Can't uninstall cs3 because my drive crashed

Hi
I installed cs3 to my second drive D:/ and now that drive crashed so I can't uninstall it. I can't install it on C:/ either. I get an error message when i try. I have tried CS3cleanscript but it didn't work. Please help

Vista 64, error msg:
Scripterror in Internet Explorer
An error has occured on this page
Line: 532
Error: Thrown and not caught
Code: 0
URL: C:\Program Files (x86)\Common Files\Adobe\Installers\4dcfd9b7e901b57f81f667144603236\resources\main.html
Do you want to continue run script on this page?
[ Yes ] [ No ]
Then nothing happens when i press yer or no.
I tried level 1 on CS3script.

Similar Messages

  • I uninstalled logic because it kept crashing. But when i try to reinstall it get to the 3rd disk and says it couldn't be installed. Does anyone know of any reasons this might be?

    I uninstalled logic because it kept crashing. But when i try to reinstall it get to the 3rd disk and says it couldn't be installed. Does anyone know of any reasons this might be?

    Ben Rush
       Also tried restoring system from backup but just does the same thing
    This is where a HD clone is so important, ...
    Time Machine can do nothing with/to a crashed / failing HD. 
    Like refilling a gumball machine with a hole in the bottom, ....futile.
    At least your vital data is backed up. Look into getting a new internal HD. Very cheap fix $65 for a new HD.
    If you have Apple care on your 2011 macbook, contact them for repair/ HD replacement.

  • Can't uninstall CS3 after installing CS4

    After I got CS4 installed and working ok, I tried to uninstall CS3. A dialog window showed two components that could be uninstalled; CS3 and Shared components. Both were checked and grayed out so that I could not uncheck Shared components. How can I uninstall CS3?

    Thanks, I spoke to Adobe and they said that all I had to do was be patient. The uninstall took about 40 minutes, and it was quite a while before the progress bar budged.

  • I uninstalled Safari because it kept crashing and cannot find where to get a new installation. Do I have to reinstall Lion?and cannot find

    I uninstalled Safari because it kept crashing and cannot find where to get a new installation.

    There's no official download - the simplest thing is to reinstall via Recovery. That's only a problem if downloading 4+GB is difficult. Your files/data should remain intact, although you'd want backups in any case.

  • Upgraded to CS4, but can't uninstall CS3

    I installed CS4, and then successfully uninstalled CS3 (both versions as full Creative Suites).  I realized, though, that I hadn't saved the actions I had created in PS CS3, so I reinstalled PS CS3 (and found the PS CS3 Actions Palette.psp file, which had my custom actions, from a backup I had made). I exported the custom actions to .atn files, and then imported them into CS4.  So far, so good.  But...  Now I can't uninstall CS3!  It doesn't show up in my "Add or Remove Programs" dialog (either as the full Creative Suite, or as the individual component programs).
    I suppose I might be able to solve this by completely uninstalling CS4, which would leave only PS CS3 (and a few other of the CS3 programs, which were also reinstalled) -- and then maybe it would show up in Add or Remove Programs.  (And then I could -- I hope -- uninstall CS3, and reinstall CS4.)  But if someone has a simpler solution, I'd greatly appreciate hearing it! 
    To summarize the key actions, here's what I did:
    - Already had Creative Suite CS3 installed
    - Installed Creative Suite CS4
    - Uninstalled Creative Suite CS3
    - Reinstalled PS CS3 and a couple other CS3 programs
    - Exported some files I needed from CS3, and imported them into CS4
    - Now I can't uninstall CS3
    Thanks,
    Steve

    You have created a fairly unusual situation!
    I would first try runnning the CS3 Clean Script to see if that can remove it without damaging the CS4 installation. It may not.
    Otherwise I can only think of:
    Un-install CS4 normally
    Run CS4 clean script, a couple of times if necessary.
    http://www.adobe.com/support/contact/cs4clean.html
    It should also detect CS3 remnants , if not run CS3 clean script.
    http://www.adobe.com/support/contact/cs3clean.html
    Manually remove any Adobe folders remaining – they may be in more places than C:\Program files!
    Run a good registry cleaner like CCleaner.
    Start again with a fresh installation.

  • Upgraded to CS3 to CS4. Can I uninstall CS3?

    Several years ago I upgraded to CS3 to CS4. CS3 was not removed. Can I uninstall CS3?

    For both CS3 and CS4 the better capture tools are:
    For HDV: HDVSplit
    For SD: Scenalyzer
    This may avoid the need to reinstall CS3 and possibly messing up some registry keys.

  • Installed Leopard on new drive, now can't uninstall CS3

    I deactivated CS3. Then I installed Leopard on a new drive and it moved over all my stuff from Tiger, including CS3. Of course, due to the idiotic policy that allows you to run 2 copies, but not on the same computer, it won't start. Then when I went to uninstall CS3 using the proper uninstall in Utilities, I got a message that says "System Requirements Error - This software cannot be installed because the file system of the OS volume is not supported". What the heck is that? I have NO way to uninstall CS3? Why the restriction on two copies on one computer anyway? What if your current drive fails unexpectedly? How do you deal with that?

