    iMovie (2013): Add audio and music
    Record a voiceover
    You can record your own narration to add to your movie.
    Position the playhead where you want to start recording in the timeline, and choose Window > Record Voiceover.The voiceover recording controls appear below the viewer.
    To adjust the recording settings, do any of the following:
    To change the input device: Click the Voiceover Options button, and choose an option from the Input Source pop-up menu.
    To adjust the input level of the microphone: Click the Voiceover Options button, and drag the Volume slider right to increase the volume of what is being recorded, or left to decrease it. You can monitor the audio levels by using the built-in audio meter on the Record button. You should set the volume so that the audio meter in the microphone (the Record button) stays green, even when your voice is at its loudest.
    To mute sound from other clips while recording: Click the Voiceover Options button, and select the Mute Project checkbox.
    To start recording, click the Record button.
    To stop recording, click the Record button again (or press the Space bar).The recorded audio appears as a new clip in the timeline, above the background music. The voiceover clip is attached to the clip that was below the playhead when the recording was started. The track is named VO: Movie Name - Date, where “Movie Name” is the name of your movie, and “Date” is the date of the recording.
    Click the close button to dismiss the voiceover recording controls.
    Best regards,
    Joe

  • How can I restore the sound on my ipad

    How can I restore the sound on my ipad please?
    I have know idea what happened to it but I am disabled
    and rely on it so much because it is so easy to carry around.
    Please advise me how to restore it. I miss listening to my music
    so much.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Recently, I can't get any sound from my game applications.  Sound works fine with video, streaming, etc, but not my game applications.  I've tried powering down and re-booting, but the sound does not return.  Can anyone help me?

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

  • How to mute sound for app?

    Is there a way to mute sound for one particular app? In windows, you can do this from the volume control. It list each app and you can control volume there. I don't see a way to do this in Windows.
    Particularly in gotomeeting, there isn't any mute available. Safari is the same way.

    Hijack Safai with Audio Hijack Pro
    <http://www.rogueamoeba.com/audiohijackpro/>
    and use the Mute button. You can get by with the free version for just muting.

  • I can not hear the sound on my I phone 3GS.

    I can't hear the sound on my phone. I have reset it and everything. When you press the sound button to raise the volume, nothing goes up. I can plug earphones and it workes but otherwise, it does not. What can I do?

    Hello Dexter1954
    Check the side switch on your iPad to ensure that it has not put the iPad on mute. Check out the article below for more information.
    iPad: Understanding the side switch
    http://support.apple.com/kb/ht4085
    Regards,
    -Norm G.

  • HT204291 Why I can' t hear the sound from my games while I am playing?

    Why I can't here the sound when I am playing a game?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

Maybe you are looking for

  • EWT - giving validity period based on withholding tax code

    Dear Friends, 1) My client is having different withholding tax codes (based on rates) for the same withholding tax type. I have given validity period based on withholding tax type in EWT -> Company code -> Assign withholding tax types to company code

  • Download all files from a specific application server directory to Local pc

    Hi Experts, I have a requirement of downloading all the files from an application server directory to a local pc. I know how to download a single file from an application server at a time provided the file name is known. But my requirement is to down

  • Miro for delivery cost

    Hi Experts, In miro when logistic invoice is booked for goods/service there is a link with GR document. Ref doc field gets updated with GR mat doc also the delivery note field gets populated. But when logistic invoice is booked for delivery cost no l

  • Punch-out Catalog Management

    Hi all, I wanted purchase a materiale from an external site, so I selected "Supplier Catalog" link, I connected to Supplier web site, I selected an item and when I clicked "Choeck" button, I saw the folloing error message:"Indicate a valid contract(P

  • Capital One has no record of application

    I cold apped for Venture and Venture One last night within a few minutes. Both went to the 7-10 days status. Today I called the status check phone line and the automated status could not find any application with my social. When transferred to a repr