Can't unlock my SIM with its PIN (iPhone 4S in Germany)

I'm a T-Mobile Germany customer and I can't unlock my SIM card with the PIN number in my iPhone 4S. I can unlock the SIM card just fine in another phone, and it works without problem in my iPhone 4S as long as there's no SIM PIN on the card, but attempting to set a PIN on the card causes the phone to just sit there and wait and wait.
T-Mobile Germany stated that they are working with Apple regarding some kind of SIM PIN related problems (dropped calls, no SMS messages, etc..) on the iPhone 4S, but they state that it's not a T-Mobile problem (other carriers have it too), nor is it a problem with the SIM cards. That means there's a hardware/software fault on the iPhone 4S, and if that's true, then it must affect people outside of Germany.
Is anybody else experiencing SIM PIN related problems with the iPhone 4S? Anybody who doesn't live in Germany/didn't get their phone from Germany?

hello i am using 5.0.1 iphone 4s for about 2 months. Last night i spoke with my friend and the morning my signal looks like 5 bars but i noticed that i couldn’t make a call the phone freezes and i couldn’t unlock my sim card.
i tried t restart my phone 3 times but nothing i changed the sim 2 times and put my original sim back and works but today the same problem.
ok i unlocked my sim card after 3 restarts but with 5 bars carrier  cant make cals Any solution ?

Similar Messages

  • New Iphone 4 factory unlocked: "No SIM" "Insert Valid SIM with no pin lock"

    Hi, I'm new in the forum.
    I've just bought a new factory unlocked Iphone 4 from a top rated seller in USA, came back to my country, inserted my Sim in the Iphone, and got the message:
    "No Sim" "Insert valid sim with no pin lock to activate Iphone"
    This Sim I was using in my old Iphone and actually in a Blackberry Storm.
    After the message I put it back again in the BB, and it works fine.
    But in the Iphone I get always this message.
    One thing: My SIM is a regular one, and I had to use a tempalte available in the net to cut it into a micro SIM.
    In the BB it keeps on working.
    Any idea?
    Thnak you
    Luis

    I answer your question:  I buy a lot of things from ebay, and I just looked for "an original factory unlocked" one, assuming their are original, just that.
    If I had known I could have bought it CHEAPER directly in Apple, I would have never done it in ebay! (I was told in my country that if you buy in the web, normally you get a discount, sound logic to me.
    On the other hand I saw that this seller sold over 1000 Iphones and I trusted that's all.
    I'm not dealing with phones, I sell art.
    Anyway I still trust what is written there, that they are factory unlocked, and I'll try what you say tomorrow with my carrier: I'll buy a micro sd, and if it still doesn't work, I'll write this seller to see what's going on
    Thanks for your advice
    Luis

  • HT2731 i hav iphone and i restart it and delete all the files inside how can i start again my iphoe it say i need a valid sim with no pin lock to activate it again pls help

    i hav iphone and i restart it and delete all the files inside how can i start it again it say i need a valid sim with no pin lock to activate iphone again

    ICCID unknown is a critical failure, usually caused by hacking or jailbreaking the phone. It can not be fixed. The phone will need to be replaced.

  • No SIM card installed insert a valid SIM with no pin lock to activate iphone

    Dear Sir, Recently I noticed that my iphone 3GS is responding very slowly, I thought it got hanged due to the high memory usage so I restarted it but after the restart it showed me iTunes logo & a USB cable. Though the SIM card inside the phone doesn’t have any lock but the message says: No SIM card installed insert a valid SIM with no pin lock to activate iphone. When I connected it to itunes I get this message: iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes, there was a passcode on my iphone which can not be unlocked now as after sliding the arrow the only options I get are: emergency calls & info’s  as IMEI: 01 215500 xxxxxx x & ICCID: Unknown. I was suggested to delete the complete programme & get the iTunes reinstalled but I don’t want to lose my data. Can you help me to get my data back? Pls. reply ASAP. Thanks & regards.

    ICCID unknown is a critical failure, usually caused by hacking or jailbreaking the phone. It can not be fixed. The phone will need to be replaced.

  • Hi i ve iphn 5 with t.mobile.. iwanna put anothr sim in it..it saying instal valid sim with no pin lovk to acti vat...wht i ve to do..plzz let me know...

    i wanna put anothr sim in it..it saying instal valid sim with no pin lovk to acti vat...wht i ve to do..plzz let me know    help me

    Only the cell carrier to whom the iPhone is locked can authorize unlocking. You will need to contact T-Mobile and as them about getting your iPHone unlocked.
    Regards.

  • Insert valid sim with no pin code

    i buyed iphone 4s ....i updated it to ios 5.0.1 now it starts from start screen and says insert valid sim with no pin code....what does this mean i inserted many sim cards but not working ....m stuck at activation screen n cant do anything...my baseband is 1.0.13 and having model 9A405

    It is what I thought already. The problem is, that when you buy a second hand iPhone, you never know what someone did to it. A jailbroken iPhone you should never try to update, because then it won't work anymore. You can use it, but NEVER try to update. This was a painful lesson, I feel for you. In this forum you will not find any halp on this problem. You may try in some other forum perhaps.

  • How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

    How can I copy test plan WITH ITS RESULTS (PASS/FAIL) to other project in MTM??