    I have a perfect copy of the boot drive elsewhere on my system. I can boot from it in an emergency. But Adobe tells me that the copy of PS CS3 on that drive is not supposed to work. I called because I had the problem where it dies instantly as soon as you start it. I know the copy was good because I just tested that yesterday, again, during my song and dance to get PS on a non case sensitive drive. PS came up and ran from the spare drive I used as an intermediate Leopard > spare > Leopard. I didn't activate it there but did as soon as I was back on the modified Leopard drive and it's fine. I would say from my previous experience that if I were to boot back to spare and try to start PS, it would now die instantly because it's the second copy and hasn't been activated FROM THAT DRIVE. If I try to activate it I'll get some garbage about too many copies - I don't recall what they said exactly. The gist of it was 2 copies, 2 computers - fine. 2 copies one computer - not OK.
    You say you had 2 copies activated on one computer? How? In my experience, the second copy dies so fast you couldn't get to activation. I'm not doubting you, I'm genuinely curious how it can work. I'm on a Mac Pro, if that's of any import.

  • Activation: how can I recover from a hard drive crash?

    My hard drive crashed on me...  All my data is safe, but now I have to figure out how to reactivate both Lightroom 3 and CS3.
    I have rebuilt the failed machine with a new hard drive, but it was getting rather old so I also took the opportunity to purchase a new machine.  My intention is to get Lightroom and CS3 installed and registered on the new machine.  I understand that under normal circumstances I could deactivate Adobe products on the old machine, install and reactivate on the new machine.  But since I rebuilt it, the old machine doesn't actually have Lightroom and CS3 installed and activated -- no activation, so no chance to deactivate.
    I see two options.  Which is easier?
    I could reinstall both Lightroom and CS3 on the old machine, activate them, then deactivate them, then install and activate on the new machine.  If I reinstall and reactivate on the old machine, will Adobe's activation service recognize that I'm reactivating on a machine that already had Lightroom and CS3 installed (everything is the same except the hard drive)?  If not, will I be able to activate since I will be trying to activate an already-activated license?
    Alternately, I could just install on the new machine and attempt to activate there.  I expect I'll run into problems, again because I'm trying to activate with a key that was used to activate on a different system.  I expect I'll have to phone into Adobe to clear this up.
    I'm concerned that if I take the wrong path it will make it more difficult to get everything working in the end, possibly to the point where Adobe will refuse to allow me to activate my licences on my new machine.  Does anybody have any advice?
    Thanks.

    Since CS3 is not a shipping version there is NO activation needed, only the current shipping version. Install CS3 and insert the serial number.
    Do the same with LR. No install, uninstall, gymnastics needed nor phone calls to Adobe Tech Support.
    I did this when my power supply shorted and took the whole machine up in smoke, all four hard drives worth. When I got the new computer I just installed CS2 with the license and no activation needed.
    Rich

  • Help reinstall cs3 from hard drive crash

    I have cs3 installed on a pc and a laptop. My laptop crashed so I installed a new hard drive. When I went to reinstall cs3 an error message came up saying it can't complete installation due to licensing. I have to deacivate any of the previous unused licenses to be able to reinstall right? Any help on how I can do this? Or is there something else I have to do?
    Joe

    The one on the laptop activated fine but the PC one says: the maximum number of activations have been reached then it tells me to deactivate or to buy a new license
    Which doesn't make sense because before the hard drive crashed i had cs3 installed and activated using the same serial number on both the PC and the laptop.

  • How can I tell if my hard drive crashed

    I've had my MacBook for slightly more than one year and for no reason that I can think of it will only boot up to a screen that looks like an apple with a problem. I took it to an Apple store and they told me that he hard driv crashed and it would cost $700 for a new one. I paid $1000 for it brand-new. Any suggestions to determine if it is the hard drive and how I might be able to salvage what's on it/get it going again? Please help!

    Try this first:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    This will erase any data stored on the drive, so I hope you have backups.
    If the drive still cannot be made functional or the SMART status indicates the drive is failing, then you will need to replace it. It won't cost $700 and you can do it yourself: MacBook (13 inch) Hard Drive Replacement Instructions (Do it yourself Manual).
    Replacement drives can run from $50 to $350 depending upon size, make, model, and speed. You can find replacement drives at OWC. Your computer can use any 2.5" notebook SATA drive up to 320 GBs. Only Samsung makes a 500 GB drive that will fit in a Macbook.

  • Can I uninstall cs3 now that I've installed cs5

    I'd love to free up space on my HD and simplify my system by uninstalling cs3, but I'm not sure whether that's a good
    idea now that I've installed cs5. Is it ok and is there any special precautions that should be taken?
    Suggested procedure?

