Can't unlock Keychain

My keychain is locked, and none of my known passwords work. I followed the steps to change password, but it wants the old password and keeps telling me what I put in is wrong. I reset the administrative password with the install disk, then tried to reset the keychain to default factory settings. Is there a default password, because after I "reset" it, it asked for a password, and I typed everything I could think of, and nothing works.
I looked on the old postings and tried those steps, but they didn't work for me.
Can you help?
Joanne

Eme:why did you direct Joanne to make a new post in installation & setup, which makes sense & then to unix ?Actually, Joanne had posted in a topic which had been answered. I suggested she start a new topic. She started a topic in Installation and Setup, but it was getting no response. I thought that there may be some Unix approach using terminal commands to get her into her locked keychain. Maybe I don't know enough about Unix to refer people. Sorry if I misdirected her. Her post in Installation has not been answered either, the last time I looked.
cornelius
Pismo400, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS (10.4.4) Mac OS X (10.3.9) Beige G3 OS 8.6

Similar Messages

  • Can I unlock keychains permanently?

    Since I'm the only user on my computer, I'd like to unlock all keychains permanently so I don't have to go through the rigmarole every time I open Mail.
    This is a new problem because I was trying to learn what keychains were all about and I evidentally did something wrong. As so often is the case with the Mac, a little knowledge can be dangerous.
    Thanks!

    Thank you all for your answers, but I found the solution to my particular problem in the Help section of Mail. It's called "Mail keeps asking for my keychain password." The advice tells you how to change the keychain lock settings, and so far this answer worked for me.
    I should have been more specific that it was Mail that was giving me the most problems.
    I do appreciate your taking the time to help out and your solutions will likely help others with general keychain problems.

  • Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!! :(

    Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!!

    Hi
    You need to check with your ISP whether or not the send mail server (SMTP) requires a password.  Some do, but many do not.  When you know the correct password to send mail, then you need to tell Mail as follows:
    Mail menu > Preferences > Accounts > Select the account
    Click on the Outgoing Mail Server (SMTP) combo box, and select Edit SMTP Server List...
    In the Account Information tab put the server name
    In the Advanced Tab, set up the authentication information from your ISP.
    Good luck
    Bob

  • ADMIN CAN'T UNLOCK SYSTEM PREFS!!! THIS IS A BUG, PEOPLE!

    Ever since I upgraded to Maverick, I haven't been able to change my locked system preferences. They just won't unlock, no matter what I do. Everywhere I've gone to get some clarity on this problem, all anybody asks is if I'm the Admin, like I'm some kind of moron who doesn't know that if you click the lock and enter your password, the lock will unlock. Yes, I'm the Admin, mine is the only account on my MacBook Pro, everything worked fine before I upgraded, and now what I get is this:
    http://www.youtube.com/watch?v=ubGAD-v_ODs
    For those of you who require a visual of the problem to see that it's NOT happening because users just don't know how to work the lock, I beg you…please look at this 7 second YouTube video. Every lock in system preferences behaves just like this. That's the only consistency I've found. I've been researching this for days now and while it seems that tons of people are having the same problem, completely unable to either lock or unlock their preference settings, nobody anywhere seems to have a clue as to how to definitively fix this problem. It's not Maverick because I've read posts from other users who are complaining about the same behavior from Lion and Mountain Lion. I've exhausted what little Unix I know with killall commands and I'm tired of shooting in the dark, trying solutions that work for some people but haven't worked at all for me.
    I'm not a new user. I've been using Macs since the first Macs came out, so I know how to click the lock to change my preferences. It's not my keychain as I've already done repairs on that. I've restarted every time I tried something new, but that didn't help. The fixes that I've read people have tried and found success with are not consistent and none of them have worked for me.
    I'm just guessing but in my opinion, the most likely reason for this is that something has gone horribly wrong with my permissions. I'm just not sure how to fix that, assuming my permissions are even the problem. And since everything was fine until I upgraded to Maverick, my best guess is that it happened during my last system update. It would explain why sometimes the fixes people are trying work and sometimes they don't. Maybe the update changed different settings for my Mac than the people who've fixed their issue had. I'd love to know if anyone else noticed that the problem started right after a system update, particularly since it's also happening to people who are using older OS versions before Maverick.
    But more than that, what I REALLY want to know is how to fix this. I don't want to keep randomly trying stuff. I need a good, clean fix. Since none of the Apple experts here seem to have any idea as to even why this is happening, much less how to solve the problem, I can only conclude that THIS HAS TO BE A BUG and the only fix is yet another system update that patches whatever is making this lock thing happen. Could it be an installer issue that's fouling things up? Could it be a problem with the App Store's delivery of the updates? I sure hope somebody finds a solution real soon, because while I can't unlock my prefs, at least they're locked. I really feel bad for the people who can't lock theirs. I really believe that the two problems are related.
    CAN ANYBODY TELL ME WITH ANY CERTAINTY HOW TO FIX THIS AND WHAT TO DO TO KEEP IT FROM HAPPENING AGAIN?!!!
    (sorry for all the caps )