    Hi odedn,
    Thank you for posting in MSDN forum.
    Based on your issue, you mean that you want to copy the test plan with test results from the current team project
    to other team project, am I right?
    If yes, as far as I know that when we copy test plan with test results to other team proejcts. It is default that
    there just will not copy the test plan with test results (pass/fail) to other team project in MTM.
    You can refer the following MSDN document’s
    what gets cloned, it explained that which objects are copied from the source test plan to the destination test plan.
    Reference:
    http://msdn.microsoft.com/en-us/library/hh543843.aspx
    If you still want to this feature, I suggest you can
    submit this feature request:
    http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
    you submit this suggestion, I hope you could post that link here, I will help you vote it.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I unlock an IPod with a locked screen that says Will open in 21,889,406 minutes?

    How can I unlock an IPod with a locked screen that says Will open in 21,889,406 minutes? It was in our companies lost and found a couple years ago. Was never claimed. If I could unlock it, I could possible find out whose it is/was or at least use it. Not sure what model or what operating system it has. Was lost in 2010 in the fall of that year.

    See this Discussion...
    https://discussions.apple.com/message/17137573#17137573
    From the  More Like This  Section on the right...

  • How can i unlock the service with AT&T or other carrier? when i was in overseas ?how much does it cost to unlock?

    how can i unlock the service with AT&T or other carrier? when i was in overseas ?how much does it cost to unlock?

    The only way to unlock a locked device is through the carrier. If it is locked to AT&T, you will have to contact them to get it unlocked.
    Cheers,
    GB

  • Insert a vaild SIM with no PIN lock to activate iPAD

    PUK Locked 
    Insert a valid SIM with no PIN lock to active iPAD
    Unlock

    Your post is rather difficult to decipher. Please state a complete question so that we understand what it is you wish assistance with. Meanwhile, perhaps this will help:
    http://support.apple.com/kb/HT1316
    Regards.

  • Can lost ipod be traced with its serial number?

    can lost ipod be traced with its serial number?

    No.
    - If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
    - Report to police and change the passwords fro all accounts used on the iPod.
    - Apple will not help
    Reporting a lost or stolen Apple product

  • Hello, i tried to update my iPhone 3GS and it work and my phone switched back on but it says insert a valid SIM with no PIN lock, what do i do?

    hello, i tried to update my iPhone 3GS and it work and my phone switched back on but it says insert a valid SIM with no PIN lock, what do i do?

    http://support.apple.com/kb/ts3694#error29
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • HT4061 Can a unlocked (no ATT, Verizon, Sprint plan) iphone 5 bought from an Apple store utilize a phone call while simultaneously checking email, web pages etc.? I know the ATT version can and the Verizon version can't, so can a unlocked  Apple?

    Can a unlocked (no ATT, Verizon, Sprint plan) iphone 5 bought from an Apple store utilize a phone call while simultaneously checking email, turn by turn, web pages etc.? I know the ATT version can and the Verizon version can't, so can the unlocked  version from Apple (which is not yet available) do it?

    The tech specs are identical from both wesites of Vietnam and USA--To add further confusion!
    Apple Vietnam
    GSM model A1428*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE** (Bands 4 and 17)
    CDMA model A1429*: CDMA EV-DO Rev. A and Rev. B (800, 1900, 2100 MHz); UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE** (Bands 1, 3, 5, 13, 25)
    GSM model A1429*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE** (Bands 1, 3, 5)
    802.11a/b/g/n Wi-Fi (802.11n 2.4GHz and 5GHz)
    Bluetooth 4.0 wireless technology
    Apple USA
    GSM model A1428*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 4 and 17)
    CDMA model A1429*: CDMA EV-DO Rev. A and Rev. B (800, 1900, 2100 MHz); UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 3, 5, 13, 25)
    GSM model A1429*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 3, 5)
    802.11a/b/g/n Wi-Fi (802.11n 2.4GHz and 5GHz)
    Bluetooth 4.0 wireless technology

  • İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

    İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

    Hello,
    Try following the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    If that does not help, let me know and I will see what I can do.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for

  • How to display a mssg on page before the adf lifecycle process has ended?

    Hi; We have an ADF Application(11.1.1.3). We sign a document with a mobile signature. To do this we use a webservice call. During this call a hash is generated for the user to check and sign the document. Everything is fine but we couldn't find a way

  • DMS Connector for KM

    Hi All, I'm conneting my NW04 Portal 6.0.11.3.0 KM 6.0.11.3.0 (NW04 SPS11Patch3) to sap R/3 46C I'm able to call RFC function (so my connection'd be ok) but my DMS folder in km is empty. I created also variants KM_... but nothing. Anyone can help me

  • Problem starting Tomcat web server in Ubuntu.

    Hi every one, I use Ubuntu OS.I have installed J2sdk.I want to start tomcat webserver but whenever i start the server I get an error as '/usr/share/tomcat/bin/catalina.sh: line 41: setJava: No such file or directory' I tried removing the line, to fin

  • AIX 5.3 ML3 에 9.2.0.6 patch 시 에러가 나네요..

    error in writing to file 1. /oracle/lib/libvpxoafnd.so 2. /oracle/lib/libxdb.so 3. /oracle/lib/libwtc9.so 4. /oracle/lib/libvppdc.so 5. /oracle/lib/libjox9.a 6. /oracle/lib32/libclntsh.a 7. error in invoking target 'install' of makefile /oracle/netwo

  • Receiving document with AS2 over http

    In Oracle B2B if I have to receive the document with AS2 over http, what can be the URL? The fusion server is running in a linux server. There is a folder in that server where we can preserve the incoming files for further processing.