    If you have the Mac version, yes, Windows, no.  Also with the Mac version there are folders in the Library->Preferences and Library->Application Support folders which are related to the old version.  They are extremely small but you can delete them if you want.  Just make sure you delete the files related to the old version and not the new one.  Most are marked by the version number not the release number, ie: Dreamweaver CS5 = 11, CS3 = 9.

  • Can't uninstall CS3... no error, just nothing happens

    I'm trying to uninstall CS3 in preparation to install CS5... But nothing happens. I click on CS3 in Programs and Features and then click uninstall. I get the small blue wheel by the cursor for a few seconds then nothing happens. no error. no message window. nothing.
    I once got a message that said the uninstall failed due to a "database error"... but now I'm getting nothing and I can't seem to reproduce the circumstances of that original error.
    Adobe support won't help with CS3 and their "Cleaner Utility" is not available for Windows for at least a month (so they tell me).
    Any tips?
    p.s. - using Windows 7 64bit

    Try to manually delete all entries pertaining to Adobe using the Microsoft Installer Cleanup Utility, then delete the caps.db manually as well. More info here. Just be aware that this will really ruin all Adobe software and you must reinstall everything, including minor tools such as AIR, Flash Player and Adobe Reader.
    Mylenium

  • Can't uninstall CS3

    I recently installed CS5. I want to
    uninstall CS3 so that when I edit a photo in Elements 8.0 using Photoshop it goes into CS5 and not CS3. I went into Control Panel, Add or Remove Programs, and clicked on CS3. When I did this, the screen froze up, and I had to restart the computer to get out of it. I tried this twice, and the same thing happened the second time. I experimented with removing a different old program, and it uninstalled just fine. How can I get rid of CS3 if I can't remove it using the Add or Remove Program function???

    All wrong! The mess is between your different versions of your Adobe programs. you need to uninstall them all and then reinstall in correct order. Just removing CS3 won't fix anything, anyways, as it will destroy any file associations also for CS5 and possibly PSE8. So you'd be doing more damage than good... Use the CS5 Clean Script (which also applies to CS3 and CS4) to remove programs if the installers don't work.
    Mylenium

  • Installed CS4, can't uninstall CS3

    Hi. I had CS3 installed, and then installed CS4. CS4 seems to be working fine, so now I want to unistall CS3.
    Unfortunatley, in Add/Remove programs, there's no uninstaller for CS3! There's one for CS4 though.
    How the heck do I uninstall CS3 if there's no uninstaller?
    I have Vista.
    Thanks
    Doug

    I understand there isn't a requirement for removal of CS3, I just don't need it any longer.
    I don't have an option in Add/Remove for Adobe Creative Suite 3, only CS4.
    I suppose in order to clean up, I may have to remove CS4 and then attempt to remove CS3, then reinstall CS4.
    I could be asking for more trouble than it's worth though.
    Is there an uninstaller out there I can download?

  • Can't transfer purchases after hard drive crash

    My hard drive crashed and it took my library with it.  When I try to sync my iPad2 I get the message that I need to transfer purchases from the iPad to the PC.  I do that, but it gets stuck on step 4, the wheel keeps spinning but goes no further.  I've seen this question asked here in the past, but don't see any answers.
    Anyone know how to fix this?  Any word from Apple?

    An hour is way to long to be on that step. I have seen it take 5 or 6 minutes on my Mac and thought that was an eternity.
    Are you using Windows? I'm thing maybe a fresh install of iTunes might help and my other thought is that your backup is corrupt.
    I just found this in another discussion if you are running Windows.
    1. Quit iTunes.
    2. Start Menu -> All Programs -> Accessories -> Right Click "Command Prompt" -> "Run as Administrator"
    3. In the command prompt type "netsh winsock reset" and hit ENTER.
    4. Reboot your machine.
    5. Restart iTunes
    i know this only works on windows but it may help those that have this issue on a PC.

Maybe you are looking for

  • How to create a hint for a component(awt),thanks

    How to create a hint for a component(awt),the component of awt has not the property.

  • Small photoshop files aren't aligning in FCP

    i' m using final cut pro 3 and photoshop 7. my problem is when i create a 720x480 72dpi PSD file with a a tiny image, it does not line up in its proper position after being imported into FCP 3. it does line up in other applications, such as after eff

  • Image in a mail

    I want to construct an image Object with a .gif or a .jpg attachement without write anything in the hard disk. Is it possible can anyone help me please?

  • Reciever Determination error

    Hi, My scenarion is File->XI->FILE based communication. I am using the SAP XI3.0 SP12. I am testing the configuration in the Integration Directory(ID) using the "Test Configuration" functionality in 'Tools' menu of ID.I am getting an error at step 2:

  • One PI system for Dev, QA and Prod..possible?

    Hello Experts, I have been told that there will be just one PI system, for development and the same has to be used as QA in IST and for Production... I have 4 scenarios , 2 are JDBC to Proxy and 2 are file to proxy.. Hence, I have to connect to ECC a