Can't unlock ipod touch tried to restore it and still won't unlock

can't unlock ipod touch tried to restore it but it still won't unlock

Place the iPod in recovery mode and then restoe the iPod via iTunes.  For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Similar Messages

  • I can't open my iPod Touch - tried the restore message and then error mewssage 3014 - iOS problems???

    I can't open my iPod Touch - tried the restore message and then error mewssage 3014 - iOS problems???

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I just want to ask if there is any way i can fix my ipod touch 4G from watar damage and i dont think that a larg amount of water have entered and the ipod isnt working at all and i tried charging it but it didnt work so please help me, and thankyou.

    I just want to ask if there is any way i can fix my ipod touch 4G from watar damage and i dont think that a larg amount of water have entered and the ipod isnt working at all and i tried charging it but it didnt work so please help me, and thankyou.

    Probably dead if you have tried to charge it.
    You should never try to charge or turn on a wet electronic device.
    You should let it dry for  a week or so, then try.

  • HT201263 My ipod touch does not restore properly and comes up with an unknown error (9). What do I do?

    My ipod touch does not restore properly and comes up with an unknown error (9). What do I do? I have tried restoring it a few times and it keeps coming up with this error. Yet on Itune on my computer, it tells me that the ipod software is up to date. ipod screen is just showing the itune logo and a usb connector.

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    http://support.apple.com/kb/TS3694#error9

  • How can you connect iPod touch or iPad to TV and watch it what kind of connection?

    How can you connect iPod touch or iPad to your tv and watch it

    Not really anything to do with Apple TV
    If you want to connect an iPad or iPod
    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter

  • How can I unlock ipod touch 5th gen currently disabled and never sync'd with itunes

    Basic situation. Ipod touch 5th gen. Passcode forgotten and tried too many times such that ipod is disabled and requested to connect to iTunes.  Problem is that the ipod was never sync'd with iTunes so the connection fails.  I've only owned it for 9 months or so.  I know I can recover all my music through iTunes and my applications through the app store since all of my content was legally purchased.  The problem is that I need to also recover my contacts and pictures since this is the only place they exist.
    I have read about methods up to 4th generation where you can access a particular file on the device via computer and rename it to unlock the device. That would most likely allow me to then sync/backup via iTunes and recover my data.  Problem is that I can only access the DCIM folder via windows manager and it contains no data. Perhaps there is a way to access the device a different way?
    Is there a way with the 5th generation to either reset the lock (from disabled to locked with a 1 min wait for retry as an example) to allow me more opportunities to try other passcodes that I may have set (including mistypes etc) or to remove the passcode completely and let me set it to something I will write down this time?
    Please do not reply with the standard apple responses of 'sync with itunes' or 'factory reset' and no, I did not sync with the icloud either (I tried but it was unsuccessful for some reason).
    The answer doesn't even have to be a free one as I would be willing to pay for the solution if it were guaranteed to work.  Since apple seems to want to charge for any type of support, even to ask a question, I am relying on the community for help.  Thanks much.

    You have to place the iPod in Recovery mode as Apple says and erase the device. It is a security feature.
    or
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    There is not other way

  • My iPod Touch is in Recovery Mode and iTunes Won't Detect It ?

    iPod Touch 4G
    iOS 5.1
    Purchased 2010
    I Opened Up iTunes and Upgraded to iOS 5.1.1 from 5.1 as a "Download Only". The Next Morning I Go To My Computer Plug In My iPod and Update. My iPod Then Goes into Recovery Mode and When I Quit Recovery mode It goes straight to recovery mode again with and without the cable. iTunes does not detect it when i plus it in and neither does my computer, i have tried restarting apple mobile support and that does not work. The nearest apple store is 20 miles but i could go there.

    See if you can kick it out of recovery mode with RecBoot.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • IPod Touch Stuck on Apple Screen and iTunes won't recognize

    I was resetting my ipod touch to clean it off to give to my sister. I thought it was plugged in, but turns out it was not, so the battery died while it was resetting itself. Now it is stuck on the apple screen. I have tried everything to reboot it and get iTunes to recognize the device, but nothing has worked. I had my computer cleaned, so iTunes is brand new and has never been hooked up to this iPod Touch. I need help please!!

