Can't un-mute tracks

I'm using Logic together with an MC-808.
Every so often tracks become muted and I can't un-mute them.
Has anybody else had this problem with external instruments?

ok. It good to know I'm not the only one with this problem. The work around at the moment for me is to duplicate all the midi tracks so I have a "spare" just in case a track decides to mute itself!!

Similar Messages

How can I check on the delivery of an photo but that I created and sent to a friend. I have the order number but I can't find the tracking information.

How can I check on the delivery of a photo book that I created and sent to a friend. I have the order number but I can't find the tracking information.

I can't check mute or thru in audio midi setup!

Hi all!
I'm new so thanks for checking out my post. My issue is in regards to a problem with my audio preferences. I can't check "mute" or "thru" on my audio preferences (in audio/midi setup) for the line in and internal mic. I think they are leading to problems in logic with audio being recorded as bleed.
Core Audio will not allow line in to be turned down past -4.00 db. This leading to all kinds of problems. Thanks for any thought!

Many audio audio input devices do not support Mute or Thru. Any recording applications should have ways of selecting the audio inputs to use, other than just reducing the levels of unwanted inputs.

ITunes can't play all tracks on a cd

I have a brand new Dell XPS 730 gaming pc. Previously, I was running Vista 32 bit that it came with. The other day I reinstalled Vista 64 bit and installed itunes for 64 bit vista. When I put in either regular audio cds or burned cds, itunes will only recognize a few tracks and just skip the rest. When trying to import a track it skips over it takes about one second and it sees it as being like hundreds of hours long. I tried multiple cd's that work PERFECTLY FINE in a cd player on my boombox. I also then tried these in Windows Media Player 11 and the same exact issue occurred. WMP gave an error message saying there was something wrong with my drive. I have two DVD-RW drives. I tried this all on both drives and same issue happened. I find it hard to believe that in the span of a day both of my drives had something go wrong with them that they can't read discs properly, especially when I can play any DVD games fine and can burn discs using my Roxio burning program perfectly fine as well.
I don't understand why the same problem would be happening in WMP if it was a problem with itunes. I'm guessing it could be an issue with Vista 64 bit not working properly with the DVD drives, i'm not too sure. I just find it odd that this problem would crop up when my pc was working fine in 32 bit with iTunes. Anyone else having this problem, and anyone actually found a solution to it yet?
Below is the diagnostic I ran with a regular audio cd in each drive that work fine on my boombox cd player. It's definitely not recognizing them properly as you can see in the track times of like 20 hours plus when they're only 4 to 6 minutes long.
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 1 (Build 6001)
Dell Inc. XPS 730
iTunes 8.1.1.10
QuickTime 7.6
FairPlay 1.3.6
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.4.1.7
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 567794B6885C5B66
Current user is an administrator.
The current local date and time is 2009-05-08 11:51:23.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce GTX 280
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {2F8AE457-F134-4CF6-9214-7B2B28B419A9}
Description: NVIDIA nForce Networking Controller #2
IP Address:
Subnet Mask:
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Fri May 08 11:07:17 2009
Lease Expires: Sat May 09 11:07:17 2009
DNS Servers:
Adapter Name: {1A2D65CC-E31A-4A2D-AB99-B76BECC38CCE}
Description: NVIDIA nForce Networking Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2009-05-07 21:00:02.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.1.0.1),
E: HL-DT-ST DVD+-RW GH30N, Rev A102
Drive is empty.
E: HL-DT-ST DVD+-RW GH30N, Rev A102
Audio CD in drive.
Found 16 songs on CD, playing time 77:32 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 06:36:04
Track 3, start time 10:12:05
Track 4, start time 15:37:08
Track 5, start time 20:08:64
Track 6, start time 24:15:45
Track 7, start time 29:45:00
Track 8, start time 35:31:15
Track 9, start time 40:38:02
Track 10, start time 46:35:02
Track 11, start time 50:42:16
Track 12, start time 55:27:16
Track 13, start time 59:14:50
Track 14, start time 65:51:02
Track 15, start time 69:34:16
Track 16, start time 73:05:46
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
D: TSSTcorp DVD-ROM TS-H353B, Rev D500
Audio CD in drive.
Found 10 songs on CD, playing time 54:58 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 00:43:53
Track 3, start time 06:38:73
Track 4, start time 13:21:57
Track 5, start time 18:41:21
Track 6, start time 24:44:20
Track 7, start time 29:32:61
Track 8, start time 35:47:27
Track 9, start time 40:35:71
Track 10, start time 45:00:45
Audio CD reading succeeded.
Get drive speed succeeded.
** iPod/iPhone Connectivity Tests **
iPodService 8.1.1.10 is currently running.
iTunesHelper 8.1.1.10 is currently running.
Apple Mobile Device service 2.12.36.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

I have a similar issue, pleae let me know if you've figured this out.
On mine, it will play approx 1 minute of an audio CD, then quit. Will not play subsequent tracks at all, and skips them as you describe when trying to import. Same result in iTunes and Windows Media player. But I was able to play a DVD movie and also to burn a copy of a CD. Very odd.

