CAN'T UNINSTALL ALL FILES WITH WINDOWS

In trying to move Photoshop Album 2 Starter Edition from my "C" drive to my "D" drive it became corrupted and the Uninstall file became disconnected from the program. I downloaded it from the web again and was able to use the Windows XP uninstall to remove it. But, after doing so I ran a search of my computer and found the following two files still on my "C" drive: Adobe Photoshop Album 2.0 Starter Edition and Adobe Photoshop Album 2.0 Starter Edition.msi. When I click on the program file I get an error dialog box noting:"Photoshop Album cannot start or continue because of missing file(s). Please reinstall."
The second (.msi) file appears to be an installer file located in: "C\WINDOWS\Downloaded Installations\{30F65707-62BC-4443-BB21-86DA6E7F8A55}"
My question is: can I simply click on delete for these two files or do I have to go into the registry to remove either of these. And, if so, which registry keys do I need to change/remove?
Now that there is a Photoshop Album 3.0 Starter Edition, I want to download and install it, but on my "D" drive.
If anyone can help me figure this out I would greatly appreciate it.

Hi,
Uninstalling software does not always remove all the files from the system, Decent software manufactures often inform you that not all files have been removed, and suggest that they can be deleted via Windows Explorer.
If these "left behind" files are non executionable, that is, they don't start the application, then there will be no problem sending them to the recycling bin.
Jeff

Similar Messages

Can't scan all files with avast prior to migrate

HI all, Finally am replacing my 08 macbook pro with a 2014 model. Have not booted the new one yet. Wanted to make sure that my transfer of files on source computer did not move over any infected files that couldn't be scanned under Avast. When I ran my last scan on the 08 source computer, it mentioned it was unable to scan 170 files. I went to the avast site and it suggested these types of files are usually password protected. I don't want to migrate any "infected" files that perhaps may lie in the unscanned group. Any suggestions?

Hi,
Uninstalling software does not always remove all the files from the system, Decent software manufactures often inform you that not all files have been removed, and suggest that they can be deleted via Windows Explorer.
If these "left behind" files are non executionable, that is, they don't start the application, then there will be no problem sending them to the recycling bin.
Jeff

I can register an OCX file in Windows 7 x64 without incident but with Windows 7 x32 I get a p-up that says "DllRegisterServer failed with error code: 0x80004005. What gives???

Hey yeah. not much else to say. The title says it all.
I'm trying to register an OCX file that my video editing application requires to work properly.
I'm using a Registry (Regsvr32 and Regsvr64) tool to Register DLL/OCX files. Both bit Registry tools work fine. I can Register any DLL or OCX file with Windows 7 x64 and everything goes smoothly.
But, when in Windows 7 x32, again, no problem with merging the Regsvr32 tool, but when I go to register the OCX file message says it was loaded but the DllRegisterServer failed with error: 0x80004005.
Why does everything work in Windows 7 RC 7100 x64 but not in Windows 7 RC 7100 x32???GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

I don't know what happened.
My Video Editing software was working fine a few days ago in Windows 7 x64. Tried using it this morning....couldn't load the .mpg video clip. Just stood there looking stupid like it does in the 32-bit version of Windows 7.
I was hoping the x64 version of Windows 7 RC 7100 was going to make a decent run against my XP Pro SP3 setup. When I was able to register the required .ocx file for the video editing application, I thought "cool". I made a TV recording then used the Video Editor to edit it and it worked fine. Earlier this morinng I made another TV recording, went to go edit it and the video editing application couldn't load the .mpg file at all. This problem just annihilated any chance of me ever purchasing Windows 7, 32 or 64-bit.GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates

I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates. What to do?

Many thanks!!! This works and is probably the best fix for now. Thank you!!!
Date: Wed, 30 Jan 2013 10:58:01 -0800
From: [email protected]
To: [email protected]
Subject: I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates
    Re: I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates
    created by 99jon in Photoshop Elements - View the full discussion
For the D600 NEF's you have two alternatives: (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software) Windows download click here DNG Converter 7.3 Mac download click here DNG Converter 7.3 You can convert a whole folder of raw images in one click. See this quick video tutorial: You Tube click here for DNG Converter tutorial
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5034913#5034913
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5034913#5034913
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5034913#5034913. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can I print a file with mixed page orientation in windows 8.1?

I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc

ส่งจาก จดหมายของ Windows
จาก: Pat Willener
ส่งเมื่อ: จ. 5 มกราคม 2558 6:15
ถึง: thang dinhvan
How can I print a file with mixed page orientation in windows 8.1?
reply from Pat Willener in Adobe Reader Touch for Windows 8 - View the full discussion
I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7064031#7064031 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7064031#7064031
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I can't open PDF files with adobe flash player

I have installed it and whenever I try to open pdf files it says I need to agree with your liscens and you do that automatically when you download it. I have followed all your instructions on your website and uninstalled it and installed again, but I can't open pdf files with it. I don't know what the problem is exactly, but it's really frustrating..

Flash Player CANNOT open PDFs because they AREN'T Flash Documents.
Adobe Reader opens PDFs.
To accept the license agreement (NOT the one you accepted to download or install - the one for USE)
Windows:
Go to: C/Program Files(x86)/Adobe/Reader 11.0/Reader and double click the eula.exe file. The license agreement will open for you to accept.
Mac:
Go to: Mac HD/Applications and double click the Reader app. The license agreement will open THE FIRST TIME you open it.