    TRy placing the iPod in DFU mode and then restoring. See:
    http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

  • My iPod touch 5 suddenly quit working and it won't charge.

    My 5th Generation iPod touch suddenly quit working. I try to charge it and nothing happens.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Did updat ios6 now my ipad won't work also tried to restore it and that won't work either

    ipad 2 is not working thanks to the new great update, have tried to restore it 3 times now and it still will not work

    The only thing that I can suggest is keep trying - or try it on another computer.
    Did you try rebooting the iPad? Hold down on the sleep and home buttons until the Apple logo appears on the screen. Maybe if you reboot you will be able to restore.

  • My iPod won't charge and start, t happened when i came home from camp. it puts the apple sign but it just stays there i tried lots of cords and still won't start, whats going on

    My iPod won't start up when my battery died i tried charging it and it won't start. I trird various cables. It has the apple sign on it though. It turns on but stays on the apple sign. I charged it over night too... Doesn't work :(. Please help!

    If you are stuck on the Apple log you may need to restore.
    Before you do, try this
    Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears
    If that doesn't help, restore:
    Restoring iOS Software

  • Evrey time i download the stuff so i can ad my ipod touch it wont add it and says i need to download 10.1, evrey time i download the stuff so i can ad my ipod touch it wont add it and says i need to download i tuns10.1

    i cant add my i pod touch 4th gen to my i mac it keeps saying that i need itunes 10.1 and i keep downloading it but it just will not let me do you know how i can add it

    Try restarting your iPod. Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    Tap the App Store app. See if you can download apps.

  • I am trying to sync my iPod touch with my macbook pro and it won't work?

    When I try to sync it it asks me to transfer purchases to it and so I click transfer and then it brings this message up...
    "there is ot enough free space to hold all of the items in the itunes library (additional 5.40 GB required)
    is their a way idk I can increase the space allowed or something. why does it have a limit?

    See Here
    'Not enough free space' alert when trying to sync
    From Here
    http://www.apple.com/support/ipodtouch/syncing/

  • My daughter has forgotten her passcode for her Ipod Touch.  I restored but it still comes up with wanting to know a code.  What do I do now?

    What do you do after you have restored the Ipod and it still asks for a passcode?

    See Here...
    http://support.apple.com/kb/HT1808
    If you cannot remember the passcode, you will need to restore your device on the computer that you Usually Sync with...

  • HT201412 My 4th gen iPod touch was docked, it stopped and now won't turn on.  HELP!?!?

    My iPod was full charge, I was playing some obnoxious band, all of the sudden it stopped playing, the screen was gray.  I undocked it, and tried to reset it.  Now it won't turn on.  I've had it plugged into both the wall and the computer.  Any suggestions???

    See:
    iOS: Not responding or does not turn on

Maybe you are looking for

  • How can I get my MAC iMessages to work again?  (is IOS 7.0.2 to blame?)

    So, armed with an iPhone 5 (orig) , iPad (4th Gen) and an iMac running OS X 10.8.5 it appears that my iMessages on the desktop no longer work. This is apparently coincident with my upgrade of the handhelds to IOS 7.0.2. Alas, I am no longer in sync!

  • Error while running tutorial test page....:(

    Hi All , i m working on OAF 12.1.3 & downloaded p9879989_R12_GENERIC (after checking from metalink 416708.1 note) for jdev completed successful setup still not able to run test page in jdeveloper... Plz reply asap as i have to work in strict deadline

  • Cash discount - F-28 - how to control Active / Inactive setting

    Hi All, When I try to post incoming posting through F-28 for a customer and choose the open items, the cash discount value is INACTIVE. But when another user tries to post incoming payment for the same customer, Cash discount value is ACTIVE. We are

  • SAP BPM

    I am working as a SQL SERVER developer. I want to continue my career as Business Analyst. When I was searching for some BPM (Business Process Management) materials, I came across this SAP BPM. Can someone give me a basic idea regarding this "What is

  • SAP Business Explorer 7.0 availability

    Hello Expert, We've migrated BW 3.5 query in BW 7.3 SAP System. Dataflow migration was successful but Query Designer 7.3 product version not compatible with BW 3.5 Query. Have found from SAP  SCN  thread  that firstly we need to install BEX tool 7.0