ITunes can't find my tracks - please please help, DJ in need to urgent fix!

iTunes cannot find my tracks which have been working fine on my external HDD for a long time. Basically today I have tried to move my library from one external HD to another (due to portability issues) I changed my iTunes media folder location in the preferences to the new drive, and then consolidated my library in order to copy all of the tracks...when I opened up the new library on the new HDD the files could not be found. So I simply decided to change the media folder library back to its old location again so that I could just load up my initial library and go about copying my library in a different way... however, when I went back to the old library location which should not have changed at all, it was also unable to find 99% of the files!
Please help. I cannot recreate my library from scratch as I have 10000 tracks, most of which which are all sorted out into different playlists ready for DJing. The tracks are still on the HDD and I can find them individually, but this is obviously out of the question for such a large library of tracks. Please can someone enlighten me as to how can I relocate them without reconstructing the library?? Thanks very much, i'm pulling my hair out right now with stress!!!

Hey thanks very much for your reply. The original folder was still the H drive because I was trying to move from one exHD to another (one which is much more portable) Also the media folder location definitely shows the correct location of all the tracks. The new library did not work properly so I went back to my old drive in order to try again and follow a guide online so that it would 100% work correctly. However, when going back to the old drive I experienced the problems, so now my main (old) library is not working.
I think the problem lies somewhere along these lines - If you look at the picture closely you can see that the tracks file name is different for some reason before and after manual relocation...
So in the picture above it's originally trying to find the file "02 Serial Killa" and failing. However, after manual location it has realised the file is called "B Shackles - Serial Killa" so for some reason its searching for the wrong filename (I think!?)
Any help will be massively appreciated!! Thanks
Message was edited by: scratchley

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

Can i use a track pad and mouse at the same time

can i use a track pad and a mouse at the same time

If you mean can you have them both connected at the same time, then it's a yes. I have both connected and use the mouse for some functions and the trackpad for others... works a charm.

HT5858 In the control center I can change the mute or the rotation but not both. How do I fix this. In settings I can not uncheck both the mute and rotation lock.

In the control center I can change the mute or the rotation but not both. In the settings area therefore I can't uncheck the mute and rotation settings at the same time.

Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
 Cheers, Tom

TS4006 How can I find or track my iPad mini when it keeps showing offline on the find my iPhone app?

How can I find or track my iPad mini when it keeps showing offline on the find my iPhone app?

You can't. If its offline it can't be tracked. The device needs to be powered on and connected to an Internet connection to be trackable.

Can a third person track on messages and calls sent/received through apple id

can a third person track on messages and calls sent/received through apple id

You're welcome.
If you think this is happening to you, change your Apple ID password.

Why Can't I Import Track 10 from my Music Library?

I have 350 albums in my computer music library and I can't import any track 10 song from an album to iTunes. The message I get is: "The file 10 <Whatever Song Name>.wma cannot be imported because it does not appear to be a valid exported file." This happens on every track 10 title in my library and on one track 1 title that is 14 minutes long. Help!

I am a PC user, but this may help you??:
I am having the same problem with track 10 on two Springsteen CDs that would not play in my desktop PC (one was a dual dvd, the other a regular CD). So first, to get them to work, I had to find a source (my laptop) that would "see" the CD. Then I ripped to Windows Media, then copied onto an external hard drive, then imported into iTUnes.
Everything went well until track 10 on both (After that, the rest of the tracks imported okay on one CD, and then on the other track 11 had a problem, but the rest ok).I found a posting (see below for the link) and it solved the problem on track 10 on both (basically I changed the track# to another number else in the Properties/ Summary/ Advanced section). However it didn't work for that one track 11. So if anyone has ideas on that, I'd appreciate it. I tried fiddling with all the differnt categories in Summary (track name, album name, etc) and rename the song itself, removing the number, but to no avail. Here is the posting that I found the solution on
http://www.howardforums.com/archive/topic/1077261-1.html

The log file which can be used to track the HTML preview of HFR Reports

Hi,
Could you please let me know the log file which can be used to track the HTML preview of HFR Reports?
Thanks,
Aparna

You could check the FinancialReporting0.log and FRLogging.log .You could refer the same in the
" http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_11121.pdf" page 47.

Can I set a track from iTunes as my ringtone?

Can I set a track from iTunes as my ringtone?

You can make a ringtone out of a song that:
1) is or was purchased from itunes
2) has a ringtone icon
Once you have the itunes purchased song in your library and it has the bell icon, then click on the bell icon. Then edit the song to the portion and length of the clip you want to use.
Then select buy( it will cost 99 cents in addition to the original cost of purchasing the song from itunes). It will show up in your ringtones heading in itunes. When you sync, it will be on your iphone.

HT2375 Hi I can't play back track from the middle of a software track

Hi I can't play back track from the middle of a software track, and hear what I have played.

MarsDaretoDream wrote:
Hi I can't play back track from the middle of a software track, and hear what I have played.
For this you need to look at chase functions. Project settings>Midi>Chase button

A script that can be used to track text content changes in indesign?

Is there a possibility a script that can be used to track text content changes in indesign. My Indesign software's version is CS3. As you can see below, I have deleted some texts and added some. I did it in another software.
I have been searched for a long time. Because of my poor English, I still can't come up with any Object Model related to the script yet.
Here is some idea of mine:
Use the script tracking my revising texts. When I add some new texts, the texts will be underlined. When I delete some texts, the position of the first character of the removed text will be added a small red triangle or something.
Thanks in advance.

Hidden dragon, what does that mean?
I can't comprehend fully what you said.
Is IDML short for Indeisgn Markup Language?
I think you are telling me that I can open the Indeisgn document by using the software InCopy. Then I have change some contents. InCopy will help me tracking the revision.
getZinger. Do I get your point?

Can't un-mute tracks

Similar Messages

Maybe you are looking for