    Hi Mac Warrior,
    I have the same issue. Just after a restart, everything works but after few minutes, the issue comes back.
    Moreover, when I try to switch to another user account, a white screen appears without the possibility to do anything else than using the power button to shut it off.
    I hope a fix will come faster.
    Not sure that will help but I have error logs when I open User preferences :
    31/10/2013 09:14:56,897 System Preferences[4094]: Preference bundle "/Library/PreferencePanes/HyperDock.prefpane" is missing identifier
    31/10/2013 09:14:57,198 com.apple.preferences.users.remoteservice[4098]: assertion failed: 13A603: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
    31/10/2013 09:14:57,224 com.apple.preferences.users.remoteservice[4098]: assertion failed: 13A603: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
    31/10/2013 09:14:57,655 com.apple.preferences.users.remoteservice[4098]: Bogus event received by listener connection:
    <error: 0x7fff72b19b50> { count = 1, contents =
              "XPCErrorDescription" => <string: 0x7fff72b19e60> { length = 18, contents = "Connection invalid" }

  • Unlock Keychain

    When I am in Safari I get a popup that says UNLOCK KEYCHAIN and then in the popup window it says Enter Keychain Password. I don't know my keychain password, and sadly, I don't know what a keychain is. I just click cancel and then it pops up again and I click cancel again and then it goes away (and pops up again every 10 minutes or so). How can I make it stop!

    Hi Martha,
    It seems that your Keychain settings have been changed. Keychain (Applications > Utilities > Keychain Access) manages the passwords on your Mac. The fact that it keeps asking for a password could mean that your Keychain has been set to lock after a short period of inactivity.
    Unfortunately to fix the problem you would need to know your password but, if you didn't set a system password it could just be that your can leave the field blank and press enter.
    You should be careful when using this utility as you could do more harm than good. If you feel you are in over your head best if you can get some help from an experienced user.

  • Annoying "unlock keychain" message

    Whenever I use safari it periodically interrupts asking me to unlock keychain by entering a password. I have turned off all keychains as far as I can tell, and all I need to do is hit "cancel" and it goes away, but then if I am surfing pages it will come back. Is this some kind of annoying Safari virus? It obviously does not require a keychain password because it goes away when I hit cancel, and I had turned off all keychains anyway. It does not stop me from doing what I want to do but it is annoying. Any ideas to get rid of it?

    robphoton Hello & Welcome to Apple Discussions.
    Sounds as if iKeychain Access, wants to use a password for a site you
    might have autofill turned on for. Do you have Autofill enabled if yes
    deselect it and see if that helps. Or unlock keychain access so that it
    maybe accessed by the site. Check in autofill "edit" button and see if there
    any site you might want delete from using User names & passwords
    or Other forms
    Hth.
    Eme
    edited by: Eme

  • I inherited an iMac from my brother-in-law who removed his password and can't remember the temporary one he put in.  How can we unlock the computer?

    I inherited an iMac from my brother-in-law who removed his old password and has forgotten the temporary one he installed.  How can we unlock the computer?

    Resetting or changing a password:
    For Snow Leopard or earlier:  http://support.apple.com/kb/HT1274
    For Lion or later:  http://support.apple.com/kb/HT6022
    This is also useful:
    http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
    If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
    If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
    https://discussions.apple.com/docs/DOC-4101
    If it the Keychain password that needs resetting:
    http://support.apple.com/kb/ts1544
    If the computer has a firmware password set, contact Apple.