Can't open PDF files from Windows Explorer on Windows 8.1

Hello,
after I've upgraded to Windows 8.1, I can't open PDF files from Windows Explorer (directly double clicking the file). The AcroRd32.exe runs in the background (2x !) as I see the processes in task manager, but there is no user interface visible. I have Acrobat
Reader 11.0.06, the desktop version (not Metro). I tried uninstalling the Acrobat reader and installing it again but this didn't help. The only way to open PDF files is to close the AcroRd32.exe from the task manager, open empty Acrobat Reader from the desktop
and then drag&drop the PDF file over that window. This is quite inconvenient. Is there a way to fix this issue so I can open PDF files directly from windows explorer?
Many thanks!

I had to install adobe reader, but PDF's used to display just fine with IE, any idea what happened ?
Windows 8.1 pro.
thx
lee

I can't open pps files with FF4. I have Powerpoint Viewer installedAny suggestions?

I can open Powerpoint (pps) files with Google Chrome but not Firefox 4. How do I get FF4 to associate pps files with the Powerpoint Viewer that is installed on my computer?

Many thanks!!! This works and is probably the best fix for now. Thank you!!!
Date: Wed, 30 Jan 2013 10:58:01 -0800
From: [email protected]
To: [email protected]
Subject: I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates
    Re: I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates
    created by 99jon in Photoshop Elements - View the full discussion
For the D600 NEF's you have two alternatives: (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software) Windows download click here DNG Converter 7.3 Mac download click here DNG Converter 7.3 You can convert a whole folder of raw images in one click. See this quick video tutorial: You Tube click here for DNG Converter tutorial
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5034913#5034913
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5034913#5034913
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5034913#5034913. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I am having problems importing some CDs into iTunes on a laptop with Windows 8. Most CDs import without problem. The ones I can't import can be imported into iTunes with Windows 7. Does anybody know why this problem is occurring?

I am having problems importing some CDs into iTunes on a laptop with Windows 8. Most CDs import without problem. The ones I can't import can be imported into iTunes with Windows 7. Does anybody know why this problem is occurring?

First-off, this seems to be a general problem with 10.4 (across all the operating systems of which I am aware). Unfortunately, I cannot provide a permanent solution but, if you need a quick fix, this will (hopefully) work for you.
For some inexplicable reason, iTunes no longer recognises standard Windows paths. For example:
Y:\Music\Buddy Holly\Buddy Holly - Rave On.mp3
The end result is that it will import a playlist with no content.
It will, however, recognise the equivalent Apple paths which look like this:
file://localhost/Y:/Buddy Holly/Buddy Holly - Rave On.mp3
It is possible to convert your existing playlists using a few basic replace commands in something like Notepad. In my case, I made some code changes in my music manager and now generate two sets of playslists (one standard and one to accommodate iTunes).
Forgive me foir stating the obvious but please remember to make sure that the disk / path containing your music is accessible when doing the import otherwise you will probably get a blank result. Note that you can do a bulk import by selecting all the (revised) playlists and dragging them onto the iTunes sidebar.
I am sorry that this is not a "clean" solution but it will work if you are in a bind. The only alternative of which I am aware is to wait for Apple to fix the problem.

Retrieving Time Machine Files with Windows or Other Mac

Hi everyone. I'm using a MacBook 4,1 running 10.6.8 and I also have an external hard drive in order to use Time Machine for backup.
If my MacBook dies then all I'm left with is the aforementioned external drive. However since my files have been backed up via Time Machine – and not the usual copy/paste method – what happens then? Do I need to buy a new Mac or is it possible to retrieve those files with a computer running Windows?
Please keep in mind that I only have one account – the administrator one – which is password protected, requested at login. In case I can't possibly retrieve them with Windows and I buy a new Mac, will the fact that they are password protected be a problem and prevent me from accessing them?
I can't possibly try it out myself because I don't have any other Mac or Windows computer/laptop.
Any insight is more than welcome. Thank you for your time.

If my current MacBook stops working and I get to buy a new Mac, is it possible to choose individual files (like iTunes libraries only, or pictures folders etc.) from my current Time Machine backup on my external HD and move them to my new Mac, instead of loading my entire backup on to the new one? (including system files and other files that I don't really need).
Pretty much how one might use Time Machine, where you browse backups by date, find the folders and files that you want and restore them back. You don't restore the entire backup.

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a soluti

My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but when reinstalling I get an older version is installed and cannot be removed. I need a solution.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Time capsule intern.1TB hard drive.How can I delete all files

Hello How can I delete all files from my timecapsule.
I have connectet it with Wifi or ethernet. It is not possible.
I have made a reset.
I have tried it often.
Please help
Greetings from Vienna
Pepimeier

If you open Macintosh HD > Applications > Utiltiies > AirPort Utility and click Manual Setup, are you able to access the settings for the Time Capsule?
Or, does AirPort Utility scan for the Time Capsule and then not find it?

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

Mail window may be in the Full Screen mode.
Move the mouse pointer to the top right corner of the Mail window and hold it there.
Menu bar should drop down and click the blue double arrow icon.
Full Screen toggle shortcut: control + command + F

Can't i exchange files with bluetooth blackberry

Why can't i exchange files with bluetooth blackberry i am getting a error message saying " cannot connect the device"

Hello,
Please provide the exact steps you are conducting, on both devices, in the exact order you are making the attempt. Also, are both devices BBs? Further, please provide the exact OS level (all 4 octets please) of the BB's that are involved in the attempt.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I export a file with transparent background?

Hi all,
I know InDesign doesn't allow to export a PNG file, but I need my file to be in image file format with transparent background.
I'm still learning so I am stuck here. How can I export a file with transparent background?

If you can't get the PNG file export to work, you can export a pdf and open it in Photoshop, from there you can save it as whatever you like.

CAN'T UNINSTALL ALL FILES WITH WINDOWS

Similar Messages

Maybe you are looking for