  • Can not unlock the purchase in the free game

    can not unlock the purchase in the free game

    Hey there LaughHim,
    It sounds like you are unable to make an in app purchase. This may be restricted in your iOS settings, and this article will help you check that out:
    Restricting In-App Purchases
    http://support.apple.com/kb/ht6088
    If this is not the case, would you mind clarifying what is happening when you try to make this purchase such as any error messages you are getting?
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Why I can not unlock the record when close a page?

    I develop a jsp page as client,the jsp application use a business componment with statefull application module.i call a database rowset's lock function in jsp page to lock a record,now,after i close the jsp page without commit and rollback,the record is not unlocked,until i restart the oc4j application server.how can i unlock the record when close the page without commit and rollback?????

    Li Ping:
    If you lock a row in the course of a transaction, you cannot unlock the row until the end of transaction (either rollback or commit). DBMS doesn't allow this.
    Alternatively, you can try to delay locking of the row. E.g., you can try using optimistic locking. Please see the Java Doc for oracle.jbo.Transaction if you're interested in optimistic locking.
    Thanks.
    Sung

  • HT1414 My iphone 4 is stuck. master reset did not work. won't slide to unlock and if do get to the passcode screen, it won't recognize my entries.  I have tried connecting to itunes through a pc, but since I can't unlock my phone it won't let me do it the

    Iphone 4 is stuck.  I have tried a master reset and it didn't work.  it won't slide to unlock or power off.  I did somehow get to the passcode screen but it didn't let me enter anything.  I have also tried on a pc through itunes but since I can't unlock it, it won't let me do that either.

    http://support.apple.com/kb/ht1808

  • Can an unlocked at&t be used on verizon now that verizon is using SIM's?

    Can an unlocked AT&T Galaxy s4 be used on Verizon now that Verizon is using SIM cards?

    No, because the AT&T model doesn't have the CDMA radios for the voice network that Verizon Wireless uses. The data probably won't work either because AT&T and Verizon Wireless uses different frequencies for their data networks.

  • My Ipad is in a locked rotation.  How can I unlock it?  carolynmunson

    My Ipad is in a locked rotation.  How can I unlock it?  carolynm.

    Is there a lock symbol at the top of the screen next to the battery indicator ? If there is, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If there isn't a lock symbol then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ipad disabled. How can I unlock without restoring on Itunes? Need the photos

    My daughter disabled my Ipad. Now it says to connect to Itunes and does not even allow me to put in a code. I have many photos and videos saved on my Ipad I wish not to erase. Any way to unlock the ipad without having to restore it through itunes? Or some how pull photos and videos prior to restoring? Any help please. Thank you. CHRIS

    When you have important videos/photos on your iPad, you should backup frequently.
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My ipod is locked. I have forgotten my password. How can I unlock it?

    I have forgotten my password. Have tried combinations and now my ipod is locked.
    How can I unlock my Ipod?

    You do not have to restore as new.  You can restore fom backup since the screen-lock passcode isnot in the backup.  ALso, if  iTunes asks for the passcode andyu can't enter the passcode place the iPod in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    ckuan wrote:
    You have to connect to iTunes and restore as new.

  • How can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    how can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    Hi,
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • Info record update check box in Po

    Hi, We are working in ECC 6.0 envirnmoment and our project is trying to explore the functionality of PIR. The problem is I am not able to see info record update check box in the material data tab of the PO. I did not get any configuration in SPRO to

  • How to upload a calculated value

    I am a beginner Dreamweaver CS4 user and I am building a website with PHP and MySQL. My issue will be probably easily solved by any experienced DW user but I couldn't find a solution in tutorials and specialized books. I have to sell a product and I

  • Re: WO E-Signature Approval

    Hi all, I had setup an approval Work flow for both Work order release approval & work order completion in EAM. As far as WO Completion approval is concerned it requires an e-signature approval also via ERES. But while trying to complete the WO, there

  • Dreamweaver CS6 installation

    How do I load my new Dreamweaver CS6 onto my new computer that does not have a disk drive?

  • ERPi and FDM with concatenation

    Hi folk. I'm using EBS/ERPI/FDM/Planning 11.1.1.3 and I've concatenated 2 GL segments in 1 dimension entity. In the metadata rule I used this option plus a prefix E, but in FDM, after import I've had E1111_222222, instead of E1111222222. How to disap